Cross-brand designation analysis
COMPARE / VERIFY
Same-model Comparison
Explore products that share a base designation across loaded brands, with dimensional agreement and data gaps shown clearly.
Cross Reference centre · Interchange verification checklist · Understand suffix differences
You entered NJ-422. This table explores the base group NJ422; it does not preserve or approve every requested suffix. Search your complete marking first →
Automatic candidate selection
One base designation across loaded brands
Exact designations rank first. Dimensions, suffixes and other technical differences remain visible so the result is not mistaken for an interchangeability declaration.
Dimensions verified
“NJ422” across 4 loaded brands
At least two brands share the same bore, outside diameter and width. Use Custom Compare when you want to choose exact suffix variants yourself.
Technical comparison
Choose exact variants instead →Brand differences at a glance
| Parameter | SKFNJ 422110 × 280 × 65 mm | FAGNJ422-XL-M1110 × 280 × 65 mm | TIMKENNJ422MA110 × 280 × 65 mm | KOYONJ422110 × 280 × 65 mm |
|---|---|---|---|---|
| Comparable specifications | ||||
| Brand | SKF | FAG | TIMKEN | KOYO |
| Designation | NJ 422 | NJ422-XL-M1 | NJ422MA | NJ422 |
| Product family | Cylindrical roller bearings | — | Cylindrical 1-Row | Single-row / NJ |
| Detailed type | Single row cylindrical roller bearing, nj design | Cylindrical roller bearings | Cylindrical roller bearings | Cylindrical roller bearings |
| Series | — | NJ422 | NCS-329964 | — |
| Bore diameterd | 110 mm | 110 mm | 110 mm | 110 mm |
| Outside diameterD | 280 mm | 280 mm | 280 mm | 280 mm |
| WidthB | 65 mm | 65 mm | 65 mm | 65 mm |
| Basic dynamic load ratingC | 523 kN | 680 kN | 663 kN | 685 kN |
| Basic static load ratingC0 | 585 kN | 660 kN | 689 kN | 621 kN |
| Fatigue load limitPu | 64 kN | 107 kN | — | 80.8 kN |
| Reference speednref | 2600 r/min | 2550 r/min | — | — |
| Limiting speednG | 3200 r/min | 4450 r/min | — | 2200 r/min |
| Mass≈m | 20 kg | 22.789 kg | 22.5 kg | 20.2 kg |
| Precision class | — | PN — Normal (ISO 492:2023) | — | — |
| Internal clearance | — | CN (Group N) — Normal internal clearance | — | — |
| Sealing | Without | — | Open | — |
| Cage | Sheet metal | M1 — Two Piece Brass Cage Roller Guided | Window Brass cage | — |
| Lubricant | None | — | — | — |
| Minimum operating temperatureTmin | — | -30 °C | — | — |
| Maximum operating temperatureTmax | — | 150 °C | — | — |
| Additional information | ||||
| L-washer | — | HJ422 | — | — |
| Calculation Factors | ||||
| K Factor | — | — | 0.00 | — |
| Y1 Factor | — | — | 0.00 | — |
| Y2 Factor | — | — | 0.00 | — |
| Y0 Factor | — | — | 0.00 | — |
| E Factor | — | — | 0.00 | — |
| Cg Factor | — | — | 0.1209 | — |
| Capabilities & suitability | ||||
| Radial load capacity | — | Yes | — | — |
| Axial load capacity in one direction | — | Yes | — | — |
| Suitable for grease lubrication | — | Yes | — | — |
| Suitable for oil lubrication | — | Yes | — | — |
| Unsealed design | — | Yes | — | — |
| Classification | ||||
| Official Category Path | — | — | — | Cylindrical roller bearings - Single-row - NJ |
| Official Classification 1 | — | — | — | Cylindrical roller bearings / Single-row / NJ |
| Dimensions | ||||
| Minimum chamfer dimensionrmin | — | 4 mm | — | — |
| Minimum chamfer dimensionrmin | — | 0.157 in | — | — |
| Minimum chamfer dimensionr1 min | — | 4 mm | — | — |
| Minimum chamfer dimensionr1 min | — | 0.157 in | — | — |
| Axial displacements | — | 6.2 mm | — | — |
| Axial displacements | — | 0.244 in | — | — |
| Raceway diameter outer ringE | — | 235 mm | — | — |
| Raceway diameter outer ringE | — | 9.252 in | — | — |
| Raceway diameter inner ringF | — | 155 mm | — | — |
| Raceway diameter inner ringF | — | 6.102 in | — | — |
| Minimum rib diameter outer ringD1 min | — | 220.9 mm | — | — |
| Minimum rib diameter outer ringD1 min | — | 8.697 in | — | — |
| Maximum rib diameter inner ringd1 | — | 170.3 mm | — | — |
| Maximum rib diameter inner ringd1 | — | 6.705 in | — | — |
| Engineering — Abutment dimensions | ||||
| Diameter of spacer sleeved a | max. 151 mm | — | — | — |
| Diameter of shaft abutmentd b | min. 175 mm | — | — | — |
| Diameter of housing abutmentD a | max. 260 mm | — | — | — |
| Radius of filletr a | max. 3 mm | — | — | — |
| Engineering — Associated products | ||||
| Angle ring | HJ 422 | — | — | — |
| Engineering — Calculation data | ||||
| Minimum load factork r | 0.15 | — | — | — |
| Limiting valuee | 0.2 | — | — | — |
| Calculation factorY | 0.6 | — | — | — |
| Engineering — Dimensions | ||||
| Shoulder diameter of inner ringd 1 | ≈ 171 mm | — | — | — |
| Shoulder diameter of outer ringD 1 | ≈ 219.65 mm | — | — | — |
| Raceway diameter of inner ringF | 155 mm | — | — | — |
| Chamfer dimensionr 1,2 | min. 4 mm | — | — | — |
| Chamfer dimensionr 3,4 | min. 4 mm | — | — | — |
| Permissible axial displacements | max. 4.8 mm | — | — | — |
| Logistics | ||||
| Product net weight | 20.0 kg | — | — | — |
| eClass code | 23-05-09-01 | — | — | — |
| UNSPSC code | 31171505 | — | — | — |
| Main Dimensions & Performance Data | ||||
| Basic dynamic load rating, radialCr | — | 680,000 N | — | — |
| Basic dynamic load rating, radialCr | — | 152,877.698 lbf | — | — |
| Basic static load rating, radialC0r | — | 660,000 N | — | — |
| Basic static load rating, radialC0r | — | 148,381.295 lbf | — | — |
| Fatigue load limit, radialCur | — | 107,000 N | — | — |
| Fatigue load limit, radialCur | — | 24,055.755 lbf | — | — |
| Manufacturer Identity | ||||
| Schaeffler Product Code | — | 373104 | — | — |
| Material Number | — | — | 000000000190033586 | — |
| Official Class Key | — | — | — | 040-010-000 |
| Base Type | — | NJ422 | — | — |
| World Assembly Part Number | — | — | NJ422MA | — |
| Gpsd Group | — | F01 | — | — |
| Inner Ring Part Number | — | — | 110ARJA04 | — |
| Product Line Id | — | 63 | — | — |
| Outer Ring Part Number | — | — | 110ERUA04 | — |
| Drawing Number | — | — | M947227 | — |
| Upc | — | — | 0013992686176 | — |
| Official Source System | — | — | CORE BP - DS DF | — |
| Official Last Run | — | — | 2026-08-23T20:02:48.51 | — |
| SAP material number | — | 0192302810000 | — | — |
| Base product | — | 2305090111 | — | — |
| Bearing X designation | — | NJ422-XL-M1 | — | — |
| Mounting Manager ID | — | NJ422-XL-M1 | — | — |
| Grease application ID | — | NJ422-XL-M1 | — | — |
| Mounting dimensions | ||||
| Minimum diameter shaft shoulderda min | — | 130 mm | — | — |
| Minimum diameter shaft shoulderda min | — | 5.118 in | — | — |
| Maximum diameter of shaft shoulderda max | — | 153 mm | — | — |
| Maximum diameter of shaft shoulderda max | — | 6.024 in | — | — |
| Maximum diameter of housing shoulderDa max | — | 260 mm | — | — |
| Maximum diameter of housing shoulderDa max | — | 10.236 in | — | — |
| Minimum shaft shoulderdc min | — | 173 mm | — | — |
| Minimum shaft shoulderdc min | — | 6.811 in | — | — |
| Maximum recess radiusra max | — | 3 mm | — | — |
| Maximum recess radiusra max | — | 0.118 in | — | — |
| Product characteristics | ||||
| Design | — | Standard | — | — |
| Radial internal clearanceCN (Group N) | — | Normal internal clearance | — | — |
| Tolerance classPN | — | Normal (ISO 492:2023) | — | — |
| Number of rows1 | — | Single-row design | — | — |
| Product identity | ||||
| Official product category | Cylindrical roller bearings | — | — | — |
| Official taxonomy path | /products/rolling-bearings/roller-bearings/cylindrical-roller-bearings/single-row-cylindrical-roller-bearings | — | — | — |
| Structure group ID | BC1_001_101 | — | — | — |
| Available from SKF | Yes | — | — | — |
| Remanufacturable | No | — | — | — |
| Product Identity | ||||
| Construction | — | Cylindrical roller bearing NJ..-M1, with cage, single row, semi-locating bearing, 2 ribs on outer ring, 1 rib on inner ring, type NJ | Single Row Cylindrical Roller Bearing | Imperial Series | 4.3307 in Bore | 11.0236 in OD | 2.5591 in Width | Open | Cylindrical Bore | Machined Window Brass Cage | C0 Clearance | — |
| Short Description | — | Cylindrical roller bearing | — | — |
| Type Description | — | — | Cylindrical 1-Row | — |
| Number Of Rows | 1 | — | 1 | — |
| Tapered Bore | — | — | N | — |
| Properties | ||||
| Bearing part | Complete bearing | — | — | — |
| Axial displacement capability | In one direction | — | — | — |
| Locating feature, bearing outer ring | Without | — | — | — |
| Bore type | Cylindrical | — | — | — |
| Number of flanges, outer ring | 2 | — | — | — |
| Number of flanges, inner ring | 1 | — | — | — |
| Loose flange | None | — | — | — |
| Tolerance class | Normal | — | — | — |
| Coating | Without | — | — | — |
| Relubrication feature | Without | — | — | — |
| Indicative carbon footprint for new product | 74.0 kg CO 2 e | — | — | — |
| Technical Data | ||||
| d | — | — | — | 280 mm |
| B | — | — | — | 65 mm |
| Bore Diameter (D) | — | 110 mm | — | — |
| R(Min.) | — | — | — | 4 mm |
| Outside Diamater (D) | — | 280 mm | — | — |
| R1(Min.) | — | — | — | 4 mm |
| Total Width (B) | — | 65 mm | — | — |
| Overall Width | — | — | 0.000 mm | — |
| Fw | — | — | — | 155 mm |
| Basic Dynamic Load Rating, Radial (Cr) | — | 680,000 N | — | — |
| Radial Rating | — | — | 663,000 N | — |
| Ew | — | — | — | - mm |
| Basic Static Load Rating, Radial (C0R) | — | 660,000 N | — | — |
| Axial Rating | — | — | 0 N | — |
| Basic Load Ratings : Cr | — | — | — | 685 kN |
| Raceway Diameter Inner Ring (F) | — | 155 mm | — | — |
| Dynamic Rating C1 | — | — | 663,000 N | — |
| Basic Load Ratings : C0R | — | — | — | 621 kN |
| Operating Temperature Min. (Tmin) | — | -30 °C | — | — |
| Dynamic Rating C90 | — | — | 0 N | — |
| Fatigue Load Limit : Cu | — | — | — | 80.8 kN |
| Minimum Diameter Shaft Shoulder (Da) | — | 130 mm | — | — |
| Dynamic Axial Rating Ca90 | — | — | 0 N | — |
| Limiting Speeds(Grease Lub.) | — | — | — | 2200 min-1 |
| Operating Temperature Max. (Tmax) | — | 150 °C | — | — |
| Dynamic Axial Rating Ca1 | — | — | 0 N | — |
| Limiting Speeds(Oil Lub.) | — | — | — | 2900 min-1 |
| Limiting Speed (Limiting Spe) | — | 4,450 1/min | — | — |
| Static Radial Rating C0 | — | — | 689,000 N | — |
| Sd1 | — | — | — | - mm |
| Minimum Shaft Shoulder (Dc Min) | — | 173 mm | — | — |
| Extended Dynamic Rating Ce | — | — | 0 N | — |
| B1 | — | — | — | - mm |
| Reference Speed (Nϑr) | — | 2,550 1/min | — | — |
| Static Axial Rating C0A | — | — | 0 N | — |
| B2 | — | — | — | - mm |
| Maximum Recess Radius (Ra Max) | — | 3 mm | — | — |
| Da(Min.) | — | — | — | - mm |
| Maximum Diameter Of Housing Shoulder (Da) | — | 260 mm | — | — |
| Db(Min.) | — | — | — | - mm |
| Maximum Rib Diameter Inner Ring (D1) | — | 170.3 mm | — | — |
| Db(Max.) | — | — | — | - mm |
| Minimum Chamfer Dimension (R1 Min) | — | 4 mm | — | — |
| Dc(Min.) | — | — | — | - mm |
| Axial Displacement (S) | — | 6.2 mm | — | — |
| Dd(Min.) | — | — | — | - mm |
| Minimum Rib Diameter Outer Ring (D1 Min) | — | 220.9 mm | — | — |
| Da(Max.) | — | — | — | 264 mm |
| Maximum Diameter Of Shaft Shoulder (Da Max) | — | 153 mm | — | — |
| Minimum Chamfer Dimension (Rmin) | — | 4 mm | — | — |
| Raceway Diameter Outer Ring (E) | — | 235 mm | — | — |
| Ra(Max.) | — | — | — | 3 mm |
| Fatigue Load Limit, Radial (Cur) | — | 107,000 N | — | — |
| Rb(Max.) | — | — | — | 3 mm |
| Mass(Refer.) | — | — | — | 20.2 kg |
| Temperature range | ||||
| Operating temperature min.Tmin | — | -30 °C | — | — |
| Operating temperature min.Tmin | — | -22 °F | — | — |
| Operating temperature max.Tmax | — | 150 °C | — | — |
| Operating temperature max.Tmax | — | 302 °F | — | — |
Automatic matching is a search aid, not an interchangeability declaration. Confirm the full suffix, tolerances, internal design and application limits before substitution.