Choose the exact products yourself
CUSTOM / 08 MAX
Custom Comparison
Search a designation, choose up to eight exact suffix variants, and build your own side-by-side technical table.
Build your own set
Choose exact variants
For an automatic one-result-per-brand view, use Same-model Comparison. This page is for deliberate manual selection.
Auto-compare NJ422 by brand →Model matches
Select products
The first result per loaded brand is preselected. Choose up to eight exact variants and update the table.
Technical comparison
4 products side by side
A dash means that the loaded manufacturer source did not provide that field. It does not mean the feature is absent.
| Parameter | SKFNJ 422110 × 280 × 65 mm | FAGNJ422-XL-M1110 × 280 × 65 mm | TIMKENNJ422MA110 × 280 × 65 mm | KOYONJ422110 × 280 × 65 mm |
|---|---|---|---|---|
| Comparable specifications | ||||
| Brand | SKF | FAG | TIMKEN | KOYO |
| Designation | NJ 422 | NJ422-XL-M1 | NJ422MA | NJ422 |
| Product family | Cylindrical roller bearings | — | Cylindrical 1-Row | Single-row / NJ |
| Detailed type | Single row cylindrical roller bearing, nj design | Cylindrical roller bearings | Cylindrical roller bearings | Cylindrical roller bearings |
| Series | — | NJ422 | NCS-329964 | — |
| Bore diameterd | 110 mm | 110 mm | 110 mm | 110 mm |
| Outside diameterD | 280 mm | 280 mm | 280 mm | 280 mm |
| WidthB | 65 mm | 65 mm | 65 mm | 65 mm |
| Basic dynamic load ratingC | 523 kN | 680 kN | 663 kN | 685 kN |
| Basic static load ratingC0 | 585 kN | 660 kN | 689 kN | 621 kN |
| Fatigue load limitPu | 64 kN | 107 kN | — | 80.8 kN |
| Reference speednref | 2600 r/min | 2550 r/min | — | — |
| Limiting speednG | 3200 r/min | 4450 r/min | — | 2200 r/min |
| Mass≈m | 20 kg | 22.789 kg | 22.5 kg | 20.2 kg |
| Precision class | — | PN — Normal (ISO 492:2023) | — | — |
| Internal clearance | — | CN (Group N) — Normal internal clearance | — | — |
| Sealing | Without | — | Open | — |
| Cage | Sheet metal | M1 — Two Piece Brass Cage Roller Guided | Window Brass cage | — |
| Lubricant | None | — | — | — |
| Minimum operating temperatureTmin | — | -30 °C | — | — |
| Maximum operating temperatureTmax | — | 150 °C | — | — |
| Additional information | ||||
| L-washer | — | HJ422 | — | — |
| Calculation Factors | ||||
| K Factor | — | — | 0.00 | — |
| Y1 Factor | — | — | 0.00 | — |
| Y2 Factor | — | — | 0.00 | — |
| Y0 Factor | — | — | 0.00 | — |
| E Factor | — | — | 0.00 | — |
| Cg Factor | — | — | 0.1209 | — |
| Capabilities & suitability | ||||
| Radial load capacity | — | Yes | — | — |
| Axial load capacity in one direction | — | Yes | — | — |
| Suitable for grease lubrication | — | Yes | — | — |
| Suitable for oil lubrication | — | Yes | — | — |
| Unsealed design | — | Yes | — | — |
| Classification | ||||
| Official Category Path | — | — | — | Cylindrical roller bearings - Single-row - NJ |
| Official Classification 1 | — | — | — | Cylindrical roller bearings / Single-row / NJ |
| Dimensions | ||||
| Minimum chamfer dimensionrmin | — | 4 mm | — | — |
| Minimum chamfer dimensionrmin | — | 0.157 in | — | — |
| Minimum chamfer dimensionr1 min | — | 4 mm | — | — |
| Minimum chamfer dimensionr1 min | — | 0.157 in | — | — |
| Axial displacements | — | 6.2 mm | — | — |
| Axial displacements | — | 0.244 in | — | — |
| Raceway diameter outer ringE | — | 235 mm | — | — |
| Raceway diameter outer ringE | — | 9.252 in | — | — |
| Raceway diameter inner ringF | — | 155 mm | — | — |
| Raceway diameter inner ringF | — | 6.102 in | — | — |
| Minimum rib diameter outer ringD1 min | — | 220.9 mm | — | — |
| Minimum rib diameter outer ringD1 min | — | 8.697 in | — | — |
| Maximum rib diameter inner ringd1 | — | 170.3 mm | — | — |
| Maximum rib diameter inner ringd1 | — | 6.705 in | — | — |
| Engineering — Abutment dimensions | ||||
| Diameter of spacer sleeved a | max. 151 mm | — | — | — |
| Diameter of shaft abutmentd b | min. 175 mm | — | — | — |
| Diameter of housing abutmentD a | max. 260 mm | — | — | — |
| Radius of filletr a | max. 3 mm | — | — | — |
| Engineering — Associated products | ||||
| Angle ring | HJ 422 | — | — | — |
| Engineering — Calculation data | ||||
| Minimum load factork r | 0.15 | — | — | — |
| Limiting valuee | 0.2 | — | — | — |
| Calculation factorY | 0.6 | — | — | — |
| Engineering — Dimensions | ||||
| Shoulder diameter of inner ringd 1 | ≈ 171 mm | — | — | — |
| Shoulder diameter of outer ringD 1 | ≈ 219.65 mm | — | — | — |
| Raceway diameter of inner ringF | 155 mm | — | — | — |
| Chamfer dimensionr 1,2 | min. 4 mm | — | — | — |
| Chamfer dimensionr 3,4 | min. 4 mm | — | — | — |
| Permissible axial displacements | max. 4.8 mm | — | — | — |
| Logistics | ||||
| Product net weight | 20.0 kg | — | — | — |
| eClass code | 23-05-09-01 | — | — | — |
| UNSPSC code | 31171505 | — | — | — |
| Main Dimensions & Performance Data | ||||
| Basic dynamic load rating, radialCr | — | 680,000 N | — | — |
| Basic dynamic load rating, radialCr | — | 152,877.698 lbf | — | — |
| Basic static load rating, radialC0r | — | 660,000 N | — | — |
| Basic static load rating, radialC0r | — | 148,381.295 lbf | — | — |
| Fatigue load limit, radialCur | — | 107,000 N | — | — |
| Fatigue load limit, radialCur | — | 24,055.755 lbf | — | — |
| Manufacturer Identity | ||||
| Schaeffler Product Code | — | 373104 | — | — |
| Material Number | — | — | 000000000190033586 | — |
| Official Class Key | — | — | — | 040-010-000 |
| Base Type | — | NJ422 | — | — |
| World Assembly Part Number | — | — | NJ422MA | — |
| Gpsd Group | — | F01 | — | — |
| Inner Ring Part Number | — | — | 110ARJA04 | — |
| Product Line Id | — | 63 | — | — |
| Outer Ring Part Number | — | — | 110ERUA04 | — |
| Drawing Number | — | — | M947227 | — |
| Upc | — | — | 0013992686176 | — |
| Official Source System | — | — | CORE BP - DS DF | — |
| Official Last Run | — | — | 2026-08-23T20:02:48.51 | — |
| SAP material number | — | 0192302810000 | — | — |
| Base product | — | 2305090111 | — | — |
| Bearing X designation | — | NJ422-XL-M1 | — | — |
| Mounting Manager ID | — | NJ422-XL-M1 | — | — |
| Grease application ID | — | NJ422-XL-M1 | — | — |
| Mounting dimensions | ||||
| Minimum diameter shaft shoulderda min | — | 130 mm | — | — |
| Minimum diameter shaft shoulderda min | — | 5.118 in | — | — |
| Maximum diameter of shaft shoulderda max | — | 153 mm | — | — |
| Maximum diameter of shaft shoulderda max | — | 6.024 in | — | — |
| Maximum diameter of housing shoulderDa max | — | 260 mm | — | — |
| Maximum diameter of housing shoulderDa max | — | 10.236 in | — | — |
| Minimum shaft shoulderdc min | — | 173 mm | — | — |
| Minimum shaft shoulderdc min | — | 6.811 in | — | — |
| Maximum recess radiusra max | — | 3 mm | — | — |
| Maximum recess radiusra max | — | 0.118 in | — | — |
| Product characteristics | ||||
| Design | — | Standard | — | — |
| Radial internal clearanceCN (Group N) | — | Normal internal clearance | — | — |
| Tolerance classPN | — | Normal (ISO 492:2023) | — | — |
| Number of rows1 | — | Single-row design | — | — |
| Product identity | ||||
| Official product category | Cylindrical roller bearings | — | — | — |
| Official taxonomy path | /products/rolling-bearings/roller-bearings/cylindrical-roller-bearings/single-row-cylindrical-roller-bearings | — | — | — |
| Structure group ID | BC1_001_101 | — | — | — |
| Available from SKF | Yes | — | — | — |
| Remanufacturable | No | — | — | — |
| Product Identity | ||||
| Construction | — | Cylindrical roller bearing NJ..-M1, with cage, single row, semi-locating bearing, 2 ribs on outer ring, 1 rib on inner ring, type NJ | Single Row Cylindrical Roller Bearing | Imperial Series | 4.3307 in Bore | 11.0236 in OD | 2.5591 in Width | Open | Cylindrical Bore | Machined Window Brass Cage | C0 Clearance | — |
| Short Description | — | Cylindrical roller bearing | — | — |
| Type Description | — | — | Cylindrical 1-Row | — |
| Number Of Rows | 1 | — | 1 | — |
| Tapered Bore | — | — | N | — |
| Properties | ||||
| Bearing part | Complete bearing | — | — | — |
| Axial displacement capability | In one direction | — | — | — |
| Locating feature, bearing outer ring | Without | — | — | — |
| Bore type | Cylindrical | — | — | — |
| Number of flanges, outer ring | 2 | — | — | — |
| Number of flanges, inner ring | 1 | — | — | — |
| Loose flange | None | — | — | — |
| Tolerance class | Normal | — | — | — |
| Coating | Without | — | — | — |
| Relubrication feature | Without | — | — | — |
| Indicative carbon footprint for new product | 74.0 kg CO 2 e | — | — | — |
| Technical Data | ||||
| d | — | — | — | 280 mm |
| B | — | — | — | 65 mm |
| Bore Diameter (D) | — | 110 mm | — | — |
| R(Min.) | — | — | — | 4 mm |
| Outside Diamater (D) | — | 280 mm | — | — |
| R1(Min.) | — | — | — | 4 mm |
| Total Width (B) | — | 65 mm | — | — |
| Overall Width | — | — | 0.000 mm | — |
| Fw | — | — | — | 155 mm |
| Basic Dynamic Load Rating, Radial (Cr) | — | 680,000 N | — | — |
| Radial Rating | — | — | 663,000 N | — |
| Ew | — | — | — | - mm |
| Basic Static Load Rating, Radial (C0R) | — | 660,000 N | — | — |
| Axial Rating | — | — | 0 N | — |
| Basic Load Ratings : Cr | — | — | — | 685 kN |
| Raceway Diameter Inner Ring (F) | — | 155 mm | — | — |
| Dynamic Rating C1 | — | — | 663,000 N | — |
| Basic Load Ratings : C0R | — | — | — | 621 kN |
| Operating Temperature Min. (Tmin) | — | -30 °C | — | — |
| Dynamic Rating C90 | — | — | 0 N | — |
| Fatigue Load Limit : Cu | — | — | — | 80.8 kN |
| Minimum Diameter Shaft Shoulder (Da) | — | 130 mm | — | — |
| Dynamic Axial Rating Ca90 | — | — | 0 N | — |
| Limiting Speeds(Grease Lub.) | — | — | — | 2200 min-1 |
| Operating Temperature Max. (Tmax) | — | 150 °C | — | — |
| Dynamic Axial Rating Ca1 | — | — | 0 N | — |
| Limiting Speeds(Oil Lub.) | — | — | — | 2900 min-1 |
| Limiting Speed (Limiting Spe) | — | 4,450 1/min | — | — |
| Static Radial Rating C0 | — | — | 689,000 N | — |
| Sd1 | — | — | — | - mm |
| Minimum Shaft Shoulder (Dc Min) | — | 173 mm | — | — |
| Extended Dynamic Rating Ce | — | — | 0 N | — |
| B1 | — | — | — | - mm |
| Reference Speed (Nϑr) | — | 2,550 1/min | — | — |
| Static Axial Rating C0A | — | — | 0 N | — |
| B2 | — | — | — | - mm |
| Maximum Recess Radius (Ra Max) | — | 3 mm | — | — |
| Da(Min.) | — | — | — | - mm |
| Maximum Diameter Of Housing Shoulder (Da) | — | 260 mm | — | — |
| Db(Min.) | — | — | — | - mm |
| Maximum Rib Diameter Inner Ring (D1) | — | 170.3 mm | — | — |
| Db(Max.) | — | — | — | - mm |
| Minimum Chamfer Dimension (R1 Min) | — | 4 mm | — | — |
| Dc(Min.) | — | — | — | - mm |
| Axial Displacement (S) | — | 6.2 mm | — | — |
| Dd(Min.) | — | — | — | - mm |
| Minimum Rib Diameter Outer Ring (D1 Min) | — | 220.9 mm | — | — |
| Da(Max.) | — | — | — | 264 mm |
| Maximum Diameter Of Shaft Shoulder (Da Max) | — | 153 mm | — | — |
| Minimum Chamfer Dimension (Rmin) | — | 4 mm | — | — |
| Raceway Diameter Outer Ring (E) | — | 235 mm | — | — |
| Ra(Max.) | — | — | — | 3 mm |
| Fatigue Load Limit, Radial (Cur) | — | 107,000 N | — | — |
| Rb(Max.) | — | — | — | 3 mm |
| Mass(Refer.) | — | — | — | 20.2 kg |
| Temperature range | ||||
| Operating temperature min.Tmin | — | -30 °C | — | — |
| Operating temperature min.Tmin | — | -22 °F | — | — |
| Operating temperature max.Tmax | — | 150 °C | — | — |
| Operating temperature max.Tmax | — | 302 °F | — | — |
Independent reference comparison based on the manufacturer data currently loaded. Always verify current limits, tolerances and suffix definitions with the official source before engineering selection.