Cross-brand designation analysis
COMPARE / VERIFY
Same-model Comparison
Explore products that share a base designation across loaded brands, with dimensional agreement and data gaps shown clearly.
Automatic candidate selection
One base designation across loaded brands
Exact designations rank first. Dimensions, suffixes and other technical differences remain visible so the result is not mistaken for an interchangeability declaration.
Dimensions verified
“N330” across 4 loaded brands
At least two brands share the same bore, outside diameter and width. Use Custom Compare when you want to choose exact suffix variants yourself.
Technical comparison
Choose exact variants instead →Brand differences at a glance
| Parameter | FAGN330-E-XL-M1150 × 320 × 65 mm | TIMKENN330EMB150 × 320 × 65 mm | NSKN330M150 × 320 × 65 mm | KOYON330150 × 320 × 65 mm |
|---|---|---|---|---|
| Comparable specifications | ||||
| Brand | FAG | TIMKEN | NSK | KOYO |
| Designation | N330-E-XL-M1 | N330EMB | N330M | N330 |
| Product family | — | Cylindrical 1-Row | Cylindrical roller bearing | Single-row / NU |
| Detailed type | Cylindrical roller bearings | Cylindrical roller bearings | Cylindrical roller bearings | Cylindrical roller bearings |
| Series | N330 | EX27723 | — | — |
| Bore diameterd | 150 mm | 150 mm | 150 mm | 150 mm |
| Outside diameterD | 320 mm | 320 mm | 320 mm | 320 mm |
| WidthB | 65 mm | 65 mm | 65 mm | 65 mm |
| Basic dynamic load ratingC | 900 kN | 870 kN | 815 kN | 829 kN |
| Basic static load ratingC0 | 930 kN | 951 kN | 805 kN | 807 kN |
| Fatigue load limitPu | 141 kN | — | — | 99.1 kN |
| Limiting speednG | — | — | — | 1800 r/min |
| Mass≈m | 26.4 kg | 26 kg | — | — |
| Precision class | PN — Normal (ISO 492:2023) | — | — | — |
| Internal clearance | CN (Group N) — Normal internal clearance | — | — | — |
| Sealing | — | Open | — | — |
| Cage | M1 — Two Piece Brass Cage Roller Guided | Window Brass cage | Machined brass | — |
| Minimum operating temperatureTmin | -30 °C | — | — | — |
| Maximum operating temperatureTmax | 150 °C | — | — | — |
| Boundary dimensions | ||||
| Bearing widthB | — | — | 65 mm | — |
| Minimum bearing chamferr min. | — | — | 4 mm | — |
| Minimum secondary bearing chamferr1 min. | — | — | 4 mm | — |
| Roller circumscribed circle diameterEw | — | — | 277 mm | — |
| Calculation Factors | ||||
| K Factor | — | 0.00 | — | — |
| Y1 Factor | — | 0.00 | — | — |
| Y2 Factor | — | 0.00 | — | — |
| Y0 Factor | — | 0.00 | — | — |
| E Factor | — | 0.00 | — | — |
| Cg Factor | — | 0.1180 | — | — |
| Capabilities & suitability | ||||
| Radial load capacity | Yes | — | — | — |
| Suitable for grease lubrication | Yes | — | — | — |
| Suitable for oil lubrication | Yes | — | — | — |
| Unsealed design | Yes | — | — | — |
| Largebearing | Yes | — | — | — |
| Catalogue reference mass | ||||
| Approximate shared-row mass — not separately stated for each rib arrangement | — | — | 25.8 kg | — |
| Classification | ||||
| Official Category Path | — | — | — | Cylindrical roller bearings - Single-row - NU |
| Official Classification 1 | — | — | — | Cylindrical roller bearings / Single-row / NU |
| Official Classification 2 | — | — | — | Cylindrical roller bearings / Single-row / N |
| Construction | ||||
| Single-row construction type | — | — | N | — |
| Rib arrangement | — | — | Two inner-ring ribs; ribless outer ring | — |
| Standard cage material | — | — | Machined brass | — |
| Standard cage marking | — | — | M | — |
| Other cage codes listed for this catalogue row | — | — | None listed in this row | — |
| Precision — designation omission rule | — | — | ISO Normal when no precision suffix is specified | — |
| Clearance identification — verify interchangeability | — | — | No clearance suffix shown. CN omission applies to interchangeable designs; do not infer a numerical clearance. | — |
| Optimized crowning note | — | — | No optimized-crowning asterisk on this row | — |
| Dimensions | ||||
| Minimum chamfer dimensionr1 min | 4 mm | — | — | — |
| Minimum chamfer dimensionr1 min | 0.157 in | — | — | — |
| Axial displacements1 | 5.5 mm | — | — | — |
| Axial displacements1 | 0.217 in | — | — | — |
| Raceway diameter outer ringE | 283 mm | — | — | — |
| Raceway diameter outer ringE | 11.142 in | — | — | — |
| Load ratings — standard cage | ||||
| Basic dynamic radial load ratingCr | — | — | 815000 N | — |
| Basic static radial load ratingC0r | — | — | 805000 N | — |
| Lubrication-qualified speed — standard cage | ||||
| Thermal speed rating — oil bath | — | — | 2200 r/min | — |
| Mechanical limiting speed — forced oil circulation | — | — | Not stated in this catalogue row | — |
| Limiting speed — grease | — | — | 1800 r/min | — |
| Limiting speed — oil bath | — | — | 2200 r/min | — |
| Main Dimensions & Performance Data | ||||
| Basic dynamic load rating, radialCr | 900,000 N | — | — | — |
| Basic dynamic load rating, radialCr | 202,338.129 lbf | — | — | — |
| Basic static load rating, radialC0r | 930,000 N | — | — | — |
| Basic static load rating, radialC0r | 209,082.734 lbf | — | — | — |
| Fatigue load limit, radialCur | 141,000 N | — | — | — |
| Fatigue load limit, radialCur | 31,699.64 lbf | — | — | — |
| Limiting speed for grease lubricationnG Grease | 3,100 1/min | — | — | — |
| Limiting speed for oil lubricationnG Oil | 3,650 1/min | — | — | — |
| Manufacturer Identity | ||||
| Schaeffler Product Code | 367759 | — | — | — |
| Material Number | — | 000000000190043238 | — | — |
| Official Class Key | — | — | — | 040-010-000 |
| Base Type | N330 | — | — | — |
| World Assembly Part Number | — | N330EMB | — | — |
| Gpsd Group | F01 | — | — | — |
| Inner Ring Part Number | — | 150ARNE03 | — | — |
| Product Line Id | 63 | — | — | — |
| Outer Ring Part Number | — | 150ERNE03 | — | — |
| Drawing Number | — | M952622 | — | — |
| Upc | — | 0013992676160 | — | — |
| Official Source System | — | CORE BP - DS DF | — | — |
| Official Last Run | — | 2026-08-23T20:02:46.143 | — | — |
| SAP material number | 0192189740000 | — | — | — |
| Base product | 2305090101 | — | — | — |
| Bearing X designation | N330-E-XL-M1 | — | — | — |
| Mounting Manager ID | N330-E-XL-M1 | — | — | — |
| Grease application ID | N330-E-XL-M1 | — | — | — |
| Mounting dimensions | ||||
| Diameter shaft shoulderda | 167 mm | — | — | — |
| Diameter shaft shoulderda | 6.575 in | — | — | — |
| Diameter of housing shoulderDa | 303 mm | — | — | — |
| Diameter of housing shoulderDa | 11.929 in | — | — | — |
| Maximum recess radiusra1 max | 3 mm | — | — | — |
| Maximum recess radiusra1 max | 0.118 in | — | — | — |
| Mounting dimensions — shown arrangement | ||||
| Minimum shaft shoulder diameterda min. | — | — | 166 mm | — |
| Maximum housing shoulder diameterDb max. | — | — | 304 mm | — |
| Minimum housing shoulder diameterDb min. | — | — | 283 mm | — |
| Maximum adjacent fillet radiusra max. | — | — | 3 mm | — |
| Maximum secondary adjacent fillet radiusrb max. | — | — | 3 mm | — |
| Product characteristics | ||||
| Tolerance classPN | Normal (ISO 492:2023) | — | — | — |
| Change markE | Increased Capacity Design | — | — | — |
| Radial internal clearanceCN (Group N) | Normal internal clearance | — | — | — |
| Number of rows1 | Single-row design | — | — | — |
| Product Identity | ||||
| Construction | Cylindrical roller bearing N3..-E-M1, with cage, single row, non-locating bearing, 0 ribs on outer ring, 2 rib on inner ring, type N3 | Single Row Cylindrical Roller Bearing | Imperial Series | 5.9055 in Bore | 12.5984 in OD | 2.5591 in Width | Open | Cylindrical Bore | Machined Window Brass Cage | C0 Clearance | — | — |
| Short Description | Cylindrical roller bearing | — | — | — |
| Type Description | — | Cylindrical 1-Row | — | — |
| Number Of Rows | — | 1 | — | — |
| Tapered Bore | — | N | — | — |
| Technical Data | ||||
| d | — | — | — | 320 mm |
| Bore Diameter (D) | 150 mm | — | — | — |
| B | — | — | — | 65 mm |
| Outside Diamater (D) | 320 mm | — | — | — |
| R(Min.) | — | — | — | 4 mm |
| Total Width (B) | 65 mm | — | — | — |
| Overall Width | — | 0.000 mm | — | — |
| R1(Min.) | — | — | — | 4 mm |
| Basic Dynamic Load Rating, Radial (Cr) | 900,000 N | — | — | — |
| Radial Rating | — | 870,000 N | — | — |
| Ew | — | — | — | - mm |
| Basic Static Load Rating, Radial (C0R) | 930,000 N | — | — | — |
| Axial Rating | — | 0 N | — | — |
| Basic Load Ratings : Cr | — | — | — | 829 kN |
| Operating Temperature Min. (Tmin) | -30 °C | — | — | — |
| Dynamic Rating C1 | — | 870,000 N | — | — |
| Basic Load Ratings : C0R | — | — | — | 807 kN |
| Limiting Speed For Grease Lubrication (Ng Grea) | 3,100 1/min | — | — | — |
| Dynamic Rating C90 | — | 0 N | — | — |
| Fatigue Load Limit : Cu | — | — | — | 99.1 kN |
| Minimum Diameter Shaft Shoulder (Da) | 167 mm | — | — | — |
| Dynamic Axial Rating Ca90 | — | 0 N | — | — |
| Limiting Speeds(Grease Lub.) | — | — | — | 1800 min-1 |
| Limiting Speed (Ng Oil) | 3,650 1/min | — | — | — |
| Dynamic Axial Rating Ca1 | — | 0 N | — | — |
| Limiting Speeds(Oil Lub.) | — | — | — | 2300 min-1 |
| Operating Temperature Max. (Tmax) | 150 °C | — | — | — |
| Static Radial Rating C0 | — | 951,000 N | — | — |
| Sd1 | — | — | — | - mm |
| Axial Displacement (S1) | 5.5 mm | — | — | — |
| Extended Dynamic Rating Ce | — | 0 N | — | — |
| B1 | — | — | — | - mm |
| Maximum Diameter Of Housing Shoulder (Da) | 303 mm | — | — | — |
| Static Axial Rating C0A | — | 0 N | — | — |
| B2 | — | — | — | - mm |
| Minimum Chamfer Dimension (R1 Min) | 4 mm | — | — | — |
| Da(Min.) | — | — | — | - mm |
| Maximum Recess Radius (Ra1 Max) | 3 mm | — | — | — |
| Dc(Min.) | — | — | — | - mm |
| Raceway Diameter Outer Ring (E) | 283 mm | — | — | — |
| Dd(Min.) | — | — | — | - mm |
| Fatigue Load Limit, Radial (Cur) | 141,000 N | — | — | — |
| Da(Max.) | — | — | — | 304 mm |
| Db(Max.) | — | — | — | - mm |
| Db(Min.) | — | — | — | - mm |
| Ra(Max.) | — | — | — | 3 mm |
| Rb(Max.) | — | — | — | 3 mm |
| Temperature range | ||||
| Operating temperature min.Tmin | -30 °C | — | — | — |
| Operating temperature min.Tmin | -22 °F | — | — | — |
| Operating temperature max.Tmax | 150 °C | — | — | — |
| Operating temperature max.Tmax | 302 °F | — | — | — |
Automatic matching is a search aid, not an interchangeability declaration. Confirm the full suffix, tolerances, internal design and application limits before substitution.