Choose the exact products yourself
CUSTOM / 08 MAX
Custom Comparison
Search a designation, choose up to eight exact suffix variants, and build your own side-by-side technical table.
Build your own set
Choose exact variants
For an automatic one-result-per-brand view, use Same-model Comparison. This page is for deliberate manual selection.
Auto-compare N330 by brand →Model matches
Select products
The first result per loaded brand is preselected. Choose up to eight exact variants and update the table.
Technical comparison
4 products side by side
A dash means that the loaded manufacturer source did not provide that field. It does not mean the feature is absent.
| Parameter | FAGN330-E-XL-M1150 × 320 × 65 mm | TIMKENN330EMB150 × 320 × 65 mm | NSKN330M150 × 320 × 65 mm | KOYON330150 × 320 × 65 mm |
|---|---|---|---|---|
| Comparable specifications | ||||
| Brand | FAG | TIMKEN | NSK | KOYO |
| Designation | N330-E-XL-M1 | N330EMB | N330M | N330 |
| Product family | — | Cylindrical 1-Row | Cylindrical roller bearing | Single-row / NU |
| Detailed type | Cylindrical roller bearings | Cylindrical roller bearings | Cylindrical roller bearings | Cylindrical roller bearings |
| Series | N330 | EX27723 | — | — |
| Bore diameterd | 150 mm | 150 mm | 150 mm | 150 mm |
| Outside diameterD | 320 mm | 320 mm | 320 mm | 320 mm |
| WidthB | 65 mm | 65 mm | 65 mm | 65 mm |
| Basic dynamic load ratingC | 900 kN | 870 kN | 815 kN | 829 kN |
| Basic static load ratingC0 | 930 kN | 951 kN | 805 kN | 807 kN |
| Fatigue load limitPu | 141 kN | — | — | 99.1 kN |
| Limiting speednG | — | — | — | 1800 r/min |
| Mass≈m | 26.4 kg | 26 kg | — | — |
| Precision class | PN — Normal (ISO 492:2023) | — | — | — |
| Internal clearance | CN (Group N) — Normal internal clearance | — | — | — |
| Sealing | — | Open | — | — |
| Cage | M1 — Two Piece Brass Cage Roller Guided | Window Brass cage | Machined brass | — |
| Minimum operating temperatureTmin | -30 °C | — | — | — |
| Maximum operating temperatureTmax | 150 °C | — | — | — |
| Boundary dimensions | ||||
| Bearing widthB | — | — | 65 mm | — |
| Minimum bearing chamferr min. | — | — | 4 mm | — |
| Minimum secondary bearing chamferr1 min. | — | — | 4 mm | — |
| Roller circumscribed circle diameterEw | — | — | 277 mm | — |
| Calculation Factors | ||||
| K Factor | — | 0.00 | — | — |
| Y1 Factor | — | 0.00 | — | — |
| Y2 Factor | — | 0.00 | — | — |
| Y0 Factor | — | 0.00 | — | — |
| E Factor | — | 0.00 | — | — |
| Cg Factor | — | 0.1180 | — | — |
| Capabilities & suitability | ||||
| Radial load capacity | Yes | — | — | — |
| Suitable for grease lubrication | Yes | — | — | — |
| Suitable for oil lubrication | Yes | — | — | — |
| Unsealed design | Yes | — | — | — |
| Largebearing | Yes | — | — | — |
| Catalogue reference mass | ||||
| Approximate shared-row mass — not separately stated for each rib arrangement | — | — | 25.8 kg | — |
| Classification | ||||
| Official Category Path | — | — | — | Cylindrical roller bearings - Single-row - NU |
| Official Classification 1 | — | — | — | Cylindrical roller bearings / Single-row / NU |
| Official Classification 2 | — | — | — | Cylindrical roller bearings / Single-row / N |
| Construction | ||||
| Single-row construction type | — | — | N | — |
| Rib arrangement | — | — | Two inner-ring ribs; ribless outer ring | — |
| Standard cage material | — | — | Machined brass | — |
| Standard cage marking | — | — | M | — |
| Other cage codes listed for this catalogue row | — | — | None listed in this row | — |
| Precision — designation omission rule | — | — | ISO Normal when no precision suffix is specified | — |
| Clearance identification — verify interchangeability | — | — | No clearance suffix shown. CN omission applies to interchangeable designs; do not infer a numerical clearance. | — |
| Optimized crowning note | — | — | No optimized-crowning asterisk on this row | — |
| Dimensions | ||||
| Minimum chamfer dimensionr1 min | 4 mm | — | — | — |
| Minimum chamfer dimensionr1 min | 0.157 in | — | — | — |
| Axial displacements1 | 5.5 mm | — | — | — |
| Axial displacements1 | 0.217 in | — | — | — |
| Raceway diameter outer ringE | 283 mm | — | — | — |
| Raceway diameter outer ringE | 11.142 in | — | — | — |
| Load ratings — standard cage | ||||
| Basic dynamic radial load ratingCr | — | — | 815000 N | — |
| Basic static radial load ratingC0r | — | — | 805000 N | — |
| Lubrication-qualified speed — standard cage | ||||
| Thermal speed rating — oil bath | — | — | 2200 r/min | — |
| Mechanical limiting speed — forced oil circulation | — | — | Not stated in this catalogue row | — |
| Limiting speed — grease | — | — | 1800 r/min | — |
| Limiting speed — oil bath | — | — | 2200 r/min | — |
| Main Dimensions & Performance Data | ||||
| Basic dynamic load rating, radialCr | 900,000 N | — | — | — |
| Basic dynamic load rating, radialCr | 202,338.129 lbf | — | — | — |
| Basic static load rating, radialC0r | 930,000 N | — | — | — |
| Basic static load rating, radialC0r | 209,082.734 lbf | — | — | — |
| Fatigue load limit, radialCur | 141,000 N | — | — | — |
| Fatigue load limit, radialCur | 31,699.64 lbf | — | — | — |
| Limiting speed for grease lubricationnG Grease | 3,100 1/min | — | — | — |
| Limiting speed for oil lubricationnG Oil | 3,650 1/min | — | — | — |
| Manufacturer Identity | ||||
| Schaeffler Product Code | 367759 | — | — | — |
| Material Number | — | 000000000190043238 | — | — |
| Official Class Key | — | — | — | 040-010-000 |
| Base Type | N330 | — | — | — |
| World Assembly Part Number | — | N330EMB | — | — |
| Gpsd Group | F01 | — | — | — |
| Inner Ring Part Number | — | 150ARNE03 | — | — |
| Product Line Id | 63 | — | — | — |
| Outer Ring Part Number | — | 150ERNE03 | — | — |
| Drawing Number | — | M952622 | — | — |
| Upc | — | 0013992676160 | — | — |
| Official Source System | — | CORE BP - DS DF | — | — |
| Official Last Run | — | 2026-08-23T20:02:46.143 | — | — |
| SAP material number | 0192189740000 | — | — | — |
| Base product | 2305090101 | — | — | — |
| Bearing X designation | N330-E-XL-M1 | — | — | — |
| Mounting Manager ID | N330-E-XL-M1 | — | — | — |
| Grease application ID | N330-E-XL-M1 | — | — | — |
| Mounting dimensions | ||||
| Diameter shaft shoulderda | 167 mm | — | — | — |
| Diameter shaft shoulderda | 6.575 in | — | — | — |
| Diameter of housing shoulderDa | 303 mm | — | — | — |
| Diameter of housing shoulderDa | 11.929 in | — | — | — |
| Maximum recess radiusra1 max | 3 mm | — | — | — |
| Maximum recess radiusra1 max | 0.118 in | — | — | — |
| Mounting dimensions — shown arrangement | ||||
| Minimum shaft shoulder diameterda min. | — | — | 166 mm | — |
| Maximum housing shoulder diameterDb max. | — | — | 304 mm | — |
| Minimum housing shoulder diameterDb min. | — | — | 283 mm | — |
| Maximum adjacent fillet radiusra max. | — | — | 3 mm | — |
| Maximum secondary adjacent fillet radiusrb max. | — | — | 3 mm | — |
| Product characteristics | ||||
| Tolerance classPN | Normal (ISO 492:2023) | — | — | — |
| Change markE | Increased Capacity Design | — | — | — |
| Radial internal clearanceCN (Group N) | Normal internal clearance | — | — | — |
| Number of rows1 | Single-row design | — | — | — |
| Product Identity | ||||
| Construction | Cylindrical roller bearing N3..-E-M1, with cage, single row, non-locating bearing, 0 ribs on outer ring, 2 rib on inner ring, type N3 | Single Row Cylindrical Roller Bearing | Imperial Series | 5.9055 in Bore | 12.5984 in OD | 2.5591 in Width | Open | Cylindrical Bore | Machined Window Brass Cage | C0 Clearance | — | — |
| Short Description | Cylindrical roller bearing | — | — | — |
| Type Description | — | Cylindrical 1-Row | — | — |
| Number Of Rows | — | 1 | — | — |
| Tapered Bore | — | N | — | — |
| Technical Data | ||||
| d | — | — | — | 320 mm |
| Bore Diameter (D) | 150 mm | — | — | — |
| B | — | — | — | 65 mm |
| Outside Diamater (D) | 320 mm | — | — | — |
| R(Min.) | — | — | — | 4 mm |
| Total Width (B) | 65 mm | — | — | — |
| Overall Width | — | 0.000 mm | — | — |
| R1(Min.) | — | — | — | 4 mm |
| Basic Dynamic Load Rating, Radial (Cr) | 900,000 N | — | — | — |
| Radial Rating | — | 870,000 N | — | — |
| Ew | — | — | — | - mm |
| Basic Static Load Rating, Radial (C0R) | 930,000 N | — | — | — |
| Axial Rating | — | 0 N | — | — |
| Basic Load Ratings : Cr | — | — | — | 829 kN |
| Operating Temperature Min. (Tmin) | -30 °C | — | — | — |
| Dynamic Rating C1 | — | 870,000 N | — | — |
| Basic Load Ratings : C0R | — | — | — | 807 kN |
| Limiting Speed For Grease Lubrication (Ng Grea) | 3,100 1/min | — | — | — |
| Dynamic Rating C90 | — | 0 N | — | — |
| Fatigue Load Limit : Cu | — | — | — | 99.1 kN |
| Minimum Diameter Shaft Shoulder (Da) | 167 mm | — | — | — |
| Dynamic Axial Rating Ca90 | — | 0 N | — | — |
| Limiting Speeds(Grease Lub.) | — | — | — | 1800 min-1 |
| Limiting Speed (Ng Oil) | 3,650 1/min | — | — | — |
| Dynamic Axial Rating Ca1 | — | 0 N | — | — |
| Limiting Speeds(Oil Lub.) | — | — | — | 2300 min-1 |
| Operating Temperature Max. (Tmax) | 150 °C | — | — | — |
| Static Radial Rating C0 | — | 951,000 N | — | — |
| Sd1 | — | — | — | - mm |
| Axial Displacement (S1) | 5.5 mm | — | — | — |
| Extended Dynamic Rating Ce | — | 0 N | — | — |
| B1 | — | — | — | - mm |
| Maximum Diameter Of Housing Shoulder (Da) | 303 mm | — | — | — |
| Static Axial Rating C0A | — | 0 N | — | — |
| B2 | — | — | — | - mm |
| Minimum Chamfer Dimension (R1 Min) | 4 mm | — | — | — |
| Da(Min.) | — | — | — | - mm |
| Maximum Recess Radius (Ra1 Max) | 3 mm | — | — | — |
| Dc(Min.) | — | — | — | - mm |
| Raceway Diameter Outer Ring (E) | 283 mm | — | — | — |
| Dd(Min.) | — | — | — | - mm |
| Fatigue Load Limit, Radial (Cur) | 141,000 N | — | — | — |
| Da(Max.) | — | — | — | 304 mm |
| Db(Max.) | — | — | — | - mm |
| Db(Min.) | — | — | — | - mm |
| Ra(Max.) | — | — | — | 3 mm |
| Rb(Max.) | — | — | — | 3 mm |
| Temperature range | ||||
| Operating temperature min.Tmin | -30 °C | — | — | — |
| Operating temperature min.Tmin | -22 °F | — | — | — |
| Operating temperature max.Tmax | 150 °C | — | — | — |
| Operating temperature max.Tmax | 302 °F | — | — | — |
Independent reference comparison based on the manufacturer data currently loaded. Always verify current limits, tolerances and suffix definitions with the official source before engineering selection.