Cross-brand designation analysis
COMPARE / VERIFY
Same-model Comparison
Explore products that share a base designation across loaded brands, with dimensional agreement and data gaps shown clearly.
Cross Reference centre · Interchange verification checklist · Understand suffix differences
You entered K594-A-592-A-XL-B-W215FD. This table explores the base group K594; it does not preserve or approve every requested suffix. Search your complete marking first →
Automatic candidate selection
One base designation across loaded brands
Exact designations rank first. Dimensions, suffixes and other technical differences remain visible so the result is not mistaken for an interchangeability declaration.
Dimensions differ
“K594” across 2 loaded brands
The base designation is shared, but the loaded boundary dimensions do not agree. Use Custom Compare when you want to choose exact suffix variants yourself.
Technical comparison
Choose exact variants instead →Brand differences at a glance
| Parameter | FAGK59495.25 × × mm | TIMKENK594A / K592A95.25 × 152.4 × 39.687 mm |
|---|---|---|
| Comparable specifications | ||
| Brand | FAG | TIMKEN |
| Designation | K594 | K594A / K592A |
| Product family | — | TS - Tapered Single |
| Detailed type | Tapered roller bearings | Tapered roller bearings |
| Series | — | 595 |
| Bore diameterd | 95.25 mm | 95.25 mm |
| Outside diameterD | — | 152.4 mm |
| WidthB | — | 39.687 mm |
| Basic dynamic load ratingC | 182 kN | 234 kN |
| Basic static load ratingC0 | 285 kN | 319 kN |
| Fatigue load limitPu | 34.5 kN | — |
| Reference speednref | 3300 r/min | — |
| Limiting speednG | 4600 r/min | — |
| Mass≈m | 1.52 kg | 2.45 kg |
| Precision class | ABMA4 — Class 4 (ANSI/ABMA 19.2:2013) | — |
| Cage | Standard — Sheet steel cage, window cage, roller-guided | — |
| Minimum operating temperatureTmin | -30 °C | — |
| Maximum operating temperatureTmax | 120 °C | — |
| Calculation Factors | ||
| K Factor | — | 1.32 |
| Y1 Factor | — | 1.36 |
| Y2 Factor | — | -1.00 |
| Y0 Factor | — | 0.75 |
| E Factor | — | 0.44 |
| Cg Factor | — | 0.1277 |
| Calculation factors | ||
| Limiting value of Fa/Fr for the applicability of diff. Values of factors X and Ye | 0.44 | — |
| Dynamic axial load factorY | 1.36 | — |
| Static axial load factorY0 | 0.75 | — |
| Capabilities & suitability | ||
| Radial load capacity | Yes | — |
| Axial load capacity in one direction | Yes | — |
| Suitable for grease lubrication | Yes | — |
| Suitable for oil lubrication | Yes | — |
| Unsealed design | Yes | — |
| Dimensions | ||
| Minimum chamfer dimension of inner ring back facer1, 2 min | 3.6 mm | — |
| Minimum chamfer dimension of inner ring back facer1, 2 min | 0.142 in | — |
| Distance between the apexes of the pressure conesa | 34 mm | — |
| Distance between the apexes of the pressure conesa | 1.339 in | — |
| Guidance rib diameter of inner ringd1 | 122.7 mm | — |
| Guidance rib diameter of inner ringd1 | 4.831 in | — |
| Outer envelope circleEw | 146.605 mm | — |
| Outer envelope circleEw | 5.772 in | — |
| Contact angleα | 16.417 ° | — |
| Main Dimensions & Performance Data | ||
| Width, inner ringB | 36.322 mm | — |
| Width, inner ringB | 1.43 in | — |
| Basic dynamic load rating, radialCr | 182,000 N | — |
| Basic dynamic load rating, radialCr | 40,917.266 lbf | — |
| Basic static load rating, radialC0r | 285,000 N | — |
| Basic static load rating, radialC0r | 64,073.741 lbf | — |
| Fatigue load limit, radialCur | 34,500 N | — |
| Fatigue load limit, radialCur | 7,756.295 lbf | — |
| Thermal speed ratingnϑr | 3,300 1/min | — |
| Manufacturer Identity | ||
| Schaeffler Product Code | 2481392 | — |
| Material Number | — | 190000392190000325 |
| Base Type | K594 | — |
| World Assembly Part Number | — | K594A / K592A |
| Product Line Id | 64 | — |
| Inner Ring Part Number | — | K594A |
| Outer Ring Part Number | — | K592A |
| Official Source System | — | TS_PREPAIR |
| Official Last Run | — | 2026-08-23T00:00:00 |
| Base product | 2305091003 | — |
| Mounting Manager ID | K594 | — |
| Mounting dimensions | ||
| Maximum diameter of shaft shoulderda max | 104 mm | — |
| Maximum diameter of shaft shoulderda max | 4.094 in | — |
| Minimum diameter of shaft shoulderdb min | 110 mm | — |
| Minimum diameter of shaft shoulderdb min | 4.331 in | — |
| Minimum axial spaceCRa min | 6.4 mm | — |
| Minimum axial spaceCRa min | 0.252 in | — |
| Maximum axial spaceCRb max | 0.5 mm | — |
| Maximum axial spaceCRb max | 0.02 in | — |
| Maximum fillet radius of shaftra max | 3.6 mm | — |
| Maximum fillet radius of shaftra max | 0.142 in | — |
| Product characteristics | ||
| Tolerance classABMA4 | Class 4 (ANSI/ABMA 19.2:2013) | — |
| Heat treatment | Standard | — |
| Quality level | Standard | — |
| Number of rows1 | Single-row design | — |
| Product Identity | ||
| Construction | Tapered roller bearings without outer ring (Cone) K-Series, in inch sizes | — |
| Short Description | Tapered roller bearing | — |
| Type Description | — | TS - Tapered Single |
| Number Of Rows | — | 1 |
| Tapered Bore | — | N |
| Technical Data | ||
| Bore Diameter (D) | 95.25 mm | — |
| Overall Width | — | 39.687 mm |
| Basic Dynamic Load Rating, Radial (Cr) | 182,000 N | — |
| Radial Rating | — | 60,700 N |
| Basic Static Load Rating, Radial (C0R) | 285,000 N | — |
| Axial Rating | — | 45,900 N |
| Operating Temperature Min. (Tmin) | -30 °C | — |
| Dynamic Rating C1 | — | 234,000 N |
| Limiting Speed (Ng) | 4,600 1/min | — |
| Dynamic Rating C90 | — | 60,700 N |
| Operating Temperature Max. (Tmax) | 120 °C | — |
| Dynamic Axial Rating Ca90 | — | 45,900 N |
| Reference Speed (Nϑr) | 3,300 1/min | — |
| Dynamic Axial Rating Ca1 | — | 177,000 N |
| Contact Angle (Α) | 16.417 ° | — |
| Static Radial Rating C0 | — | 319,000 N |
| Fatigue Load Limit, Radial (Cur) | 34,500 N | — |
| Extended Dynamic Rating Ce | — | 0 N |
| Limiting Value Of Fa/Fr For The Applicability Of Diff. Values Of Factors X And Y (E) | 0.44 | — |
| Static Axial Rating C0A | — | 410,000 N |
| Maximum Diameter Of Shaft Shoulder (Da Max) | 104 mm | — |
| Minimum Diameter Of Shaft Shoulder (Db Min) | 110 mm | — |
| Dynamic Axial Load Factor (Y) | 1.36 | — |
| Maximum Fillet Radius (Ra Max) | 3.6 mm | — |
| Maximum Axial Space (Crb Max) | 0.5 mm | — |
| Minimum Chamfer Dimension Of Inner Ring Back Face (R1, 2 M) | 3.6 mm | — |
| Guidance Rib Diameter Of Inner Ring (D1) | 122.7 mm | — |
| Minimum Axial Space (Cra Min) | 6.4 mm | — |
| Width, Inner Ring (B) | 36.322 mm | — |
| Static Axial Load Factor (Y0) | 0.75 | — |
| Distance Between The Apexes Of The Pressure Cones (A) | 34 mm | — |
| Temperature range | ||
| Operating temperature min.Tmin | -30 °C | — |
| Operating temperature min.Tmin | -22 °F | — |
| Operating temperature max.Tmax | 120 °C | — |
| Operating temperature max.Tmax | 248 °F | — |
Automatic matching is a search aid, not an interchangeability declaration. Confirm the full suffix, tolerances, internal design and application limits before substitution.