Choose the exact products yourself
CUSTOM / 08 MAX
Custom Comparison
Search a designation, choose up to eight exact suffix variants, and build your own side-by-side technical table.
Build your own set
Choose exact variants
For an automatic one-result-per-brand view, use Same-model Comparison. This page is for deliberate manual selection.
Auto-compare K594 by brand →Model matches
Select products
The first result per loaded brand is preselected. Choose up to eight exact variants and update the table.
Technical comparison
2 products side by side
A dash means that the loaded manufacturer source did not provide that field. It does not mean the feature is absent.
| Parameter | FAGK59495.25 × × mm | TIMKENK594A / K592A95.25 × 152.4 × 39.687 mm |
|---|---|---|
| Comparable specifications | ||
| Brand | FAG | TIMKEN |
| Designation | K594 | K594A / K592A |
| Product family | — | TS - Tapered Single |
| Detailed type | Tapered roller bearings | Tapered roller bearings |
| Series | — | 595 |
| Bore diameterd | 95.25 mm | 95.25 mm |
| Outside diameterD | — | 152.4 mm |
| WidthB | — | 39.687 mm |
| Basic dynamic load ratingC | 182 kN | 234 kN |
| Basic static load ratingC0 | 285 kN | 319 kN |
| Fatigue load limitPu | 34.5 kN | — |
| Reference speednref | 3300 r/min | — |
| Limiting speednG | 4600 r/min | — |
| Mass≈m | 1.52 kg | 2.45 kg |
| Precision class | ABMA4 — Class 4 (ANSI/ABMA 19.2:2013) | — |
| Cage | Standard — Sheet steel cage, window cage, roller-guided | — |
| Minimum operating temperatureTmin | -30 °C | — |
| Maximum operating temperatureTmax | 120 °C | — |
| Calculation Factors | ||
| K Factor | — | 1.32 |
| Y1 Factor | — | 1.36 |
| Y2 Factor | — | -1.00 |
| Y0 Factor | — | 0.75 |
| E Factor | — | 0.44 |
| Cg Factor | — | 0.1277 |
| Calculation factors | ||
| Limiting value of Fa/Fr for the applicability of diff. Values of factors X and Ye | 0.44 | — |
| Dynamic axial load factorY | 1.36 | — |
| Static axial load factorY0 | 0.75 | — |
| Capabilities & suitability | ||
| Radial load capacity | Yes | — |
| Axial load capacity in one direction | Yes | — |
| Suitable for grease lubrication | Yes | — |
| Suitable for oil lubrication | Yes | — |
| Unsealed design | Yes | — |
| Dimensions | ||
| Minimum chamfer dimension of inner ring back facer1, 2 min | 3.6 mm | — |
| Minimum chamfer dimension of inner ring back facer1, 2 min | 0.142 in | — |
| Distance between the apexes of the pressure conesa | 34 mm | — |
| Distance between the apexes of the pressure conesa | 1.339 in | — |
| Guidance rib diameter of inner ringd1 | 122.7 mm | — |
| Guidance rib diameter of inner ringd1 | 4.831 in | — |
| Outer envelope circleEw | 146.605 mm | — |
| Outer envelope circleEw | 5.772 in | — |
| Contact angleα | 16.417 ° | — |
| Main Dimensions & Performance Data | ||
| Width, inner ringB | 36.322 mm | — |
| Width, inner ringB | 1.43 in | — |
| Basic dynamic load rating, radialCr | 182,000 N | — |
| Basic dynamic load rating, radialCr | 40,917.266 lbf | — |
| Basic static load rating, radialC0r | 285,000 N | — |
| Basic static load rating, radialC0r | 64,073.741 lbf | — |
| Fatigue load limit, radialCur | 34,500 N | — |
| Fatigue load limit, radialCur | 7,756.295 lbf | — |
| Thermal speed ratingnϑr | 3,300 1/min | — |
| Manufacturer Identity | ||
| Schaeffler Product Code | 2481392 | — |
| Material Number | — | 190000392190000325 |
| Base Type | K594 | — |
| World Assembly Part Number | — | K594A / K592A |
| Product Line Id | 64 | — |
| Inner Ring Part Number | — | K594A |
| Outer Ring Part Number | — | K592A |
| Official Source System | — | TS_PREPAIR |
| Official Last Run | — | 2026-08-23T00:00:00 |
| Base product | 2305091003 | — |
| Mounting Manager ID | K594 | — |
| Mounting dimensions | ||
| Maximum diameter of shaft shoulderda max | 104 mm | — |
| Maximum diameter of shaft shoulderda max | 4.094 in | — |
| Minimum diameter of shaft shoulderdb min | 110 mm | — |
| Minimum diameter of shaft shoulderdb min | 4.331 in | — |
| Minimum axial spaceCRa min | 6.4 mm | — |
| Minimum axial spaceCRa min | 0.252 in | — |
| Maximum axial spaceCRb max | 0.5 mm | — |
| Maximum axial spaceCRb max | 0.02 in | — |
| Maximum fillet radius of shaftra max | 3.6 mm | — |
| Maximum fillet radius of shaftra max | 0.142 in | — |
| Product characteristics | ||
| Tolerance classABMA4 | Class 4 (ANSI/ABMA 19.2:2013) | — |
| Heat treatment | Standard | — |
| Quality level | Standard | — |
| Number of rows1 | Single-row design | — |
| Product Identity | ||
| Construction | Tapered roller bearings without outer ring (Cone) K-Series, in inch sizes | — |
| Short Description | Tapered roller bearing | — |
| Type Description | — | TS - Tapered Single |
| Number Of Rows | — | 1 |
| Tapered Bore | — | N |
| Technical Data | ||
| Bore Diameter (D) | 95.25 mm | — |
| Overall Width | — | 39.687 mm |
| Basic Dynamic Load Rating, Radial (Cr) | 182,000 N | — |
| Radial Rating | — | 60,700 N |
| Basic Static Load Rating, Radial (C0R) | 285,000 N | — |
| Axial Rating | — | 45,900 N |
| Operating Temperature Min. (Tmin) | -30 °C | — |
| Dynamic Rating C1 | — | 234,000 N |
| Limiting Speed (Ng) | 4,600 1/min | — |
| Dynamic Rating C90 | — | 60,700 N |
| Operating Temperature Max. (Tmax) | 120 °C | — |
| Dynamic Axial Rating Ca90 | — | 45,900 N |
| Reference Speed (Nϑr) | 3,300 1/min | — |
| Dynamic Axial Rating Ca1 | — | 177,000 N |
| Contact Angle (Α) | 16.417 ° | — |
| Static Radial Rating C0 | — | 319,000 N |
| Fatigue Load Limit, Radial (Cur) | 34,500 N | — |
| Extended Dynamic Rating Ce | — | 0 N |
| Limiting Value Of Fa/Fr For The Applicability Of Diff. Values Of Factors X And Y (E) | 0.44 | — |
| Static Axial Rating C0A | — | 410,000 N |
| Maximum Diameter Of Shaft Shoulder (Da Max) | 104 mm | — |
| Minimum Diameter Of Shaft Shoulder (Db Min) | 110 mm | — |
| Dynamic Axial Load Factor (Y) | 1.36 | — |
| Maximum Fillet Radius (Ra Max) | 3.6 mm | — |
| Maximum Axial Space (Crb Max) | 0.5 mm | — |
| Minimum Chamfer Dimension Of Inner Ring Back Face (R1, 2 M) | 3.6 mm | — |
| Guidance Rib Diameter Of Inner Ring (D1) | 122.7 mm | — |
| Minimum Axial Space (Cra Min) | 6.4 mm | — |
| Width, Inner Ring (B) | 36.322 mm | — |
| Static Axial Load Factor (Y0) | 0.75 | — |
| Distance Between The Apexes Of The Pressure Cones (A) | 34 mm | — |
| Temperature range | ||
| Operating temperature min.Tmin | -30 °C | — |
| Operating temperature min.Tmin | -22 °F | — |
| Operating temperature max.Tmax | 120 °C | — |
| Operating temperature max.Tmax | 248 °F | — |
Independent reference comparison based on the manufacturer data currently loaded. Always verify current limits, tolerances and suffix definitions with the official source before engineering selection.