Cross-brand designation analysis
COMPARE / VERIFY
Same-model Comparison
Explore products that share a base designation across loaded brands, with dimensional agreement and data gaps shown clearly.
Automatic candidate selection
One base designation across loaded brands
Exact designations rank first. Dimensions, suffixes and other technical differences remain visible so the result is not mistaken for an interchangeability declaration.
Designation candidates
“HF1012” across 2 loaded brands
One highest-ranked designation candidate is shown per manufacturer. Use Custom Compare when you want to choose exact suffix variants yourself.
Technical comparison
Choose exact variants instead →Brand differences at a glance
| Parameter | INAHF101210 × 14 × 12 mm | NTNHF1012Needle roller bearings |
|---|---|---|
| Comparable specifications | ||
| Brand | INA | NTN |
| Designation | HF1012 | HF1012 |
| Product family | — | Drawn cup needle roller bearings, opened end |
| Detailed type | Drawn cup roller clutch | Needle roller bearings |
| Bore diameterd | 10 mm | — |
| Outside diameterD | 14 mm | 14 mm |
| WidthB | 12 mm | — |
| Mass≈m | 0.00418 kg | 0.004 kg |
| Minimum operating temperatureTmin | -10 °C | -20 °C |
| Maximum operating temperatureTmax | 70 °C | 120 °C |
| Dimensions and properties | ||
| Under rollers diameterFw | — | 10 mm |
| External diameterD | — | 14 mm |
| Width of bearing, drawn cup or outer ringC | — | 12 mm |
| Manufacturer Identity | ||
| Schaeffler Product Code | 407314 | — |
| Base Type | HF1012 | — |
| Gpsd Group | N08 | — |
| Product Line Id | 09 | — |
| X Life Marking | n.r. | — |
| Performance | ||
| Min operating temperatureTmin | — | -20 °C |
| Max operating temperatureTmax | — | 120 °C |
| Product Identity | ||
| Construction | Drawn cup roller clutches HF, with steel springs | — |
| Short Description | Drawn cup roller clutch | — |
| Technical Data | ||
| Under Roller Diameter (Fw) | 10 mm | — |
| Outside Diamater (D) | 14 mm | — |
| Width, Outer Ring (C) | 12 mm | — |
| Operating Temperature Min. (Tmin) | -10 °C | — |
| Operating Temperature Max. (Tmax) | 70 °C | — |
| Limiting Speed For Rotating Shaft (Ngw) | 14,000 1/min | — |
| Limiting Speed For Rotating Outer Ring (Nga) | 11,000 1/min | — |
| Minimum Chamfer Dimension (Rmin) | 0.3 mm | — |
| Permissible Torque (Md Per) | 5.3 Nm | — |
Automatic matching is a search aid, not an interchangeability declaration. Confirm the full suffix, tolerances, internal design and application limits before substitution.