Choose the exact products yourself
CUSTOM / 08 MAX
Custom Comparison
Search a designation, choose up to eight exact suffix variants, and build your own side-by-side technical table.
Build your own set
Choose exact variants
For an automatic one-result-per-brand view, use Same-model Comparison. This page is for deliberate manual selection.
Auto-compare HF1012 by brand →Model matches
Select products
The first result per loaded brand is preselected. Choose up to eight exact variants and update the table.
Technical comparison
2 products side by side
A dash means that the loaded manufacturer source did not provide that field. It does not mean the feature is absent.
| Parameter | INAHF101210 × 14 × 12 mm | NTNHF1012Needle roller bearings |
|---|---|---|
| Comparable specifications | ||
| Brand | INA | NTN |
| Designation | HF1012 | HF1012 |
| Product family | — | Drawn cup needle roller bearings, opened end |
| Detailed type | Drawn cup roller clutch | Needle roller bearings |
| Bore diameterd | 10 mm | — |
| Outside diameterD | 14 mm | 14 mm |
| WidthB | 12 mm | — |
| Mass≈m | 0.00418 kg | 0.004 kg |
| Minimum operating temperatureTmin | -10 °C | -20 °C |
| Maximum operating temperatureTmax | 70 °C | 120 °C |
| Dimensions and properties | ||
| Under rollers diameterFw | — | 10 mm |
| External diameterD | — | 14 mm |
| Width of bearing, drawn cup or outer ringC | — | 12 mm |
| Manufacturer Identity | ||
| Schaeffler Product Code | 407314 | — |
| Base Type | HF1012 | — |
| Gpsd Group | N08 | — |
| Product Line Id | 09 | — |
| X Life Marking | n.r. | — |
| Performance | ||
| Min operating temperatureTmin | — | -20 °C |
| Max operating temperatureTmax | — | 120 °C |
| Product Identity | ||
| Construction | Drawn cup roller clutches HF, with steel springs | — |
| Short Description | Drawn cup roller clutch | — |
| Technical Data | ||
| Under Roller Diameter (Fw) | 10 mm | — |
| Outside Diamater (D) | 14 mm | — |
| Width, Outer Ring (C) | 12 mm | — |
| Operating Temperature Min. (Tmin) | -10 °C | — |
| Operating Temperature Max. (Tmax) | 70 °C | — |
| Limiting Speed For Rotating Shaft (Ngw) | 14,000 1/min | — |
| Limiting Speed For Rotating Outer Ring (Nga) | 11,000 1/min | — |
| Minimum Chamfer Dimension (Rmin) | 0.3 mm | — |
| Permissible Torque (Md Per) | 5.3 Nm | — |
Independent reference comparison based on the manufacturer data currently loaded. Always verify current limits, tolerances and suffix definitions with the official source before engineering selection.