Cross-brand designation analysis
COMPARE / VERIFY
Same-model Comparison
Explore products that share a base designation across loaded brands, with dimensional agreement and data gaps shown clearly.
Automatic candidate selection
One base designation across loaded brands
Exact designations rank first. Dimensions, suffixes and other technical differences remain visible so the result is not mistaken for an interchangeability declaration.
Dimensions verified
“3319” across 3 loaded brands
At least two brands share the same bore, outside diameter and width. Use Custom Compare when you want to choose exact suffix variants yourself.
Technical comparison
Choose exact variants instead →Brand differences at a glance
| Parameter | SKF3319 A95 × 200 × 77.8 mm | FAG3319-BD-XL-2Z-TVH-L140-C395 × 200 × 77.8 mm | KOYO331995 × 200 × 77.8 mm |
|---|---|---|---|
| Comparable specifications | |||
| Brand | SKF | FAG | KOYO |
| Designation | 3319 A | 3319-BD-XL-2Z-TVH-L140-C3 | 3319 |
| Product family | Angular contact ball bearings | — | Double-row / Open |
| Detailed type | Double row angular contact ball bearing | Angular contact ball bearings | Angular contact ball bearings |
| Series | — | 3319 | — |
| Bore diameterd | 95 mm | 95 mm | 95 mm |
| Outside diameterD | 200 mm | 200 mm | 200 mm |
| WidthB | 77.8 mm | 77.8 mm | 77.8 mm |
| Basic dynamic load ratingC | 240 kN | 237 kN | 273 kN |
| Basic static load ratingC0 | 216 kN | 227 kN | 270 kN |
| Fatigue load limitPu | 7.5 kN | 13 kN | 14.9 kN |
| Reference speednref | 3600 r/min | 3700 r/min | — |
| Limiting speednG | 3200 r/min | 2550 r/min | 2000 r/min |
| Mass≈m | 9.66 kg | 9.98 kg | 10.9 kg |
| Precision class | — | P6 — Class 6 (ISO 492:2023) | — |
| Sealing | Without | 2Z — Non-contact shield on both sides | Open |
| Cage | Sheet metal | TVH — Solid cage made of glass-fiber reinforced polyamide PA66 | — |
| Bearing material | Bearing steel | — | — |
| Lubricant | None | L140 — Grease (L140/customer specific) | — |
| Minimum operating temperatureTmin | — | -30 °C | — |
| Maximum operating temperatureTmax | — | 120 °C | — |
| Capabilities & suitability | |||
| Radial load capacity | — | Yes | — |
| Axial load capacity in one direction | — | Yes | — |
| Axial load capacity in both directions | — | Yes | — |
| Lifetimelubricationfreedomfrommaintenance | — | Yes | — |
| Suitable for grease lubrication | — | Yes | — |
| Sealedonbothsides | — | Yes | — |
| Classification | |||
| Official Category Path | — | — | Angular contact ball bearings - Double-row - Open |
| Official Classification 1 | — | — | Angular contact ball bearings / Double-row / Open |
| Dimensions | |||
| Contact angle | 30.0 ° | — | — |
| Minimum chamfer dimensionrmin | — | 3 mm | — |
| Minimum chamfer dimensionrmin | — | 0.118 in | — |
| Shoulder diameter outer ringD1 | — | 170.94 mm | — |
| Shoulder diameter outer ringD1 | — | 6.73 in | — |
| Caliber diameter outer ringD2 | — | 175 mm | — |
| Caliber diameter outer ringD2 | — | 6.89 in | — |
| Shoulder diameter inner ringd1 | — | 135.88 mm | — |
| Shoulder diameter inner ringd1 | — | 5.35 in | — |
| Caliber diamter inner ringd2 | — | 133.61 mm | — |
| Caliber diamter inner ringd2 | — | 5.26 in | — |
| Distance between the apexes of the pressure conesa | — | 115.7 mm | — |
| Distance between the apexes of the pressure conesa | — | 4.555 in | — |
| Contact angleα | — | 30 ° | — |
| Engineering — Abutment dimensions | |||
| Abutment diameter shaftd a | min. 109 mm | — | — |
| Abutment diameter housingD a | max. 186 mm | — | — |
| Fillet radiusr a | max. 2.5 mm | — | — |
| Engineering — Calculation data | |||
| SKF performance class | SKF Explorer | — | — |
| Calculation factork r | 0.07 | — | — |
| Limiting valuee | 0.8 | — | — |
| Calculation factorX | 0.63 | — | — |
| Calculation factorY 0 | 0.66 | — | — |
| Calculation factorY 1 | 0.78 | — | — |
| Calculation factorY 2 | 1.2 | — | — |
| Engineering — Dimensions | |||
| Shoulder diameter inner ringd 1 | ≈ 127.07 mm | — | — |
| Shoulder diameter outer ringD 1 | ≈ 175.5 mm | — | — |
| Chamfer dimension inner ringr 1,2 | min. 3 mm | — | — |
| Distance pressure point(s)a | 118 mm | — | — |
| Logistics | |||
| Product net weight | 9.66 kg | — | — |
| eClass code | 23-05-08-03 | — | — |
| UNSPSC code | 31171531 | — | — |
| Main Dimensions & Performance Data | |||
| Basic dynamic load rating, radialCr | — | 237,000 N | — |
| Basic dynamic load rating, radialCr | — | 53,282.374 lbf | — |
| Basic static load rating, radialC0r | — | 227,000 N | — |
| Basic static load rating, radialC0r | — | 51,034.173 lbf | — |
| Fatigue load limit, radialCur | — | 13,000 N | — |
| Fatigue load limit, radialCur | — | 2,922.662 lbf | — |
| Manufacturer Identity | |||
| Schaeffler Product Code | — | 361250 | — |
| Official Class Key | — | — | 020-030-000 |
| Base Type | — | 3319 | — |
| Gpsd Group | — | S03 | — |
| Product Line Id | — | 14 | — |
| X Life Marking | — | XL | — |
| SAP material number | — | 0736942740030 | — |
| Base product | — | 2305080302 | — |
| Bearing X designation | — | 3319-BD-XL-2Z-TVH-L140-C3 | — |
| Mounting Manager ID | — | 3319-BD-XL-2Z-TVH-L140-C3 | — |
| Grease application ID | — | 3319-BD-XL-2Z-TVH-L140-C3 | — |
| Mounting dimensions | |||
| Minimum diameter shaft shoulderda min | — | 109 mm | — |
| Minimum diameter shaft shoulderda min | — | 4.291 in | — |
| Maximum diameter of housing shoulderDa max | — | 186 mm | — |
| Maximum diameter of housing shoulderDa max | — | 7.323 in | — |
| Maximum fillet radiusra max | — | 2.5 mm | — |
| Maximum fillet radiusra max | — | 0.098 in | — |
| Product characteristics | |||
| Design variantB | — | Bearing without filling slot | — |
| Changed internal design | — | D | — |
| Type of Seal2Z | — | Non-contact shield on both sides | — |
| Tolerance classP6 | — | Class 6 (ISO 492:2023) | — |
| Dimensional / heat stabilizationS0 | — | Rings dimensional stabilized up to 150° | — |
| Axial internal clearanceC3 | — | Group 3 (C3), bigger than CN | — |
| Product identity | |||
| Official product category | Angular contact ball bearings | — | — |
| Official taxonomy path | /products/rolling-bearings/ball-bearings/angular-contact-ball-bearings/double-row-angular-contact-ball-bearings | — | — |
| Structure group ID | BA2_001 | — | — |
| Available from SKF | Yes | — | — |
| Remanufacturable | No | — | — |
| Product Identity | |||
| Construction | — | Angular contact ball bearing 33..-BD-XL-2Z-TVH, double row, X-life, shields, plastic cage | — |
| Short Description | — | Angular contact ball bearing | — |
| Properties | |||
| Contact type | Normal contact (two-point contact) | — | — |
| Number of rows | 2 | — | — |
| Locating feature, bearing outer ring | Without | — | — |
| Ring type | One-piece inner and outer rings | — | — |
| Arrangement of contact angle (double-row bearing) | Back-to-back (O) | — | — |
| Matched arrangement | No | — | — |
| Universal matching bearing | No | — | — |
| Axial internal clearance | CN | — | — |
| Material, bearing | Bearing steel | — | — |
| Coating | Without | — | — |
| Relubrication feature | Without | — | — |
| Indicative carbon footprint for new product | 35.7 kg CO 2 e | — | — |
| Technical Data | |||
| d | — | — | 200 mm |
| B | — | — | 77.8 mm |
| R(Min.) | — | — | 3 mm |
| Bore Diameter (D) | — | 95 mm | — |
| Basic Load Ratings : Cr | — | — | 273 kN |
| Outside Diameter (D) | — | 200 mm | — |
| Basic Load Ratings : C0R | — | — | 270 kN |
| Width (B) | — | 77.8 mm | — |
| Fatigue Load Limit : Cu | — | — | 14.9 kN |
| Basic Dynamic Load Rating, Radial (Cr) | — | 237,000 N | — |
| Limiting Speeds(Grease Lub.) | — | — | 2000 min-1 |
| Basic Static Load Rating, Radial (C0R) | — | 227,000 N | — |
| Limiting Speeds(Oil Lub.) | — | — | 2600 min-1 |
| Operating Temperature Min. (Tmin) | — | -30 °C | — |
| Load Center Spread : A | — | — | 132.2 mm |
| Limiting Speed (Ng) | — | 2,550 1/min | — |
| Da(Min.) | — | — | 109 mm |
| Operating Temperature Max. (Tmax) | — | 120 °C | — |
| Da(Max.) | — | — | 186 mm |
| Reference Speed (Nϑr) | — | 3,700 1/min | — |
| Caliber Diameter Outer Ring (D2) | — | 175 mm | — |
| Ra(Max.) | — | — | 2.5 mm |
| Fatigue Load Limit, Radial (Cur) | — | 13,000 N | — |
| Mass(Refer.) | — | — | 10.9 kg |
| Minimum Diameter Shaft Shoulder (Da Min) | — | 109 mm | — |
| Shoulder Diameter Inner Ring (D1) | — | 135.88 mm | — |
| Maximum Diameter Of Housing Shoulder (Da Max) | — | 186 mm | — |
| Minimum Chamfer Dimension (Rmin) | — | 3 mm | — |
| Caliber Diameter Inner Ring (D1) | — | 133.61 mm | — |
| Maximum Fillet Radius (Ra Max) | — | 2.5 mm | — |
| Shoulder Diameter Outer Ring (D1) | — | 170.94 mm | — |
| Contact Angle (Α) | — | 30 ° | — |
| Distance Between The Apexes Of The Pressure Cones (A) | — | 115.7 mm | — |
| Temperature range | |||
| Operating temperature min.Tmin | — | -30 °C | — |
| Operating temperature min.Tmin | — | -22 °F | — |
| Operating temperature max.Tmax | — | 120 °C | — |
| Operating temperature max.Tmax | — | 248 °F | — |
Automatic matching is a search aid, not an interchangeability declaration. Confirm the full suffix, tolerances, internal design and application limits before substitution.