Choose the exact products yourself
CUSTOM / 08 MAX
Custom Comparison
Search a designation, choose up to eight exact suffix variants, and build your own side-by-side technical table.
Build your own set
Choose exact variants
For an automatic one-result-per-brand view, use Same-model Comparison. This page is for deliberate manual selection.
Auto-compare 3319 by brand →Model matches
Select products
The first result per loaded brand is preselected. Choose up to eight exact variants and update the table.
Technical comparison
3 products side by side
A dash means that the loaded manufacturer source did not provide that field. It does not mean the feature is absent.
| Parameter | SKF3319 A95 × 200 × 77.8 mm | FAG3319-BD-XL-2Z-TVH-L140-C395 × 200 × 77.8 mm | KOYO331995 × 200 × 77.8 mm |
|---|---|---|---|
| Comparable specifications | |||
| Brand | SKF | FAG | KOYO |
| Designation | 3319 A | 3319-BD-XL-2Z-TVH-L140-C3 | 3319 |
| Product family | Angular contact ball bearings | — | Double-row / Open |
| Detailed type | Double row angular contact ball bearing | Angular contact ball bearings | Angular contact ball bearings |
| Series | — | 3319 | — |
| Bore diameterd | 95 mm | 95 mm | 95 mm |
| Outside diameterD | 200 mm | 200 mm | 200 mm |
| WidthB | 77.8 mm | 77.8 mm | 77.8 mm |
| Basic dynamic load ratingC | 240 kN | 237 kN | 273 kN |
| Basic static load ratingC0 | 216 kN | 227 kN | 270 kN |
| Fatigue load limitPu | 7.5 kN | 13 kN | 14.9 kN |
| Reference speednref | 3600 r/min | 3700 r/min | — |
| Limiting speednG | 3200 r/min | 2550 r/min | 2000 r/min |
| Mass≈m | 9.66 kg | 9.98 kg | 10.9 kg |
| Precision class | — | P6 — Class 6 (ISO 492:2023) | — |
| Sealing | Without | 2Z — Non-contact shield on both sides | Open |
| Cage | Sheet metal | TVH — Solid cage made of glass-fiber reinforced polyamide PA66 | — |
| Bearing material | Bearing steel | — | — |
| Lubricant | None | L140 — Grease (L140/customer specific) | — |
| Minimum operating temperatureTmin | — | -30 °C | — |
| Maximum operating temperatureTmax | — | 120 °C | — |
| Capabilities & suitability | |||
| Radial load capacity | — | Yes | — |
| Axial load capacity in one direction | — | Yes | — |
| Axial load capacity in both directions | — | Yes | — |
| Lifetimelubricationfreedomfrommaintenance | — | Yes | — |
| Suitable for grease lubrication | — | Yes | — |
| Sealedonbothsides | — | Yes | — |
| Classification | |||
| Official Category Path | — | — | Angular contact ball bearings - Double-row - Open |
| Official Classification 1 | — | — | Angular contact ball bearings / Double-row / Open |
| Dimensions | |||
| Contact angle | 30.0 ° | — | — |
| Minimum chamfer dimensionrmin | — | 3 mm | — |
| Minimum chamfer dimensionrmin | — | 0.118 in | — |
| Shoulder diameter outer ringD1 | — | 170.94 mm | — |
| Shoulder diameter outer ringD1 | — | 6.73 in | — |
| Caliber diameter outer ringD2 | — | 175 mm | — |
| Caliber diameter outer ringD2 | — | 6.89 in | — |
| Shoulder diameter inner ringd1 | — | 135.88 mm | — |
| Shoulder diameter inner ringd1 | — | 5.35 in | — |
| Caliber diamter inner ringd2 | — | 133.61 mm | — |
| Caliber diamter inner ringd2 | — | 5.26 in | — |
| Distance between the apexes of the pressure conesa | — | 115.7 mm | — |
| Distance between the apexes of the pressure conesa | — | 4.555 in | — |
| Contact angleα | — | 30 ° | — |
| Engineering — Abutment dimensions | |||
| Abutment diameter shaftd a | min. 109 mm | — | — |
| Abutment diameter housingD a | max. 186 mm | — | — |
| Fillet radiusr a | max. 2.5 mm | — | — |
| Engineering — Calculation data | |||
| SKF performance class | SKF Explorer | — | — |
| Calculation factork r | 0.07 | — | — |
| Limiting valuee | 0.8 | — | — |
| Calculation factorX | 0.63 | — | — |
| Calculation factorY 0 | 0.66 | — | — |
| Calculation factorY 1 | 0.78 | — | — |
| Calculation factorY 2 | 1.2 | — | — |
| Engineering — Dimensions | |||
| Shoulder diameter inner ringd 1 | ≈ 127.07 mm | — | — |
| Shoulder diameter outer ringD 1 | ≈ 175.5 mm | — | — |
| Chamfer dimension inner ringr 1,2 | min. 3 mm | — | — |
| Distance pressure point(s)a | 118 mm | — | — |
| Logistics | |||
| Product net weight | 9.66 kg | — | — |
| eClass code | 23-05-08-03 | — | — |
| UNSPSC code | 31171531 | — | — |
| Main Dimensions & Performance Data | |||
| Basic dynamic load rating, radialCr | — | 237,000 N | — |
| Basic dynamic load rating, radialCr | — | 53,282.374 lbf | — |
| Basic static load rating, radialC0r | — | 227,000 N | — |
| Basic static load rating, radialC0r | — | 51,034.173 lbf | — |
| Fatigue load limit, radialCur | — | 13,000 N | — |
| Fatigue load limit, radialCur | — | 2,922.662 lbf | — |
| Manufacturer Identity | |||
| Schaeffler Product Code | — | 361250 | — |
| Official Class Key | — | — | 020-030-000 |
| Base Type | — | 3319 | — |
| Gpsd Group | — | S03 | — |
| Product Line Id | — | 14 | — |
| X Life Marking | — | XL | — |
| SAP material number | — | 0736942740030 | — |
| Base product | — | 2305080302 | — |
| Bearing X designation | — | 3319-BD-XL-2Z-TVH-L140-C3 | — |
| Mounting Manager ID | — | 3319-BD-XL-2Z-TVH-L140-C3 | — |
| Grease application ID | — | 3319-BD-XL-2Z-TVH-L140-C3 | — |
| Mounting dimensions | |||
| Minimum diameter shaft shoulderda min | — | 109 mm | — |
| Minimum diameter shaft shoulderda min | — | 4.291 in | — |
| Maximum diameter of housing shoulderDa max | — | 186 mm | — |
| Maximum diameter of housing shoulderDa max | — | 7.323 in | — |
| Maximum fillet radiusra max | — | 2.5 mm | — |
| Maximum fillet radiusra max | — | 0.098 in | — |
| Product characteristics | |||
| Design variantB | — | Bearing without filling slot | — |
| Changed internal design | — | D | — |
| Type of Seal2Z | — | Non-contact shield on both sides | — |
| Tolerance classP6 | — | Class 6 (ISO 492:2023) | — |
| Dimensional / heat stabilizationS0 | — | Rings dimensional stabilized up to 150° | — |
| Axial internal clearanceC3 | — | Group 3 (C3), bigger than CN | — |
| Product identity | |||
| Official product category | Angular contact ball bearings | — | — |
| Official taxonomy path | /products/rolling-bearings/ball-bearings/angular-contact-ball-bearings/double-row-angular-contact-ball-bearings | — | — |
| Structure group ID | BA2_001 | — | — |
| Available from SKF | Yes | — | — |
| Remanufacturable | No | — | — |
| Product Identity | |||
| Construction | — | Angular contact ball bearing 33..-BD-XL-2Z-TVH, double row, X-life, shields, plastic cage | — |
| Short Description | — | Angular contact ball bearing | — |
| Properties | |||
| Contact type | Normal contact (two-point contact) | — | — |
| Number of rows | 2 | — | — |
| Locating feature, bearing outer ring | Without | — | — |
| Ring type | One-piece inner and outer rings | — | — |
| Arrangement of contact angle (double-row bearing) | Back-to-back (O) | — | — |
| Matched arrangement | No | — | — |
| Universal matching bearing | No | — | — |
| Axial internal clearance | CN | — | — |
| Material, bearing | Bearing steel | — | — |
| Coating | Without | — | — |
| Relubrication feature | Without | — | — |
| Indicative carbon footprint for new product | 35.7 kg CO 2 e | — | — |
| Technical Data | |||
| d | — | — | 200 mm |
| B | — | — | 77.8 mm |
| R(Min.) | — | — | 3 mm |
| Bore Diameter (D) | — | 95 mm | — |
| Basic Load Ratings : Cr | — | — | 273 kN |
| Outside Diameter (D) | — | 200 mm | — |
| Basic Load Ratings : C0R | — | — | 270 kN |
| Width (B) | — | 77.8 mm | — |
| Fatigue Load Limit : Cu | — | — | 14.9 kN |
| Basic Dynamic Load Rating, Radial (Cr) | — | 237,000 N | — |
| Limiting Speeds(Grease Lub.) | — | — | 2000 min-1 |
| Basic Static Load Rating, Radial (C0R) | — | 227,000 N | — |
| Limiting Speeds(Oil Lub.) | — | — | 2600 min-1 |
| Operating Temperature Min. (Tmin) | — | -30 °C | — |
| Load Center Spread : A | — | — | 132.2 mm |
| Limiting Speed (Ng) | — | 2,550 1/min | — |
| Da(Min.) | — | — | 109 mm |
| Operating Temperature Max. (Tmax) | — | 120 °C | — |
| Da(Max.) | — | — | 186 mm |
| Reference Speed (Nϑr) | — | 3,700 1/min | — |
| Caliber Diameter Outer Ring (D2) | — | 175 mm | — |
| Ra(Max.) | — | — | 2.5 mm |
| Fatigue Load Limit, Radial (Cur) | — | 13,000 N | — |
| Mass(Refer.) | — | — | 10.9 kg |
| Minimum Diameter Shaft Shoulder (Da Min) | — | 109 mm | — |
| Shoulder Diameter Inner Ring (D1) | — | 135.88 mm | — |
| Maximum Diameter Of Housing Shoulder (Da Max) | — | 186 mm | — |
| Minimum Chamfer Dimension (Rmin) | — | 3 mm | — |
| Caliber Diameter Inner Ring (D1) | — | 133.61 mm | — |
| Maximum Fillet Radius (Ra Max) | — | 2.5 mm | — |
| Shoulder Diameter Outer Ring (D1) | — | 170.94 mm | — |
| Contact Angle (Α) | — | 30 ° | — |
| Distance Between The Apexes Of The Pressure Cones (A) | — | 115.7 mm | — |
| Temperature range | |||
| Operating temperature min.Tmin | — | -30 °C | — |
| Operating temperature min.Tmin | — | -22 °F | — |
| Operating temperature max.Tmax | — | 120 °C | — |
| Operating temperature max.Tmax | — | 248 °F | — |
Independent reference comparison based on the manufacturer data currently loaded. Always verify current limits, tolerances and suffix definitions with the official source before engineering selection.