Cross-brand designation analysis
COMPARE / VERIFY
Same-model Comparison
Explore products that share a base designation across loaded brands, with dimensional agreement and data gaps shown clearly.
Cross Reference centre · Interchange verification checklist · Understand suffix differences
You entered 293-670-E1-XL-MB. This table explores the base group 293; it does not preserve or approve every requested suffix. Search your complete marking first →
Automatic candidate selection
One base designation across loaded brands
Exact designations rank first. Dimensions, suffixes and other technical differences remain visible so the result is not mistaken for an interchangeability declaration.
Data incomplete
“293” across 2 loaded brands
The base designation is shared, but too few brands have complete boundary dimensions. Use Custom Compare when you want to choose exact suffix variants yourself.
Technical comparison
Choose exact variants instead →Brand differences at a glance
| Parameter | SKF293/500500 × 750 × mm | FAG293/850-E1-MB850 × 1250 × 243 mm |
|---|---|---|
| Comparable specifications | ||
| Brand | SKF | FAG |
| Designation | 293/500 | 293/850-E1-MB |
| Product family | Spherical roller thrust bearings | — |
| Detailed type | Spherical roller thrust bearing with machined metal cage | Axial spherical roller bearings |
| Series | — | 293/850 |
| Bore diameterd | 500 mm | 850 mm |
| Outside diameterD | 750 mm | 1250 mm |
| WidthB | — | 243 mm |
| HeightH | 150 mm | — |
| Basic dynamic load ratingC | 4490 kN | — |
| Basic static load ratingC0 | 20400 kN | — |
| Fatigue load limitPu | 1560 kN | — |
| Reference speednref | 430 r/min | 218 r/min |
| Limiting speednG | 800 r/min | 455 r/min |
| Mass≈m | 234 kg | 921 kg |
| Cage | Machined brass | MB — Solid brass cage |
| Minimum operating temperatureTmin | — | -30 °C |
| Maximum operating temperatureTmax | — | 200 °C |
| Capabilities & suitability | ||
| Radial load capacity | — | Yes |
| Axial load capacity in one direction | — | Yes |
| Suitable for grease lubrication | — | Yes |
| Suitable for oil lubrication | — | Yes |
| Unsealed design | — | Yes |
| Largebearing | — | Yes |
| Staticangularerrorandmisalignment | — | Yes |
| Dynamicangularerrorandmisalignment | — | Yes |
| Dimensions | ||
| Bore diameter housing washerD1 | — | 1,021 mm |
| Bore diameter housing washerD1 | — | 40.197 in |
| Rip diameter shaft washerd1 | — | 1,165 mm |
| Rip diameter shaft washerd1 | — | 45.866 in |
| Minimum chamfer dimensionrmin | — | 12 mm |
| Minimum chamfer dimensionrmin | — | 0.472 in |
| Height of the housing washerT1 | — | 118 mm |
| Height of the housing washerT1 | — | 4.646 in |
| Height of shaft washerT2 | — | 87 mm |
| Height of shaft washerT2 | — | 3.425 in |
| Height of the shaft washerT3 | — | 152 mm |
| Height of the shaft washerT3 | — | 5.984 in |
| Height of shaft washer, inc. lip ringT4 | — | 235 mm |
| Height of shaft washer, inc. lip ringT4 | — | 9.252 in |
| Distance of the center pointA | — | 468 mm |
| Distance of the center pointA | — | 18.425 in |
| Engineering — Abutment dimensions | ||
| Diameter of shaft abutmentd a | min. 630 mm | — |
| Diameter of housing abutmentD a | max. 675 mm | — |
| Fillet radiusr a | max. 5 mm | — |
| Engineering — Calculation data | ||
| Minimum axial load factorA | 40 | — |
| Engineering — Dimensions | ||
| Outside diameter of shaft washer end side faced 1 | ≈ 725 mm | — |
| Shoulder diameter outer ringD 1 | ≈ 611 mm | — |
| Width shaft washer or length of shaft washer bore diameter that fits on shaft (bearings with a machined cage)B | 50 mm | — |
| Height shaft washer + cageB 1 | 144 mm | — |
| Height housing washerC | 74 mm | — |
| Distance from shaft washer end side face to pressure points | 280 mm | — |
| Chamfer dimension shaft washerr 1,2 | min. 6 mm | — |
| Logistics | ||
| Product net weight | 234.0 kg | — |
| eClass code | 23-05-09-11 | — |
| UNSPSC code | 31171507 | — |
| Main Dimensions & Performance Data | ||
| Section heightT | — | 243 mm |
| Section heightT | — | 9.567 in |
| Basic dynamic load rating, axialCa | — | 12,900,000 N |
| Basic dynamic load rating, axialCa | — | 2,900,179.856 lbf |
| Basic static load rating, axialC0a | — | 62,000,000 N |
| Basic static load rating, axialC0a | — | 13,938,848.921 lbf |
| Fatigue load limit, axialCua | — | 5,500,000 N |
| Fatigue load limit, axialCua | — | 1,236,510.791 lbf |
| Manufacturer Identity | ||
| Schaeffler Product Code | — | 1051410 |
| Base Type | — | 293/850 |
| Gpsd Group | — | F03 |
| Product Line Id | — | 78 |
| X Life Marking | — | XL |
| SAP material number | — | 0389996920000 |
| Base product | — | 2305110301 |
| Bearing X designation | — | 293/850-E1-MB |
| Mounting Manager ID | — | 293/850-E1-MB |
| Mounting dimensions | ||
| Minimum diameter shaft shoulderda min | — | 1,045 mm |
| Minimum diameter shaft shoulderda min | — | 41.142 in |
| Maximum diameter of housing shoulderDa max | — | 1,137 mm |
| Maximum diameter of housing shoulderDa max | — | 44.764 in |
| Minimum bore diameter housingDb min | — | 1,273 mm |
| Minimum bore diameter housingDb min | — | 50.118 in |
| Maximum distance sleevedb max | — | 896 mm |
| Maximum distance sleevedb max | — | 35.276 in |
| Maximum recess radiusra max | — | 10 mm |
| Maximum recess radiusra max | — | 0.394 in |
| Product characteristics | ||
| Heat treatment | — | Standard |
| Constricted width and inclination variation | — | Standard |
| Product identity | ||
| Official product category | Spherical roller thrust bearings | — |
| Official taxonomy path | /products/rolling-bearings/roller-bearings/spherical-roller-thrust-bearings | — |
| Structure group ID | BHS_001 | — |
| Available from SKF | Yes | — |
| Remanufacturable | Yes | — |
| Product Identity | ||
| Construction | — | Axial spherical roller bearing 293..-E1-MB, with flanging ring |
| Short Description | — | Axial spherical roller bearing |
| Properties | ||
| Locating feature, housing washer | None | — |
| Bore type | Cylindrical | — |
| Tolerance class | Normal | — |
| Candidate for remanufacturing | Yes | — |
| Indicative carbon footprint for new product | 866.0 kg CO 2 e | — |
| Indicative carbon footprint for remanufactured product | 288.0 kg CO 2 e | — |
| Technical Data | ||
| Bore Diameter (D) | — | 850 mm |
| Outside Diameter (D) | — | 1,250 mm |
| Height (T) | — | 243 mm |
| Basic Dynamic Load Rating, Axial (Ca) | — | 12,900,000 N |
| Basic Static Load Rating, Axial (C0A) | — | 62,000,000 N |
| Operating Temperature Min. (Tmin) | — | -30 °C |
| Limiting Speed (Ng) | — | 455 1/min |
| Operating Temperature Max. (Tmax) | — | 200 °C |
| Reference Speed (Nϑr) | — | 218 1/min |
| Minimum Diameter Of Housing Shoulder (Db Min) | — | 1,273 mm |
| Bore Diameter Housing Washer (D1) | — | 1,021 mm |
| Height Of Shaft Washer (T2) | — | 87 mm |
| Height Of The Housing Washer (T1) | — | 118 mm |
| Rip Diameter Shaft Washer (D1) | — | 1,165 mm |
| Height Of The Shaft Washer (T3) | — | 152 mm |
| Minimum Diameter Shaft Shoulder (Da Min) | — | 1,045 mm |
| Distance Of The Center Point (A) | — | 468 mm |
| Height Of Shaft Washer, Inc. Lip Ring (T4) | — | 235 mm |
| Maximum Diameter Of Housing Shoulder (Da Max) | — | 1,137 mm |
| Maximum Distance Sleeve (Db Max) | — | 896 mm |
| Minimum Chamfer Dimension (Rmin) | — | 12 mm |
| Maximum Fillet Radius (Ra Max) | — | 10 mm |
| Fatigue Load Limit, Axial (Cua) | — | 5,500,000 N |
| Temperature range | ||
| Operating temperature min.Tmin | — | -30 °C |
| Operating temperature min.Tmin | — | -22 °F |
| Operating temperature max.Tmax | — | 200 °C |
| Operating temperature max.Tmax | — | 392 °F |
Automatic matching is a search aid, not an interchangeability declaration. Confirm the full suffix, tolerances, internal design and application limits before substitution.