Cross-brand designation analysis
COMPARE / VERIFY
Same-model Comparison
Explore products that share a base designation across loaded brands, with dimensional agreement and data gaps shown clearly.
Automatic candidate selection
One base designation across loaded brands
Exact designations rank first. Dimensions, suffixes and other technical differences remain visible so the result is not mistaken for an interchangeability declaration.
Dimensions differ
“29240” across 3 loaded brands
The base designation is shared, but the loaded boundary dimensions do not agree. Use Custom Compare when you want to choose exact suffix variants yourself.
Technical comparison
Choose exact variants instead →Brand differences at a glance
| Parameter | SKF29240 E200 × 280 × mm | FAG29240-E1-MB200 × 280 × 48 mm | KOYO29240200 × 280 × 15 mm |
|---|---|---|---|
| Comparable specifications | |||
| Brand | SKF | FAG | KOYO |
| Designation | 29240 E | 29240-E1-MB | 29240 |
| Product family | Spherical roller thrust bearings | — | — |
| Detailed type | Spherical roller thrust bearing with stamped steel cage | Axial spherical roller bearings | Axial spherical roller bearings |
| Series | — | 29240 | — |
| Bore diameterd | 200 mm | 200 mm | 200 mm |
| Outside diameterD | 280 mm | 280 mm | 280 mm |
| WidthB | — | 48 mm | 15 mm |
| HeightH | 48 mm | — | — |
| Basic dynamic load ratingC | 656 kN | — | — |
| Basic static load ratingC0 | 2650 kN | — | — |
| Fatigue load limitPu | 285 kN | — | 151 kN |
| Reference speednref | 1400 r/min | 1280 r/min | — |
| Limiting speednG | 2200 r/min | 2340 r/min | 1600 r/min |
| Mass≈m | 8.52 kg | 8.981 kg | 8.9 kg |
| Cage | Sheet metal | MB — Solid brass cage | — |
| Minimum operating temperatureTmin | — | -30 °C | — |
| Maximum operating temperatureTmax | — | 200 °C | — |
| Capabilities & suitability | |||
| Radial load capacity | — | Yes | — |
| Axial load capacity in one direction | — | Yes | — |
| Suitable for grease lubrication | — | Yes | — |
| Suitable for oil lubrication | — | Yes | — |
| Unsealed design | — | Yes | — |
| Staticangularerrorandmisalignment | — | Yes | — |
| Dynamicangularerrorandmisalignment | — | Yes | — |
| Classification | |||
| Official Category Path | — | — | Spherical thrust roller bearings |
| Official Classification 1 | — | — | Spherical thrust roller bearings |
| Dimensions | |||
| Bore diameter housing washerD1 | — | 232.5 mm | — |
| Bore diameter housing washerD1 | — | 9.154 in | — |
| Rip diameter shaft washerd1 | — | 265 mm | — |
| Rip diameter shaft washerd1 | — | 10.433 in | — |
| Minimum chamfer dimensionrmin | — | 2 mm | — |
| Minimum chamfer dimensionrmin | — | 0.079 in | — |
| Height of the housing washerT1 | — | 24 mm | — |
| Height of the housing washerT1 | — | 0.945 in | — |
| Height of shaft washerT2 | — | 17 mm | — |
| Height of shaft washerT2 | — | 0.669 in | — |
| Height of the shaft washerT3 | — | 30 mm | — |
| Height of the shaft washerT3 | — | 1.181 in | — |
| Height of shaft washer, inc. lip ringT4 | — | 45 mm | — |
| Height of shaft washer, inc. lip ringT4 | — | 1.772 in | — |
| Distance of the center pointA | — | 108 mm | — |
| Distance of the center pointA | — | 4.252 in | — |
| Engineering — Abutment dimensions | |||
| Diameter of shaft abutmentd a | min. 235 mm | — | — |
| Abutment diameter of spacer ringd b1 | max. 206 mm | — | — |
| Outside diameter of spacer ringd b2 | max. 207 mm | — | — |
| Length of spacer ringH a | min. 17 mm | — | — |
| Diameter of housing abutmentD a | max. 253 mm | — | — |
| Fillet radiusr a | max. 2 mm | — | — |
| Engineering — Calculation data | |||
| Minimum axial load factorA | 0.67 | — | — |
| Engineering — Dimensions | |||
| Outside diameter of shaft washer end side faced 1 | ≈ 260 mm | — | — |
| Shoulder diameter outer ringD 1 | ≈ 233 mm | — | — |
| Width shaft washer or length of shaft washer bore diameter that fits on shaft (bearings with a stamped steel cage)B | 30 mm | — | — |
| Height shaft washer + cageB 1 | 43.4 mm | — | — |
| Height housing washerC | 24 mm | — | — |
| Distance from shaft washer end side face to pressure points | 108 mm | — | — |
| Chamfer dimension shaft washerr 1,2 | min. 2 mm | — | — |
| Logistics | |||
| Product net weight | 8.52 kg | — | — |
| eClass code | 23-05-11-03 | — | — |
| UNSPSC code | 31171507 | — | — |
| Main Dimensions & Performance Data | |||
| Section heightT | — | 48 mm | — |
| Section heightT | — | 1.89 in | — |
| Basic dynamic load rating, axialCa | — | 650,000 N | — |
| Basic dynamic load rating, axialCa | — | 146,133.094 lbf | — |
| Basic static load rating, axialC0a | — | 2,650,000 N | — |
| Basic static load rating, axialC0a | — | 595,773.381 lbf | — |
| Fatigue load limit, axialCua | — | 320,000 N | — |
| Fatigue load limit, axialCua | — | 71,942.446 lbf | — |
| Manufacturer Identity | |||
| Schaeffler Product Code | — | 396465 | — |
| Official Class Key | — | — | 080-000-000 |
| Base Type | — | 29240 | — |
| Old Designation | — | ["29240E1MB"] | — |
| Gpsd Group | — | F02 | — |
| Product Line Id | — | 37 | — |
| SAP material number | — | 0389994390000 | — |
| Base product | — | 2305110301 | — |
| Bearing X designation | — | 29240-E1-MB | — |
| Mounting Manager ID | — | 29240-E1-MB | — |
| Mounting dimensions | |||
| Minimum diameter shaft shoulderda min | — | 240 mm | — |
| Minimum diameter shaft shoulderda min | — | 9.449 in | — |
| Maximum diameter of housing shoulderDa max | — | 258 mm | — |
| Maximum diameter of housing shoulderDa max | — | 10.157 in | — |
| Minimum bore diameter housingDb min | — | 284 mm | — |
| Minimum bore diameter housingDb min | — | 11.181 in | — |
| Maximum distance sleevedb max | — | 209 mm | — |
| Maximum distance sleevedb max | — | 8.228 in | — |
| Maximum recess radiusra max | — | 2 mm | — |
| Maximum recess radiusra max | — | 0.079 in | — |
| Product characteristics | |||
| Heat treatment | — | Standard | — |
| Locating feature, housing washer | None | Without | — |
| Handling thread holes | — | Without | — |
| Constricted width and inclination variation | — | Standard | — |
| Test certificate | — | Without | — |
| Product identity | |||
| Official product category | Spherical roller thrust bearings | — | — |
| Official taxonomy path | /products/rolling-bearings/roller-bearings/spherical-roller-thrust-bearings | — | — |
| Structure group ID | BHS_001 | — | — |
| Available from SKF | Yes | — | — |
| Remanufacturable | No | — | — |
| Product Identity | |||
| Construction | — | Axial spherical roller bearing 292..-E1-MB, with flanging ring | — |
| Short Description | — | Axial spherical roller bearing | — |
| Properties | |||
| Bore type | Cylindrical | — | — |
| Tolerance class | Normal | — | — |
| Indicative carbon footprint for new product | 31.5 kg CO 2 e | — | — |
| Technical Data | |||
| d | — | — | 280 mm |
| T | — | — | 48 mm |
| R(Min.) | — | — | 2 mm |
| Bore Diameter (D) | — | 200 mm | — |
| Basic Load Ratings Ca | — | — | 641 kN |
| Outside Diameter (D) | — | 280 mm | — |
| Basic Load Ratings C0A | — | — | 2170 kN |
| Height (T) | — | 48 mm | — |
| Fatigue Load Limit : Cu | — | — | 151 kN |
| Basic Dynamic Load Rating, Axial (Ca) | — | 650,000 N | — |
| Limiting Speeds(Oil Lub.) | — | — | 1600 min-1 |
| Basic Static Load Rating, Axial (C0A) | — | 2,650,000 N | — |
| D1 | — | — | 236 mm |
| Operating Temperature Min. (Tmin) | — | -30 °C | — |
| Limiting Speed (Ng) | — | 2,340 1/min | — |
| B | — | — | 15 mm |
| Operating Temperature Max. (Tmax) | — | 200 °C | — |
| B1 | — | — | 45 mm |
| Reference Speed (Nϑr) | — | 1,280 1/min | — |
| C | — | — | 24 mm |
| Minimum Diameter Of Housing Shoulder (Db Min) | — | 284 mm | — |
| A | — | — | 108 mm |
| Bore Diameter Housing Washer (D1) | — | 232.5 mm | — |
| Da(Min.) | — | — | 235 mm |
| Height Of Shaft Washer (T2) | — | 17 mm | — |
| Da(Max.) | — | — | 255 mm |
| Height Of The Housing Washer (T1) | — | 24 mm | — |
| Ra(Max.) | — | — | 2 mm |
| Rip Diameter Shaft Washer (D1) | — | 265 mm | — |
| Mass(Refer.) | — | — | 8.90 kg |
| Height Of The Shaft Washer (T3) | — | 30 mm | — |
| Minimum Diameter Shaft Shoulder (Da Min) | — | 240 mm | — |
| Distance Of The Center Point (A) | — | 108 mm | — |
| Height Of Shaft Washer, Inc. Lip Ring (T4) | — | 45 mm | — |
| Maximum Diameter Of Housing Shoulder (Da Max) | — | 258 mm | — |
| Maximum Distance Sleeve (Db Max) | — | 209 mm | — |
| Minimum Chamfer Dimension (Rmin) | — | 2 mm | — |
| Maximum Fillet Radius (Ra Max) | — | 2 mm | — |
| Fatigue Load Limit, Axial (Cua) | — | 320,000 N | — |
| Temperature range | |||
| Operating temperature min.Tmin | — | -30 °C | — |
| Operating temperature min.Tmin | — | -22 °F | — |
| Operating temperature max.Tmax | — | 200 °C | — |
| Operating temperature max.Tmax | — | 392 °F | — |
Automatic matching is a search aid, not an interchangeability declaration. Confirm the full suffix, tolerances, internal design and application limits before substitution.