Cross-brand designation analysis
COMPARE / VERIFY
Same-model Comparison
Explore products that share a base designation across loaded brands, with dimensional agreement and data gaps shown clearly.
Cross Reference centre · Interchange verification checklist · Understand suffix differences
You entered 23332-BEA-XL-MA1-T41B-C3. This table explores the base group 23332; it does not preserve or approve every requested suffix. Search your complete marking first →
Automatic candidate selection
One base designation across loaded brands
Exact designations rank first. Dimensions, suffixes and other technical differences remain visible so the result is not mistaken for an interchangeability declaration.
Dimensions verified
“23332” across 2 loaded brands
At least two brands share the same bore, outside diameter and width. Use Custom Compare when you want to choose exact suffix variants yourself.
Technical comparison
Choose exact variants instead →Brand differences at a glance
| Parameter | FAG23332-BEA-XL-MA1-C3160 × 340 × 136 mm | TIMKEN23332EMBW33160 × 340 × 136 mm |
|---|---|---|
| Comparable specifications | ||
| Brand | FAG | TIMKEN |
| Designation | 23332-BEA-XL-MA1-C3 | 23332EMBW33 |
| Product family | — | Radial SRB |
| Detailed type | Spherical roller bearings | Spherical roller bearings |
| Series | 23332 | EX26893 |
| Bore diameterd | 160 mm | 160 mm |
| Outside diameterD | 340 mm | 340 mm |
| WidthB | 136 mm | 136 mm |
| Basic dynamic load ratingC | 2000 kN | 2000 kN |
| Basic static load ratingC0 | 2370 kN | 2530 kN |
| Fatigue load limitPu | 186 kN | — |
| Limiting speednG | 2010 r/min | — |
| Mass≈m | 62.6 kg | 61.24 kg |
| Internal clearance | C3 (Group 3) — Internal clearance larger than CN | — |
| Sealing | — | Open |
| Cage | MA1 — Solid brass cage | Brass cage |
| Minimum operating temperatureTmin | -30 °C | — |
| Maximum operating temperatureTmax | 200 °C | — |
| Calculation Factors | ||
| K Factor | — | 0.00 |
| Y1 Factor | — | 1.62 |
| Y2 Factor | — | 2.41 |
| Y0 Factor | — | 1.58 |
| E Factor | — | 0.42 |
| Cg Factor | — | 0.0894 |
| Calculation factors | ||
| Limiting value of Fa/Fr for the applicability of diff. Values of factors X and Ye | 0.42 | — |
| Dynamic axial load factorY1 | 1.6 | — |
| Dynamic axial load factorY2 | 2.38 | — |
| Static axial load factorY0 | 1.56 | — |
| Capabilities & suitability | ||
| Radial load capacity | Yes | — |
| Axial load capacity in one direction | Yes | — |
| Axial load capacity in both directions | Yes | — |
| Suitable for grease lubrication | Yes | — |
| Suitable for oil lubrication | Yes | — |
| Unsealed design | Yes | — |
| Largebearing | Yes | — |
| Staticangularerrorandmisalignment | Yes | — |
| Dynamicangularerrorandmisalignment | Yes | — |
| Dimensions | ||
| Minimum chamfer dimensionrmin | 4 mm | — |
| Minimum chamfer dimensionrmin | 0.157 in | — |
| Bore diameter outer ringD1 | 280.8 mm | — |
| Bore diameter outer ringD1 | 11.055 in | — |
| Diameter lubrication holeds | 9.5 mm | — |
| Diameter lubrication holeds | 0.374 in | — |
| Width of lubricating groovens | 17.7 mm | — |
| Width of lubricating groovens | 0.697 in | — |
| Main Dimensions & Performance Data | ||
| Basic dynamic load rating, radialCr | 2,000,000 N | — |
| Basic dynamic load rating, radialCr | 449,640.288 lbf | — |
| Basic static load rating, radialC0r | 2,370,000 N | — |
| Basic static load rating, radialC0r | 532,823.741 lbf | — |
| Fatigue load limit, radialCur | 186,000 N | — |
| Fatigue load limit, radialCur | 41,816.547 lbf | — |
| Manufacturer Identity | ||
| Schaeffler Product Code | 1733342 | — |
| Material Number | — | 000000000190028642 |
| Base Type | 23332 | — |
| World Assembly Part Number | — | 23332EMBW33 |
| Gpsd Group | F03 | — |
| Inner Ring Part Number | — | 160ASDY33 |
| Product Line Id | 78 | — |
| Outer Ring Part Number | — | 160ESDC33W33 |
| X Life Marking | XL | — |
| Drawing Number | — | M944831 |
| Upc | — | 0087796296701 |
| Official Source System | — | CORE BP - DS DF |
| Official Last Run | — | 2026-08-23T20:02:47.483 |
| SAP material number | 0955626640030 | — |
| Base product | 2305091122 | — |
| Mounting dimensions | ||
| Minimum diameter shaft shoulderda min | 192 mm | — |
| Minimum diameter shaft shoulderda min | 7.559 in | — |
| Maximum diameter of housing shoulderDa max | 323 mm | — |
| Maximum diameter of housing shoulderDa max | 12.717 in | — |
| Maximum recess radiusra max | 3 mm | — |
| Maximum recess radiusra max | 0.118 in | — |
| Product characteristics | ||
| DesignBEA | With lose center lip ring | — |
| Bore typeZ | Cylindrical | — |
| Radial internal clearanceC3 (Group 3) | Internal clearance larger than CN | — |
| Relubrication feature | Standard | — |
| Locating feature, bearing outer ring | Without | — |
| Handling thread holes | Without | — |
| Special material | Standard | — |
| Spherical roller bearing for vibrating screensT41A | For vibrating screens | — |
| Product Identity | ||
| Short Description | Spherical Roller Bearing | — |
| Type Description | — | Radial SRB |
| Construction | — | Spherical Roller Bearing | Imperial Series | 6.2992 in Bore | 13.3858 in OD | 5.3543 in Width | Open | Cylindrical Bore | Brass Cage | C0 Clearance | Bearing contains application features |
| Number Of Rows | — | 2 |
| Tapered Bore | — | N |
| Technical Data | ||
| Bore Diameter (D) | 160 mm | — |
| Outside Diamater (D) | 340 mm | — |
| Total Width (B) | 136 mm | — |
| Overall Width | — | 0.000 mm |
| Basic Dynamic Load Rating, Radial (Cr) | 2,000,000 N | — |
| Radial Rating | — | 2,000,000 N |
| Basic Static Load Rating, Radial (C0R) | 2,370,000 N | — |
| Axial Rating | — | 0 N |
| Diameter Lubrication Hole (Ds) | 9.5 mm | — |
| Dynamic Rating C1 | — | 2,000,000 N |
| Operating Temperature Min. (Tmin) | -30 °C | — |
| Dynamic Rating C90 | — | 0 N |
| Minimum Diameter Shaft Shoulder (Da) | 192 mm | — |
| Dynamic Axial Rating Ca90 | — | 0 N |
| Operating Temperature Max. (Tmax) | 200 °C | — |
| Dynamic Axial Rating Ca1 | — | 0 N |
| Limiting Speed (Limiting Spe) | 2,010 1/min | — |
| Static Radial Rating C0 | — | 2,530,000 N |
| Maximum Recess Radius (Ra Max) | 3 mm | — |
| Extended Dynamic Rating Ce | — | 0 N |
| Maximum Diameter Of Housing Shoulder (Da) | 323 mm | — |
| Static Axial Rating C0A | — | 0 N |
| Limiting Value Of Fa/Fr For The Applicability Of Diff. Values Of Factors X And Y (E) | 0.42 | — |
| Width Of Lubricating Groove (Ns) | 17.7 mm | — |
| Dynamic Axial Load Factor (Y1) | 1.6 | — |
| Bore Diameter Outer Ring (D1) | 280.8 mm | — |
| Minimum Chamfer Dimension (Rmin) | 4 mm | — |
| Static Axial Load Factor (Y0) | 1.56 | — |
| Dynamic Axial Load Factor (Y2) | 2.38 | — |
| Fatigue Load Limit, Radial (Cur) | 186,000 N | — |
| Temperature range | ||
| Operating temperature min.Tmin | -30 °C | — |
| Operating temperature min.Tmin | -22 °F | — |
| Operating temperature max.Tmax | 200 °C | — |
| Operating temperature max.Tmax | 392 °F | — |
Automatic matching is a search aid, not an interchangeability declaration. Confirm the full suffix, tolerances, internal design and application limits before substitution.