Choose the exact products yourself
CUSTOM / 08 MAX
Custom Comparison
Search a designation, choose up to eight exact suffix variants, and build your own side-by-side technical table.
Build your own set
Choose exact variants
For an automatic one-result-per-brand view, use Same-model Comparison. This page is for deliberate manual selection.
Auto-compare 23332 by brand →Model matches
Select products
The first result per loaded brand is preselected. Choose up to eight exact variants and update the table.
Technical comparison
2 products side by side
A dash means that the loaded manufacturer source did not provide that field. It does not mean the feature is absent.
| Parameter | FAG23332-BEA-XL-MA1-C3160 × 340 × 136 mm | TIMKEN23332EMBW33160 × 340 × 136 mm |
|---|---|---|
| Comparable specifications | ||
| Brand | FAG | TIMKEN |
| Designation | 23332-BEA-XL-MA1-C3 | 23332EMBW33 |
| Product family | — | Radial SRB |
| Detailed type | Spherical roller bearings | Spherical roller bearings |
| Series | 23332 | EX26893 |
| Bore diameterd | 160 mm | 160 mm |
| Outside diameterD | 340 mm | 340 mm |
| WidthB | 136 mm | 136 mm |
| Basic dynamic load ratingC | 2000 kN | 2000 kN |
| Basic static load ratingC0 | 2370 kN | 2530 kN |
| Fatigue load limitPu | 186 kN | — |
| Limiting speednG | 2010 r/min | — |
| Mass≈m | 62.6 kg | 61.24 kg |
| Internal clearance | C3 (Group 3) — Internal clearance larger than CN | — |
| Sealing | — | Open |
| Cage | MA1 — Solid brass cage | Brass cage |
| Minimum operating temperatureTmin | -30 °C | — |
| Maximum operating temperatureTmax | 200 °C | — |
| Calculation Factors | ||
| K Factor | — | 0.00 |
| Y1 Factor | — | 1.62 |
| Y2 Factor | — | 2.41 |
| Y0 Factor | — | 1.58 |
| E Factor | — | 0.42 |
| Cg Factor | — | 0.0894 |
| Calculation factors | ||
| Limiting value of Fa/Fr for the applicability of diff. Values of factors X and Ye | 0.42 | — |
| Dynamic axial load factorY1 | 1.6 | — |
| Dynamic axial load factorY2 | 2.38 | — |
| Static axial load factorY0 | 1.56 | — |
| Capabilities & suitability | ||
| Radial load capacity | Yes | — |
| Axial load capacity in one direction | Yes | — |
| Axial load capacity in both directions | Yes | — |
| Suitable for grease lubrication | Yes | — |
| Suitable for oil lubrication | Yes | — |
| Unsealed design | Yes | — |
| Largebearing | Yes | — |
| Staticangularerrorandmisalignment | Yes | — |
| Dynamicangularerrorandmisalignment | Yes | — |
| Dimensions | ||
| Minimum chamfer dimensionrmin | 4 mm | — |
| Minimum chamfer dimensionrmin | 0.157 in | — |
| Bore diameter outer ringD1 | 280.8 mm | — |
| Bore diameter outer ringD1 | 11.055 in | — |
| Diameter lubrication holeds | 9.5 mm | — |
| Diameter lubrication holeds | 0.374 in | — |
| Width of lubricating groovens | 17.7 mm | — |
| Width of lubricating groovens | 0.697 in | — |
| Main Dimensions & Performance Data | ||
| Basic dynamic load rating, radialCr | 2,000,000 N | — |
| Basic dynamic load rating, radialCr | 449,640.288 lbf | — |
| Basic static load rating, radialC0r | 2,370,000 N | — |
| Basic static load rating, radialC0r | 532,823.741 lbf | — |
| Fatigue load limit, radialCur | 186,000 N | — |
| Fatigue load limit, radialCur | 41,816.547 lbf | — |
| Manufacturer Identity | ||
| Schaeffler Product Code | 1733342 | — |
| Material Number | — | 000000000190028642 |
| Base Type | 23332 | — |
| World Assembly Part Number | — | 23332EMBW33 |
| Gpsd Group | F03 | — |
| Inner Ring Part Number | — | 160ASDY33 |
| Product Line Id | 78 | — |
| Outer Ring Part Number | — | 160ESDC33W33 |
| X Life Marking | XL | — |
| Drawing Number | — | M944831 |
| Upc | — | 0087796296701 |
| Official Source System | — | CORE BP - DS DF |
| Official Last Run | — | 2026-08-23T20:02:47.483 |
| SAP material number | 0955626640030 | — |
| Base product | 2305091122 | — |
| Mounting dimensions | ||
| Minimum diameter shaft shoulderda min | 192 mm | — |
| Minimum diameter shaft shoulderda min | 7.559 in | — |
| Maximum diameter of housing shoulderDa max | 323 mm | — |
| Maximum diameter of housing shoulderDa max | 12.717 in | — |
| Maximum recess radiusra max | 3 mm | — |
| Maximum recess radiusra max | 0.118 in | — |
| Product characteristics | ||
| DesignBEA | With lose center lip ring | — |
| Bore typeZ | Cylindrical | — |
| Radial internal clearanceC3 (Group 3) | Internal clearance larger than CN | — |
| Relubrication feature | Standard | — |
| Locating feature, bearing outer ring | Without | — |
| Handling thread holes | Without | — |
| Special material | Standard | — |
| Spherical roller bearing for vibrating screensT41A | For vibrating screens | — |
| Product Identity | ||
| Short Description | Spherical Roller Bearing | — |
| Type Description | — | Radial SRB |
| Construction | — | Spherical Roller Bearing | Imperial Series | 6.2992 in Bore | 13.3858 in OD | 5.3543 in Width | Open | Cylindrical Bore | Brass Cage | C0 Clearance | Bearing contains application features |
| Number Of Rows | — | 2 |
| Tapered Bore | — | N |
| Technical Data | ||
| Bore Diameter (D) | 160 mm | — |
| Outside Diamater (D) | 340 mm | — |
| Total Width (B) | 136 mm | — |
| Overall Width | — | 0.000 mm |
| Basic Dynamic Load Rating, Radial (Cr) | 2,000,000 N | — |
| Radial Rating | — | 2,000,000 N |
| Basic Static Load Rating, Radial (C0R) | 2,370,000 N | — |
| Axial Rating | — | 0 N |
| Diameter Lubrication Hole (Ds) | 9.5 mm | — |
| Dynamic Rating C1 | — | 2,000,000 N |
| Operating Temperature Min. (Tmin) | -30 °C | — |
| Dynamic Rating C90 | — | 0 N |
| Minimum Diameter Shaft Shoulder (Da) | 192 mm | — |
| Dynamic Axial Rating Ca90 | — | 0 N |
| Operating Temperature Max. (Tmax) | 200 °C | — |
| Dynamic Axial Rating Ca1 | — | 0 N |
| Limiting Speed (Limiting Spe) | 2,010 1/min | — |
| Static Radial Rating C0 | — | 2,530,000 N |
| Maximum Recess Radius (Ra Max) | 3 mm | — |
| Extended Dynamic Rating Ce | — | 0 N |
| Maximum Diameter Of Housing Shoulder (Da) | 323 mm | — |
| Static Axial Rating C0A | — | 0 N |
| Limiting Value Of Fa/Fr For The Applicability Of Diff. Values Of Factors X And Y (E) | 0.42 | — |
| Width Of Lubricating Groove (Ns) | 17.7 mm | — |
| Dynamic Axial Load Factor (Y1) | 1.6 | — |
| Bore Diameter Outer Ring (D1) | 280.8 mm | — |
| Minimum Chamfer Dimension (Rmin) | 4 mm | — |
| Static Axial Load Factor (Y0) | 1.56 | — |
| Dynamic Axial Load Factor (Y2) | 2.38 | — |
| Fatigue Load Limit, Radial (Cur) | 186,000 N | — |
| Temperature range | ||
| Operating temperature min.Tmin | -30 °C | — |
| Operating temperature min.Tmin | -22 °F | — |
| Operating temperature max.Tmax | 200 °C | — |
| Operating temperature max.Tmax | 392 °F | — |
Independent reference comparison based on the manufacturer data currently loaded. Always verify current limits, tolerances and suffix definitions with the official source before engineering selection.