Cross-brand designation analysis
COMPARE / VERIFY
Same-model Comparison
Explore products that share a base designation across loaded brands, with dimensional agreement and data gaps shown clearly.
Automatic candidate selection
One base designation across loaded brands
Exact designations rank first. Dimensions, suffixes and other technical differences remain visible so the result is not mistaken for an interchangeability declaration.
Dimensions differ
“23330” across 2 loaded brands
The base designation is shared, but the loaded boundary dimensions do not agree. Use Custom Compare when you want to choose exact suffix variants yourself.
Technical comparison
Choose exact variants instead →Brand differences at a glance
| Parameter | FAG23330-E1A-XL-MA1-T41A150 × 320 × 128 mm | TIMKEN23330EMBW33W800150 × 319.987 × 128 mm |
|---|---|---|
| Comparable specifications | ||
| Brand | FAG | TIMKEN |
| Designation | 23330-E1A-XL-MA1-T41A | 23330EMBW33W800 |
| Product family | — | Radial SRB |
| Detailed type | Spherical roller bearings | Spherical roller bearings |
| Series | 23330 | EX27481 |
| Bore diameterd | 150 mm | 150 mm |
| Outside diameterD | 320 mm | 319.987 mm |
| WidthB | 128 mm | 128 mm |
| Basic dynamic load ratingC | 1830 kN | 1780 kN |
| Basic static load ratingC0 | 2170 kN | 2130 kN |
| Fatigue load limitPu | 168 kN | — |
| Limiting speednG | 2060 r/min | — |
| Mass≈m | 51.2 kg | 50.45 kg |
| Internal clearance | C4 (Group 4) — Internal clearance larger than C3 | — |
| Sealing | — | Open |
| Cage | MA1 — Solid brass cage | Brass cage |
| Minimum operating temperatureTmin | -30 °C | — |
| Maximum operating temperatureTmax | 200 °C | — |
| Calculation Factors | ||
| K Factor | — | 0.00 |
| Y1 Factor | — | 1.64 |
| Y2 Factor | — | 2.44 |
| Y0 Factor | — | 1.60 |
| E Factor | — | 0.41 |
| Cg Factor | — | 0.0852 |
| Calculation factors | ||
| Limiting value of Fa/Fr for the applicability of diff. Values of factors X and Ye | 0.41 | — |
| Dynamic axial load factorY1 | 1.64 | — |
| Dynamic axial load factorY2 | 2.44 | — |
| Static axial load factorY0 | 1.6 | — |
| Capabilities & suitability | ||
| Radial load capacity | Yes | — |
| Axial load capacity in one direction | Yes | — |
| Axial load capacity in both directions | Yes | — |
| Suitable for grease lubrication | Yes | — |
| Suitable for oil lubrication | Yes | — |
| Staticangularerrorandmisalignment | Yes | — |
| Dynamicangularerrorandmisalignment | Yes | — |
| Dimensions | ||
| Minimum chamfer dimensionrmin | 4 mm | — |
| Minimum chamfer dimensionrmin | 0.157 in | — |
| Bore diameter outer ringD1 | 264.3 mm | — |
| Bore diameter outer ringD1 | 10.406 in | — |
| Raceway diameter of the inner ringd2 | 181 mm | — |
| Raceway diameter of the inner ringd2 | 7.126 in | — |
| Diameter lubrication holeds | 8 mm | — |
| Diameter lubrication holeds | 0.315 in | — |
| Width of lubricating groovens | 15 mm | — |
| Width of lubricating groovens | 0.591 in | — |
| Main Dimensions & Performance Data | ||
| Basic dynamic load rating, radialCr | 1,830,000 N | — |
| Basic dynamic load rating, radialCr | 411,420.863 lbf | — |
| Basic static load rating, radialC0r | 2,170,000 N | — |
| Basic static load rating, radialC0r | 487,859.712 lbf | — |
| Fatigue load limit, radialCur | 168,000 N | — |
| Fatigue load limit, radialCur | 37,769.784 lbf | — |
| Manufacturer Identity | ||
| Schaeffler Product Code | 1714811 | — |
| Material Number | — | 000000000190041552 |
| Base Type | 23330 | — |
| World Assembly Part Number | — | 23330EMBW33W800 |
| Gpsd Group | F02 | — |
| Inner Ring Part Number | — | 150ASDY33W88 |
| Product Line Id | 37 | — |
| Outer Ring Part Number | — | 150ESDC33W33W22W38A |
| X Life Marking | XL | — |
| Drawing Number | — | M945690 |
| Upc | — | 0087796296671 |
| Official Source System | — | CORE BP - DS DF |
| Official Last Run | — | 2026-08-23T20:02:47.843 |
| SAP material number | 0954878160000 | — |
| Base product | 2305091121 | — |
| Bearing X designation | 23330-E1A-XL-MA1-T41A | — |
| Mounting Manager ID | 23330-E1A-XL-MA1-T41A | — |
| Grease application ID | 23330-E1A-XL-MA1-T41A | — |
| Mounting dimensions | ||
| Minimum diameter shaft shoulderda min | 167 mm | — |
| Minimum diameter shaft shoulderda min | 6.575 in | — |
| Maximum diameter of housing shoulderDa max | 303 mm | — |
| Maximum diameter of housing shoulderDa max | 11.929 in | — |
| Maximum recess radiusra max | 3 mm | — |
| Maximum recess radiusra max | 0.118 in | — |
| Product characteristics | ||
| DesignE1A | Without central rip | — |
| Bore typeZ | Cylindrical | — |
| Radial internal clearanceC4 (Group 4) | Internal clearance larger than C3 | — |
| Relubrication feature | Standard | — |
| Special material | Standard | — |
| Spherical roller bearing for vibrating screensT41A | For vibrating screens | — |
| Product Identity | ||
| Construction | Spherical roller bearing 223..-E1A-XL-K-M, symmetric 2 outer ribs | Spherical Roller Bearing | Imperial Series | 5.9055 in Bore | 12.5979 in OD | 5.0394 in Width | Open | Cylindrical Bore | Brass Cage | C0 Clearance | Bearing contains application features |
| Short Description | Spherical Roller Bearing | — |
| Type Description | — | Radial SRB |
| Number Of Rows | — | 2 |
| Tapered Bore | — | N |
| Technical Data | ||
| Bore Diameter (D) | 150 mm | — |
| Outside Diamater (D) | 320 mm | — |
| Overall Width | — | 0.000 mm |
| Total Width (B) | 128 mm | — |
| Radial Rating | — | 1,780,000 N |
| Basic Dynamic Load Rating, Radial (Cr) | 1,830,000 N | — |
| Axial Rating | — | 0 N |
| Basic Static Load Rating, Radial (C0R) | 2,170,000 N | — |
| Dynamic Rating C1 | — | 1,780,000 N |
| Diameter Lubrication Hole (Ds) | 8 mm | — |
| Dynamic Rating C90 | — | 0 N |
| Operating Temperature Min. (Tmin) | -30 °C | — |
| Dynamic Axial Rating Ca90 | — | 0 N |
| Minimum Diameter Shaft Shoulder (Da) | 167 mm | — |
| Dynamic Axial Rating Ca1 | — | 0 N |
| Operating Temperature Max. (Tmax) | 200 °C | — |
| Static Radial Rating C0 | — | 2,130,000 N |
| Limiting Speed (Limiting Spe) | 2,060 1/min | — |
| Extended Dynamic Rating Ce | — | 0 N |
| Maximum Recess Radius (Ra Max) | 3 mm | — |
| Static Axial Rating C0A | — | 0 N |
| Maximum Diameter Of Housing Shoulder (Da) | 303 mm | — |
| Limiting Value Of Fa/Fr For The Applicability Of Diff. Values Of Factors X And Y (E) | 0.41 | — |
| Width Of Lubricating Groove (Ns) | 15 mm | — |
| Dynamic Axial Load Factor (Y1) | 1.64 | — |
| Bore Diameter Outer Ring (D1) | 264.3 mm | — |
| Raceway Diameter Of The Inner Ring (D2) | 181 mm | — |
| Minimum Chamfer Dimension (Rmin) | 4 mm | — |
| Static Axial Load Factor (Y0) | 1.6 | — |
| Dynamic Axial Load Factor (Y2) | 2.44 | — |
| Fatigue Load Limit, Radial (Cur) | 168,000 N | — |
| Temperature range | ||
| Operating temperature min.Tmin | -30 °C | — |
| Operating temperature min.Tmin | -22 °F | — |
| Operating temperature max.Tmax | 200 °C | — |
| Operating temperature max.Tmax | 392 °F | — |
Automatic matching is a search aid, not an interchangeability declaration. Confirm the full suffix, tolerances, internal design and application limits before substitution.