Choose the exact products yourself
CUSTOM / 08 MAX
Custom Comparison
Search a designation, choose up to eight exact suffix variants, and build your own side-by-side technical table.
Build your own set
Choose exact variants
For an automatic one-result-per-brand view, use Same-model Comparison. This page is for deliberate manual selection.
Auto-compare 23330 by brand →Model matches
Select products
The first result per loaded brand is preselected. Choose up to eight exact variants and update the table.
Technical comparison
2 products side by side
A dash means that the loaded manufacturer source did not provide that field. It does not mean the feature is absent.
| Parameter | FAG23330-E1A-XL-MA1-T41A150 × 320 × 128 mm | TIMKEN23330EMBW33W800150 × 319.987 × 128 mm |
|---|---|---|
| Comparable specifications | ||
| Brand | FAG | TIMKEN |
| Designation | 23330-E1A-XL-MA1-T41A | 23330EMBW33W800 |
| Product family | — | Radial SRB |
| Detailed type | Spherical roller bearings | Spherical roller bearings |
| Series | 23330 | EX27481 |
| Bore diameterd | 150 mm | 150 mm |
| Outside diameterD | 320 mm | 319.987 mm |
| WidthB | 128 mm | 128 mm |
| Basic dynamic load ratingC | 1830 kN | 1780 kN |
| Basic static load ratingC0 | 2170 kN | 2130 kN |
| Fatigue load limitPu | 168 kN | — |
| Limiting speednG | 2060 r/min | — |
| Mass≈m | 51.2 kg | 50.45 kg |
| Internal clearance | C4 (Group 4) — Internal clearance larger than C3 | — |
| Sealing | — | Open |
| Cage | MA1 — Solid brass cage | Brass cage |
| Minimum operating temperatureTmin | -30 °C | — |
| Maximum operating temperatureTmax | 200 °C | — |
| Calculation Factors | ||
| K Factor | — | 0.00 |
| Y1 Factor | — | 1.64 |
| Y2 Factor | — | 2.44 |
| Y0 Factor | — | 1.60 |
| E Factor | — | 0.41 |
| Cg Factor | — | 0.0852 |
| Calculation factors | ||
| Limiting value of Fa/Fr for the applicability of diff. Values of factors X and Ye | 0.41 | — |
| Dynamic axial load factorY1 | 1.64 | — |
| Dynamic axial load factorY2 | 2.44 | — |
| Static axial load factorY0 | 1.6 | — |
| Capabilities & suitability | ||
| Radial load capacity | Yes | — |
| Axial load capacity in one direction | Yes | — |
| Axial load capacity in both directions | Yes | — |
| Suitable for grease lubrication | Yes | — |
| Suitable for oil lubrication | Yes | — |
| Staticangularerrorandmisalignment | Yes | — |
| Dynamicangularerrorandmisalignment | Yes | — |
| Dimensions | ||
| Minimum chamfer dimensionrmin | 4 mm | — |
| Minimum chamfer dimensionrmin | 0.157 in | — |
| Bore diameter outer ringD1 | 264.3 mm | — |
| Bore diameter outer ringD1 | 10.406 in | — |
| Raceway diameter of the inner ringd2 | 181 mm | — |
| Raceway diameter of the inner ringd2 | 7.126 in | — |
| Diameter lubrication holeds | 8 mm | — |
| Diameter lubrication holeds | 0.315 in | — |
| Width of lubricating groovens | 15 mm | — |
| Width of lubricating groovens | 0.591 in | — |
| Main Dimensions & Performance Data | ||
| Basic dynamic load rating, radialCr | 1,830,000 N | — |
| Basic dynamic load rating, radialCr | 411,420.863 lbf | — |
| Basic static load rating, radialC0r | 2,170,000 N | — |
| Basic static load rating, radialC0r | 487,859.712 lbf | — |
| Fatigue load limit, radialCur | 168,000 N | — |
| Fatigue load limit, radialCur | 37,769.784 lbf | — |
| Manufacturer Identity | ||
| Schaeffler Product Code | 1714811 | — |
| Material Number | — | 000000000190041552 |
| Base Type | 23330 | — |
| World Assembly Part Number | — | 23330EMBW33W800 |
| Gpsd Group | F02 | — |
| Inner Ring Part Number | — | 150ASDY33W88 |
| Product Line Id | 37 | — |
| Outer Ring Part Number | — | 150ESDC33W33W22W38A |
| X Life Marking | XL | — |
| Drawing Number | — | M945690 |
| Upc | — | 0087796296671 |
| Official Source System | — | CORE BP - DS DF |
| Official Last Run | — | 2026-08-23T20:02:47.843 |
| SAP material number | 0954878160000 | — |
| Base product | 2305091121 | — |
| Bearing X designation | 23330-E1A-XL-MA1-T41A | — |
| Mounting Manager ID | 23330-E1A-XL-MA1-T41A | — |
| Grease application ID | 23330-E1A-XL-MA1-T41A | — |
| Mounting dimensions | ||
| Minimum diameter shaft shoulderda min | 167 mm | — |
| Minimum diameter shaft shoulderda min | 6.575 in | — |
| Maximum diameter of housing shoulderDa max | 303 mm | — |
| Maximum diameter of housing shoulderDa max | 11.929 in | — |
| Maximum recess radiusra max | 3 mm | — |
| Maximum recess radiusra max | 0.118 in | — |
| Product characteristics | ||
| DesignE1A | Without central rip | — |
| Bore typeZ | Cylindrical | — |
| Radial internal clearanceC4 (Group 4) | Internal clearance larger than C3 | — |
| Relubrication feature | Standard | — |
| Special material | Standard | — |
| Spherical roller bearing for vibrating screensT41A | For vibrating screens | — |
| Product Identity | ||
| Construction | Spherical roller bearing 223..-E1A-XL-K-M, symmetric 2 outer ribs | Spherical Roller Bearing | Imperial Series | 5.9055 in Bore | 12.5979 in OD | 5.0394 in Width | Open | Cylindrical Bore | Brass Cage | C0 Clearance | Bearing contains application features |
| Short Description | Spherical Roller Bearing | — |
| Type Description | — | Radial SRB |
| Number Of Rows | — | 2 |
| Tapered Bore | — | N |
| Technical Data | ||
| Bore Diameter (D) | 150 mm | — |
| Outside Diamater (D) | 320 mm | — |
| Overall Width | — | 0.000 mm |
| Total Width (B) | 128 mm | — |
| Radial Rating | — | 1,780,000 N |
| Basic Dynamic Load Rating, Radial (Cr) | 1,830,000 N | — |
| Axial Rating | — | 0 N |
| Basic Static Load Rating, Radial (C0R) | 2,170,000 N | — |
| Dynamic Rating C1 | — | 1,780,000 N |
| Diameter Lubrication Hole (Ds) | 8 mm | — |
| Dynamic Rating C90 | — | 0 N |
| Operating Temperature Min. (Tmin) | -30 °C | — |
| Dynamic Axial Rating Ca90 | — | 0 N |
| Minimum Diameter Shaft Shoulder (Da) | 167 mm | — |
| Dynamic Axial Rating Ca1 | — | 0 N |
| Operating Temperature Max. (Tmax) | 200 °C | — |
| Static Radial Rating C0 | — | 2,130,000 N |
| Limiting Speed (Limiting Spe) | 2,060 1/min | — |
| Extended Dynamic Rating Ce | — | 0 N |
| Maximum Recess Radius (Ra Max) | 3 mm | — |
| Static Axial Rating C0A | — | 0 N |
| Maximum Diameter Of Housing Shoulder (Da) | 303 mm | — |
| Limiting Value Of Fa/Fr For The Applicability Of Diff. Values Of Factors X And Y (E) | 0.41 | — |
| Width Of Lubricating Groove (Ns) | 15 mm | — |
| Dynamic Axial Load Factor (Y1) | 1.64 | — |
| Bore Diameter Outer Ring (D1) | 264.3 mm | — |
| Raceway Diameter Of The Inner Ring (D2) | 181 mm | — |
| Minimum Chamfer Dimension (Rmin) | 4 mm | — |
| Static Axial Load Factor (Y0) | 1.6 | — |
| Dynamic Axial Load Factor (Y2) | 2.44 | — |
| Fatigue Load Limit, Radial (Cur) | 168,000 N | — |
| Temperature range | ||
| Operating temperature min.Tmin | -30 °C | — |
| Operating temperature min.Tmin | -22 °F | — |
| Operating temperature max.Tmax | 200 °C | — |
| Operating temperature max.Tmax | 392 °F | — |
Independent reference comparison based on the manufacturer data currently loaded. Always verify current limits, tolerances and suffix definitions with the official source before engineering selection.