Cross-brand designation analysis
COMPARE / VERIFY
Same-model Comparison
Explore products that share a base designation across loaded brands, with dimensional agreement and data gaps shown clearly.
Automatic candidate selection
One base designation across loaded brands
Exact designations rank first. Dimensions, suffixes and other technical differences remain visible so the result is not mistaken for an interchangeability declaration.
Dimensions verified
“22268” across 2 loaded brands
At least two brands share the same bore, outside diameter and width. Use Custom Compare when you want to choose exact suffix variants yourself.
Technical comparison
Choose exact variants instead →Brand differences at a glance
| Parameter | FAG22268-BEA-XL-MB1340 × 620 × 165 mm | KOYO22268R340 × 620 × 165 mm |
|---|---|---|
| Comparable specifications | ||
| Brand | FAG | KOYO |
| Designation | 22268-BEA-XL-MB1 | 22268R |
| Product family | — | Spherical roller bearings |
| Detailed type | Spherical roller bearings | Spherical roller bearings |
| Series | 22268 | — |
| Bore diameterd | 340 mm | 340 mm |
| Outside diameterD | 620 mm | 620 mm |
| WidthB | 165 mm | 165 mm |
| Basic dynamic load ratingC | 4100 kN | 4430 kN |
| Basic static load ratingC0 | 5600 kN | 5430 kN |
| Fatigue load limitPu | 460 kN | 551 kN |
| Reference speednref | 770 r/min | — |
| Limiting speednG | 1280 r/min | 440 r/min |
| Mass≈m | 221 kg | 221 kg |
| Internal clearance | CN (Group N) — Normal internal clearance | — |
| Cage | MB1 — Solid brass cage | — |
| Minimum operating temperatureTmin | -30 °C | — |
| Maximum operating temperatureTmax | 200 °C | — |
| Calculation factors | ||
| Limiting value of Fa/Fr for the applicability of diff. Values of factors X and Ye | 0.26 | — |
| Dynamic axial load factorY1 | 2.62 | — |
| Dynamic axial load factorY2 | 3.9 | — |
| Static axial load factorY0 | 2.56 | — |
| Capabilities & suitability | ||
| Radial load capacity | Yes | — |
| Axial load capacity in one direction | Yes | — |
| Axial load capacity in both directions | Yes | — |
| Suitable for grease lubrication | Yes | — |
| Suitable for oil lubrication | Yes | — |
| Unsealed design | Yes | — |
| Largebearing | Yes | — |
| Staticangularerrorandmisalignment | Yes | — |
| Dynamicangularerrorandmisalignment | Yes | — |
| Classification | ||
| Official Category Path | — | Spherical roller bearings - Spherical roller bearings |
| Official Classification 1 | — | Spherical roller bearings |
| Dimensions | ||
| Minimum chamfer dimensionrmin | 6 mm | — |
| Minimum chamfer dimensionrmin | 0.236 in | — |
| Bore diameter outer ringD1 | 538.7 mm | — |
| Bore diameter outer ringD1 | 21.209 in | — |
| Diameter lubrication holeds | 12.5 mm | — |
| Diameter lubrication holeds | 0.492 in | — |
| Width of lubricating groovens | 23.5 mm | — |
| Width of lubricating groovens | 0.925 in | — |
| Main Dimensions & Performance Data | ||
| Basic dynamic load rating, radialCr | 4,100,000 N | — |
| Basic dynamic load rating, radialCr | 921,762.59 lbf | — |
| Basic static load rating, radialC0r | 5,600,000 N | — |
| Basic static load rating, radialC0r | 1,258,992.806 lbf | — |
| Fatigue load limit, radialCur | 460,000 N | — |
| Fatigue load limit, radialCur | 103,417.266 lbf | — |
| Manufacturer Identity | ||
| Schaeffler Product Code | 1717941 | — |
| Official Class Key | — | 060-010-000 |
| Base Type | 22268 | — |
| Product Line Id | 78 | — |
| X Life Marking | XL | — |
| Base product | 2305091122 | — |
| Mounting dimensions | ||
| Minimum diameter shaft shoulderda min | 366 mm | — |
| Minimum diameter shaft shoulderda min | 14.409 in | — |
| Maximum diameter of housing shoulderDa max | 594 mm | — |
| Maximum diameter of housing shoulderDa max | 23.386 in | — |
| Maximum recess radiusra max | 5 mm | — |
| Maximum recess radiusra max | 0.197 in | — |
| Product characteristics | ||
| DesignBEA | With lose center lip ring | — |
| Bore typeZ | Cylindrical | — |
| Radial internal clearanceCN (Group N) | Normal internal clearance | — |
| Relubrication feature | Standard | — |
| Product Identity | ||
| Construction | Spherical roller bearing 222..-BEA-XL-MB1, symmetric 2 outer ribs with rib washer | — |
| Short Description | Spherical Roller Bearing | — |
| Technical Data | ||
| d | — | 620 mm |
| B | — | 165 mm |
| Bore Diameter (D) | 340 mm | — |
| R(Min.) | — | 6 mm |
| Outside Diamater (D) | 620 mm | — |
| Basic Load Ratings : Cr | — | 4430 kN |
| Total Width (B) | 165 mm | — |
| Basic Load Ratings : C0R | — | 5430 kN |
| Basic Dynamic Load Rating, Radial (Cr) | 4,100,000 N | — |
| Fatigue Load Limit : Cu | — | 551 kN |
| Basic Static Load Rating, Radial (C0R) | 5,600,000 N | — |
| Limiting Speeds(Grease Lub.) | — | 440 min-1 |
| Diameter Lubrication Hole (Ds) | 12.5 mm | — |
| Limiting Speeds(Oil Lub.) | — | 590 min-1 |
| Operating Temperature Min. (Tmin) | -30 °C | — |
| Constant E | — | 0.28 |
| Minimum Diameter Shaft Shoulder (Da) | 366 mm | — |
| Axial Load Factors : Y1 | — | 2.43 |
| Operating Temperature Max. (Tmax) | 200 °C | — |
| Axial Load Factors : Y2 | — | 3.61 |
| Limiting Speed (Limiting Spe) | 1,280 1/min | — |
| Axial Load Factors : Y0 | — | 2.37 |
| Reference Speed (Nϑr) | 770 1/min | — |
| Da(Min.) | — | 368 mm |
| Maximum Recess Radius (Ra Max) | 5 mm | — |
| Da(Max.) | — | 592 mm |
| Maximum Diameter Of Housing Shoulder (Da) | 594 mm | — |
| Ra(Max.) | — | 5 mm |
| Limiting Value Of Fa/Fr For The Applicability Of Diff. Values Of Factors X And Y (E) | 0.26 | — |
| Mass(Refer.) | — | 221 kg |
| Width Of Lubricating Groove (Ns) | 23.5 mm | — |
| Dynamic Axial Load Factor (Y1) | 2.62 | — |
| Bore Diameter Outer Ring (D1) | 538.7 mm | — |
| Minimum Chamfer Dimension (Rmin) | 6 mm | — |
| Static Axial Load Factor (Y0) | 2.56 | — |
| Dynamic Axial Load Factor (Y2) | 3.9 | — |
| Fatigue Load Limit, Radial (Cur) | 460,000 N | — |
| Temperature range | ||
| Operating temperature min.Tmin | -30 °C | — |
| Operating temperature min.Tmin | -22 °F | — |
| Operating temperature max.Tmax | 200 °C | — |
| Operating temperature max.Tmax | 392 °F | — |
Automatic matching is a search aid, not an interchangeability declaration. Confirm the full suffix, tolerances, internal design and application limits before substitution.