Choose the exact products yourself
CUSTOM / 08 MAX
Custom Comparison
Search a designation, choose up to eight exact suffix variants, and build your own side-by-side technical table.
Build your own set
Choose exact variants
For an automatic one-result-per-brand view, use Same-model Comparison. This page is for deliberate manual selection.
Auto-compare 22268 by brand →Model matches
Select products
The first result per loaded brand is preselected. Choose up to eight exact variants and update the table.
Technical comparison
2 products side by side
A dash means that the loaded manufacturer source did not provide that field. It does not mean the feature is absent.
| Parameter | FAG22268-BEA-XL-MB1340 × 620 × 165 mm | KOYO22268R340 × 620 × 165 mm |
|---|---|---|
| Comparable specifications | ||
| Brand | FAG | KOYO |
| Designation | 22268-BEA-XL-MB1 | 22268R |
| Product family | — | Spherical roller bearings |
| Detailed type | Spherical roller bearings | Spherical roller bearings |
| Series | 22268 | — |
| Bore diameterd | 340 mm | 340 mm |
| Outside diameterD | 620 mm | 620 mm |
| WidthB | 165 mm | 165 mm |
| Basic dynamic load ratingC | 4100 kN | 4430 kN |
| Basic static load ratingC0 | 5600 kN | 5430 kN |
| Fatigue load limitPu | 460 kN | 551 kN |
| Reference speednref | 770 r/min | — |
| Limiting speednG | 1280 r/min | 440 r/min |
| Mass≈m | 221 kg | 221 kg |
| Internal clearance | CN (Group N) — Normal internal clearance | — |
| Cage | MB1 — Solid brass cage | — |
| Minimum operating temperatureTmin | -30 °C | — |
| Maximum operating temperatureTmax | 200 °C | — |
| Calculation factors | ||
| Limiting value of Fa/Fr for the applicability of diff. Values of factors X and Ye | 0.26 | — |
| Dynamic axial load factorY1 | 2.62 | — |
| Dynamic axial load factorY2 | 3.9 | — |
| Static axial load factorY0 | 2.56 | — |
| Capabilities & suitability | ||
| Radial load capacity | Yes | — |
| Axial load capacity in one direction | Yes | — |
| Axial load capacity in both directions | Yes | — |
| Suitable for grease lubrication | Yes | — |
| Suitable for oil lubrication | Yes | — |
| Unsealed design | Yes | — |
| Largebearing | Yes | — |
| Staticangularerrorandmisalignment | Yes | — |
| Dynamicangularerrorandmisalignment | Yes | — |
| Classification | ||
| Official Category Path | — | Spherical roller bearings - Spherical roller bearings |
| Official Classification 1 | — | Spherical roller bearings |
| Dimensions | ||
| Minimum chamfer dimensionrmin | 6 mm | — |
| Minimum chamfer dimensionrmin | 0.236 in | — |
| Bore diameter outer ringD1 | 538.7 mm | — |
| Bore diameter outer ringD1 | 21.209 in | — |
| Diameter lubrication holeds | 12.5 mm | — |
| Diameter lubrication holeds | 0.492 in | — |
| Width of lubricating groovens | 23.5 mm | — |
| Width of lubricating groovens | 0.925 in | — |
| Main Dimensions & Performance Data | ||
| Basic dynamic load rating, radialCr | 4,100,000 N | — |
| Basic dynamic load rating, radialCr | 921,762.59 lbf | — |
| Basic static load rating, radialC0r | 5,600,000 N | — |
| Basic static load rating, radialC0r | 1,258,992.806 lbf | — |
| Fatigue load limit, radialCur | 460,000 N | — |
| Fatigue load limit, radialCur | 103,417.266 lbf | — |
| Manufacturer Identity | ||
| Schaeffler Product Code | 1717941 | — |
| Official Class Key | — | 060-010-000 |
| Base Type | 22268 | — |
| Product Line Id | 78 | — |
| X Life Marking | XL | — |
| Base product | 2305091122 | — |
| Mounting dimensions | ||
| Minimum diameter shaft shoulderda min | 366 mm | — |
| Minimum diameter shaft shoulderda min | 14.409 in | — |
| Maximum diameter of housing shoulderDa max | 594 mm | — |
| Maximum diameter of housing shoulderDa max | 23.386 in | — |
| Maximum recess radiusra max | 5 mm | — |
| Maximum recess radiusra max | 0.197 in | — |
| Product characteristics | ||
| DesignBEA | With lose center lip ring | — |
| Bore typeZ | Cylindrical | — |
| Radial internal clearanceCN (Group N) | Normal internal clearance | — |
| Relubrication feature | Standard | — |
| Product Identity | ||
| Construction | Spherical roller bearing 222..-BEA-XL-MB1, symmetric 2 outer ribs with rib washer | — |
| Short Description | Spherical Roller Bearing | — |
| Technical Data | ||
| d | — | 620 mm |
| B | — | 165 mm |
| Bore Diameter (D) | 340 mm | — |
| R(Min.) | — | 6 mm |
| Outside Diamater (D) | 620 mm | — |
| Basic Load Ratings : Cr | — | 4430 kN |
| Total Width (B) | 165 mm | — |
| Basic Load Ratings : C0R | — | 5430 kN |
| Basic Dynamic Load Rating, Radial (Cr) | 4,100,000 N | — |
| Fatigue Load Limit : Cu | — | 551 kN |
| Basic Static Load Rating, Radial (C0R) | 5,600,000 N | — |
| Limiting Speeds(Grease Lub.) | — | 440 min-1 |
| Diameter Lubrication Hole (Ds) | 12.5 mm | — |
| Limiting Speeds(Oil Lub.) | — | 590 min-1 |
| Operating Temperature Min. (Tmin) | -30 °C | — |
| Constant E | — | 0.28 |
| Minimum Diameter Shaft Shoulder (Da) | 366 mm | — |
| Axial Load Factors : Y1 | — | 2.43 |
| Operating Temperature Max. (Tmax) | 200 °C | — |
| Axial Load Factors : Y2 | — | 3.61 |
| Limiting Speed (Limiting Spe) | 1,280 1/min | — |
| Axial Load Factors : Y0 | — | 2.37 |
| Reference Speed (Nϑr) | 770 1/min | — |
| Da(Min.) | — | 368 mm |
| Maximum Recess Radius (Ra Max) | 5 mm | — |
| Da(Max.) | — | 592 mm |
| Maximum Diameter Of Housing Shoulder (Da) | 594 mm | — |
| Ra(Max.) | — | 5 mm |
| Limiting Value Of Fa/Fr For The Applicability Of Diff. Values Of Factors X And Y (E) | 0.26 | — |
| Mass(Refer.) | — | 221 kg |
| Width Of Lubricating Groove (Ns) | 23.5 mm | — |
| Dynamic Axial Load Factor (Y1) | 2.62 | — |
| Bore Diameter Outer Ring (D1) | 538.7 mm | — |
| Minimum Chamfer Dimension (Rmin) | 6 mm | — |
| Static Axial Load Factor (Y0) | 2.56 | — |
| Dynamic Axial Load Factor (Y2) | 3.9 | — |
| Fatigue Load Limit, Radial (Cur) | 460,000 N | — |
| Temperature range | ||
| Operating temperature min.Tmin | -30 °C | — |
| Operating temperature min.Tmin | -22 °F | — |
| Operating temperature max.Tmax | 200 °C | — |
| Operating temperature max.Tmax | 392 °F | — |
Independent reference comparison based on the manufacturer data currently loaded. Always verify current limits, tolerances and suffix definitions with the official source before engineering selection.