Find an engine or exact Clevite part
Selections apply immediately; the button also works without JavaScript. Use a full engine code or part number. Displacement alone can match several different engine families.
2026 manufacturer catalogue, not a universal fitment promise
Source: MAHLE/Clevite EB-20-26 engine-bearing catalogue. Entries retain the catalogue make section, application conditions and printed page. A make heading groups source applications; it is not proof that every engine listed was manufactured by that vehicle brand.
Numbers are Clevite references, not SKF/NTN cross-references. A set, a member shell and a separate thrust washer are different items. Unresolved or conflicting dimensions remain unavailable instead of being guessed.
Source-listed bearing records
3 records
Shop dimensions are inches, including rows for metric engines. These are standard-size source dimensions, not permission to use a listed oil clearance in a different engine.
Application: GMC · block 172
6.2L 376 CID OHV 16V V8 General Motors LS9 VIN Code: 'T' (2010-2013)
Member of set: MS-2294P. The member identifier is not automatically a complete set.
- Standard shaft diameter
- 2.5588–2.5593 in
- Vertical oil clearance
- 0.0002–0.0023 in
- Maximum wall at crown
- 0.0957 in
- Bearing OD or housing bore
- 2.7509–2.7515 in
- Maximum axial length
- 0.8050 in
MAHLE/Clevite EB-20-26 · printed page 634 · reference e4f071bb. No installation torque or machining approval is implied.
Application: GMC · block 173
6.2L 376 CID OHV 16V V8 General Motors LSA VIN Code: 'P' (2009-2015)
Member of set: MS-2294P. The member identifier is not automatically a complete set.
- Standard shaft diameter
- 2.5588–2.5593 in
- Vertical oil clearance
- 0.0002–0.0023 in
- Maximum wall at crown
- 0.0957 in
- Bearing OD or housing bore
- 2.7509–2.7515 in
- Maximum axial length
- 0.8050 in
MAHLE/Clevite EB-20-26 · printed page 634 · reference 03f292f1. No installation torque or machining approval is implied.
Application: GMC · block 198
7.0L 427 CID OHV 16V V8 General Motors LS7 VIN Code: 'E' (2006-2013)
Member of set: MS-2294P. The member identifier is not automatically a complete set.
- Standard shaft diameter
- 2.5588–2.5593 in
- Vertical oil clearance
- 0.0002–0.0023 in
- Maximum wall at crown
- 0.0957 in
- Bearing OD or housing bore
- 2.7509–2.7515 in
- Maximum axial length
- 0.8050 in
MAHLE/Clevite EB-20-26 · printed page 648 · reference dc3e2fe3. No installation torque or machining approval is implied.
Use the reference correctly
Identify before comparing
Keep engine code, production year, VIN qualifiers, bearing position and the existing shell markings. A 350, 1.8 or 4.6 label is not a unique engine identification.
Measure the actual assembly
Standard journal dimensions do not describe a worn or reground shaft. Verify the installed housing, required repair size and oil clearance with the engine-specific procedure.
Keep unresolved values unresolved
Empty dimensional fields can reflect set-only entries, incomplete source rows or conflicts. They do not mean zero clearance, and another entry's values are not a substitute.
Reference basis and limitations
This independent lookup reorganises factual entries from the 2026 MAHLE/Clevite engine-bearing catalogue. The original source fingerprint, extraction record and application block are retained privately. The catalogue source is not a guarantee of current stock, current vehicle approval or complete coverage of every engine. BearingScope does not sell these parts or provide a rebuild service.