Identify the engine. Keep the conditions.

Clevite MB3759P(F) — engine applications & dimensions

Look up source-listed Clevite engine bearing parts, their engine/year conditions, set relationships and available shop dimensions. Preserve the engine version and catalogue notes before comparing a candidate.

Find an engine or exact Clevite part

Selections apply immediately; the button also works without JavaScript. Use a full engine code or part number. Displacement alone can match several different engine families.

2026 manufacturer catalogue, not a universal fitment promise

Source: MAHLE/Clevite EB-20-26 engine-bearing catalogue. Entries retain the catalogue make section, application conditions and printed page. A make heading groups source applications; it is not proof that every engine listed was manufactured by that vehicle brand.

Numbers are Clevite references, not SKF/NTN cross-references. A set, a member shell and a separate thrust washer are different items. Unresolved or conflicting dimensions remain unavailable instead of being guessed.

Source-listed bearing records

2 records

Shop dimensions are inches, including rows for metric engines. These are standard-size source dimensions, not permission to use a listed oil clearance in a different engine.

Crankshaft main

MB3759P(F)

Crankshaft main set member

Application: GMC · block 98
4.0L 244 CID DOHC 32V V8 General Motors VIN Code: 'C' (1995-1999), 'C' (2001-2003) 4.6L 281 CID DOHC 32V V8 General Motors L37 VIN Code: '9' (1993-2010), 'S' (2011) 4.6L 281 CID DOHC 32V V8 General Motors L37 Northstar VIN Code: '9' (1993) 4.6L 281 CID DOHC 32V V8 General Motors LD8 VIN Code: '6' (2010-2011), 'Y' (1993-2010) 4.6L 281 CID DOHC 32V V8 General Motors LH2 VIN Code: 'A' (2004-2010)

Member of set: MS-2206P. The member identifier is not automatically a complete set.

Standard shaft diameter: 2.5330–2.5338 in
Vertical oil clearance: 0.0011–0.0024 in
Maximum wall at crown: 0.1591 in
Bearing OD or housing bore: 2.8516–2.8521 in
Maximum axial length: 0.9250 in

MAHLE/Clevite EB-20-26 · printed page 601 · reference 7de3640d. No installation torque or machining approval is implied.

Crankshaft main

MB3759P(F)

Crankshaft main set member

Application: GMC TRUCK · block 60
4.6L 281 CID DOHC 32V V8 General Motors LD8 VIN Code: 'Y' (1997-1999)

Member of set: MS-2206P. The member identifier is not automatically a complete set.

Standard shaft diameter: 2.5330–2.5338 in
Vertical oil clearance: 0.0011–0.0024 in
Maximum wall at crown: 0.1591 in
Bearing OD or housing bore: 2.8516–2.8521 in
Maximum axial length: 0.9250 in

MAHLE/Clevite EB-20-26 · printed page 751 · reference 5bd7ec7e. No installation torque or machining approval is implied.

Use the reference correctly

Identify before comparing

Keep engine code, production year, VIN qualifiers, bearing position and the existing shell markings. A 350, 1.8 or 4.6 label is not a unique engine identification.

Measure the actual assembly

Standard journal dimensions do not describe a worn or reground shaft. Verify the installed housing, required repair size and oil clearance with the engine-specific procedure.

Keep unresolved values unresolved

Empty dimensional fields can reflect set-only entries, incomplete source rows or conflicts. They do not mean zero clearance, and another entry's values are not a substitute.

Read the oil-clearance, material and installation reference →Check replacement evidence →Separate wheel, hub and seal vehicle reference →

Reference basis and limitations

This independent lookup reorganises factual entries from the 2026 MAHLE/Clevite engine-bearing catalogue. The original source fingerprint, extraction record and application block are retained privately. The catalogue source is not a guarantee of current stock, current vehicle approval or complete coverage of every engine. BearingScope does not sell these parts or provide a rebuild service.