Identify the engine. Keep the conditions.

Clevite MB3341A — engine applications & dimensions

Look up source-listed Clevite engine bearing parts, their engine/year conditions, set relationships and available shop dimensions. Preserve the engine version and catalogue notes before comparing a candidate.

Find an engine or exact Clevite part

Selections apply immediately; the button also works without JavaScript. Use a full engine code or part number. Displacement alone can match several different engine families.

2026 manufacturer catalogue, not a universal fitment promise

Source: MAHLE/Clevite EB-20-26 engine-bearing catalogue. Entries retain the catalogue make section, application conditions and printed page. A make heading groups source applications; it is not proof that every engine listed was manufactured by that vehicle brand.

Numbers are Clevite references, not SKF/NTN cross-references. A set, a member shell and a separate thrust washer are different items. Unresolved or conflicting dimensions remain unavailable instead of being guessed.

Source-listed bearing records

2 records

Shop dimensions are inches, including rows for metric engines. These are standard-size source dimensions, not permission to use a listed oil clearance in a different engine.

Crankshaft main

MB3341A

Crankshaft main set member

Application: NISSAN · block 19
2.4L 2389 CC DOHC 16V L4 Nissan KA24DE VIN Code: 'A' (1995-1998), 'B' (1993-1997), 'M' (1991-1994) 2.4L 2389 CC DOHC 16V L4 Nissan KA24DE (1997-2001) 2.4L 2389 CC SOHC 12V L4 Nissan KA24E VIN Code: 'F' (1990-1992), 'H' (1989-1995)

Member of set: MS-1949A. The member identifier is not automatically a complete set.

Catalogue conditions / continuation notes

NOTE: Contains .15mm Oversized Length Flanged Bearing

Bearing Set 5mm

Standard shaft diameter: 2.3606–2.3615 in
Vertical oil clearance: 0.0005–0.0038 in
Maximum wall at crown: 0.0722 in
Bearing OD or housing bore: 2.5063–2.5068 in
Maximum axial length: 0.7480 in

MAHLE/Clevite EB-20-26 · printed page 894 · reference c8722043. No installation torque or machining approval is implied.

Crankshaft main

MB3341A

Crankshaft main set member

Application: NISSAN TRUCK · block 6
2.4L 2389 CC DOHC 16V L4 Nissan KA24DE (1998-2004) 2.4L 2389 CC SOHC 12V L4 Nissan KA24E (1990-1997)

Member of set: MS-1949A. The member identifier is not automatically a complete set.

Catalogue conditions / continuation notes

For Years: 1998-2003 NOTE: Contains .15mm Oversized Length Flanged Bearing

Bearing Set 5mm

Standard shaft diameter: 2.3606–2.3615 in
Vertical oil clearance: 0.0005–0.0038 in
Maximum wall at crown: 0.0722 in
Bearing OD or housing bore: 2.5063–2.5068 in
Maximum axial length: 0.7480 in

MAHLE/Clevite EB-20-26 · printed page 901 · reference d278dba1. No installation torque or machining approval is implied.

Use the reference correctly

Identify before comparing

Keep engine code, production year, VIN qualifiers, bearing position and the existing shell markings. A 350, 1.8 or 4.6 label is not a unique engine identification.

Measure the actual assembly

Standard journal dimensions do not describe a worn or reground shaft. Verify the installed housing, required repair size and oil clearance with the engine-specific procedure.

Keep unresolved values unresolved

Empty dimensional fields can reflect set-only entries, incomplete source rows or conflicts. They do not mean zero clearance, and another entry's values are not a substitute.

Read the oil-clearance, material and installation reference →Check replacement evidence →Separate wheel, hub and seal vehicle reference →

Reference basis and limitations

This independent lookup reorganises factual entries from the 2026 MAHLE/Clevite engine-bearing catalogue. The original source fingerprint, extraction record and application block are retained privately. The catalogue source is not a guarantee of current stock, current vehicle approval or complete coverage of every engine. BearingScope does not sell these parts or provide a rebuild service.