Find an engine or exact Clevite part
Selections apply immediately; the button also works without JavaScript. Use a full engine code or part number. Displacement alone can match several different engine families.
2026 manufacturer catalogue, not a universal fitment promise
Source: MAHLE/Clevite EB-20-26 engine-bearing catalogue. Entries retain the catalogue make section, application conditions and printed page. A make heading groups source applications; it is not proof that every engine listed was manufactured by that vehicle brand.
Numbers are Clevite references, not SKF/NTN cross-references. A set, a member shell and a separate thrust washer are different items. Unresolved or conflicting dimensions remain unavailable instead of being guessed.
Source-listed bearing records
2 records
Shop dimensions are inches, including rows for metric engines. These are standard-size source dimensions, not permission to use a listed oil clearance in a different engine.
Application: INFINITI · block 1
2.0L 122 CID DOHC 16V L4 Nissan SR20DE VIN Code: 'C' (1991-1996) 2.0L 2000 CC DOHC 16V L4 Nissan SR20DE VIN Code: 'C' (1999-2002)
- Standard shaft diameter
- 1.8880–1.8890 in
- Vertical oil clearance
- 0.0008–0.0018 in
- Maximum wall at crown
- 0.0595 in
- Bearing OD or housing bore
- 2.0079–2.0079 in
- Maximum axial length
- 0.669 in
MAHLE/Clevite EB-20-26 · printed page 799 · reference 3a78ac9c. No installation torque or machining approval is implied.
Application: NISSAN · block 18
2.0L 122 CID DOHC 16V L4 Nissan SR20DE VIN Code: 'B' (1995-2001), 'G' (1991-1994)
- Standard shaft diameter
- 1.8880–1.8890 in
- Vertical oil clearance
- 0.0008–0.0018 in
- Maximum wall at crown
- 0.0595 in
- Bearing OD or housing bore
- 2.0079–2.0079 in
- Maximum axial length
- 0.669 in
MAHLE/Clevite EB-20-26 · printed page 894 · reference e1dcaaba. No installation torque or machining approval is implied.
Use the reference correctly
Identify before comparing
Keep engine code, production year, VIN qualifiers, bearing position and the existing shell markings. A 350, 1.8 or 4.6 label is not a unique engine identification.
Measure the actual assembly
Standard journal dimensions do not describe a worn or reground shaft. Verify the installed housing, required repair size and oil clearance with the engine-specific procedure.
Keep unresolved values unresolved
Empty dimensional fields can reflect set-only entries, incomplete source rows or conflicts. They do not mean zero clearance, and another entry's values are not a substitute.
Reference basis and limitations
This independent lookup reorganises factual entries from the 2026 MAHLE/Clevite engine-bearing catalogue. The original source fingerprint, extraction record and application block are retained privately. The catalogue source is not a guarantee of current stock, current vehicle approval or complete coverage of every engine. BearingScope does not sell these parts or provide a rebuild service.