Find an engine or exact Clevite part
Selections apply immediately; the button also works without JavaScript. Use a full engine code or part number. Displacement alone can match several different engine families.
2026 manufacturer catalogue, not a universal fitment promise
Source: MAHLE/Clevite EB-20-26 engine-bearing catalogue. Entries retain the catalogue make section, application conditions and printed page. A make heading groups source applications; it is not proof that every engine listed was manufactured by that vehicle brand.
Numbers are Clevite references, not SKF/NTN cross-references. A set, a member shell and a separate thrust washer are different items. Unresolved or conflicting dimensions remain unavailable instead of being guessed.
Source-listed bearing records
3 records
Shop dimensions are inches, including rows for metric engines. These are standard-size source dimensions, not permission to use a listed oil clearance in a different engine.
Connecting-rod big endConnecting Rod AL-3
Application: FORD · block 2
1.3L 1295 CC SOHC 8V L4 Mazda VIN Code: 'H' (1989-1997), 'K' (1988-1989)
Catalogue conditions / continuation notesBearing Set 5mm,1.00mm
- Standard shaft diameter
- 1.5724–1.5730 in
- Vertical oil clearance
- 0.0010–0.0031 in
- Maximum wall at crown
- 0.0596 in
- Bearing OD or housing bore
- 1.6929–1.6935 in
- Maximum axial length
- 0.6740 in
MAHLE/Clevite EB-20-26 · printed page 359 · reference ac9d98c8. No installation torque or machining approval is implied.
Connecting Rod AL-3
Application: MAZDA · block 1
1.3L 1272 CC SOHC 8V L4 Mazda (1976-1978) 1.4L 1415 CC SOHC 8V L4 Mazda (1979-1980) 1.5L 1490 CC SOHC 8V L4 Mazda (1981-1985)
Catalogue conditions / continuation notesBearing Set 5mm,1.00mm
- Standard shaft diameter
- 1.5724–1.5730 in
- Vertical oil clearance
- 0.0010–0.0031 in
- Maximum wall at crown
- 0.0596 in
- Bearing OD or housing bore
- 1.6929–1.6935 in
- Maximum axial length
- 0.6740 in
MAHLE/Clevite EB-20-26 · printed page 861 · reference 044e7919. No installation torque or machining approval is implied.
Connecting Rod AL-3
Application: MAZDA · block 2
1.5L 1489 CC DOHC 16V L4 Mazda (1995-1998)
Catalogue conditions / continuation notesBearing Set 5mm,1.00mm
- Standard shaft diameter
- 1.5724–1.5730 in
- Vertical oil clearance
- 0.0010–0.0031 in
- Maximum wall at crown
- 0.0596 in
- Bearing OD or housing bore
- 1.6929–1.6935 in
- Maximum axial length
- 0.6740 in
MAHLE/Clevite EB-20-26 · printed page 861 · reference c4a2b767. No installation torque or machining approval is implied.
Use the reference correctly
Identify before comparing
Keep engine code, production year, VIN qualifiers, bearing position and the existing shell markings. A 350, 1.8 or 4.6 label is not a unique engine identification.
Measure the actual assembly
Standard journal dimensions do not describe a worn or reground shaft. Verify the installed housing, required repair size and oil clearance with the engine-specific procedure.
Keep unresolved values unresolved
Empty dimensional fields can reflect set-only entries, incomplete source rows or conflicts. They do not mean zero clearance, and another entry's values are not a substitute.
Reference basis and limitations
This independent lookup reorganises factual entries from the 2026 MAHLE/Clevite engine-bearing catalogue. The original source fingerprint, extraction record and application block are retained privately. The catalogue source is not a guarantee of current stock, current vehicle approval or complete coverage of every engine. BearingScope does not sell these parts or provide a rebuild service.