99,016 bearing records · search, filter and compare

info@bearingscope.com
Find · understand · compare

NU 2212 bearing dimensions & suffix variants

Look up recorded dimensions for designations beginning with NU 2212. The table retains complete manufacturer designations so special suffixes and different dimensional variants remain visible.

On this page5 sections

Find by measured dimensions

Enter bore d, outside diameter D and width B. Use decimals or inch fractions such as 1/2 or 1 1/4.

For tapered assemblies use total width T; for units or flanged bearings also check the mounting drawing.

Exact model evidence

NU 2212 dimensions and recorded technical data

The recorded NU 2212 base designation measures 60×110×28 mm (inside diameter d × outside diameter D × width B). This answer uses unsuffixed records from KOYO. It does not assign the same dimensions or operating ratings to every suffix.

The numeric series boundary is preserved: a longer number is not included merely because its first digits match. 18 recorded variants are listed. A dash means the value is missing, not zero.

Brand / full designationNamed dimensions (mm / in)Dynamic C (kN)Static C0 (kN)Reference speed (rpm)Limiting speed (rpm)Mass (kg / g)
KOYONU2212Cylindrical roller bearing
Bore diameter (d)
60 mm
2.362205 in
Outside diameter (D)
110 mm
4.330709 in
Width (B)
28 mm
1.102362 in
120 kN123 kN—5200 rpmLimiting Speeds(Grease Lub.): 5200 min-1Limiting Speeds(Oil Lub.): 7000 min-11.07 kg1070 g
SKFNU 2212 ECJSingle row cylindrical roller bearing, NU design
Bore diameter (d)
60 mm
2.362205 in
Outside diameter (D)
110 mm
4.330709 in
Width (B)
28 mm
1.102362 in
146 kN153 kN6700 rpm7500 rpm1.07 kg1070 g
SKFNU 2212 ECJ/C3Single row cylindrical roller bearing, NU design
Recorded bore (d)
60 mm
2.362205 in
Recorded outside dimension (D)
110 mm
4.330709 in
Catalogue width (symbol unverified)
28 mm
1.102362 in
146 kN153 kN6700 rpm7500 rpm1.1 kg1100 g
SKFNU 2212 ECMSingle row cylindrical roller bearing, NU design
Bore diameter (d)
60 mm
2.362205 in
Outside diameter (D)
110 mm
4.330709 in
Width (B)
28 mm
1.102362 in
146 kN153 kN6700 rpm7500 rpm1.21 kg1210 g
SKFNU 2212 ECMLSingle row cylindrical roller bearing, NU design
Bore diameter (d)
60 mm
2.362205 in
Outside diameter (D)
110 mm
4.330709 in
Width (B)
28 mm
1.102362 in
146 kN153 kN6700 rpm11000 rpm1.18 kg1180 g
SKFNU 2212 ECML/C3Single row cylindrical roller bearing, NU design
Recorded bore (d)
60 mm
2.362205 in
Recorded outside dimension (D)
110 mm
4.330709 in
Catalogue width (symbol unverified)
28 mm
1.102362 in
146 kN153 kN6700 rpm11000 rpm1.18 kg1180 g
SKFNU 2212 ECPSingle row cylindrical roller bearing, NU design
Bore diameter (d)
60 mm
2.362205 in
Outside diameter (D)
110 mm
4.330709 in
Width (B)
28 mm
1.102362 in
146 kN153 kN6700 rpm7500 rpm1.05 kg1050 g
SKFNU 2212 ECP/C3Single row cylindrical roller bearing, NU design
Recorded bore (d)
60 mm
2.362205 in
Recorded outside dimension (D)
110 mm
4.330709 in
Catalogue width (symbol unverified)
28 mm
1.102362 in
146 kN153 kN6700 rpm7500 rpm1.05 kg1050 g
SKFNU 2212 ECPHSingle row cylindrical roller bearing, NU design
Bore diameter (d)
60 mm
2.362205 in
Outside diameter (D)
110 mm
4.330709 in
Width (B)
28 mm
1.102362 in
146 kN153 kN6700 rpm7500 rpm1.05 kg1050 g
FAGNU2212-E-XL-M1Cylindrical roller bearing
Bore diameter (d)
60 mm
2.362205 in
Outside diameter (D)
110 mm
4.330709 in
Width (B)
28 mm
1.102362 in
152 kN153 kN4300 rpm11500 rpm1.19 kg1190 g
FAGNU2212-E-XL-M1-C3Cylindrical roller bearing
Bore diameter (d)
60 mm
2.362205 in
Outside diameter (D)
110 mm
4.330709 in
Width (B)
28 mm
1.102362 in
152 kN153 kN4300 rpm11500 rpm1.19 kg1190 g
FAGNU2212-E-XL-M1-C4Cylindrical roller bearing
Bore diameter (d)
60 mm
2.362205 in
Outside diameter (D)
110 mm
4.330709 in
Width (B)
28 mm
1.102362 in
152 kN153 kN4300 rpm11500 rpm1.19 kg1190 g
FAGNU2212-E-XL-M1-F1-J20AA-C4Cylindrical roller bearing
Bore diameter (d)
60 mm
2.362205 in
Outside diameter (D)
110 mm
4.330709 in
Width (B)
28 mm
1.102362 in
152 kN153 kN4300 rpm11500 rpm1.145 kg1145 g
FAGNU2212-E-XL-TVP2Cylindrical roller bearing
Bore diameter (d)
60 mm
2.362205 in
Outside diameter (D)
110 mm
4.330709 in
Width (B)
28 mm
1.102362 in
152 kN153 kN4300 rpm8900 rpm1.06 kg1060 g
FAGNU2212-E-XL-TVP2-C3Cylindrical roller bearing
Bore diameter (d)
60 mm
2.362205 in
Outside diameter (D)
110 mm
4.330709 in
Width (B)
28 mm
1.102362 in
152 kN153 kN4300 rpm8900 rpm1.06 kg1060 g
FAGNU2212-E-XL-TVP2-CNLCylindrical roller bearing
Bore diameter (d)
60 mm
2.362205 in
Outside diameter (D)
110 mm
4.330709 in
Width (B)
28 mm
1.102362 in
152 kN153 kN4300 rpm8900 rpm1.07 kg1070 g
NSKNU2212ETCylindrical roller bearing
Bore diameter (d)
60 mm
2.362205 in
Outside diameter (D)
110 mm
4.330709 in
Bearing width (B)
28 mm
1.102362 in
161 kN157 kN———
KOYONU2212RCylindrical roller bearing
Bore diameter (d)
60 mm
2.362205 in
Outside diameter (D)
110 mm
4.330709 in
Width (B)
28 mm
1.102362 in
164 kN157 kN—5200 rpmLimiting Speeds(Grease Lub.): 5200 min-1Limiting Speeds(Oil Lub.): 6900 min-11.09 kg1090 g
Compare recorded seals, clearance, precision and materials

Manufacturer wording is retained. A missing property is not inferred from another brand or a similar suffix.

Brand / designationClosureOriginal precisionClearanceCageMaterialLubricant
KOYO NU2212Not recordedNot recordedNot recordedNot recordedNot recordedNot recorded
SKF NU 2212 ECJWithoutNot recordedCNSheet metalNot recordedNone
SKF NU 2212 ECJ/C3WithoutNot recordedC3Sheet metalNot recordedNone
SKF NU 2212 ECMWithoutNot recordedCNMachined brassNot recordedNone
SKF NU 2212 ECMLWithoutNot recordedCNMachined brassNot recordedNone
SKF NU 2212 ECML/C3WithoutNot recordedC3Machined brassNot recordedNone
SKF NU 2212 ECPWithoutNot recordedCNNon-metallicNot recordedNone
SKF NU 2212 ECP/C3WithoutNot recordedC3Non-metallicNot recordedNone
SKF NU 2212 ECPHWithoutNot recordedCNNon-metallicNot recordedNone
FAG NU2212-E-XL-M1Not recordedPN — Normal (ISO 492:2023)CN (Group N) — Normal internal clearanceM1 — Two Piece Brass Cage Roller GuidedNot recordedNot recorded
FAG NU2212-E-XL-M1-C3Not recordedPN — Normal (ISO 492:2023)C3 (Group 3) — Internal clearance larger than CNM1 — Two Piece Brass Cage Roller GuidedNot recordedNot recorded
FAG NU2212-E-XL-M1-C4Not recordedPN — Normal (ISO 492:2023)C4 (Group 4) — Internal clearance larger than C3M1 — Two Piece Brass Cage Roller GuidedNot recordedNot recorded
FAG NU2212-E-XL-M1-F1-J20AA-C4Not recordedPN — Normal (ISO 492:2023)C4 (Group 4) — Internal clearance larger than C3M1 — Two Piece Brass Cage Roller GuidedNot recordedNot recorded
FAG NU2212-E-XL-TVP2Not recordedPN — Normal (ISO 492:2023)CN (Group N) — Normal internal clearanceTVP2 — Solid Window Cage made from PA66Not recordedNot recorded
FAG NU2212-E-XL-TVP2-C3Not recordedPN — Normal (ISO 492:2023)C3 (Group 3) — Internal clearance larger than CNTVP2 — Solid Window Cage made from PA66Not recordedNot recorded
FAG NU2212-E-XL-TVP2-CNLNot recordedPN — Normal (ISO 492:2023)Not recordedTVP2 — Solid Window Cage made from PA66Not recordedNot recorded
NSK NU2212ETNot recordedNot recordedNot recordedPolyamide 66Not recordedNot recorded
KOYO NU2212RNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded

How to compare these values

  • Use the displayed dimension names and original symbols. Housing length L, height H2 and flange width are not bearing outside diameter D. A catalogue width with an unverified symbol must not be assumed to be inner-ring width B or assembly width T. Open the product record for mounting dimensions and geometry.
  • Inch values are calculated from the recorded millimetres using 25.4 mm per inch, rounded to six decimal places. They do not change a metric bearing into an inch-series bearing. Gram values are converted from the recorded mass in kilograms.
  • C and C0 describe different rating conditions. They are not a single safe working-load limit and cannot replace an application load calculation.
  • Reference and limiting speeds are separate catalogue values. The source grease/oil context is shown where recorded. Lubricant, seals, loads, fit, clearance and cooling affect the usable operating speed.
  • A common base number does not prove equivalent seals, clearance, precision, material or interchangeability. Open the full designation for these fields.
Check load calculations →Estimate rating life →Decode the complete marking →Check replacement evidence →

Related prefix matches — other model numbers may appear

These discovery results can contain a longer number or a different component. They are not specifications for the requested exact model. Open the complete product to inspect its original geometry.

KOYO

NU2212

Cylindrical roller bearing

View full technical record →SKF

NU 2212 ECJ

Single row cylindrical roller bearing, NU design

View full technical record →SKF

NU 2212 ECJ/C3

Single row cylindrical roller bearing, NU design

View full technical record →SKF

NU 2212 ECM

Single row cylindrical roller bearing, NU design

View full technical record →SKF

NU 2212 ECML

Single row cylindrical roller bearing, NU design

View full technical record →SKF

NU 2212 ECML/C3

Single row cylindrical roller bearing, NU design

View full technical record →SKF

NU 2212 ECP

Single row cylindrical roller bearing, NU design

View full technical record →SKF

NU 2212 ECP/C3

Single row cylindrical roller bearing, NU design

View full technical record →SKF

NU 2212 ECPH

Single row cylindrical roller bearing, NU design

View full technical record →NSK

NU2212ET

Cylindrical roller bearing

View full technical record →FAG

NU2212-E-XL-M1

Cylindrical roller bearing

View full technical record →FAG

NU2212-E-XL-M1-C3

Cylindrical roller bearing

View full technical record →
Filter all 18 prefix results →

Check the drawing before substituting

Nominal dimensions are not shaft-fit tolerances. Different variants can add grooves, flanges, wider rings or assembly components. When the table has different dimensions, the complete designation—not the shared prefix—controls.

Measurement guide →Cross-reference checks →

Reference basis & data limits

Manufacturer terminology is retained in the product records. Technical reference basis: JTEKT Basic Bearing Knowledge (boundary dimensions, tolerance classes and lubrication); NSK Bearing ABCs (lubrication, designations and clearance); NTN technical FAQs (closure codes and component interchange); SKF rolling-bearing selection and maintenance references.

Selection workflows and catalogue grouping are BearingScope editorial aids. Verify the current drawing and application requirements before using a candidate. Missing database information is not converted into an assumed match.

Search the consolidated catalogue

Find, filter and compare bearing model data in one place.

Open model search