99,016 bearing records · search, filter and compare

info@bearingscope.com
Find · understand · compare

NU 219 bearing dimensions & suffix variants

Look up recorded dimensions for designations beginning with NU 219. The table retains complete manufacturer designations so special suffixes and different dimensional variants remain visible.

On this page5 sections

Find by measured dimensions

Enter bore d, outside diameter D and width B. Use decimals or inch fractions such as 1/2 or 1 1/4.

For tapered assemblies use total width T; for units or flanged bearings also check the mounting drawing.

Exact model evidence

NU 219 dimensions and recorded technical data

Use the named dimensions for each complete record below. A generic d×D×B answer is not asserted where the base record is missing, dimension symbols are unverified, or the product uses a different geometry such as a housing or thrust assembly. Suffix records are not substituted for a missing base specification.

The numeric series boundary is preserved: a longer number is not included merely because its first digits match. 25 recorded variants are listed. A dash means the value is missing, not zero.

Brand / full designationNamed dimensions (mm / in)Dynamic C (kN)Static C0 (kN)Reference speed (rpm)Limiting speed (rpm)Mass (kg / g)
SKFNU 219 ECJSingle row cylindrical roller bearing, NU design
Bore diameter (d)
95 mm
3.740157 in
Outside diameter (D)
170 mm
6.692913 in
Width (B)
32 mm
1.259843 in
255 kN265 kN4300 rpm4800 rpm2.81 kg2810 g
SKFNU 219 ECJ/C3Single row cylindrical roller bearing, NU design
Recorded bore (d)
95 mm
3.740157 in
Recorded outside dimension (D)
170 mm
6.692913 in
Catalogue width (symbol unverified)
32 mm
1.259843 in
255 kN265 kN4300 rpm4800 rpm2.81 kg2810 g
SKFNU 219 ECMSingle row cylindrical roller bearing, NU design
Bore diameter (d)
95 mm
3.740157 in
Outside diameter (D)
170 mm
6.692913 in
Width (B)
32 mm
1.259843 in
255 kN265 kN4300 rpm4800 rpm3.22 kg3220 g
SKFNU 219 ECM/C3Single row cylindrical roller bearing, NU design
Recorded bore (d)
95 mm
3.740157 in
Recorded outside dimension (D)
170 mm
6.692913 in
Catalogue width (symbol unverified)
32 mm
1.259843 in
255 kN265 kN4300 rpm4800 rpm3.22 kg3220 g
SKFNU 219 ECM/C4VA305Single row cylindrical roller bearing, NU design
Recorded bore (d)
95 mm
3.740157 in
Recorded outside dimension (D)
170 mm
6.692913 in
Catalogue width (symbol unverified)
32 mm
1.259843 in
255 kN265 kN4300 rpm4800 rpm3.22 kg3220 g
SKFNU 219 ECMLSingle row cylindrical roller bearing, NU design
Bore diameter (d)
95 mm
3.740157 in
Outside diameter (D)
170 mm
6.692913 in
Width (B)
32 mm
1.259843 in
255 kN265 kN4300 rpm7000 rpm3.1 kg3100 g
SKFNU 219 ECML/C4Single row cylindrical roller bearing, NU design
Recorded bore (d)
95 mm
3.740157 in
Recorded outside dimension (D)
170 mm
6.692913 in
Catalogue width (symbol unverified)
32 mm
1.259843 in
255 kN265 kN4300 rpm7000 rpm3.1 kg3100 g
SKFNU 219 ECM/P64VA3091INSOCOAT single row cylindrical roller bearing, NU design
Recorded bore (d)
95 mm
3.740157 in
Recorded outside dimension (D)
170 mm
6.692913 in
Catalogue width (symbol unverified)
32 mm
1.259843 in
255 kN265 kN——3.32 kg3320 g
SKFNU 219 ECPSingle row cylindrical roller bearing, NU design
Bore diameter (d)
95 mm
3.740157 in
Outside diameter (D)
170 mm
6.692913 in
Width (B)
32 mm
1.259843 in
255 kN265 kN4300 rpm4800 rpm2.78 kg2780 g
SKFNU 219 ECP/C3Single row cylindrical roller bearing, NU design
Recorded bore (d)
95 mm
3.740157 in
Recorded outside dimension (D)
170 mm
6.692913 in
Catalogue width (symbol unverified)
32 mm
1.259843 in
255 kN265 kN4300 rpm4800 rpm2.78 kg2780 g
FAGNU219-E-XL-M1Cylindrical roller bearing
Bore diameter (d)
95 mm
3.740157 in
Outside diameter (D)
170 mm
6.692913 in
Width (B)
32 mm
1.259843 in
260 kN265 kN3650 rpm7200 rpm3.14 kg3140 g
FAGNU219-E-XL-M1-C3Cylindrical roller bearing
Bore diameter (d)
95 mm
3.740157 in
Outside diameter (D)
170 mm
6.692913 in
Width (B)
32 mm
1.259843 in
260 kN265 kN3650 rpm7200 rpm2.53 kg2530 g
FAGNU219-E-XL-M1-C4Cylindrical roller bearing
Bore diameter (d)
95 mm
3.740157 in
Outside diameter (D)
170 mm
6.692913 in
Width (B)
32 mm
1.259843 in
260 kN265 kN3650 rpm7200 rpm3.14 kg3140 g
FAGNU219-E-XL-TVP2Cylindrical roller bearing
Bore diameter (d)
95 mm
3.740157 in
Outside diameter (D)
170 mm
6.692913 in
Width (B)
32 mm
1.259843 in
260 kN265 kN3650 rpm5600 rpm2.774 kg2774 g
FAGNU219-E-XL-TVP2-C3Cylindrical roller bearing
Bore diameter (d)
95 mm
3.740157 in
Outside diameter (D)
170 mm
6.692913 in
Width (B)
32 mm
1.259843 in
260 kN265 kN3650 rpm5600 rpm2.774 kg2774 g
FAGNU219-E-XL-TVP2-CNLCylindrical roller bearing
Bore diameter (d)
95 mm
3.740157 in
Outside diameter (D)
170 mm
6.692913 in
Width (B)
32 mm
1.259843 in
260 kN265 kN3650 rpm5600 rpm2.774 kg2774 g
FAGNU219-E-XL-TVP2-F1-C3Cylindrical roller bearing
Bore diameter (d)
95 mm
3.740157 in
Outside diameter (D)
170 mm
6.692913 in
Width (B)
32 mm
1.259843 in
260 kN265 kN3650 rpm5600 rpm2.778 kg2778 g
TIMKENNU219EJCylindrical roller bearing
Recorded bore (d)
95 mm
3.740157 in
Recorded outside dimension (D)
170 mm
6.692913 in
Catalogue width (symbol unverified)
32 mm
1.259843 in
248 kN271 kN——2.77 kg2770 g
TIMKENNU219EJC3Cylindrical roller bearing
Recorded bore (d)
95 mm
3.740157 in
Recorded outside dimension (D)
170 mm
6.692913 in
Catalogue width (symbol unverified)
32 mm
1.259843 in
248 kN271 kN——2.77 kg2770 g
TIMKENNU219EJC4Cylindrical roller bearing
Recorded bore (d)
95 mm
3.740157 in
Recorded outside dimension (D)
170 mm
6.692913 in
Catalogue width (symbol unverified)
32 mm
1.259843 in
248 kN271 kN——2.77 kg2770 g
TIMKENNU219EMACylindrical roller bearing
Recorded bore (d)
95 mm
3.740157 in
Recorded outside dimension (D)
170 mm
6.692913 in
Catalogue width (symbol unverified)
32 mm
1.259843 in
248 kN271 kN——3.1 kg3100 g
TIMKENNU219EMAC3Cylindrical roller bearing
Recorded bore (d)
95 mm
3.740157 in
Recorded outside dimension (D)
170 mm
6.692913 in
Catalogue width (symbol unverified)
32 mm
1.259843 in
248 kN271 kN——3.1 kg3100 g
TIMKENNU219EMAC4Cylindrical roller bearing
Recorded bore (d)
95 mm
3.740157 in
Recorded outside dimension (D)
170 mm
6.692913 in
Catalogue width (symbol unverified)
32 mm
1.259843 in
248 kN271 kN——3.1 kg3100 g
NSKNU219EMCylindrical roller bearing
Bore diameter (d)
95 mm
3.740157 in
Outside diameter (D)
170 mm
6.692913 in
Bearing width (B)
32 mm
1.259843 in
271 kN265 kN———
KOYONU219RCylindrical roller bearing
Bore diameter (d)
95 mm
3.740157 in
Outside diameter (D)
170 mm
6.692913 in
Width (B)
32 mm
1.259843 in
275 kN265 kN—3700 rpmLimiting Speeds(Grease Lub.): 3700 min-1Limiting Speeds(Oil Lub.): 4400 min-12.92 kg2920 g
Compare recorded seals, clearance, precision and materials

Manufacturer wording is retained. A missing property is not inferred from another brand or a similar suffix.

Brand / designationClosureOriginal precisionClearanceCageMaterialLubricant
SKF NU 219 ECJWithoutNot recordedCNSheet metalNot recordedNone
SKF NU 219 ECJ/C3WithoutNot recordedC3Sheet metalNot recordedNone
SKF NU 219 ECMWithoutNot recordedCNMachined brassNot recordedNone
SKF NU 219 ECM/C3WithoutNot recordedC3Machined brassNot recordedNone
SKF NU 219 ECM/C4VA305WithoutNot recordedC4Machined brassNot recordedNone
SKF NU 219 ECMLWithoutNot recordedCNMachined brassNot recordedNone
SKF NU 219 ECML/C4WithoutNot recordedC4Machined brassNot recordedNone
SKF NU 219 ECM/P64VA3091WithoutNot recordedC4Machined brassBearing steelNone
SKF NU 219 ECPWithoutNot recordedCNNon-metallicNot recordedNone
SKF NU 219 ECP/C3WithoutNot recordedC3Non-metallicNot recordedNone
FAG NU219-E-XL-M1Not recordedPN — Normal (ISO 492:2023)CN (Group N) — Normal internal clearanceM1 — Two Piece Brass Cage Roller GuidedNot recordedNot recorded
FAG NU219-E-XL-M1-C3Not recordedPN — Normal (ISO 492:2023)C3 (Group 3) — Internal clearance larger than CNM1 — Two Piece Brass Cage Roller GuidedNot recordedNot recorded
FAG NU219-E-XL-M1-C4Not recordedPN — Normal (ISO 492:2023)C4 (Group 4) — Internal clearance larger than C3M1 — Two Piece Brass Cage Roller GuidedNot recordedNot recorded
FAG NU219-E-XL-TVP2Not recordedPN — Normal (ISO 492:2023)CN (Group N) — Normal internal clearanceTVP2 — Solid Window Cage made from PA66Not recordedNot recorded
FAG NU219-E-XL-TVP2-C3Not recordedPN — Normal (ISO 492:2023)C3 (Group 3) — Internal clearance larger than CNTVP2 — Solid Window Cage made from PA66Not recordedNot recorded
FAG NU219-E-XL-TVP2-CNLNot recordedPN — Normal (ISO 492:2023)Not recordedTVP2 — Solid Window Cage made from PA66Not recordedNot recorded
FAG NU219-E-XL-TVP2-F1-C3Not recordedPN — Normal (ISO 492:2023)C3 (Group 3) — Internal clearance larger than CNTVP2 — Solid Window Cage made from PA66Not recordedNot recorded
TIMKEN NU219EJOpenNot recordedNot recordedWindow Steel cageNot recordedNot recorded
TIMKEN NU219EJC3OpenNot recordedNot recordedWindow Steel cageNot recordedNot recorded
TIMKEN NU219EJC4OpenNot recordedNot recordedWindow Steel cageNot recordedNot recorded
TIMKEN NU219EMAOpenNot recordedNot recordedWindow Brass cageNot recordedNot recorded
TIMKEN NU219EMAC3OpenNot recordedNot recordedWindow Brass cageNot recordedNot recorded
TIMKEN NU219EMAC4OpenNot recordedNot recordedWindow Brass cageNot recordedNot recorded
NSK NU219EMNot recordedNot recordedNot recordedMachined brassNot recordedNot recorded
KOYO NU219RNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded

How to compare these values

  • Use the displayed dimension names and original symbols. Housing length L, height H2 and flange width are not bearing outside diameter D. A catalogue width with an unverified symbol must not be assumed to be inner-ring width B or assembly width T. Open the product record for mounting dimensions and geometry.
  • Inch values are calculated from the recorded millimetres using 25.4 mm per inch, rounded to six decimal places. They do not change a metric bearing into an inch-series bearing. Gram values are converted from the recorded mass in kilograms.
  • C and C0 describe different rating conditions. They are not a single safe working-load limit and cannot replace an application load calculation.
  • Reference and limiting speeds are separate catalogue values. The source grease/oil context is shown where recorded. Lubricant, seals, loads, fit, clearance and cooling affect the usable operating speed.
  • A common base number does not prove equivalent seals, clearance, precision, material or interchangeability. Open the full designation for these fields.
Check load calculations →Estimate rating life →Decode the complete marking →Check replacement evidence →

Related prefix matches — other model numbers may appear

These discovery results can contain a longer number or a different component. They are not specifications for the requested exact model. Open the complete product to inspect its original geometry.

SKF

NU 219 ECJ

Single row cylindrical roller bearing, NU design

View full technical record →SKF

NU 219 ECJ/C3

Single row cylindrical roller bearing, NU design

View full technical record →SKF

NU 219 ECM

Single row cylindrical roller bearing, NU design

View full technical record →SKF

NU 219 ECM/C3

Single row cylindrical roller bearing, NU design

View full technical record →SKF

NU 219 ECM/C4VA305

Single row cylindrical roller bearing, NU design

View full technical record →SKF

NU 219 ECML

Single row cylindrical roller bearing, NU design

View full technical record →SKF

NU 219 ECML/C4

Single row cylindrical roller bearing, NU design

View full technical record →SKF

NU 219 ECM/P64VA3091

INSOCOAT single row cylindrical roller bearing, NU design

View full technical record →SKF

NU 219 ECP

Single row cylindrical roller bearing, NU design

View full technical record →SKF

NU 219 ECP/C3

Single row cylindrical roller bearing, NU design

View full technical record →TIMKEN

NU219EJ

Cylindrical roller bearing

View full technical record →TIMKEN

NU219EJC3

Cylindrical roller bearing

View full technical record →
Filter all 25 prefix results →

Check the drawing before substituting

Nominal dimensions are not shaft-fit tolerances. Different variants can add grooves, flanges, wider rings or assembly components. When the table has different dimensions, the complete designation—not the shared prefix—controls.

Measurement guide →Cross-reference checks →

Reference basis & data limits

Manufacturer terminology is retained in the product records. Technical reference basis: JTEKT Basic Bearing Knowledge (boundary dimensions, tolerance classes and lubrication); NSK Bearing ABCs (lubrication, designations and clearance); NTN technical FAQs (closure codes and component interchange); SKF rolling-bearing selection and maintenance references.

Selection workflows and catalogue grouping are BearingScope editorial aids. Verify the current drawing and application requirements before using a candidate. Missing database information is not converted into an assumed match.

Search the consolidated catalogue

Find, filter and compare bearing model data in one place.

Open model search