99,016 bearing records · search, filter and compare

info@bearingscope.com
Find · understand · compare

NU 217 bearing dimensions & suffix variants

Look up recorded dimensions for designations beginning with NU 217. The table retains complete manufacturer designations so special suffixes and different dimensional variants remain visible.

On this page5 sections

Find by measured dimensions

Enter bore d, outside diameter D and width B. Use decimals or inch fractions such as 1/2 or 1 1/4.

For tapered assemblies use total width T; for units or flanged bearings also check the mounting drawing.

Exact model evidence

NU 217 dimensions and recorded technical data

Use the named dimensions for each complete record below. A generic d×D×B answer is not asserted where the base record is missing, dimension symbols are unverified, or the product uses a different geometry such as a housing or thrust assembly. Suffix records are not substituted for a missing base specification.

The numeric series boundary is preserved: a longer number is not included merely because its first digits match. 22 recorded variants are listed. A dash means the value is missing, not zero.

Brand / full designationNamed dimensions (mm / in)Dynamic C (kN)Static C0 (kN)Reference speed (rpm)Limiting speed (rpm)Mass (kg / g)
SKFNU 217 ECJSingle row cylindrical roller bearing, NU design
Bore diameter (d)
85 mm
3.346457 in
Outside diameter (D)
150 mm
5.905512 in
Width (B)
28 mm
1.102362 in
190 kN200 kN4800 rpm5300 rpm1.85 kg1850 g
SKFNU 217 ECJ/C3Single row cylindrical roller bearing, NU design
Recorded bore (d)
85 mm
3.346457 in
Recorded outside dimension (D)
150 mm
5.905512 in
Catalogue width (symbol unverified)
28 mm
1.102362 in
190 kN200 kN4800 rpm5300 rpm1.85 kg1850 g
SKFNU 217 ECMSingle row cylindrical roller bearing, NU design
Bore diameter (d)
85 mm
3.346457 in
Outside diameter (D)
150 mm
5.905512 in
Width (B)
28 mm
1.102362 in
190 kN200 kN4800 rpm5300 rpm2.16 kg2160 g
SKFNU 217 ECM/C3Single row cylindrical roller bearing, NU design
Recorded bore (d)
85 mm
3.346457 in
Recorded outside dimension (D)
150 mm
5.905512 in
Catalogue width (symbol unverified)
28 mm
1.102362 in
190 kN200 kN4800 rpm5300 rpm2.16 kg2160 g
SKFNU 217 ECM/C3VL0241INSOCOAT single row cylindrical roller bearing, NU design
Bore diameter (d)
85 mm
3.346457 in
Outside diameter (D)
150 mm
5.905512 in
Width (B)
28 mm
1.102362 in
190 kN200 kN4800 rpm5300 rpm2.16 kg2160 g
SKFNU 217 ECM/C4VA301Single row cylindrical roller bearing, NU design
Recorded bore (d)
85 mm
3.346457 in
Recorded outside dimension (D)
150 mm
5.905512 in
Catalogue width (symbol unverified)
28 mm
1.102362 in
190 kN200 kN4800 rpm5300 rpm2.16 kg2160 g
SKFNU 217 ECMLSingle row cylindrical roller bearing, NU design
Bore diameter (d)
85 mm
3.346457 in
Outside diameter (D)
150 mm
5.905512 in
Width (B)
28 mm
1.102362 in
190 kN200 kN4800 rpm8000 rpm2.09 kg2090 g
SKFNU 217 ECML/C4HSingle row cylindrical roller bearing, NU design
Recorded bore (d)
85 mm
3.346457 in
Recorded outside dimension (D)
150 mm
5.905512 in
Catalogue width (symbol unverified)
28 mm
1.102362 in
190 kN200 kN4800 rpm8000 rpm2.08 kg2080 g
SKFNU 217 ECPSingle row cylindrical roller bearing, NU design
Bore diameter (d)
85 mm
3.346457 in
Outside diameter (D)
150 mm
5.905512 in
Width (B)
28 mm
1.102362 in
190 kN200 kN4800 rpm5300 rpm1.89 kg1890 g
SKFNU 217 ECP/C3Single row cylindrical roller bearing, NU design
Recorded bore (d)
85 mm
3.346457 in
Recorded outside dimension (D)
150 mm
5.905512 in
Catalogue width (symbol unverified)
28 mm
1.102362 in
190 kN200 kN4800 rpm5300 rpm1.89 kg1890 g
SKFNU 217 ECP/C3VA3096INSOCOAT single row cylindrical roller bearing, NU design
Recorded bore (d)
85 mm
3.346457 in
Recorded outside dimension (D)
150 mm
5.905512 in
Catalogue width (symbol unverified)
28 mm
1.102362 in
190 kN200 kN4800 rpm5300 rpm1.89 kg1890 g
FAGNU217-E-XL-M1Cylindrical roller bearing
Bore diameter (d)
85 mm
3.346457 in
Outside diameter (D)
150 mm
5.905512 in
Width (B)
28 mm
1.102362 in
194 kN194 kN4000 rpm8300 rpm2.082 kg2082 g
FAGNU217-E-XL-TVP2Cylindrical roller bearing
Bore diameter (d)
85 mm
3.346457 in
Outside diameter (D)
150 mm
5.905512 in
Width (B)
28 mm
1.102362 in
194 kN194 kN4000 rpm6400 rpm2.091 kg2091 g
FAGNU217-E-XL-TVP2-C3Cylindrical roller bearing
Bore diameter (d)
85 mm
3.346457 in
Outside diameter (D)
150 mm
5.905512 in
Width (B)
28 mm
1.102362 in
194 kN194 kN4000 rpm6400 rpm1.87 kg1870 g
FAGNU217-E-XL-TVP2-F1-C3Cylindrical roller bearing
Bore diameter (d)
85 mm
3.346457 in
Outside diameter (D)
150 mm
5.905512 in
Width (B)
28 mm
1.102362 in
194 kN194 kN4000 rpm6400 rpm1.87 kg1870 g
FAGNU217-E-XL-TVP2-F1-J20AA-C3Cylindrical roller bearing
Bore diameter (d)
85 mm
3.346457 in
Outside diameter (D)
150 mm
5.905512 in
Width (B)
28 mm
1.102362 in
194 kN194 kN4000 rpm6400 rpm1.815 kg1815 g
TIMKENNU217EJCylindrical roller bearing
Recorded bore (d)
85 mm
3.346457 in
Recorded outside dimension (D)
150 mm
5.905512 in
Catalogue width (symbol unverified)
28 mm
1.102362 in
187 kN201 kN——1.67 kg1670 g
TIMKENNU217EJC3Cylindrical roller bearing
Recorded bore (d)
85 mm
3.346457 in
Recorded outside dimension (D)
150 mm
5.905512 in
Catalogue width (symbol unverified)
28 mm
1.102362 in
187 kN201 kN——1.67 kg1670 g
TIMKENNU217EMACylindrical roller bearing
Recorded bore (d)
85 mm
3.346457 in
Recorded outside dimension (D)
150 mm
5.905512 in
Catalogue width (symbol unverified)
28 mm
1.102362 in
201 kN201 kN——2.1 kg2100 g
TIMKENNU217EMAC3Cylindrical roller bearing
Recorded bore (d)
85 mm
3.346457 in
Recorded outside dimension (D)
150 mm
5.905512 in
Catalogue width (symbol unverified)
28 mm
1.102362 in
201 kN201 kN——2.1 kg2100 g
NSKNU217EMCylindrical roller bearing
Bore diameter (d)
85 mm
3.346457 in
Outside diameter (D)
150 mm
5.905512 in
Bearing width (B)
28 mm
1.102362 in
206 kN199 kN———
KOYONU217RCylindrical roller bearing
Bore diameter (d)
85 mm
3.346457 in
Outside diameter (D)
150 mm
5.905512 in
Width (B)
28 mm
1.102362 in
209 kN199 kN—4200 rpmLimiting Speeds(Grease Lub.): 4200 min-1Limiting Speeds(Oil Lub.): 5000 min-11.94 kg1940 g
Compare recorded seals, clearance, precision and materials

Manufacturer wording is retained. A missing property is not inferred from another brand or a similar suffix.

Brand / designationClosureOriginal precisionClearanceCageMaterialLubricant
SKF NU 217 ECJWithoutNot recordedCNSheet metalNot recordedNone
SKF NU 217 ECJ/C3WithoutNot recordedC3Sheet metalNot recordedNone
SKF NU 217 ECMWithoutNot recordedCNMachined brassNot recordedNone
SKF NU 217 ECM/C3WithoutNot recordedC3Machined brassNot recordedNone
SKF NU 217 ECM/C3VL0241WithoutNot recordedC3Machined brassBearing steelNone
SKF NU 217 ECM/C4VA301WithoutNot recordedC4Machined brassNot recordedNone
SKF NU 217 ECMLWithoutNot recordedCNMachined brassNot recordedNone
SKF NU 217 ECML/C4HWithoutNot recordedC4HMachined brassNot recordedNone
SKF NU 217 ECPWithoutNot recordedCNNon-metallicNot recordedNone
SKF NU 217 ECP/C3WithoutNot recordedC3Non-metallicNot recordedNone
SKF NU 217 ECP/C3VA3096WithoutNot recordedC3Non-metallicBearing steelNone
FAG NU217-E-XL-M1Not recordedPN — Normal (ISO 492:2023)CN (Group N) — Normal internal clearanceM1 — Two Piece Brass Cage Roller GuidedNot recordedNot recorded
FAG NU217-E-XL-TVP2Not recordedPN — Normal (ISO 492:2023)CN (Group N) — Normal internal clearanceTVP2 — Solid Window Cage made from PA66Not recordedNot recorded
FAG NU217-E-XL-TVP2-C3Not recordedPN — Normal (ISO 492:2023)C3 (Group 3) — Internal clearance larger than CNTVP2 — Solid Window Cage made from PA66Not recordedNot recorded
FAG NU217-E-XL-TVP2-F1-C3Not recordedPN — Normal (ISO 492:2023)C3 (Group 3) — Internal clearance larger than CNTVP2 — Solid Window Cage made from PA66Not recordedNot recorded
FAG NU217-E-XL-TVP2-F1-J20AA-C3Not recordedPN — Normal (ISO 492:2023)C3 (Group 3) — Internal clearance larger than CNTVP2 — Solid Window Cage made from PA66Not recordedNot recorded
TIMKEN NU217EJOpenNot recordedNot recordedWindow Steel cageNot recordedNot recorded
TIMKEN NU217EJC3OpenNot recordedNot recordedWindow Steel cageNot recordedNot recorded
TIMKEN NU217EMAOpenNot recordedNot recordedWindow Brass cageNot recordedNot recorded
TIMKEN NU217EMAC3OpenNot recordedNot recordedWindow Brass cageNot recordedNot recorded
NSK NU217EMNot recordedNot recordedNot recordedMachined brassNot recordedNot recorded
KOYO NU217RNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded

How to compare these values

  • Use the displayed dimension names and original symbols. Housing length L, height H2 and flange width are not bearing outside diameter D. A catalogue width with an unverified symbol must not be assumed to be inner-ring width B or assembly width T. Open the product record for mounting dimensions and geometry.
  • Inch values are calculated from the recorded millimetres using 25.4 mm per inch, rounded to six decimal places. They do not change a metric bearing into an inch-series bearing. Gram values are converted from the recorded mass in kilograms.
  • C and C0 describe different rating conditions. They are not a single safe working-load limit and cannot replace an application load calculation.
  • Reference and limiting speeds are separate catalogue values. The source grease/oil context is shown where recorded. Lubricant, seals, loads, fit, clearance and cooling affect the usable operating speed.
  • A common base number does not prove equivalent seals, clearance, precision, material or interchangeability. Open the full designation for these fields.
Check load calculations →Estimate rating life →Decode the complete marking →Check replacement evidence →

Related prefix matches — other model numbers may appear

These discovery results can contain a longer number or a different component. They are not specifications for the requested exact model. Open the complete product to inspect its original geometry.

SKF

NU 217 ECJ

Single row cylindrical roller bearing, NU design

View full technical record →SKF

NU 217 ECJ/C3

Single row cylindrical roller bearing, NU design

View full technical record →SKF

NU 217 ECM

Single row cylindrical roller bearing, NU design

View full technical record →SKF

NU 217 ECM/C3

Single row cylindrical roller bearing, NU design

View full technical record →SKF

NU 217 ECM/C3VL0241

INSOCOAT single row cylindrical roller bearing, NU design

View full technical record →SKF

NU 217 ECM/C4VA301

Single row cylindrical roller bearing, NU design

View full technical record →SKF

NU 217 ECML

Single row cylindrical roller bearing, NU design

View full technical record →SKF

NU 217 ECML/C4H

Single row cylindrical roller bearing, NU design

View full technical record →SKF

NU 217 ECP

Single row cylindrical roller bearing, NU design

View full technical record →SKF

NU 217 ECP/C3

Single row cylindrical roller bearing, NU design

View full technical record →SKF

NU 217 ECP/C3VA3096

INSOCOAT single row cylindrical roller bearing, NU design

View full technical record →TIMKEN

NU217EJ

Cylindrical roller bearing

View full technical record →
Filter all 22 prefix results →

Check the drawing before substituting

Nominal dimensions are not shaft-fit tolerances. Different variants can add grooves, flanges, wider rings or assembly components. When the table has different dimensions, the complete designation—not the shared prefix—controls.

Measurement guide →Cross-reference checks →

Reference basis & data limits

Manufacturer terminology is retained in the product records. Technical reference basis: JTEKT Basic Bearing Knowledge (boundary dimensions, tolerance classes and lubrication); NSK Bearing ABCs (lubrication, designations and clearance); NTN technical FAQs (closure codes and component interchange); SKF rolling-bearing selection and maintenance references.

Selection workflows and catalogue grouping are BearingScope editorial aids. Verify the current drawing and application requirements before using a candidate. Missing database information is not converted into an assumed match.

Search the consolidated catalogue

Find, filter and compare bearing model data in one place.

Open model search