NU 214 bearing dimensions & suffix variants
Look up recorded dimensions for designations beginning with NU 214. The table retains complete manufacturer designations so special suffixes and different dimensional variants remain visible.
On this page5 sections ⌄
Find by measured dimensions
Enter bore d, outside diameter D and width B. Use decimals or inch fractions such as 1/2 or 1 1/4.
NU 214 dimensions and recorded technical data
Use the named dimensions for each complete record below. A generic d×D×B answer is not asserted where the base record is missing, dimension symbols are unverified, or the product uses a different geometry such as a housing or thrust assembly. Suffix records are not substituted for a missing base specification.
The numeric series boundary is preserved: a longer number is not included merely because its first digits match. 19 recorded variants are listed. A dash means the value is missing, not zero.
No recorded variant matches these filters. Clear a filter to see other records; no substitute has been inferred.
| Brand / full designation | Named dimensions (mm / in) | Dynamic C (kN) | Static C0 (kN) | Reference speed (rpm) | Limiting speed (rpm) | Mass (kg / g) |
|---|---|---|---|---|---|---|
| SKFNU 214 ECJSingle row cylindrical roller bearing, NU design |
| 137 kN | 137 kN | 6000 rpm | 6300 rpm | 1.12 kg1120 g |
| SKFNU 214 ECJ/C3Single row cylindrical roller bearing, NU design |
| 137 kN | 137 kN | 6000 rpm | 6300 rpm | 1.13 kg1130 g |
| SKFNU 214 ECMSingle row cylindrical roller bearing, NU design |
| 137 kN | 137 kN | 6000 rpm | 6300 rpm | 1.32 kg1320 g |
| SKFNU 214 ECM/C3Single row cylindrical roller bearing, NU design |
| 137 kN | 137 kN | 6000 rpm | 6300 rpm | 1.32 kg1320 g |
| SKFNU 214 ECM/C4VA301Single row cylindrical roller bearing, NU design |
| 137 kN | 137 kN | 6000 rpm | 6300 rpm | 1.32 kg1320 g |
| SKFNU 214 ECM/C4VA3091INSOCOAT single row cylindrical roller bearing, NU design |
| 137 kN | 137 kN | 6000 rpm | 6300 rpm | 1.35 kg1350 g |
| SKFNU 214 ECM/HC5C4VA301Hybrid ceramic single row cylindrical roller bearing, NU design |
| 119 kN | 137 kN | 5300 rpm | 8000 rpm | 1.08 kg1080 g |
| SKFNU 214 ECMLSingle row cylindrical roller bearing, NU design |
| 137 kN | 137 kN | 6000 rpm | 10000 rpm | 1.26 kg1260 g |
| SKFNU 214 ECML/C4Single row cylindrical roller bearing, NU design |
| 137 kN | 137 kN | 6000 rpm | 10000 rpm | 1.27 kg1270 g |
| SKFNU 214 ECPSingle row cylindrical roller bearing, NU design |
| 137 kN | 137 kN | 6000 rpm | 6300 rpm | 1.14 kg1140 g |
| SKFNU 214 ECP/C3Single row cylindrical roller bearing, NU design |
| 137 kN | 137 kN | 6000 rpm | 6300 rpm | 1.14 kg1140 g |
| SKFNU 214 ECPHSingle row cylindrical roller bearing, NU design |
| 137 kN | 137 kN | 6000 rpm | 6300 rpm | 1.14 kg1140 g |
| FAGNU214-E-XL-M1Cylindrical roller bearing |
| 141 kN | 138 kN | 4650 rpm | 10100 rpm | 1.27 kg1270 g |
| FAGNU214-E-XL-TVP2Cylindrical roller bearing |
| 141 kN | 138 kN | 4650 rpm | 7800 rpm | 1.16 kg1160 g |
| FAGNU214-E-XL-TVP2>ACylindrical roller bearing |
| 141 kN | 138 kN | 4650 rpm | 7800 rpm | 1.14 kg1140 g |
| FAGNU214-E-XL-TVP2-C3Cylindrical roller bearing |
| 141 kN | 138 kN | 4650 rpm | 7800 rpm | 1.15 kg1150 g |
| FAGNU214-E-XL-TVP2-CNLCylindrical roller bearing |
| 141 kN | 138 kN | 4650 rpm | 7800 rpm | 1.14 kg1140 g |
| NSKNU214EMCylindrical roller bearing |
| 146 kN | 137 kN | — | — | — |
| KOYONU214RCylindrical roller bearing |
| 148 kN | 137 kN | — | 5000 rpmLimiting Speeds(Grease Lub.): 5000 min-1Limiting Speeds(Oil Lub.): 6000 min-1 | 1.16 kg1160 g |
Compare recorded seals, clearance, precision and materials
Manufacturer wording is retained. A missing property is not inferred from another brand or a similar suffix.
| Brand / designation | Closure | Original precision | Clearance | Cage | Material | Lubricant |
|---|---|---|---|---|---|---|
| SKF NU 214 ECJ | Without | Not recorded | CN | Sheet metal | Not recorded | None |
| SKF NU 214 ECJ/C3 | Without | Not recorded | C3 | Sheet metal | Not recorded | None |
| SKF NU 214 ECM | Without | Not recorded | CN | Machined brass | Not recorded | None |
| SKF NU 214 ECM/C3 | Without | Not recorded | C3 | Machined brass | Not recorded | None |
| SKF NU 214 ECM/C4VA301 | Without | Not recorded | C4 | Machined brass | Not recorded | None |
| SKF NU 214 ECM/C4VA3091 | Without | Not recorded | C4 | Machined brass | Bearing steel | None |
| SKF NU 214 ECM/HC5C4VA301 | Without | Not recorded | C4 | Machined brass | Hybrid (ceramic rollers) | None |
| SKF NU 214 ECML | Without | Not recorded | CN | Machined brass | Not recorded | None |
| SKF NU 214 ECML/C4 | Without | Not recorded | C4 | Machined brass | Not recorded | None |
| SKF NU 214 ECP | Without | Not recorded | CN | Non-metallic | Not recorded | None |
| SKF NU 214 ECP/C3 | Without | Not recorded | C3 | Non-metallic | Not recorded | None |
| SKF NU 214 ECPH | Without | Not recorded | CN | Non-metallic | Not recorded | None |
| FAG NU214-E-XL-M1 | Not recorded | PN — Normal (ISO 492:2023) | CN (Group N) — Normal internal clearance | M1 — Two Piece Brass Cage Roller Guided | Not recorded | Not recorded |
| FAG NU214-E-XL-TVP2 | Not recorded | PN — Normal (ISO 492:2023) | CN (Group N) — Normal internal clearance | TVP2 — Solid Window Cage made from PA66 | Not recorded | Not recorded |
| FAG NU214-E-XL-TVP2>A | Not recorded | PN — Normal (ISO 492:2023) | CN (Group N) — Normal internal clearance | TVP2 — Solid Window Cage made from PA66 | Not recorded | Not recorded |
| FAG NU214-E-XL-TVP2-C3 | Not recorded | PN — Normal (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | TVP2 — Solid Window Cage made from PA66 | Not recorded | Not recorded |
| FAG NU214-E-XL-TVP2-CNL | Not recorded | PN — Normal (ISO 492:2023) | CN (Group N) — Normal internal clearance | TVP2 — Solid Window Cage made from PA66 | Not recorded | Not recorded |
| NSK NU214EM | Not recorded | Not recorded | Not recorded | Machined brass | Not recorded | Not recorded |
| KOYO NU214R | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
How to compare these values
- Use the displayed dimension names and original symbols. Housing length L, height H2 and flange width are not bearing outside diameter D. A catalogue width with an unverified symbol must not be assumed to be inner-ring width B or assembly width T. Open the product record for mounting dimensions and geometry.
- Inch values are calculated from the recorded millimetres using 25.4 mm per inch, rounded to six decimal places. They do not change a metric bearing into an inch-series bearing. Gram values are converted from the recorded mass in kilograms.
- C and C0 describe different rating conditions. They are not a single safe working-load limit and cannot replace an application load calculation.
- Reference and limiting speeds are separate catalogue values. The source grease/oil context is shown where recorded. Lubricant, seals, loads, fit, clearance and cooling affect the usable operating speed.
- A common base number does not prove equivalent seals, clearance, precision, material or interchangeability. Open the full designation for these fields.
Related prefix matches — other model numbers may appear
These discovery results can contain a longer number or a different component. They are not specifications for the requested exact model. Open the complete product to inspect its original geometry.
NU 214 ECJ
Single row cylindrical roller bearing, NU design
View full technical record →SKFNU 214 ECJ/C3
Single row cylindrical roller bearing, NU design
View full technical record →SKFNU 214 ECM
Single row cylindrical roller bearing, NU design
View full technical record →SKFNU 214 ECM/C3
Single row cylindrical roller bearing, NU design
View full technical record →SKFNU 214 ECM/C4VA301
Single row cylindrical roller bearing, NU design
View full technical record →SKFNU 214 ECM/C4VA3091
INSOCOAT single row cylindrical roller bearing, NU design
View full technical record →SKFNU 214 ECM/HC5C4VA301
Hybrid ceramic single row cylindrical roller bearing, NU design
View full technical record →SKFNU 214 ECML
Single row cylindrical roller bearing, NU design
View full technical record →SKFNU 214 ECML/C4
Single row cylindrical roller bearing, NU design
View full technical record →SKFNU 214 ECP
Single row cylindrical roller bearing, NU design
View full technical record →SKFNU 214 ECP/C3
Single row cylindrical roller bearing, NU design
View full technical record →SKFNU 214 ECPH
Single row cylindrical roller bearing, NU design
View full technical record →Check the drawing before substituting
Nominal dimensions are not shaft-fit tolerances. Different variants can add grooves, flanges, wider rings or assembly components. When the table has different dimensions, the complete designation—not the shared prefix—controls.
Reference basis & data limits
Manufacturer terminology is retained in the product records. Technical reference basis: JTEKT Basic Bearing Knowledge (boundary dimensions, tolerance classes and lubrication); NSK Bearing ABCs (lubrication, designations and clearance); NTN technical FAQs (closure codes and component interchange); SKF rolling-bearing selection and maintenance references.
Selection workflows and catalogue grouping are BearingScope editorial aids. Verify the current drawing and application requirements before using a candidate. Missing database information is not converted into an assumed match.