NU 208 bearing dimensions & suffix variants
Look up recorded dimensions for designations beginning with NU 208. The table retains complete manufacturer designations so special suffixes and different dimensional variants remain visible.
On this page5 sections ⌄
Find by measured dimensions
Enter bore d, outside diameter D and width B. Use decimals or inch fractions such as 1/2 or 1 1/4.
NU 208 dimensions and recorded technical data
Use the named dimensions for each complete record below. A generic d×D×B answer is not asserted where the base record is missing, dimension symbols are unverified, or the product uses a different geometry such as a housing or thrust assembly. Suffix records are not substituted for a missing base specification.
The numeric series boundary is preserved: a longer number is not included merely because its first digits match. 13 recorded variants are listed. A dash means the value is missing, not zero.
No recorded variant matches these filters. Clear a filter to see other records; no substitute has been inferred.
| Brand / full designation | Named dimensions (mm / in) | Dynamic C (kN) | Static C0 (kN) | Reference speed (rpm) | Limiting speed (rpm) | Mass (kg / g) |
|---|---|---|---|---|---|---|
| SKFNU 208 ECJSingle row cylindrical roller bearing, NU design |
| 62 kN | 53 kN | 9500 rpm | 11000 rpm | 0.385 kg385 g |
| SKFNU 208 ECJ/C3Single row cylindrical roller bearing, NU design |
| 62 kN | 53 kN | — | — | 0.376 kg376 g |
| SKFNU 208 ECKP/C3Single row cylindrical roller bearing, NU design, with tapered bore |
| 62 kN | 53 kN | 9500 rpm | 11000 rpm | 0.364 kg364 g |
| SKFNU 208 ECMSingle row cylindrical roller bearing, NU design |
| 62 kN | 53 kN | 9500 rpm | 11000 rpm | 0.443 kg443 g |
| SKFNU 208 ECMLSingle row cylindrical roller bearing, NU design |
| 62 kN | 53 kN | 9500 rpm | 16000 rpm | 0.43 kg430 g |
| SKFNU 208 ECML/C3Single row cylindrical roller bearing, NU design |
| 62 kN | 53 kN | 9500 rpm | 16000 rpm | 0.43 kg430 g |
| SKFNU 208 ECPSingle row cylindrical roller bearing, NU design |
| 62 kN | 53 kN | 9500 rpm | 11000 rpm | 0.367 kg367 g |
| SKFNU 208 ECP/C3Single row cylindrical roller bearing, NU design |
| 62 kN | 53 kN | 9500 rpm | 11000 rpm | 0.367 kg367 g |
| SKFNU 208 ECPHSingle row cylindrical roller bearing, NU design |
| 62 kN | 53 kN | 9500 rpm | 11000 rpm | 0.367 kg367 g |
| FAGNU208-E-XL-M1Cylindrical roller bearing |
| 63 kN | 53 kN | 7500 rpm | 16300 rpm | 0.413 kg413 g |
| FAGNU208-E-XL-TVP2Cylindrical roller bearing |
| 63 kN | 53 kN | 7500 rpm | 12500 rpm | 0.365 kg365 g |
| NSKNU208EWCylindrical roller bearing |
| 68.5 kN | 55.5 kN | — | — | — |
| KOYONU208RCylindrical roller bearing |
| 69.6 kN | 55.4 kN | — | 8300 rpmLimiting Speeds(Grease Lub.): 8300 min-1Limiting Speeds(Oil Lub.): 9900 min-1 | 0.384 kg384 g |
Compare recorded seals, clearance, precision and materials
Manufacturer wording is retained. A missing property is not inferred from another brand or a similar suffix.
| Brand / designation | Closure | Original precision | Clearance | Cage | Material | Lubricant |
|---|---|---|---|---|---|---|
| SKF NU 208 ECJ | Without | Not recorded | CN | Sheet metal | Not recorded | None |
| SKF NU 208 ECJ/C3 | Without | Not recorded | C3 | Sheet metal | Not recorded | None |
| SKF NU 208 ECKP/C3 | Without | Not recorded | C3 | Non-metallic | Not recorded | None |
| SKF NU 208 ECM | Without | Not recorded | CN | Machined brass | Not recorded | None |
| SKF NU 208 ECML | Without | Not recorded | CN | Machined brass | Not recorded | None |
| SKF NU 208 ECML/C3 | Without | Not recorded | C3 | Machined brass | Not recorded | None |
| SKF NU 208 ECP | Without | Not recorded | CN | Non-metallic | Not recorded | None |
| SKF NU 208 ECP/C3 | Without | Not recorded | C3 | Non-metallic | Not recorded | None |
| SKF NU 208 ECPH | Without | Not recorded | CN | Non-metallic | Not recorded | None |
| FAG NU208-E-XL-M1 | Not recorded | PN — Normal (ISO 492:2023) | CN (Group N) — Normal internal clearance | M1 — Two Piece Brass Cage Roller Guided | Not recorded | Not recorded |
| FAG NU208-E-XL-TVP2 | Not recorded | PN — Normal (ISO 492:2023) | CN (Group N) — Normal internal clearance | TVP2 — Solid Window Cage made from PA66 | Not recorded | Not recorded |
| NSK NU208EW | Not recorded | Not recorded | Not recorded | Pressed steel | Not recorded | Not recorded |
| KOYO NU208R | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
How to compare these values
- Use the displayed dimension names and original symbols. Housing length L, height H2 and flange width are not bearing outside diameter D. A catalogue width with an unverified symbol must not be assumed to be inner-ring width B or assembly width T. Open the product record for mounting dimensions and geometry.
- Inch values are calculated from the recorded millimetres using 25.4 mm per inch, rounded to six decimal places. They do not change a metric bearing into an inch-series bearing. Gram values are converted from the recorded mass in kilograms.
- C and C0 describe different rating conditions. They are not a single safe working-load limit and cannot replace an application load calculation.
- Reference and limiting speeds are separate catalogue values. The source grease/oil context is shown where recorded. Lubricant, seals, loads, fit, clearance and cooling affect the usable operating speed.
- A common base number does not prove equivalent seals, clearance, precision, material or interchangeability. Open the full designation for these fields.
Related prefix matches — other model numbers may appear
These discovery results can contain a longer number or a different component. They are not specifications for the requested exact model. Open the complete product to inspect its original geometry.
NU 20/800 ECMA
Single row cylindrical roller bearing, NU design
View full technical record →TIMKENNU20/800EMAW40RW220
Cylindrical roller bearing
View full technical record →TIMKENNU20/800EMAW73W220C3
Cylindrical roller bearing
View full technical record →SKFNU 2080 ECMA
Single row cylindrical roller bearing, NU design
View full technical record →FAGNU2080-E-M1A
Cylindrical roller bearing
View full technical record →TIMKENNU2080EMAW220
Cylindrical roller bearing
View full technical record →TIMKENNU2080EMAW73W220
Cylindrical roller bearing
View full technical record →FAGNU2084-E-M1
Cylindrical roller bearing
View full technical record →SKFNU 20/850 ECMA
Single row cylindrical roller bearing, NU design
View full technical record →TIMKENNU20/850EMAW73W220C3
Cylindrical roller bearing
View full technical record →SKFNU 2088 ECMA
Single row cylindrical roller bearing, NU design
View full technical record →FAGNU2088-E-M1A
Cylindrical roller bearing
View full technical record →Check the drawing before substituting
Nominal dimensions are not shaft-fit tolerances. Different variants can add grooves, flanges, wider rings or assembly components. When the table has different dimensions, the complete designation—not the shared prefix—controls.
Reference basis & data limits
Manufacturer terminology is retained in the product records. Technical reference basis: JTEKT Basic Bearing Knowledge (boundary dimensions, tolerance classes and lubrication); NSK Bearing ABCs (lubrication, designations and clearance); NTN technical FAQs (closure codes and component interchange); SKF rolling-bearing selection and maintenance references.
Selection workflows and catalogue grouping are BearingScope editorial aids. Verify the current drawing and application requirements before using a candidate. Missing database information is not converted into an assumed match.