NU 207 bearing dimensions & suffix variants
Look up recorded dimensions for designations beginning with NU 207. The table retains complete manufacturer designations so special suffixes and different dimensional variants remain visible.
On this page5 sections ⌄
Find by measured dimensions
Enter bore d, outside diameter D and width B. Use decimals or inch fractions such as 1/2 or 1 1/4.
NU 207 dimensions and recorded technical data
Use the named dimensions for each complete record below. A generic d×D×B answer is not asserted where the base record is missing, dimension symbols are unverified, or the product uses a different geometry such as a housing or thrust assembly. Suffix records are not substituted for a missing base specification.
The numeric series boundary is preserved: a longer number is not included merely because its first digits match. 14 recorded variants are listed. A dash means the value is missing, not zero.
No recorded variant matches these filters. Clear a filter to see other records; no substitute has been inferred.
| Brand / full designation | Named dimensions (mm / in) | Dynamic C (kN) | Static C0 (kN) | Reference speed (rpm) | Limiting speed (rpm) | Mass (kg / g) |
|---|---|---|---|---|---|---|
| SKFNU 207 ECJSingle row cylindrical roller bearing, NU design |
| 56 kN | 48 kN | 11000 rpm | 12000 rpm | 0.31 kg310 g |
| SKFNU 207 ECJ/C3Single row cylindrical roller bearing, NU design |
| 56 kN | 48 kN | 11000 rpm | 12000 rpm | 0.303 kg303 g |
| SKFNU 207 ECKP/C3Single row cylindrical roller bearing, NU design, with tapered bore |
| 56 kN | 48 kN | 11000 rpm | 12000 rpm | 0.294 kg294 g |
| SKFNU 207 ECMSingle row cylindrical roller bearing, NU design |
| 56 kN | 48 kN | 11000 rpm | 12000 rpm | 0.34 kg340 g |
| SKFNU 207 ECMLSingle row cylindrical roller bearing, NU design |
| 56 kN | 48 kN | 11000 rpm | 18000 rpm | 0.347 kg347 g |
| SKFNU 207 ECML/P63LSingle row cylindrical roller bearing, NU design |
| 56 kN | 48 kN | 11000 rpm | 18000 rpm | 0.327 kg327 g |
| SKFNU 207 ECPSingle row cylindrical roller bearing, NU design |
| 56 kN | 48 kN | 11000 rpm | 12000 rpm | 0.293 kg293 g |
| SKFNU 207 ECP/C3Single row cylindrical roller bearing, NU design |
| 56 kN | 48 kN | 11000 rpm | 12000 rpm | 0.293 kg293 g |
| SKFNU 207 ECPHSingle row cylindrical roller bearing, NU design |
| 56 kN | 48 kN | 11000 rpm | 12000 rpm | 0.301 kg301 g |
| FAGNU207-E-XL-M1Cylindrical roller bearing |
| 59 kN | 50 kN | 8100 rpm | 18300 rpm | 0.315 kg315 g |
| FAGNU207-E-XL-M1ACylindrical roller bearing |
| 59 kN | 50 kN | 8100 rpm | 18300 rpm | 0.31508 kg315.08 g |
| FAGNU207-E-XL-TVP2Cylindrical roller bearing |
| 59 kN | 50 kN | 8100 rpm | 14100 rpm | 0.2922 kg292.2 g |
| NSKNU207EWCylindrical roller bearing |
| 62 kN | 50 kN | — | — | — |
| KOYONU207RCylindrical roller bearing |
| 62.9 kN | 50.2 kN | — | 9300 rpmLimiting Speeds(Grease Lub.): 9300 min-1Limiting Speeds(Oil Lub.): 11000 min-1 | 0.306 kg306 g |
Compare recorded seals, clearance, precision and materials
Manufacturer wording is retained. A missing property is not inferred from another brand or a similar suffix.
| Brand / designation | Closure | Original precision | Clearance | Cage | Material | Lubricant |
|---|---|---|---|---|---|---|
| SKF NU 207 ECJ | Without | Not recorded | CN | Sheet metal | Not recorded | None |
| SKF NU 207 ECJ/C3 | Without | Not recorded | C3 | Sheet metal | Not recorded | None |
| SKF NU 207 ECKP/C3 | Without | Not recorded | C3 | Non-metallic | Not recorded | None |
| SKF NU 207 ECM | Without | Not recorded | CN | Machined brass | Not recorded | None |
| SKF NU 207 ECML | Without | Not recorded | CN | Machined brass | Not recorded | None |
| SKF NU 207 ECML/P63L | Without | Not recorded | C3L | Machined brass | Not recorded | None |
| SKF NU 207 ECP | Without | Not recorded | CN | Non-metallic | Not recorded | None |
| SKF NU 207 ECP/C3 | Without | Not recorded | C3 | Non-metallic | Not recorded | None |
| SKF NU 207 ECPH | Without | Not recorded | CN | Non-metallic | Not recorded | None |
| FAG NU207-E-XL-M1 | Not recorded | PN — Normal (ISO 492:2023) | CN (Group N) — Normal internal clearance | M1 — Two Piece Brass Cage Roller Guided | Not recorded | Not recorded |
| FAG NU207-E-XL-M1A | Not recorded | PN — Normal (ISO 492:2023) | CN (Group N) — Normal internal clearance | M1A — Two Piece Brass Cage Lip guided | Not recorded | Not recorded |
| FAG NU207-E-XL-TVP2 | Not recorded | PN — Normal (ISO 492:2023) | CN (Group N) — Normal internal clearance | TVP2 — Solid Window Cage made from PA66 | Not recorded | Not recorded |
| NSK NU207EW | Not recorded | Not recorded | Not recorded | Pressed steel | Not recorded | Not recorded |
| KOYO NU207R | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
How to compare these values
- Use the displayed dimension names and original symbols. Housing length L, height H2 and flange width are not bearing outside diameter D. A catalogue width with an unverified symbol must not be assumed to be inner-ring width B or assembly width T. Open the product record for mounting dimensions and geometry.
- Inch values are calculated from the recorded millimetres using 25.4 mm per inch, rounded to six decimal places. They do not change a metric bearing into an inch-series bearing. Gram values are converted from the recorded mass in kilograms.
- C and C0 describe different rating conditions. They are not a single safe working-load limit and cannot replace an application load calculation.
- Reference and limiting speeds are separate catalogue values. The source grease/oil context is shown where recorded. Lubricant, seals, loads, fit, clearance and cooling affect the usable operating speed.
- A common base number does not prove equivalent seals, clearance, precision, material or interchangeability. Open the full designation for these fields.
Related prefix matches — other model numbers may appear
These discovery results can contain a longer number or a different component. They are not specifications for the requested exact model. Open the complete product to inspect its original geometry.
NU 20/710 ECMA/HB1
Single row cylindrical roller bearing, NU design
View full technical record →TIMKENNU20/710EMAW73W220C3
Cylindrical roller bearing
View full technical record →SKFNU 2072 ECMA
Single row cylindrical roller bearing, NU design
View full technical record →SKFNU 2072 ECMA/C3
Single row cylindrical roller bearing, NU design
View full technical record →FAGNU2072-E-M1A
Cylindrical roller bearing
View full technical record →FAGNU2072-E-M1A-C3
Cylindrical roller bearing
View full technical record →TIMKENNU20/750EMAW73W220C3
Cylindrical roller bearing
View full technical record →SKFNU 207 ECJ
Single row cylindrical roller bearing, NU design
View full technical record →SKFNU 207 ECJ/C3
Single row cylindrical roller bearing, NU design
View full technical record →SKFNU 207 ECKP/C3
Single row cylindrical roller bearing, NU design, with tapered bore
View full technical record →SKFNU 207 ECM
Single row cylindrical roller bearing, NU design
View full technical record →SKFNU 207 ECML
Single row cylindrical roller bearing, NU design
View full technical record →Check the drawing before substituting
Nominal dimensions are not shaft-fit tolerances. Different variants can add grooves, flanges, wider rings or assembly components. When the table has different dimensions, the complete designation—not the shared prefix—controls.
Reference basis & data limits
Manufacturer terminology is retained in the product records. Technical reference basis: JTEKT Basic Bearing Knowledge (boundary dimensions, tolerance classes and lubrication); NSK Bearing ABCs (lubrication, designations and clearance); NTN technical FAQs (closure codes and component interchange); SKF rolling-bearing selection and maintenance references.
Selection workflows and catalogue grouping are BearingScope editorial aids. Verify the current drawing and application requirements before using a candidate. Missing database information is not converted into an assumed match.