Find · understand · compare

NJ2216 bearing dimensions & suffix variants

Look up recorded dimensions for designations beginning with NJ2216. The table retains complete manufacturer designations so special suffixes and different dimensional variants remain visible.

On this page5 sections

Find by measured dimensions

Enter bore d, outside diameter D and width B. Use decimals or inch fractions such as 1/2 or 1 1/4.

Exact model evidence

NJ2216 dimensions and recorded technical data

The recorded NJ2216 base designation measures 80×140×33 mm (inside diameter d × outside diameter D × width B). This answer uses unsuffixed records from KOYO. It does not assign the same dimensions or operating ratings to every suffix.

The numeric series boundary is preserved: a longer number is not included merely because its first digits match. 24 recorded variants are listed. A dash means the value is missing, not zero.

Exact designation reference

Catalogue parameters for NJ2216

Choose the complete brand and marking before reading a value. These source-labelled records add dimensions, construction and engineering properties where they were recorded; a shared model number does not establish interchangeability.

Units, ranges and minimum/maximum qualifiers are retained. The data is a dated catalogue reference, not a certified drawing, a complete current specification or an operating approval.

KOYO NJ2216

KOYO NJ2216 — 26 recorded parameters

Cylindrical roller bearing

Reference: JTEKT / Koyo catalogue; source snapshot 2026-09-02.

Read the complete suffix and recorded construction. Similar dimensions do not prove identical seals, clearance, precision or material.

Values shown are retained from the recorded source. Zero boundary dimensions and zero load ratings from incomplete legacy feeds are withheld rather than presented as usable specifications.

Technical Data

Parameter	Source symbol	Recorded value
d	Not separately recorded	80 mm
D	Not separately recorded	140 mm
B	Not separately recorded	33 mm
R(Min.)	Not separately recorded	2 mm
R1(Min.)	Not separately recorded	2 mm
Fw	Not separately recorded	95.3 mm
Ew	Not separately recorded	- mm
Basic Load Ratings : Cr	Not separately recorded	184 kN
Basic Load Ratings : C0R	Not separately recorded	186 kN
Fatigue Load Limit : Cu	Not separately recorded	27.8 kN
Limiting Speeds(Grease Lub.)	Not separately recorded	4000 min-1
Limiting Speeds(Oil Lub.)	Not separately recorded	5400 min-1
Sd1	Not separately recorded	- mm
B1	Not separately recorded	- mm
B2	Not separately recorded	- mm
Da(Min.)	Not separately recorded	- mm
Db(Min.)	Not separately recorded	89 mm
Db(Max.)	Not separately recorded	94 mm
Dc(Min.)	Not separately recorded	- mm
Dd(Min.)	Not separately recorded	- mm
Da(Max.)	Not separately recorded	131 mm
Db(Max.)	Not separately recorded	- mm
Db(Min.)	Not separately recorded	- mm
Ra(Max.)	Not separately recorded	2 mm
Rb(Max.)	Not separately recorded	2 mm
Mass(Refer.)	Not separately recorded	2.01 kg

Open KOYO NJ2216 product record →

Clearance tables →Precision classes →Load calculations →Interchange checks →

Brand / full designation	Named dimensions (mm / in)	Dynamic C (kN)	Static C0 (kN)	Reference speed (rpm)	Limiting speed (rpm)	Mass (kg / g)
KOYONJ2216Cylindrical roller bearing	Bore diameter (d) 80 mm 3.149606 in Outside diameter (D) 140 mm 5.511811 in Width (B) 33 mm 1.299213 in	184 kN	186 kN	—	4000 rpmLimiting Speeds(Grease Lub.): 4000 min-1Limiting Speeds(Oil Lub.): 5400 min-1	2.01 kg2010 g
SKFNJ 2216 ECJSingle row cylindrical roller bearing, NJ design	Bore diameter (d) 80 mm 3.149606 in Outside diameter (D) 140 mm 5.511811 in Width (B) 33 mm 1.299213 in	212 kN	245 kN	5300 rpm	5600 rpm	2.02 kg2020 g
SKFNJ 2216 ECMSingle row cylindrical roller bearing, NJ design	Bore diameter (d) 80 mm 3.149606 in Outside diameter (D) 140 mm 5.511811 in Width (B) 33 mm 1.299213 in	212 kN	245 kN	5300 rpm	5600 rpm	2.28 kg2280 g
SKFNJ 2216 ECMLSingle row cylindrical roller bearing, NJ design	Bore diameter (d) 80 mm 3.149606 in Outside diameter (D) 140 mm 5.511811 in Width (B) 33 mm 1.299213 in	212 kN	245 kN	5300 rpm	8500 rpm	2.2 kg2200 g
SKFNJ 2216 ECML/C4Single row cylindrical roller bearing, NJ design	Recorded bore (d) 80 mm 3.149606 in Recorded outside dimension (D) 140 mm 5.511811 in Catalogue width (symbol unverified) 33 mm 1.299213 in	212 kN	245 kN	5300 rpm	8500 rpm	2.2 kg2200 g
SKFNJ 2216 ECML/C4HSingle row cylindrical roller bearing, NJ design	Recorded bore (d) 80 mm 3.149606 in Recorded outside dimension (D) 140 mm 5.511811 in Catalogue width (symbol unverified) 33 mm 1.299213 in	212 kN	245 kN	5300 rpm	8500 rpm	2.2 kg2200 g
SKFNJ 2216 ECPSingle row cylindrical roller bearing, NJ design	Bore diameter (d) 80 mm 3.149606 in Outside diameter (D) 140 mm 5.511811 in Width (B) 33 mm 1.299213 in	212 kN	245 kN	5300 rpm	5600 rpm	2.03 kg2030 g
SKFNJ 2216 ECP/C3Single row cylindrical roller bearing, NJ design	Recorded bore (d) 80 mm 3.149606 in Recorded outside dimension (D) 140 mm 5.511811 in Catalogue width (symbol unverified) 33 mm 1.299213 in	212 kN	245 kN	5300 rpm	5600 rpm	2.03 kg2030 g
FAGNJ2216-E-XL-M1Cylindrical roller bearing	Bore diameter (d) 80 mm 3.149606 in Outside diameter (D) 140 mm 5.511811 in Width (B) 33 mm 1.299213 in	221 kN	244 kN	3400 rpm	9000 rpm	2.409 kg2409 g
FAGNJ2216-E-XL-M1-C3Cylindrical roller bearing	Bore diameter (d) 80 mm 3.149606 in Outside diameter (D) 140 mm 5.511811 in Width (B) 33 mm 1.299213 in	221 kN	244 kN	3400 rpm	9000 rpm	2.409 kg2409 g
FAGNJ2216-E-XL-M1-C4Cylindrical roller bearing	Bore diameter (d) 80 mm 3.149606 in Outside diameter (D) 140 mm 5.511811 in Width (B) 33 mm 1.299213 in	221 kN	244 kN	3400 rpm	9000 rpm	2.23 kg2230 g
FAGNJ2216-E-XL-M1-H257A-J20AA-R105-125NACylindrical roller bearing	Bore diameter (d) 80 mm 3.149606 in Outside diameter (D) 140 mm 5.511811 in Width (B) 33 mm 1.299213 in	221 kN	244 kN	3400 rpm	9000 rpm	2.23 kg2230 g
FAGNJ2216-E-XL-M1-H67C-J20AA-C4Cylindrical roller bearing	Bore diameter (d) 80 mm 3.149606 in Outside diameter (D) 140 mm 5.511811 in Width (B) 33 mm 1.299213 in	221 kN	244 kN	3400 rpm	9000 rpm	2.211 kg2211 g
FAGNJ2216-E-XL-MPAX-C3Cylindrical roller bearing	Bore diameter (d) 80 mm 3.149606 in Outside diameter (D) 140 mm 5.511811 in Width (B) 33 mm 1.299213 in	221 kN	244 kN	3400 rpm	9000 rpm	2.23 kg2230 g
FAGNJ2216-E-XL-MPAX-C4Cylindrical roller bearing	Bore diameter (d) 80 mm 3.149606 in Outside diameter (D) 140 mm 5.511811 in Width (B) 33 mm 1.299213 in	221 kN	244 kN	3400 rpm	9000 rpm	2.23 kg2230 g
FAGNJ2216-E-XL-MPAX-C4H/NACylindrical roller bearing	Bore diameter (d) 80 mm 3.149606 in Outside diameter (D) 140 mm 5.511811 in Width (B) 33 mm 1.299213 in	221 kN	244 kN	3400 rpm	9000 rpm	2.23 kg2230 g
FAGNJ2216-E-XL-TVP2Cylindrical roller bearing	Bore diameter (d) 80 mm 3.149606 in Outside diameter (D) 140 mm 5.511811 in Width (B) 33 mm 1.299213 in	221 kN	244 kN	3400 rpm	7000 rpm	2.195 kg2195 g
INANJ2216-E-XL-MPAX-C5L/NACylindrical roller bearing	Recorded bore (d) 80 mm 3.149606 in Recorded outside dimension (D) 140 mm 5.511811 in Catalogue width (symbol unverified) 33 mm 1.299213 in	221 kN	244 kN	3400 rpm	9000 rpm	2.23 kg2230 g
TIMKENNJ2216EJCylindrical roller bearing	Recorded bore (d) 80 mm 3.149606 in Recorded outside dimension (D) 140 mm 5.511811 in Catalogue width (symbol unverified) 33 mm 1.299213 in	208 kN	245 kN	—	—	2 kg2000 g
TIMKENNJ2216EJC3Cylindrical roller bearing	Recorded bore (d) 80 mm 3.149606 in Recorded outside dimension (D) 140 mm 5.511811 in Catalogue width (symbol unverified) 33 mm 1.299213 in	208 kN	245 kN	—	—	2 kg2000 g
TIMKENNJ2216EMACylindrical roller bearing	Recorded bore (d) 80 mm 3.149606 in Recorded outside dimension (D) 140 mm 5.511811 in Catalogue width (symbol unverified) 33 mm 1.299213 in	226 kN	245 kN	—	—	2.2 kg2200 g
TIMKENNJ2216EMAC3Cylindrical roller bearing	Recorded bore (d) 80 mm 3.149606 in Recorded outside dimension (D) 140 mm 5.511811 in Catalogue width (symbol unverified) 33 mm 1.299213 in	226 kN	245 kN	—	—	2.2 kg2200 g
NSKNJ2216ETCylindrical roller bearing	Bore diameter (d) 80 mm 3.149606 in Outside diameter (D) 140 mm 5.511811 in Bearing width (B) 33 mm 1.299213 in	229 kN	243 kN	—	—	—
KOYONJ2216RCylindrical roller bearing	Bore diameter (d) 80 mm 3.149606 in Outside diameter (D) 140 mm 5.511811 in Width (B) 33 mm 1.299213 in	233 kN	243 kN	—	4000 rpmLimiting Speeds(Grease Lub.): 4000 min-1Limiting Speeds(Oil Lub.): 5300 min-1	2.07 kg2070 g

Compare recorded seals, clearance, precision and materials

Manufacturer wording is retained. A missing property is not inferred from another brand or a similar suffix.

Brand / designation	Closure	Original precision	Clearance	Cage	Material	Lubricant
KOYO NJ2216	Not recorded	Not recorded	Not recorded	Not recorded	Not recorded	Not recorded
SKF NJ 2216 ECJ	Without	Not recorded	CN	Sheet metal	Not recorded	None
SKF NJ 2216 ECM	Without	Not recorded	CN	Machined brass	Not recorded	None
SKF NJ 2216 ECML	Without	Not recorded	CN	Machined brass	Not recorded	None
SKF NJ 2216 ECML/C4	Without	Not recorded	C4	Machined brass	Not recorded	None
SKF NJ 2216 ECML/C4H	Without	Not recorded	C4H	Machined brass	Not recorded	None
SKF NJ 2216 ECP	Without	Not recorded	CN	Non-metallic	Not recorded	None
SKF NJ 2216 ECP/C3	Without	Not recorded	C3	Non-metallic	Not recorded	None
FAG NJ2216-E-XL-M1	Not recorded	PN — Normal (ISO 492:2023)	CN (Group N) — Normal internal clearance	M1 — Two Piece Brass Cage Roller Guided	Not recorded	Not recorded
FAG NJ2216-E-XL-M1-C3	Not recorded	PN — Normal (ISO 492:2023)	C3 (Group 3) — Internal clearance larger than CN	M1 — Two Piece Brass Cage Roller Guided	Not recorded	Not recorded
FAG NJ2216-E-XL-M1-C4	Not recorded	PN — Normal (ISO 492:2023)	C4 (Group 4) — Internal clearance larger than C3	M1 — Two Piece Brass Cage Roller Guided	Not recorded	Not recorded
FAG NJ2216-E-XL-M1-H257A-J20AA-R105-125NA	Not recorded	PN — Normal (ISO 492:2023)	Not recorded	M1 — Two Piece Brass Cage Roller Guided	Not recorded	Not recorded
FAG NJ2216-E-XL-M1-H67C-J20AA-C4	Not recorded	PN — Normal (ISO 492:2023)	C4 (Group 4) — Internal clearance larger than C3	M1 — Two Piece Brass Cage Roller Guided	Not recorded	Not recorded
FAG NJ2216-E-XL-MPAX-C3	Not recorded	PN — Normal (ISO 492:2023)	C3 (Group 3) — Internal clearance larger than CN	MPAX — One Piece Brass Cage Lip Guided	Not recorded	Not recorded
FAG NJ2216-E-XL-MPAX-C4	Not recorded	PN — Normal (ISO 492:2023)	C4 (Group 4) — Internal clearance larger than C3	MPAX — One Piece Brass Cage Lip Guided	Not recorded	Not recorded
FAG NJ2216-E-XL-MPAX-C4H/NA	Not recorded	PN — Normal (ISO 492:2023)	Not recorded	MPAX — One Piece Brass Cage Lip Guided	Not recorded	Not recorded
FAG NJ2216-E-XL-TVP2	Not recorded	PN — Normal (ISO 492:2023)	CN (Group N) — Normal internal clearance	TVP2 — Solid Window Cage made from PA66	Not recorded	Not recorded
INA NJ2216-E-XL-MPAX-C5L/NA	Not recorded	Not recorded	Not recorded	Not recorded	Not recorded	Not recorded
TIMKEN NJ2216EJ	Open	Not recorded	Not recorded	Window Steel cage	Not recorded	Not recorded
TIMKEN NJ2216EJC3	Open	Not recorded	Not recorded	Window Steel cage	Not recorded	Not recorded
TIMKEN NJ2216EMA	Open	Not recorded	Not recorded	Window Brass cage	Not recorded	Not recorded
TIMKEN NJ2216EMAC3	Open	Not recorded	Not recorded	Window Brass cage	Not recorded	Not recorded
NSK NJ2216ET	Not recorded	Not recorded	Not recorded	Polyamide 66	Not recorded	Not recorded
KOYO NJ2216R	Not recorded	Not recorded	Not recorded	Not recorded	Not recorded	Not recorded

How to compare these values

Use the displayed dimension names and original symbols. Housing length L, height H2 and flange width are not bearing outside diameter D. A catalogue width with an unverified symbol must not be assumed to be inner-ring width B or assembly width T. Open the product record for mounting dimensions and geometry.
Inch values are calculated from the recorded millimetres using 25.4 mm per inch, rounded to six decimal places. They do not change a metric bearing into an inch-series bearing. Gram values are converted from the recorded mass in kilograms.
C and C0 describe different rating conditions. They are not a single safe working-load limit and cannot replace an application load calculation.
Reference and limiting speeds are separate catalogue values. The source grease/oil context is shown where recorded. Lubricant, seals, loads, fit, clearance and cooling affect the usable operating speed.
A common base number does not prove equivalent seals, clearance, precision, material or interchangeability. Open the full designation for these fields.

Check load calculations →Estimate rating life →Decode the complete marking →Check replacement evidence →

Related prefix matches — other model numbers may appear

These discovery results can contain a longer number or a different component. They are not specifications for the requested exact model. Open the complete product to inspect its original geometry.

KOYO