Find · understand · compare

NJ 314 bearing dimensions & suffix variants

Look up recorded dimensions for designations beginning with NJ 314. The table retains complete manufacturer designations so special suffixes and different dimensional variants remain visible.

On this page5 sections

Find by measured dimensions

Enter bore d, outside diameter D and width B. Use decimals or inch fractions such as 1/2 or 1 1/4.

Exact model evidence

NJ 314 dimensions and recorded technical data

Use the named dimensions for each complete record below. A generic d×D×B answer is not asserted where the base record is missing, dimension symbols are unverified, or the product uses a different geometry such as a housing or thrust assembly. Suffix records are not substituted for a missing base specification.

The numeric series boundary is preserved: a longer number is not included merely because its first digits match. 19 recorded variants are listed. A dash means the value is missing, not zero.

Brand / full designation	Named dimensions (mm / in)	Dynamic C (kN)	Static C0 (kN)	Reference speed (rpm)	Limiting speed (rpm)	Mass (kg / g)
SKFNJ 314 ECJSingle row cylindrical roller bearing, NJ design	Bore diameter (d) 70 mm 2.755906 in Outside diameter (D) 150 mm 5.905512 in Width (B) 35 mm 1.377953 in	236 kN	228 kN	4800 rpm	5600 rpm	2.83 kg2830 g
SKFNJ 314 ECJ/C3Single row cylindrical roller bearing, NJ design	Recorded bore (d) 70 mm 2.755906 in Recorded outside dimension (D) 150 mm 5.905512 in Catalogue width (symbol unverified) 35 mm 1.377953 in	236 kN	228 kN	4800 rpm	5600 rpm	2.83 kg2830 g
SKFNJ 314 ECMSingle row cylindrical roller bearing, NJ design	Bore diameter (d) 70 mm 2.755906 in Outside diameter (D) 150 mm 5.905512 in Width (B) 35 mm 1.377953 in	236 kN	228 kN	4800 rpm	5600 rpm	3.23 kg3230 g
SKFNJ 314 ECM/C3Single row cylindrical roller bearing, NJ design	Recorded bore (d) 70 mm 2.755906 in Recorded outside dimension (D) 150 mm 5.905512 in Catalogue width (symbol unverified) 35 mm 1.377953 in	236 kN	228 kN	4800 rpm	5600 rpm	3.23 kg3230 g
SKFNJ 314 ECM/C4VA301Single row cylindrical roller bearing, NJ design	Recorded bore (d) 70 mm 2.755906 in Recorded outside dimension (D) 150 mm 5.905512 in Catalogue width (symbol unverified) 35 mm 1.377953 in	236 kN	228 kN	4800 rpm	5600 rpm	3.23 kg3230 g
SKFNJ 314 ECMLSingle row cylindrical roller bearing, NJ design	Bore diameter (d) 70 mm 2.755906 in Outside diameter (D) 150 mm 5.905512 in Width (B) 35 mm 1.377953 in	236 kN	228 kN	4800 rpm	8500 rpm	3.15 kg3150 g
SKFNJ 314 ECML/C4Single row cylindrical roller bearing, NJ design	Recorded bore (d) 70 mm 2.755906 in Recorded outside dimension (D) 150 mm 5.905512 in Catalogue width (symbol unverified) 35 mm 1.377953 in	236 kN	228 kN	4800 rpm	8500 rpm	3.15 kg3150 g
SKFNJ 314 ECPSingle row cylindrical roller bearing, NJ design	Bore diameter (d) 70 mm 2.755906 in Outside diameter (D) 150 mm 5.905512 in Width (B) 35 mm 1.377953 in	236 kN	228 kN	4800 rpm	5600 rpm	2.77 kg2770 g
SKFNJ 314 ECP/C3Single row cylindrical roller bearing, NJ design	Recorded bore (d) 70 mm 2.755906 in Recorded outside dimension (D) 150 mm 5.905512 in Catalogue width (symbol unverified) 35 mm 1.377953 in	236 kN	228 kN	4800 rpm	5600 rpm	2.82 kg2820 g
SKFNJ 314 ECP/C4Single row cylindrical roller bearing, NJ design	Recorded bore (d) 70 mm 2.755906 in Recorded outside dimension (D) 150 mm 5.905512 in Catalogue width (symbol unverified) 35 mm 1.377953 in	236 kN	228 kN	4800 rpm	5600 rpm	2.82 kg2820 g
FAGNJ314-E-XL-M1Cylindrical roller bearing	Bore diameter (d) 70 mm 2.755906 in Outside diameter (D) 150 mm 5.905512 in Width (B) 35 mm 1.377953 in	242 kN	222 kN	4500 rpm	8200 rpm	3.089 kg3089 g
FAGNJ314-E-XL-M1-F1-C3Cylindrical roller bearing	Bore diameter (d) 70 mm 2.755906 in Outside diameter (D) 150 mm 5.905512 in Width (B) 35 mm 1.377953 in	242 kN	222 kN	4500 rpm	8200 rpm	3.12 kg3120 g
FAGNJ314-E-XL-MPAX-C3Cylindrical roller bearing	Bore diameter (d) 70 mm 2.755906 in Outside diameter (D) 150 mm 5.905512 in Width (B) 35 mm 1.377953 in	242 kN	222 kN	4500 rpm	8200 rpm	3.12 kg3120 g
FAGNJ314-E-XL-TVP2Cylindrical roller bearing	Bore diameter (d) 70 mm 2.755906 in Outside diameter (D) 150 mm 5.905512 in Width (B) 35 mm 1.377953 in	242 kN	222 kN	4500 rpm	6300 rpm	2.79 kg2790 g
TIMKENNJ314EMACylindrical roller bearing	Recorded bore (d) 70 mm 2.755906 in Recorded outside dimension (D) 150 mm 5.905512 in Catalogue width (symbol unverified) 35 mm 1.377953 in	231 kN	226 kN	—	—	3.1 kg3100 g
TIMKENNJ314EMAC3Cylindrical roller bearing	Recorded bore (d) 70 mm 2.755906 in Recorded outside dimension (D) 150 mm 5.905512 in Catalogue width (symbol unverified) 35 mm 1.377953 in	231 kN	226 kN	—	—	3.1 kg3100 g
NSKNJ314EMCylindrical roller bearing	Bore diameter (d) 70 mm 2.755906 in Outside diameter (D) 150 mm 5.905512 in Bearing width (B) 35 mm 1.377953 in	252 kN	222 kN	—	—	—
NSKNJ314WCylindrical roller bearing	Bore diameter (d) 70 mm 2.755906 in Outside diameter (D) 150 mm 5.905512 in Bearing width (B) 35 mm 1.377953 in	195 kN	168 kN	—	—	—
KOYONJ314RCylindrical roller bearing	Bore diameter (d) 70 mm 2.755906 in Outside diameter (D) 150 mm 5.905512 in Width (B) 35 mm 1.377953 in	256 kN	222 kN	—	4000 rpmLimiting Speeds(Grease Lub.): 4000 min-1Limiting Speeds(Oil Lub.): 5300 min-1	2.88 kg2880 g

Compare recorded seals, clearance, precision and materials

Manufacturer wording is retained. A missing property is not inferred from another brand or a similar suffix.

Brand / designation	Closure	Original precision	Clearance	Cage	Material	Lubricant
SKF NJ 314 ECJ	Without	Not recorded	CN	Sheet metal	Not recorded	None
SKF NJ 314 ECJ/C3	Without	Not recorded	C3	Sheet metal	Not recorded	None
SKF NJ 314 ECM	Without	Not recorded	CN	Machined brass	Not recorded	None
SKF NJ 314 ECM/C3	Without	Not recorded	C3	Machined brass	Not recorded	None
SKF NJ 314 ECM/C4VA301	Without	Not recorded	C4	Machined brass	Not recorded	None
SKF NJ 314 ECML	Without	Not recorded	CN	Machined brass	Not recorded	None
SKF NJ 314 ECML/C4	Without	Not recorded	C4	Machined brass	Not recorded	None
SKF NJ 314 ECP	Without	Not recorded	CN	Non-metallic	Not recorded	None
SKF NJ 314 ECP/C3	Without	Not recorded	C3	Non-metallic	Not recorded	None
SKF NJ 314 ECP/C4	Without	Not recorded	C4	Non-metallic	Not recorded	None
FAG NJ314-E-XL-M1	Not recorded	PN — Normal (ISO 492:2023)	CN (Group N) — Normal internal clearance	M1 — Two Piece Brass Cage Roller Guided	Not recorded	Not recorded
FAG NJ314-E-XL-M1-F1-C3	Not recorded	PN — Normal (ISO 492:2023)	C3 (Group 3) — Internal clearance larger than CN	M1 — Two Piece Brass Cage Roller Guided	Not recorded	Not recorded
FAG NJ314-E-XL-MPAX-C3	Not recorded	PN — Normal (ISO 492:2023)	C3 (Group 3) — Internal clearance larger than CN	MPAX — One Piece Brass Cage Lip Guided	Not recorded	Not recorded
FAG NJ314-E-XL-TVP2	Not recorded	PN — Normal (ISO 492:2023)	CN (Group N) — Normal internal clearance	TVP2 — Solid Window Cage made from PA66	Not recorded	Not recorded
TIMKEN NJ314EMA	Open	Not recorded	Not recorded	Window Brass cage	Not recorded	Not recorded
TIMKEN NJ314EMAC3	Open	Not recorded	Not recorded	Window Brass cage	Not recorded	Not recorded
NSK NJ314EM	Not recorded	Not recorded	Not recorded	Machined brass	Not recorded	Not recorded
NSK NJ314W	Not recorded	Not recorded	Not recorded	Pressed steel	Not recorded	Not recorded
KOYO NJ314R	Not recorded	Not recorded	Not recorded	Not recorded	Not recorded	Not recorded

How to compare these values

Use the displayed dimension names and original symbols. Housing length L, height H2 and flange width are not bearing outside diameter D. A catalogue width with an unverified symbol must not be assumed to be inner-ring width B or assembly width T. Open the product record for mounting dimensions and geometry.
Inch values are calculated from the recorded millimetres using 25.4 mm per inch, rounded to six decimal places. They do not change a metric bearing into an inch-series bearing. Gram values are converted from the recorded mass in kilograms.
C and C0 describe different rating conditions. They are not a single safe working-load limit and cannot replace an application load calculation.
Reference and limiting speeds are separate catalogue values. The source grease/oil context is shown where recorded. Lubricant, seals, loads, fit, clearance and cooling affect the usable operating speed.
A common base number does not prove equivalent seals, clearance, precision, material or interchangeability. Open the full designation for these fields.

Check load calculations →Estimate rating life →Decode the complete marking →Check replacement evidence →

Related prefix matches — other model numbers may appear

These discovery results can contain a longer number or a different component. They are not specifications for the requested exact model. Open the complete product to inspect its original geometry.

SKF