Find · understand · compare

NJ 306 bearing dimensions & suffix variants

Look up recorded dimensions for designations beginning with NJ 306. The table retains complete manufacturer designations so special suffixes and different dimensional variants remain visible.

On this page5 sections

Find by measured dimensions

Enter bore d, outside diameter D and width B. Use decimals or inch fractions such as 1/2 or 1 1/4.

Exact model evidence

NJ 306 dimensions and recorded technical data

Use the named dimensions for each complete record below. A generic d×D×B answer is not asserted where the base record is missing, dimension symbols are unverified, or the product uses a different geometry such as a housing or thrust assembly. Suffix records are not substituted for a missing base specification.

The numeric series boundary is preserved: a longer number is not included merely because its first digits match. 11 recorded variants are listed. A dash means the value is missing, not zero.

Brand / full designation	Named dimensions (mm / in)	Dynamic C (kN)	Static C0 (kN)	Reference speed (rpm)	Limiting speed (rpm)	Mass (kg / g)
SKFNJ 306 ECJSingle row cylindrical roller bearing, NJ design	Bore diameter (d) 30 mm 1.181102 in Outside diameter (D) 72 mm 2.834646 in Width (B) 19 mm 0.748031 in	58.5 kN	48 kN	11000 rpm	12000 rpm	0.371 kg371 g
SKFNJ 306 ECJ/C3Single row cylindrical roller bearing, NJ design	Recorded bore (d) 30 mm 1.181102 in Recorded outside dimension (D) 72 mm 2.834646 in Catalogue width (symbol unverified) 19 mm 0.748031 in	58.5 kN	48 kN	11000 rpm	12000 rpm	0.371 kg371 g
SKFNJ 306 ECMSingle row cylindrical roller bearing, NJ design	Bore diameter (d) 30 mm 1.181102 in Outside diameter (D) 72 mm 2.834646 in Width (B) 19 mm 0.748031 in	58.5 kN	48 kN	11000 rpm	12000 rpm	0.435 kg435 g
SKFNJ 306 ECMLSingle row cylindrical roller bearing, NJ design	Bore diameter (d) 30 mm 1.181102 in Outside diameter (D) 72 mm 2.834646 in Width (B) 19 mm 0.748031 in	58.5 kN	48 kN	11000 rpm	19000 rpm	0.422 kg422 g
SKFNJ 306 ECPSingle row cylindrical roller bearing, NJ design	Bore diameter (d) 30 mm 1.181102 in Outside diameter (D) 72 mm 2.834646 in Width (B) 19 mm 0.748031 in	58.5 kN	48 kN	11000 rpm	12000 rpm	0.373 kg373 g
SKFNJ 306 ECP/C3Single row cylindrical roller bearing, NJ design	Recorded bore (d) 30 mm 1.181102 in Recorded outside dimension (D) 72 mm 2.834646 in Catalogue width (symbol unverified) 19 mm 0.748031 in	58.5 kN	48 kN	11000 rpm	12000 rpm	0.373 kg373 g
SKFNJ 306 ECP/C4Single row cylindrical roller bearing, NJ design	Recorded bore (d) 30 mm 1.181102 in Recorded outside dimension (D) 72 mm 2.834646 in Catalogue width (symbol unverified) 19 mm 0.748031 in	58.5 kN	48 kN	11000 rpm	12000 rpm	0.373 kg373 g
FAGNJ306-E-XL-M1Cylindrical roller bearing	Bore diameter (d) 30 mm 1.181102 in Outside diameter (D) 72 mm 2.834646 in Width (B) 19 mm 0.748031 in	61 kN	48 kN	8900 rpm	18500 rpm	0.274 kg274 g
FAGNJ306-E-XL-TVP2Cylindrical roller bearing	Bore diameter (d) 30 mm 1.181102 in Outside diameter (D) 72 mm 2.834646 in Width (B) 19 mm 0.748031 in	61 kN	48 kN	8900 rpm	14200 rpm	0.384 kg384 g
NSKNJ306EWCylindrical roller bearing	Bore diameter (d) 30 mm 1.181102 in Outside diameter (D) 72 mm 2.834646 in Bearing width (B) 19 mm 0.748031 in	65.5 kN	50 kN	—	—	—
KOYONJ306RCylindrical roller bearing	Bore diameter (d) 30 mm 1.181102 in Outside diameter (D) 72 mm 2.834646 in Width (B) 19 mm 0.748031 in	66.5 kN	50.2 kN	—	8700 rpmLimiting Speeds(Grease Lub.): 8700 min-1Limiting Speeds(Oil Lub.): 12000 min-1	0.382 kg382 g

Compare recorded seals, clearance, precision and materials

Manufacturer wording is retained. A missing property is not inferred from another brand or a similar suffix.

Brand / designation	Closure	Original precision	Clearance	Cage	Material	Lubricant
SKF NJ 306 ECJ	Without	Not recorded	CN	Sheet metal	Not recorded	None
SKF NJ 306 ECJ/C3	Without	Not recorded	C3	Sheet metal	Not recorded	None
SKF NJ 306 ECM	Without	Not recorded	CN	Machined brass	Not recorded	None
SKF NJ 306 ECML	Without	Not recorded	CN	Machined brass	Not recorded	None
SKF NJ 306 ECP	Without	Not recorded	CN	Non-metallic	Not recorded	None
SKF NJ 306 ECP/C3	Without	Not recorded	C3	Non-metallic	Not recorded	None
SKF NJ 306 ECP/C4	Without	Not recorded	C4	Non-metallic	Not recorded	None
FAG NJ306-E-XL-M1	Not recorded	PN — Normal (ISO 492:2023)	CN (Group N) — Normal internal clearance	M1 — Two Piece Brass Cage Roller Guided	Not recorded	Not recorded
FAG NJ306-E-XL-TVP2	Not recorded	PN — Normal (ISO 492:2023)	CN (Group N) — Normal internal clearance	TVP2 — Solid Window Cage made from PA66	Not recorded	Not recorded
NSK NJ306EW	Not recorded	Not recorded	Not recorded	Pressed steel	Not recorded	Not recorded
KOYO NJ306R	Not recorded	Not recorded	Not recorded	Not recorded	Not recorded	Not recorded

How to compare these values

Use the displayed dimension names and original symbols. Housing length L, height H2 and flange width are not bearing outside diameter D. A catalogue width with an unverified symbol must not be assumed to be inner-ring width B or assembly width T. Open the product record for mounting dimensions and geometry.
Inch values are calculated from the recorded millimetres using 25.4 mm per inch, rounded to six decimal places. They do not change a metric bearing into an inch-series bearing. Gram values are converted from the recorded mass in kilograms.
C and C0 describe different rating conditions. They are not a single safe working-load limit and cannot replace an application load calculation.
Reference and limiting speeds are separate catalogue values. The source grease/oil context is shown where recorded. Lubricant, seals, loads, fit, clearance and cooling affect the usable operating speed.
A common base number does not prove equivalent seals, clearance, precision, material or interchangeability. Open the full designation for these fields.

Check load calculations →Estimate rating life →Decode the complete marking →Check replacement evidence →

Related prefix matches — other model numbers may appear

These discovery results can contain a longer number or a different component. They are not specifications for the requested exact model. Open the complete product to inspect its original geometry.

SKF