Find · understand · compare

NJ 207 bearing dimensions & suffix variants

Look up recorded dimensions for designations beginning with NJ 207. The table retains complete manufacturer designations so special suffixes and different dimensional variants remain visible.

On this page5 sections

Find by measured dimensions

Enter bore d, outside diameter D and width B. Use decimals or inch fractions such as 1/2 or 1 1/4.

Exact model evidence

NJ 207 dimensions and recorded technical data

Use the named dimensions for each complete record below. A generic d×D×B answer is not asserted where the base record is missing, dimension symbols are unverified, or the product uses a different geometry such as a housing or thrust assembly. Suffix records are not substituted for a missing base specification.

The numeric series boundary is preserved: a longer number is not included merely because its first digits match. 13 recorded variants are listed. A dash means the value is missing, not zero.

Brand / full designation	Named dimensions (mm / in)	Dynamic C (kN)	Static C0 (kN)	Reference speed (rpm)	Limiting speed (rpm)	Mass (kg / g)
SKFNJ 207 ECJSingle row cylindrical roller bearing, NJ design	Bore diameter (d) 35 mm 1.377953 in Outside diameter (D) 72 mm 2.834646 in Width (B) 17 mm 0.669291 in	56 kN	48 kN	11000 rpm	12000 rpm	0.308 kg308 g
SKFNJ 207 ECJ/C3Single row cylindrical roller bearing, NJ design	Recorded bore (d) 35 mm 1.377953 in Recorded outside dimension (D) 72 mm 2.834646 in Catalogue width (symbol unverified) 17 mm 0.669291 in	56 kN	48 kN	11000 rpm	12000 rpm	0.308 kg308 g
SKFNJ 207 ECMSingle row cylindrical roller bearing, NJ design	Bore diameter (d) 35 mm 1.377953 in Outside diameter (D) 72 mm 2.834646 in Width (B) 17 mm 0.669291 in	56 kN	48 kN	11000 rpm	12000 rpm	0.355 kg355 g
SKFNJ 207 ECMLSingle row cylindrical roller bearing, NJ design	Bore diameter (d) 35 mm 1.377953 in Outside diameter (D) 72 mm 2.834646 in Width (B) 17 mm 0.669291 in	56 kN	48 kN	11000 rpm	18000 rpm	0.35 kg350 g
SKFNJ 207 ECPSingle row cylindrical roller bearing, NJ design	Bore diameter (d) 35 mm 1.377953 in Outside diameter (D) 72 mm 2.834646 in Width (B) 17 mm 0.669291 in	56 kN	48 kN	11000 rpm	12000 rpm	0.3 kg300 g
SKFNJ 207 ECP/C3Single row cylindrical roller bearing, NJ design	Recorded bore (d) 35 mm 1.377953 in Recorded outside dimension (D) 72 mm 2.834646 in Catalogue width (symbol unverified) 17 mm 0.669291 in	56 kN	48 kN	11000 rpm	12000 rpm	0.3 kg300 g
SKFNJ 207 ECPHSingle row cylindrical roller bearing, NJ design	Bore diameter (d) 35 mm 1.377953 in Outside diameter (D) 72 mm 2.834646 in Width (B) 17 mm 0.669291 in	56 kN	48 kN	11000 rpm	12000 rpm	0.308 kg308 g
SKFNJ 207 ECPH/C4Single row cylindrical roller bearing, NJ design	Recorded bore (d) 35 mm 1.377953 in Recorded outside dimension (D) 72 mm 2.834646 in Catalogue width (symbol unverified) 17 mm 0.669291 in	56 kN	48 kN	11000 rpm	12000 rpm	0.3 kg300 g
FAGNJ207-E-XL-TVP2Cylindrical roller bearing	Bore diameter (d) 35 mm 1.377953 in Outside diameter (D) 72 mm 2.834646 in Width (B) 17 mm 0.669291 in	59 kN	50 kN	8100 rpm	14100 rpm	0.295 kg295 g
FAGNJ207-E-XL-TVP2-C3Cylindrical roller bearing	Bore diameter (d) 35 mm 1.377953 in Outside diameter (D) 72 mm 2.834646 in Width (B) 17 mm 0.669291 in	59 kN	50 kN	8100 rpm	14100 rpm	0.295 kg295 g
FAGNJ207-E-XL-TVP2-C4Cylindrical roller bearing	Bore diameter (d) 35 mm 1.377953 in Outside diameter (D) 72 mm 2.834646 in Width (B) 17 mm 0.669291 in	59 kN	50 kN	8100 rpm	14100 rpm	0.295 kg295 g
NSKNJ207EWCylindrical roller bearing	Bore diameter (d) 35 mm 1.377953 in Outside diameter (D) 72 mm 2.834646 in Bearing width (B) 17 mm 0.669291 in	62 kN	50 kN	—	—	—
KOYONJ207RCylindrical roller bearing	Bore diameter (d) 35 mm 1.377953 in Outside diameter (D) 72 mm 2.834646 in Width (B) 17 mm 0.669291 in	62.9 kN	50.2 kN	—	9300 rpmLimiting Speeds(Grease Lub.): 9300 min-1Limiting Speeds(Oil Lub.): 11000 min-1	0.315 kg315 g

Compare recorded seals, clearance, precision and materials

Manufacturer wording is retained. A missing property is not inferred from another brand or a similar suffix.

Brand / designation	Closure	Original precision	Clearance	Cage	Material	Lubricant
SKF NJ 207 ECJ	Without	Not recorded	CN	Sheet metal	Not recorded	None
SKF NJ 207 ECJ/C3	Without	Not recorded	C3	Sheet metal	Not recorded	None
SKF NJ 207 ECM	Without	Not recorded	CN	Machined brass	Not recorded	None
SKF NJ 207 ECML	Without	Not recorded	CN	Machined brass	Not recorded	None
SKF NJ 207 ECP	Without	Not recorded	CN	Non-metallic	Not recorded	None
SKF NJ 207 ECP/C3	Without	Not recorded	C3	Non-metallic	Not recorded	None
SKF NJ 207 ECPH	Without	Not recorded	CN	Non-metallic	Not recorded	None
SKF NJ 207 ECPH/C4	Without	Not recorded	C4	Non-metallic	Not recorded	None
FAG NJ207-E-XL-TVP2	Not recorded	PN — Normal (ISO 492:2023)	CN (Group N) — Normal internal clearance	TVP2 — Solid Window Cage made from PA66	Not recorded	Not recorded
FAG NJ207-E-XL-TVP2-C3	Not recorded	PN — Normal (ISO 492:2023)	C3 (Group 3) — Internal clearance larger than CN	TVP2 — Solid Window Cage made from PA66	Not recorded	Not recorded
FAG NJ207-E-XL-TVP2-C4	Not recorded	PN — Normal (ISO 492:2023)	C4 (Group 4) — Internal clearance larger than C3	TVP2 — Solid Window Cage made from PA66	Not recorded	Not recorded
NSK NJ207EW	Not recorded	Not recorded	Not recorded	Pressed steel	Not recorded	Not recorded
KOYO NJ207R	Not recorded	Not recorded	Not recorded	Not recorded	Not recorded	Not recorded

How to compare these values

Use the displayed dimension names and original symbols. Housing length L, height H2 and flange width are not bearing outside diameter D. A catalogue width with an unverified symbol must not be assumed to be inner-ring width B or assembly width T. Open the product record for mounting dimensions and geometry.
Inch values are calculated from the recorded millimetres using 25.4 mm per inch, rounded to six decimal places. They do not change a metric bearing into an inch-series bearing. Gram values are converted from the recorded mass in kilograms.
C and C0 describe different rating conditions. They are not a single safe working-load limit and cannot replace an application load calculation.
Reference and limiting speeds are separate catalogue values. The source grease/oil context is shown where recorded. Lubricant, seals, loads, fit, clearance and cooling affect the usable operating speed.
A common base number does not prove equivalent seals, clearance, precision, material or interchangeability. Open the full designation for these fields.

Check load calculations →Estimate rating life →Decode the complete marking →Check replacement evidence →

Related prefix matches — other model numbers may appear

These discovery results can contain a longer number or a different component. They are not specifications for the requested exact model. Open the complete product to inspect its original geometry.

SKF