NAST30ZZ bearing dimensions & suffix variants
Look up recorded dimensions for designations beginning with NAST30ZZ. The table retains complete manufacturer designations so special suffixes and different dimensional variants remain visible.
On this page5 sections ⌄
Find by measured dimensions
Enter bore d, outside diameter D and width B. Use decimals or inch fractions such as 1/2 or 1 1/4.
NAST30ZZ dimensions and recorded technical data
Use the named dimensions for each complete record below. A generic d×D×B answer is not asserted where the base record is missing, dimension symbols are unverified, or the product uses a different geometry such as a housing or thrust assembly. Suffix records are not substituted for a missing base specification.
The numeric series boundary is preserved: a longer number is not included merely because its first digits match. 4 recorded variants are listed. A dash means the value is missing, not zero.
Catalogue parameters for NAST30ZZ
Choose the complete brand and marking before reading a value. These source-labelled records add dimensions, construction and engineering properties where they were recorded; a shared model number does not establish interchangeability.
Units, ranges and minimum/maximum qualifiers are retained. The data is a dated catalogue reference, not a certified drawing, a complete current specification or an operating approval.
IKO NAST30ZZ — 7 recorded parameters
Separable roller follower with cage and inner ring; cylindrical outer ring; shield type
Reference: IKO Roller Followers catalogue, I93–I94 (PDF page 6); source snapshot 2026-10-03.
NAST30ZZ has a 30 mm bore, 62 mm running diameter and 25 mm inner-ring width; outer-ring width is 24.8 mm. Do not use the narrower outer-ring measurement as overall bearing width.
The catalogue separates ZZ shields from ZZUU seals and R crowned profiles. Check the complete marking and lubrication arrangement before using a dimension match.
Manufacturer dimension table
| Parameter | Source symbol | Recorded value |
|---|---|---|
| Inner-ring bore | d | 30 mm |
| Outside running diameter | D | 62 mm |
| Inner-ring width | B | 25 mm |
| Outer-ring width | C | 24.8 mm |
| Reference mass | Not separately recorded | 400 g |
| Basic dynamic load rating | C | 30,500 N |
| Basic static load rating | C0 | 45,400 N |
No recorded variant matches these filters. Clear a filter to see other records; no substitute has been inferred.
| Brand / full designation | Named dimensions (mm / in) | Dynamic C (kN) | Static C0 (kN) | Reference speed (rpm) | Limiting speed (rpm) | Mass (kg / g) |
|---|---|---|---|---|---|---|
| IKONAST30ZZRoller follower |
| 30.5 kN | 45.4 kN | 2800 rpm | 4667 rpm | 0.4 kg400 g |
| IKONAST30ZZRRoller follower |
| 30.5 kN | 45.4 kN | 2800 rpm | 4667 rpm | 0.4 kg400 g |
| IKONAST30ZZUURoller follower |
| 30.5 kN | 45.4 kN | 2800 rpm | 4667 rpm | 0.4 kg400 g |
| IKONAST30ZZUURRoller follower |
| 30.5 kN | 45.4 kN | 2800 rpm | 4667 rpm | 0.4 kg400 g |
Compare recorded seals, clearance, precision and materials
Manufacturer wording is retained. A missing property is not inferred from another brand or a similar suffix.
| Brand / designation | Closure | Original precision | Clearance | Cage | Material | Lubricant |
|---|---|---|---|---|---|---|
| IKO NAST30ZZ | Not recorded | JIS, Class 0 | Not recorded | Steel | High Carbon Chrome Steel | Not recorded |
| IKO NAST30ZZR | Not recorded | JIS, Class 0 | Not recorded | Steel | High Carbon Chrome Steel | Not recorded |
| IKO NAST30ZZUU | Not recorded | JIS, Class 0 | Not recorded | Steel | High Carbon Chrome Steel | Not recorded |
| IKO NAST30ZZUUR | Not recorded | JIS, Class 0 | Not recorded | Steel | High Carbon Chrome Steel | Not recorded |
How to compare these values
- Use the displayed dimension names and original symbols. Housing length L, height H2 and flange width are not bearing outside diameter D. A catalogue width with an unverified symbol must not be assumed to be inner-ring width B or assembly width T. Open the product record for mounting dimensions and geometry.
- Inch values are calculated from the recorded millimetres using 25.4 mm per inch, rounded to six decimal places. They do not change a metric bearing into an inch-series bearing. Gram values are converted from the recorded mass in kilograms.
- C and C0 describe different rating conditions. They are not a single safe working-load limit and cannot replace an application load calculation.
- Reference and limiting speeds are separate catalogue values. The source grease/oil context is shown where recorded. Lubricant, seals, loads, fit, clearance and cooling affect the usable operating speed.
- A common base number does not prove equivalent seals, clearance, precision, material or interchangeability. Open the full designation for these fields.
Related prefix matches — other model numbers may appear
These discovery results can contain a longer number or a different component. They are not specifications for the requested exact model. Open the complete product to inspect its original geometry.
Check the drawing before substituting
Nominal dimensions are not shaft-fit tolerances. Different variants can add grooves, flanges, wider rings or assembly components. When the table has different dimensions, the complete designation—not the shared prefix—controls.
Reference basis & data limits
Manufacturer terminology is retained in the product records. Technical reference basis: JTEKT Basic Bearing Knowledge (boundary dimensions, tolerance classes and lubrication); NSK Bearing ABCs (lubrication, designations and clearance); NTN technical FAQs (closure codes and component interchange); SKF rolling-bearing selection and maintenance references.
Selection workflows and catalogue grouping are BearingScope editorial aids. Verify the current drawing and application requirements before using a candidate. Missing database information is not converted into an assumed match.