NA4902 bearing dimensions & suffix variants
Look up recorded dimensions for designations beginning with NA4902. The table retains complete manufacturer designations so special suffixes and different dimensional variants remain visible.
On this page5 sections ⌄
Find by measured dimensions
Enter bore d, outside diameter D and width B. Use decimals or inch fractions such as 1/2 or 1 1/4.
NA4902 dimensions and recorded technical data
The recorded NA4902 base designation measures 15×28×13 mm (inside diameter d × outside diameter D × width B). This answer uses unsuffixed records from SKF. It does not assign the same dimensions or operating ratings to every suffix.
The numeric series boundary is preserved: a longer number is not included merely because its first digits match. 11 recorded variants are listed. A dash means the value is missing, not zero.
Catalogue parameters for NA4902
Choose the complete brand and marking before reading a value. These source-labelled records add dimensions, construction and engineering properties where they were recorded; a shared model number does not establish interchangeability.
Units, ranges and minimum/maximum qualifiers are retained. The data is a dated catalogue reference, not a certified drawing, a complete current specification or an operating approval.
SKF NA 4902 — 35 recorded parameters
Single row needle roller bearing with machined rings, with flanges
Reference: SKF product catalogue; source snapshot 2026-09-02.
This can be a unit or housing record. Bolt spacing, housing envelope, centre height and the insert identity need separate checks; do not interpret every outside dimension as bearing D.
Values shown are retained from the recorded source. Zero boundary dimensions and zero load ratings from incomplete legacy feeds are withheld rather than presented as usable specifications.
Dimensions
| Parameter | Source symbol | Recorded value |
|---|---|---|
| Bore diameter | Not separately recorded | 15.0 mm |
| Outside diameter | Not separately recorded | 28.0 mm |
| Width | Not separately recorded | 13.0 mm |
Performance
| Parameter | Source symbol | Recorded value |
|---|---|---|
| Basic dynamic load rating | Not separately recorded | 11.2 kN |
| Basic static load rating | Not separately recorded | 15.3 kN |
| Reference speed | Not separately recorded | 19000.0 r/min |
| Limiting speed | Not separately recorded | 22000.0 r/min |
Properties
| Parameter | Source symbol | Recorded value |
|---|---|---|
| Bearing part | Not separately recorded | Complete bearing |
| Number of rows | Not separately recorded | 1 |
| Outer ring type | Not separately recorded | Machined (solid) |
| Aligning feature | Not separately recorded | Without |
| Cage | Not separately recorded | Sheet metal |
| Number of flanges, outer ring | Not separately recorded | 2 |
| Radial internal clearance | Not separately recorded | CN |
| Tolerance class | Not separately recorded | Normal |
| Material, bearing | Not separately recorded | Bearing steel |
| Coating | Not separately recorded | Without |
| Sealing | Not separately recorded | Without |
| Relubrication feature | Not separately recorded | With |
| Indicative carbon footprint for new product | Not separately recorded | 0.13 kg CO 2 e |
Logistics
| Parameter | Source symbol | Recorded value |
|---|---|---|
| Product net weight | Not separately recorded | 0.034 kg |
Engineering — Dimensions
| Parameter | Source symbol | Recorded value |
|---|---|---|
| Bore diameter | d | 15 mm |
| Outside diameter | D | 28 mm |
| Width | B | 13 mm |
| Raceway diameter inner ring | F | 20 mm |
| Chamfer dimension outer ring | r 1,2 | min. 0.3 mm |
| Permissible axial displacement from the normal position of one bearing ring relative to the other | s | max. 0.5 mm |
Engineering — Abutment dimensions
| Parameter | Source symbol | Recorded value |
|---|---|---|
| Smallest permissible abutment diameter shaft, bearings with flanges | d a | min. 17 mm |
| Diameter of housing abutment | D a | max. 26 mm |
| Fillet radius | r a | max. 0.3 mm |
Engineering — Calculation data
| Parameter | Source symbol | Recorded value |
|---|---|---|
| Basic dynamic load rating | C | 11.2 kN |
| Basic static load rating | C 0 | 15.3 kN |
| Fatigue load limit | P u | 1.83 kN |
| Reference speed | Not separately recorded | 19000 r/min |
| Limiting speed | Not separately recorded | 22000 r/min |
No recorded variant matches these filters. Clear a filter to see other records; no substitute has been inferred.
| Brand / full designation | Named dimensions (mm / in) | Dynamic C (kN) | Static C0 (kN) | Reference speed (rpm) | Limiting speed (rpm) | Mass (kg / g) |
|---|---|---|---|---|---|---|
| SKFNA 4902Single row needle roller bearing with machined rings, with flanges |
| 11.2 kN | 15.3 kN | 19000 rpm | 22000 rpm | 0.034 kg34 g |
| IKONA4902Needle roller bearing |
| 10.9 kN | 13.8 kN | 12000 rpm | 20000 rpm | 0.034972 kg34.972 g |
| SKFNA 4902.2RSSingle row needle roller bearing with machined rings, with flanges and integral sealing |
| 9.13 kN | 12 kN | — | 9500 rpm | 0.0355 kg35.5 g |
| SKFNA 4902 RSSingle row needle roller bearing with machined rings, with flanges and integral sealing |
| 9.13 kN | 12 kN | — | 9500 rpm | 0.037 kg37 g |
| INANA4902-2RSR-XLNeedle roller bearing |
| 9.7 kN | 10.3 kN | — | — | 0.036 kg36 g |
| INANA4902-2RSR-XL-C2Needle roller bearing |
| 9.7 kN | 10.3 kN | — | — | 0.037 kg37 g |
| INANA4902-RSR-XLNeedle roller bearing |
| 9.7 kN | 10.3 kN | — | — | 0.036 kg36 g |
| INANA4902-XLNeedle roller bearing |
| 12 kN | 13.6 kN | 11200 rpm | 21100 rpm | 0.035 kg35 g |
| INANA4902-XL-C3Needle roller bearing |
| 12 kN | 13.6 kN | 11200 rpm | 21100 rpm | 0.03538 kg35.38 g |
| INANA4902-XL-C4Needle roller bearing |
| 12 kN | 13.6 kN | 11200 rpm | 21100 rpm | 0.03531 kg35.31 g |
| IKONA4902UUNeedle roller bearing |
| 9.57 kN | 11.6 kN | 9500 rpm | — | 0.03597 kg35.97 g |
Compare recorded seals, clearance, precision and materials
Manufacturer wording is retained. A missing property is not inferred from another brand or a similar suffix.
| Brand / designation | Closure | Original precision | Clearance | Cage | Material | Lubricant |
|---|---|---|---|---|---|---|
| SKF NA 4902 | Without | Not recorded | CN | Sheet metal | Bearing steel | None |
| IKO NA4902 | Not recorded | JIS, Class 0 | Not recorded | Steel | High Carbon Chrome Steel | Not recorded |
| SKF NA 4902.2RS | Seal on both sides | Not recorded | CN | Sheet metal | Bearing steel | Grease |
| SKF NA 4902 RS | Seal on one side | Not recorded | CN | Sheet metal | Bearing steel | Grease |
| INA NA4902-2RSR-XL | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| INA NA4902-2RSR-XL-C2 | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| INA NA4902-RSR-XL | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| INA NA4902-XL | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| INA NA4902-XL-C3 | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| INA NA4902-XL-C4 | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| IKO NA4902UU | Not recorded | JIS, Class 0 | Not recorded | Steel | High Carbon Chrome Steel | Not recorded |
How to compare these values
- Use the displayed dimension names and original symbols. Housing length L, height H2 and flange width are not bearing outside diameter D. A catalogue width with an unverified symbol must not be assumed to be inner-ring width B or assembly width T. Open the product record for mounting dimensions and geometry.
- Inch values are calculated from the recorded millimetres using 25.4 mm per inch, rounded to six decimal places. They do not change a metric bearing into an inch-series bearing. Gram values are converted from the recorded mass in kilograms.
- C and C0 describe different rating conditions. They are not a single safe working-load limit and cannot replace an application load calculation.
- Reference and limiting speeds are separate catalogue values. The source grease/oil context is shown where recorded. Lubricant, seals, loads, fit, clearance and cooling affect the usable operating speed.
- A common base number does not prove equivalent seals, clearance, precision, material or interchangeability. Open the full designation for these fields.
Related prefix matches — other model numbers may appear
These discovery results can contain a longer number or a different component. They are not specifications for the requested exact model. Open the complete product to inspect its original geometry.
NA4902
Needle roller bearing
View full technical record →SKFNA 4902
Single row needle roller bearing with machined rings, with flanges
View full technical record →SKFNA 4902.2RS
Single row needle roller bearing with machined rings, with flanges and integral sealing
View full technical record →INANA4902-2RSR-XL
Needle roller bearing
View full technical record →INANA4902-2RSR-XL-C2
Needle roller bearing
View full technical record →SKFNA 4902 RS
Single row needle roller bearing with machined rings, with flanges and integral sealing
View full technical record →INANA4902-RSR-XL
Needle roller bearing
View full technical record →IKONA4902UU
Needle roller bearing
View full technical record →INANA4902-XL
Needle roller bearing
View full technical record →INANA4902-XL-C3
Needle roller bearing
View full technical record →INANA4902-XL-C4
Needle roller bearing
View full technical record →Check the drawing before substituting
Nominal dimensions are not shaft-fit tolerances. Different variants can add grooves, flanges, wider rings or assembly components. When the table has different dimensions, the complete designation—not the shared prefix—controls.
Reference basis & data limits
Manufacturer terminology is retained in the product records. Technical reference basis: JTEKT Basic Bearing Knowledge (boundary dimensions, tolerance classes and lubrication); NSK Bearing ABCs (lubrication, designations and clearance); NTN technical FAQs (closure codes and component interchange); SKF rolling-bearing selection and maintenance references.
Selection workflows and catalogue grouping are BearingScope editorial aids. Verify the current drawing and application requirements before using a candidate. Missing database information is not converted into an assumed match.