99,016 bearing records · search, filter and compare

Find · understand · compare

7317 bearing dimensions & suffix variants

Look up recorded dimensions for designations beginning with 7317. The table retains complete manufacturer designations so special suffixes and different dimensional variants remain visible.

On this page5 sections

Find by measured dimensions

Enter bore d, outside diameter D and width B. Use decimals or inch fractions such as 1/2 or 1 1/4.

For tapered assemblies use total width T; for units or flanged bearings also check the mounting drawing.

Exact model evidence

7317 dimensions and recorded technical data

The recorded 7317 base designation measures 85×180×41 mm (inside diameter d × outside diameter D × width B). This answer uses unsuffixed records from KOYO. It does not assign the same dimensions or operating ratings to every suffix.

The numeric series boundary is preserved: a longer number is not included merely because its first digits match. 61 recorded variants are listed. A dash means the value is missing, not zero.

Exact designation reference

Catalogue parameters for 7317

Choose the complete brand and marking before reading a value. These source-labelled records add dimensions, construction and engineering properties where they were recorded; a shared model number does not establish interchangeability.

Units, ranges and minimum/maximum qualifiers are retained. The data is a dated catalogue reference, not a certified drawing, a complete current specification or an operating approval.

KOYO 7317 — 15 recorded parameters

Angular contact ball bearing

Reference: JTEKT / Koyo catalogue; source snapshot 2026-09-02.

Read the complete suffix and recorded construction. Similar dimensions do not prove identical seals, clearance, precision or material.

Values shown are retained from the recorded source. Zero boundary dimensions and zero load ratings from incomplete legacy feeds are withheld rather than presented as usable specifications.

Technical Data

ParameterSource symbolRecorded value
dNot separately recorded85 mm
DNot separately recorded180 mm
BNot separately recorded41 mm
R(Min.)Not separately recorded3 mm
R1(Min.)Not separately recorded1.1 mm
Basic Load Ratings : CrNot separately recorded198 kN
Basic Load Ratings : C0RNot separately recorded133 kN
Fatigue Load Limit : CuNot separately recorded7.95 kN
Limiting Speeds(Grease Lub.)Not separately recorded3500 min-1
Limiting Speeds(Oil Lub.)Not separately recorded4400 min-1
Load Center Spread : ANot separately recorded58.8 mm
Da(Min.)Not separately recorded99 mm
Da(Max.)Not separately recorded166 mm
Ra(Max.)Not separately recorded2.5 mm
Mass(Refer.)Not separately recorded4.53 kg
Open KOYO 7317 product record →
Brand / full designationNamed dimensions (mm / in)Dynamic C (kN)Static C0 (kN)Reference speed (rpm)Limiting speed (rpm)Mass (kg / g)
KOYO7317Angular contact ball bearing
Bore diameter (d)
85 mm
3.346457 in
Outside diameter (D)
180 mm
7.086614 in
Width (B)
41 mm
1.614173 in
198 kN133 kN—3500 rpmLimiting Speeds(Grease Lub.): 3500 min-1Limiting Speeds(Oil Lub.): 4400 min-14.53 kg4530 g
SKF7317 BECBFSingle row angular contact ball bearing
Bore diameter (d)
85 mm
3.346457 in
Outside diameter (D)
180 mm
7.086614 in
Width (B)
41 mm
1.614173 in
146 kN122 kN4800 rpm4300 rpm4.7 kg4700 g
SKF7317 BECBJSingle row angular contact ball bearing
Bore diameter (d)
85 mm
3.346457 in
Outside diameter (D)
180 mm
7.086614 in
Width (B)
41 mm
1.614173 in
156 kN132 kN4800 rpm4800 rpm4.43 kg4430 g
SKF7317 BECBMSingle row angular contact ball bearing
Bore diameter (d)
85 mm
3.346457 in
Outside diameter (D)
180 mm
7.086614 in
Width (B)
41 mm
1.614173 in
156 kN132 kN4800 rpm6300 rpm4.58 kg4580 g
SKF7317 BECBPSingle row angular contact ball bearing
Bore diameter (d)
85 mm
3.346457 in
Outside diameter (D)
180 mm
7.086614 in
Width (B)
41 mm
1.614173 in
156 kN132 kN4800 rpm4800 rpm4.26 kg4260 g
SKF7317 BECBYSingle row angular contact ball bearing
Bore diameter (d)
85 mm
3.346457 in
Outside diameter (D)
180 mm
7.086614 in
Width (B)
41 mm
1.614173 in
156 kN132 kN4800 rpm4800 rpm4.43 kg4430 g
SKF7317 BECCMSingle row angular contact ball bearing
Bore diameter (d)
85 mm
3.346457 in
Outside diameter (D)
180 mm
7.086614 in
Width (B)
41 mm
1.614173 in
156 kN132 kN4800 rpm6300 rpm4.58 kg4580 g
SKF7317 BEGAFSingle row angular contact ball bearing
Bore diameter (d)
85 mm
3.346457 in
Outside diameter (D)
180 mm
7.086614 in
Width (B)
41 mm
1.614173 in
146 kN122 kN4800 rpm4300 rpm4.7 kg4700 g
SKF7317 BEGAMSingle row angular contact ball bearing
Bore diameter (d)
85 mm
3.346457 in
Outside diameter (D)
180 mm
7.086614 in
Width (B)
41 mm
1.614173 in
156 kN132 kN4800 rpm6300 rpm4.58 kg4580 g
SKF7317 BEGAPSingle row angular contact ball bearing
Bore diameter (d)
85 mm
3.346457 in
Outside diameter (D)
180 mm
7.086614 in
Width (B)
41 mm
1.614173 in
156 kN132 kN4800 rpm4800 rpm4.26 kg4260 g
SKF7317 BEGAPHSingle row angular contact ball bearing
Bore diameter (d)
85 mm
3.346457 in
Outside diameter (D)
180 mm
7.086614 in
Width (B)
41 mm
1.614173 in
156 kN132 kN4800 rpm4800 rpm4.26 kg4260 g
SKF7317 BEN1GAMSingle row angular contact ball bearing
Recorded bore (d)
85 mm
3.346457 in
Recorded outside dimension (D)
180 mm
7.086614 in
Catalogue width (symbol unverified)
41 mm
1.614173 in
156 kN132 kN4800 rpm6300 rpm4.58 kg4580 g
SKF7317 BEPSingle row angular contact ball bearing
Bore diameter (d)
85 mm
3.346457 in
Outside diameter (D)
180 mm
7.086614 in
Width (B)
41 mm
1.614173 in
146 kN122 kN4800 rpm4300 rpm4.26 kg4260 g
FAG7317-B-XL-FP-UOAngular contact ball bearing
Bore diameter (d)
85 mm
3.346457 in
Outside diameter (D)
180 mm
7.086614 in
Width (B)
41 mm
1.614173 in
167 kN138 kN4100 rpm4900 rpm4.677 kg4677 g
FAG7317-B-XL-JPAngular contact ball bearing
Bore diameter (d)
85 mm
3.346457 in
Outside diameter (D)
180 mm
7.086614 in
Width (B)
41 mm
1.614173 in
167 kN138 kN4100 rpm4900 rpm4.497 kg4497 g
FAG7317-B-XL-JP-UAAngular contact ball bearing
Bore diameter (d)
85 mm
3.346457 in
Outside diameter (D)
180 mm
7.086614 in
Width (B)
41 mm
1.614173 in
167 kN138 kN4100 rpm4900 rpm4.497 kg4497 g
FAG7317-B-XL-JP-UOAngular contact ball bearing
Bore diameter (d)
85 mm
3.346457 in
Outside diameter (D)
180 mm
7.086614 in
Width (B)
41 mm
1.614173 in
167 kN138 kN4100 rpm4900 rpm4.4 kg4400 g
FAG7317-B-XL-MPAngular contact ball bearing
Bore diameter (d)
85 mm
3.346457 in
Outside diameter (D)
180 mm
7.086614 in
Width (B)
41 mm
1.614173 in
167 kN138 kN4100 rpm6400 rpm4.8 kg4800 g
FAG7317-B-XL-MP-P5-UOAngular contact ball bearing
Bore diameter (d)
85 mm
3.346457 in
Outside diameter (D)
180 mm
7.086614 in
Width (B)
41 mm
1.614173 in
167 kN138 kN4100 rpm6400 rpm4.9 kg4900 g
FAG7317-B-XL-MP-UAAngular contact ball bearing
Bore diameter (d)
85 mm
3.346457 in
Outside diameter (D)
180 mm
7.086614 in
Width (B)
41 mm
1.614173 in
167 kN138 kN4100 rpm6400 rpm4.8 kg4800 g
FAG7317-B-XL-MP-UBAngular contact ball bearing
Bore diameter (d)
85 mm
3.346457 in
Outside diameter (D)
180 mm
7.086614 in
Width (B)
41 mm
1.614173 in
167 kN138 kN4100 rpm6400 rpm4.859 kg4859 g
FAG7317-B-XL-MP-UOAngular contact ball bearing
Bore diameter (d)
85 mm
3.346457 in
Outside diameter (D)
180 mm
7.086614 in
Width (B)
41 mm
1.614173 in
167 kN138 kN4100 rpm6400 rpm4.859 kg4859 g
FAG7317-B-XL-TVPAngular contact ball bearing
Bore diameter (d)
85 mm
3.346457 in
Outside diameter (D)
180 mm
7.086614 in
Width (B)
41 mm
1.614173 in
167 kN138 kN4100 rpm4900 rpm4.26 kg4260 g
FAG7317-B-XL-TVP-UAAngular contact ball bearing
Bore diameter (d)
85 mm
3.346457 in
Outside diameter (D)
180 mm
7.086614 in
Width (B)
41 mm
1.614173 in
167 kN138 kN4100 rpm4900 rpm4.26 kg4260 g
FAG7317-B-XL-TVP-UBAngular contact ball bearing
Bore diameter (d)
85 mm
3.346457 in
Outside diameter (D)
180 mm
7.086614 in
Width (B)
41 mm
1.614173 in
167 kN138 kN4100 rpm4900 rpm4.26 kg4260 g
FAG7317-B-XL-TVP-UOAngular contact ball bearing
Bore diameter (d)
85 mm
3.346457 in
Outside diameter (D)
180 mm
7.086614 in
Width (B)
41 mm
1.614173 in
167 kN138 kN4100 rpm4900 rpm4.308 kg4308 g
TIMKEN7317WNAngular contact ball bearing
Recorded bore (d)
85 mm
3.346457 in
Recorded outside dimension (D)
180 mm
7.086614 in
Catalogue width (symbol unverified)
41 mm
1.614173 in
145 kN122 kN——4.94 kg4940 g
TIMKEN7317WNMBRSUAngular contact ball bearing
Recorded bore (d)
85 mm
3.346457 in
Recorded outside dimension (D)
180 mm
7.086614 in
Catalogue width (symbol unverified)
41 mm
1.614173 in
145 kN122 kN——4.62 kg4620 g
TIMKEN7317WNSUAngular contact ball bearing
Recorded bore (d)
85 mm
3.346457 in
Recorded outside dimension (D)
180 mm
7.086614 in
Catalogue width (symbol unverified)
41 mm
1.614173 in
145 kN122 kN——4.94 kg4940 g
NSK7317AWAngular contact ball bearing
Bore diameter (d)
85 mm
3.346457 in
Outside diameter (D)
180 mm
7.086614 in
Individual bearing width (B)
41 mm
1.614173 in
175 kN133 kN——4.33 kg4330 g
NSK7317AWDBAngular contact ball bearing
Bore diameter (d)
85 mm
3.346457 in
Outside diameter (D)
180 mm
7.086614 in
Catalogue width (symbol unverified)
82 mm
3.228346 in
284 kN265 kN———
NSK7317AWDFAngular contact ball bearing
Bore diameter (d)
85 mm
3.346457 in
Outside diameter (D)
180 mm
7.086614 in
Catalogue width (symbol unverified)
82 mm
3.228346 in
284 kN265 kN———
NSK7317AWDTAngular contact ball bearing
Bore diameter (d)
85 mm
3.346457 in
Outside diameter (D)
180 mm
7.086614 in
Catalogue width (symbol unverified)
82 mm
3.228346 in
284 kN265 kN———
NSK7317BEAT85Angular contact ball bearing
Bore diameter (d)
85 mm
3.346457 in
Outside diameter (D)
180 mm
7.086614 in
Individual bearing width (B)
41 mm
1.614173 in
172 kN133 kN——4.34 kg4340 g
NSK7317BWAngular contact ball bearing
Bore diameter (d)
85 mm
3.346457 in
Outside diameter (D)
180 mm
7.086614 in
Individual bearing width (B)
41 mm
1.614173 in
160 kN122 kN——4.42 kg4420 g
NSK7317BWDBAngular contact ball bearing
Bore diameter (d)
85 mm
3.346457 in
Outside diameter (D)
180 mm
7.086614 in
Catalogue width (symbol unverified)
82 mm
3.228346 in
260 kN244 kN———
NSK7317BWDFAngular contact ball bearing
Bore diameter (d)
85 mm
3.346457 in
Outside diameter (D)
180 mm
7.086614 in
Catalogue width (symbol unverified)
82 mm
3.228346 in
260 kN244 kN———
NSK7317BWDTAngular contact ball bearing
Bore diameter (d)
85 mm
3.346457 in
Outside diameter (D)
180 mm
7.086614 in
Catalogue width (symbol unverified)
82 mm
3.228346 in
260 kN244 kN———
KOYO7317BAngular contact ball bearing
Bore diameter (d)
85 mm
3.346457 in
Outside diameter (D)
180 mm
7.086614 in
Width (B)
41 mm
1.614173 in
182 kN122 kN—2600 rpmLimiting Speeds(Grease Lub.): 2600 min-1Limiting Speeds(Oil Lub.): 3500 min-14.53 kg4530 g
KOYO7317BDBAngular contact ball bearing
Bore diameter (d)
85 mm
3.346457 in
Outside diameter (D)
180 mm
7.086614 in
Width (B)
82 mm
3.228346 in
295 kN244 kN—2100 rpmLimiting Speeds(Grease Lub.): 2100 min-1Limiting Speeds(Oil Lub.): 2800 min-19.06 kg9060 g
KOYO7317BDB FYAngular contact ball bearing
Bore diameter (d)
85 mm
3.346457 in
Outside diameter (D)
180 mm
7.086614 in
Width (B)
82 mm
3.228346 in
279 kN223 kN—2700 rpmLimiting Speeds(Grease Lub.): 2700 min-1Limiting Speeds(Oil Lub.): 3500 min-19.06 kg9060 g
KOYO7317BDFAngular contact ball bearing
Bore diameter (d)
85 mm
3.346457 in
Outside diameter (D)
180 mm
7.086614 in
Width (B)
82 mm
3.228346 in
295 kN244 kN—2100 rpmLimiting Speeds(Grease Lub.): 2100 min-1Limiting Speeds(Oil Lub.): 2800 min-19.06 kg9060 g
KOYO7317BDF FYAngular contact ball bearing
Bore diameter (d)
85 mm
3.346457 in
Outside diameter (D)
180 mm
7.086614 in
Width (B)
82 mm
3.228346 in
279 kN223 kN—2700 rpmLimiting Speeds(Grease Lub.): 2700 min-1Limiting Speeds(Oil Lub.): 3500 min-19.06 kg9060 g
KOYO7317BDTAngular contact ball bearing
Bore diameter (d)
85 mm
3.346457 in
Outside diameter (D)
180 mm
7.086614 in
Width (B)
82 mm
3.228346 in
295 kN244 kN—2100 rpmLimiting Speeds(Grease Lub.): 2100 min-1Limiting Speeds(Oil Lub.): 2800 min-19.06 kg9060 g
KOYO7317BDT FYAngular contact ball bearing
Bore diameter (d)
85 mm
3.346457 in
Outside diameter (D)
180 mm
7.086614 in
Width (B)
82 mm
3.228346 in
279 kN223 kN—2700 rpmLimiting Speeds(Grease Lub.): 2700 min-1Limiting Speeds(Oil Lub.): 3500 min-19.06 kg9060 g
KOYO7317B FYAngular contact ball bearing
Bore diameter (d)
85 mm
3.346457 in
Outside diameter (D)
180 mm
7.086614 in
Width (B)
41 mm
1.614173 in
172 kN112 kN—3300 rpmLimiting Speeds(Grease Lub.): 3300 min-1Limiting Speeds(Oil Lub.): 4400 min-14.53 kg4530 g
KOYO7317CAngular contact ball bearing
Bore diameter (d)
85 mm
3.346457 in
Outside diameter (D)
180 mm
7.086614 in
Width (B)
41 mm
1.614173 in
213 kN142 kN—4800 rpmLimiting Speeds(Grease Lub.): 4800 min-1Limiting Speeds(Oil Lub.): 6400 min-14.53 kg4530 g
KOYO7317CDBAngular contact ball bearing
Bore diameter (d)
85 mm
3.346457 in
Outside diameter (D)
180 mm
7.086614 in
Width (B)
82 mm
3.228346 in
346 kN284 kN—3900 rpmLimiting Speeds(Grease Lub.): 3900 min-1Limiting Speeds(Oil Lub.): 5200 min-19.06 kg9060 g
KOYO7317CDB FYAngular contact ball bearing
Bore diameter (d)
85 mm
3.346457 in
Outside diameter (D)
180 mm
7.086614 in
Width (B)
82 mm
3.228346 in
326 kN261 kN—4900 rpmLimiting Speeds(Grease Lub.): 4900 min-1Limiting Speeds(Oil Lub.): 6500 min-19.06 kg9060 g
KOYO7317CDFAngular contact ball bearing
Bore diameter (d)
85 mm
3.346457 in
Outside diameter (D)
180 mm
7.086614 in
Width (B)
82 mm
3.228346 in
346 kN284 kN—3900 rpmLimiting Speeds(Grease Lub.): 3900 min-1Limiting Speeds(Oil Lub.): 5200 min-19.06 kg9060 g
KOYO7317CDF FYAngular contact ball bearing
Bore diameter (d)
85 mm
3.346457 in
Outside diameter (D)
180 mm
7.086614 in
Width (B)
82 mm
3.228346 in
326 kN261 kN—4900 rpmLimiting Speeds(Grease Lub.): 4900 min-1Limiting Speeds(Oil Lub.): 6500 min-19.06 kg9060 g
KOYO7317CDTAngular contact ball bearing
Bore diameter (d)
85 mm
3.346457 in
Outside diameter (D)
180 mm
7.086614 in
Width (B)
82 mm
3.228346 in
346 kN284 kN—3900 rpmLimiting Speeds(Grease Lub.): 3900 min-1Limiting Speeds(Oil Lub.): 5200 min-19.06 kg9060 g
KOYO7317CDT FYAngular contact ball bearing
Bore diameter (d)
85 mm
3.346457 in
Outside diameter (D)
180 mm
7.086614 in
Width (B)
82 mm
3.228346 in
326 kN261 kN—4900 rpmLimiting Speeds(Grease Lub.): 4900 min-1Limiting Speeds(Oil Lub.): 6500 min-19.06 kg9060 g
KOYO7317C FYAngular contact ball bearing
Bore diameter (d)
85 mm
3.346457 in
Outside diameter (D)
180 mm
7.086614 in
Width (B)
41 mm
1.614173 in
201 kN130 kN—6100 rpmLimiting Speeds(Grease Lub.): 6100 min-1Limiting Speeds(Oil Lub.): 8100 min-14.53 kg4530 g
KOYO7317DBAngular contact ball bearing
Bore diameter (d)
85 mm
3.346457 in
Outside diameter (D)
180 mm
7.086614 in
Width (B)
82 mm
3.228346 in
322 kN265 kN—2800 rpmLimiting Speeds(Grease Lub.): 2800 min-1Limiting Speeds(Oil Lub.): 3500 min-19.06 kg9060 g
KOYO7317DB FYAngular contact ball bearing
Bore diameter (d)
85 mm
3.346457 in
Outside diameter (D)
180 mm
7.086614 in
Width (B)
82 mm
3.228346 in
304 kN243 kN—3500 rpmLimiting Speeds(Grease Lub.): 3500 min-1Limiting Speeds(Oil Lub.): 4400 min-19.06 kg9060 g
KOYO7317DFAngular contact ball bearing
Bore diameter (d)
85 mm
3.346457 in
Outside diameter (D)
180 mm
7.086614 in
Width (B)
82 mm
3.228346 in
322 kN265 kN—2800 rpmLimiting Speeds(Grease Lub.): 2800 min-1Limiting Speeds(Oil Lub.): 3500 min-19.06 kg9060 g
KOYO7317DF FYAngular contact ball bearing
Bore diameter (d)
85 mm
3.346457 in
Outside diameter (D)
180 mm
7.086614 in
Width (B)
82 mm
3.228346 in
304 kN243 kN—3500 rpmLimiting Speeds(Grease Lub.): 3500 min-1Limiting Speeds(Oil Lub.): 4400 min-19.06 kg9060 g
KOYO7317DTAngular contact ball bearing
Bore diameter (d)
85 mm
3.346457 in
Outside diameter (D)
180 mm
7.086614 in
Width (B)
82 mm
3.228346 in
322 kN265 kN—2800 rpmLimiting Speeds(Grease Lub.): 2800 min-1Limiting Speeds(Oil Lub.): 3500 min-19.06 kg9060 g
KOYO7317DT FYAngular contact ball bearing
Bore diameter (d)
85 mm
3.346457 in
Outside diameter (D)
180 mm
7.086614 in
Width (B)
82 mm
3.228346 in
304 kN243 kN—3500 rpmLimiting Speeds(Grease Lub.): 3500 min-1Limiting Speeds(Oil Lub.): 4400 min-19.06 kg9060 g
KOYO7317 FYAngular contact ball bearing
Bore diameter (d)
85 mm
3.346457 in
Outside diameter (D)
180 mm
7.086614 in
Width (B)
41 mm
1.614173 in
187 kN122 kN—4400 rpmLimiting Speeds(Grease Lub.): 4400 min-1Limiting Speeds(Oil Lub.): 5500 min-14.53 kg4530 g
Compare recorded seals, clearance, precision and materials

Manufacturer wording is retained. A missing property is not inferred from another brand or a similar suffix.

Brand / designationClosureOriginal precisionClearanceCageMaterialLubricant
KOYO 7317Not recordedNot recordedNot recordedNot recordedNot recordedNot recorded
SKF 7317 BECBFWithoutP6Not recordedMachined steelBearing steelNone
SKF 7317 BECBJWithoutP6Not recordedSteel sheet metalBearing steelNone
SKF 7317 BECBMWithoutP6Not recordedMachined brassBearing steelNone
SKF 7317 BECBPWithoutP6Not recordedNon-metallicBearing steelNone
SKF 7317 BECBYWithoutP6Not recordedBrass sheet metalBearing steelNone
SKF 7317 BECCMWithoutP6Not recordedMachined brassBearing steelNone
SKF 7317 BEGAFWithoutP6Not recordedMachined steelBearing steelNone
SKF 7317 BEGAMWithoutP6Not recordedMachined brassBearing steelNone
SKF 7317 BEGAPWithoutP6Not recordedNon-metallicBearing steelNone
SKF 7317 BEGAPHWithoutP6Not recordedNon-metallicBearing steelNone
SKF 7317 BEN1GAMWithoutNot recordedNot recordedMachined brassBearing steelNot recorded
SKF 7317 BEPWithoutNormalNot recordedNon-metallicBearing steelNone
FAG 7317-B-XL-FP-UOWithout — Not sealedPN — Normal (ISO 492:2023)Not recordedFP — Solid steel cage, ball guidedNot recordedWithout — Bearing not greased
FAG 7317-B-XL-JPWithout — Not sealedPN — Normal (ISO 492:2023)Not recordedJP — Steel sheet metalNot recordedWithout — Bearing not greased
FAG 7317-B-XL-JP-UAWithout — Not sealedPN — Normal (ISO 492:2023)Not recordedJP — Steel sheet metalNot recordedWithout — Bearing not greased
FAG 7317-B-XL-JP-UOWithout — Not sealedPN — Normal (ISO 492:2023)Not recordedJP — Steel sheet metalNot recordedWithout — Bearing not greased
FAG 7317-B-XL-MPWithout — Not sealedPN — Normal (ISO 492:2023)Not recordedMP — Solid brass cage, ball guidedNot recordedWithout — Bearing not greased
FAG 7317-B-XL-MP-P5-UOWithout — Not sealedP5 — Class 5 (ISO 492:2023)Not recordedMP — Solid brass cage, ball guidedNot recordedWithout — Bearing not greased
FAG 7317-B-XL-MP-UAWithout — Not sealedPN — Normal (ISO 492:2023)Not recordedMP — Solid brass cage, ball guidedNot recordedWithout — Bearing not greased
FAG 7317-B-XL-MP-UBWithout — Not sealedPN — Normal (ISO 492:2023)Not recordedMP — Solid brass cage, ball guidedNot recordedWithout — Bearing not greased
FAG 7317-B-XL-MP-UOWithout — Not sealedPN — Normal (ISO 492:2023)Not recordedMP — Solid brass cage, ball guidedNot recordedWithout — Bearing not greased
FAG 7317-B-XL-TVPWithout — Not sealedPN — Normal (ISO 492:2023)Not recordedTVP — Solid cage made of glass-fiber reinforced polyamid PA66Not recordedWithout — Bearing not greased
FAG 7317-B-XL-TVP-UAWithout — Not sealedPN — Normal (ISO 492:2023)Not recordedTVP — Solid cage made of glass-fiber reinforced polyamid PA66Not recordedWithout — Bearing not greased
FAG 7317-B-XL-TVP-UBWithout — Not sealedPN — Normal (ISO 492:2023)Not recordedTVP — Solid cage made of glass-fiber reinforced polyamid PA66Not recordedWithout — Bearing not greased
FAG 7317-B-XL-TVP-UOWithout — Not sealedPN — Normal (ISO 492:2023)Not recordedTVP — Solid cage made of glass-fiber reinforced polyamid PA66Not recordedWithout — Bearing not greased
TIMKEN 7317WNOpenNot recordedNot recordedBrass cageNot recordedNot recorded
TIMKEN 7317WNMBRSUOpenNot recordedNot recordedBrass cageNot recordedNot recorded
TIMKEN 7317WNSUOpenNot recordedNot recordedBrass cageNot recordedNot recorded
NSK 7317AWNot recordedNot recordedNot recordedPressed steelNot recordedNot recorded
NSK 7317AWDBNot recordedNot recordedNot recordedPressed steelNot recordedNot recorded
NSK 7317AWDFNot recordedNot recordedNot recordedPressed steelNot recordedNot recorded
NSK 7317AWDTNot recordedNot recordedNot recordedPressed steelNot recordedNot recorded
NSK 7317BEAT85Not recordedNot recordedNot recordedPolyamide 46 resinNot recordedNot recorded
NSK 7317BWNot recordedNot recordedNot recordedPressed steelNot recordedNot recorded
NSK 7317BWDBNot recordedNot recordedNot recordedPressed steelNot recordedNot recorded
NSK 7317BWDFNot recordedNot recordedNot recordedPressed steelNot recordedNot recorded
NSK 7317BWDTNot recordedNot recordedNot recordedPressed steelNot recordedNot recorded
KOYO 7317BNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 7317BDBNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 7317BDB FYNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 7317BDFNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 7317BDF FYNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 7317BDTNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 7317BDT FYNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 7317B FYNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 7317CNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 7317CDBNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 7317CDB FYNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 7317CDFNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 7317CDF FYNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 7317CDTNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 7317CDT FYNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 7317C FYNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 7317DBNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 7317DB FYNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 7317DFNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 7317DF FYNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 7317DTNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 7317DT FYNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 7317 FYNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded

How to compare these values

  • Use the displayed dimension names and original symbols. Housing length L, height H2 and flange width are not bearing outside diameter D. A catalogue width with an unverified symbol must not be assumed to be inner-ring width B or assembly width T. Open the product record for mounting dimensions and geometry.
  • Inch values are calculated from the recorded millimetres using 25.4 mm per inch, rounded to six decimal places. They do not change a metric bearing into an inch-series bearing. Gram values are converted from the recorded mass in kilograms.
  • C and C0 describe different rating conditions. They are not a single safe working-load limit and cannot replace an application load calculation.
  • Reference and limiting speeds are separate catalogue values. The source grease/oil context is shown where recorded. Lubricant, seals, loads, fit, clearance and cooling affect the usable operating speed.
  • A common base number does not prove equivalent seals, clearance, precision, material or interchangeability. Open the full designation for these fields.

Related prefix matches — other model numbers may appear

These discovery results can contain a longer number or a different component. They are not specifications for the requested exact model. Open the complete product to inspect its original geometry.

Check the drawing before substituting

Nominal dimensions are not shaft-fit tolerances. Different variants can add grooves, flanges, wider rings or assembly components. When the table has different dimensions, the complete designation—not the shared prefix—controls.

Reference basis & data limits

Manufacturer terminology is retained in the product records. Technical reference basis: JTEKT Basic Bearing Knowledge (boundary dimensions, tolerance classes and lubrication); NSK Bearing ABCs (lubrication, designations and clearance); NTN technical FAQs (closure codes and component interchange); SKF rolling-bearing selection and maintenance references.

Selection workflows and catalogue grouping are BearingScope editorial aids. Verify the current drawing and application requirements before using a candidate. Missing database information is not converted into an assumed match.

Search the consolidated catalogue

Find, filter and compare bearing model data in one place.

Open model search