99,016 bearing records · search, filter and compare

Find · understand · compare

7315 bearing dimensions & suffix variants

Look up recorded dimensions for designations beginning with 7315. The table retains complete manufacturer designations so special suffixes and different dimensional variants remain visible.

On this page5 sections

Find by measured dimensions

Enter bore d, outside diameter D and width B. Use decimals or inch fractions such as 1/2 or 1 1/4.

For tapered assemblies use total width T; for units or flanged bearings also check the mounting drawing.

Exact model evidence

7315 dimensions and recorded technical data

The recorded 7315 base designation measures 75×160×37 mm (inside diameter d × outside diameter D × width B). This answer uses unsuffixed records from KOYO. It does not assign the same dimensions or operating ratings to every suffix.

The numeric series boundary is preserved: a longer number is not included merely because its first digits match. 60 recorded variants are listed. A dash means the value is missing, not zero.

Brand / full designationNamed dimensions (mm / in)Dynamic C (kN)Static C0 (kN)Reference speed (rpm)Limiting speed (rpm)Mass (kg / g)
KOYO7315Angular contact ball bearing
Bore diameter (d)
75 mm
2.952756 in
Outside diameter (D)
160 mm
6.299213 in
Width (B)
37 mm
1.456693 in
170 kN106 kN—4000 rpmLimiting Speeds(Grease Lub.): 4000 min-1Limiting Speeds(Oil Lub.): 5000 min-13.15 kg3150 g
SKF7315 BEC86PSingle row angular contact ball bearing
Recorded bore (d)
75 mm
2.952756 in
Recorded outside dimension (D)
160 mm
6.299213 in
Catalogue width (symbol unverified)
37 mm
1.456693 in
132 kN104 kN5300 rpm5300 rpm3.06 kg3060 g
SKF7315 BECBJSingle row angular contact ball bearing
Bore diameter (d)
75 mm
2.952756 in
Outside diameter (D)
160 mm
6.299213 in
Width (B)
37 mm
1.456693 in
132 kN104 kN5300 rpm5300 rpm3.2 kg3200 g
SKF7315 BECBMSingle row angular contact ball bearing
Bore diameter (d)
75 mm
2.952756 in
Outside diameter (D)
160 mm
6.299213 in
Width (B)
37 mm
1.456693 in
132 kN104 kN5300 rpm7000 rpm3.39 kg3390 g
SKF7315 BECBPSingle row angular contact ball bearing
Bore diameter (d)
75 mm
2.952756 in
Outside diameter (D)
160 mm
6.299213 in
Width (B)
37 mm
1.456693 in
132 kN104 kN5300 rpm5300 rpm3.06 kg3060 g
SKF7315 BECBYSingle row angular contact ball bearing
Bore diameter (d)
75 mm
2.952756 in
Outside diameter (D)
160 mm
6.299213 in
Width (B)
37 mm
1.456693 in
132 kN104 kN5300 rpm5300 rpm3.2 kg3200 g
SKF7315 BEGAMSingle row angular contact ball bearing
Bore diameter (d)
75 mm
2.952756 in
Outside diameter (D)
160 mm
6.299213 in
Width (B)
37 mm
1.456693 in
132 kN104 kN5300 rpm7000 rpm3.39 kg3390 g
SKF7315 BEGAPSingle row angular contact ball bearing
Bore diameter (d)
75 mm
2.952756 in
Outside diameter (D)
160 mm
6.299213 in
Width (B)
37 mm
1.456693 in
132 kN104 kN5300 rpm5300 rpm3.06 kg3060 g
SKF7315 BEGAPHSingle row angular contact ball bearing
Bore diameter (d)
75 mm
2.952756 in
Outside diameter (D)
160 mm
6.299213 in
Width (B)
37 mm
1.456693 in
132 kN104 kN5300 rpm5300 rpm3.06 kg3060 g
SKF7315 BEGAP/W64Single row angular contact ball bearing
Recorded bore (d)
75 mm
2.952756 in
Recorded outside dimension (D)
160 mm
6.299213 in
Catalogue width (symbol unverified)
37 mm
1.456693 in
125 kN98 kN5300 rpm5000 rpm3.06 kg3060 g
SKF7315 BEM1/S0VQ335Single row angular contact ball bearing
Recorded bore (d)
75 mm
2.952756 in
Recorded outside dimension (D)
160 mm
6.299213 in
Catalogue width (symbol unverified)
37 mm
1.456693 in
125 kN98 kN5300 rpm5000 rpm3.41 kg3410 g
SKF7315 BEPSingle row angular contact ball bearing
Bore diameter (d)
75 mm
2.952756 in
Outside diameter (D)
160 mm
6.299213 in
Width (B)
37 mm
1.456693 in
125 kN98 kN5300 rpm5000 rpm3.06 kg3060 g
FAG7315-B-XL-JPAngular contact ball bearing
Bore diameter (d)
75 mm
2.952756 in
Outside diameter (D)
160 mm
6.299213 in
Width (B)
37 mm
1.456693 in
140 kN107 kN4500 rpm5600 rpm3.3 kg3300 g
FAG7315-B-XL-JP-UAAngular contact ball bearing
Bore diameter (d)
75 mm
2.952756 in
Outside diameter (D)
160 mm
6.299213 in
Width (B)
37 mm
1.456693 in
140 kN107 kN4500 rpm5600 rpm3.3 kg3300 g
FAG7315-B-XL-JP-UOAngular contact ball bearing
Bore diameter (d)
75 mm
2.952756 in
Outside diameter (D)
160 mm
6.299213 in
Width (B)
37 mm
1.456693 in
140 kN107 kN4500 rpm5600 rpm3.3 kg3300 g
FAG7315-B-XL-MPAngular contact ball bearing
Bore diameter (d)
75 mm
2.952756 in
Outside diameter (D)
160 mm
6.299213 in
Width (B)
37 mm
1.456693 in
140 kN107 kN4500 rpm7300 rpm3.445 kg3445 g
FAG7315-B-XL-MP-P5-UOAngular contact ball bearing
Bore diameter (d)
75 mm
2.952756 in
Outside diameter (D)
160 mm
6.299213 in
Width (B)
37 mm
1.456693 in
140 kN107 kN4500 rpm7300 rpm3.441 kg3441 g
FAG7315-B-XL-MP-UAAngular contact ball bearing
Bore diameter (d)
75 mm
2.952756 in
Outside diameter (D)
160 mm
6.299213 in
Width (B)
37 mm
1.456693 in
140 kN107 kN4500 rpm7300 rpm3.445 kg3445 g
FAG7315-B-XL-MP-UBAngular contact ball bearing
Bore diameter (d)
75 mm
2.952756 in
Outside diameter (D)
160 mm
6.299213 in
Width (B)
37 mm
1.456693 in
140 kN107 kN4500 rpm7300 rpm3.445 kg3445 g
FAG7315-B-XL-MP-UOAngular contact ball bearing
Bore diameter (d)
75 mm
2.952756 in
Outside diameter (D)
160 mm
6.299213 in
Width (B)
37 mm
1.456693 in
140 kN107 kN4500 rpm7300 rpm3.441 kg3441 g
FAG7315-B-XL-TVPAngular contact ball bearing
Bore diameter (d)
75 mm
2.952756 in
Outside diameter (D)
160 mm
6.299213 in
Width (B)
37 mm
1.456693 in
140 kN107 kN4500 rpm5600 rpm3.071 kg3071 g
FAG7315-B-XL-TVP-UAAngular contact ball bearing
Bore diameter (d)
75 mm
2.952756 in
Outside diameter (D)
160 mm
6.299213 in
Width (B)
37 mm
1.456693 in
140 kN107 kN4500 rpm5600 rpm3.071 kg3071 g
FAG7315-B-XL-TVP-UBAngular contact ball bearing
Bore diameter (d)
75 mm
2.952756 in
Outside diameter (D)
160 mm
6.299213 in
Width (B)
37 mm
1.456693 in
140 kN107 kN4500 rpm5600 rpm3.071 kg3071 g
FAG7315-B-XL-TVP-ULAngular contact ball bearing
Bore diameter (d)
75 mm
2.952756 in
Outside diameter (D)
160 mm
6.299213 in
Width (B)
37 mm
1.456693 in
140 kN107 kN4500 rpm5600 rpm3.071 kg3071 g
FAG7315-B-XL-TVP-UOAngular contact ball bearing
Bore diameter (d)
75 mm
2.952756 in
Outside diameter (D)
160 mm
6.299213 in
Width (B)
37 mm
1.456693 in
140 kN107 kN4500 rpm5600 rpm3.165 kg3165 g
TIMKEN7315WNAngular contact ball bearing
Recorded bore (d)
75 mm
2.952756 in
Recorded outside dimension (D)
160 mm
6.299213 in
Catalogue width (symbol unverified)
37 mm
1.456693 in
125 kN97.4 kN——3.19 kg3190 g
TIMKEN7315WNMBRSUAngular contact ball bearing
Recorded bore (d)
75 mm
2.952756 in
Recorded outside dimension (D)
160 mm
6.299213 in
Catalogue width (symbol unverified)
37 mm
1.456693 in
125 kN97.4 kN——3.19 kg3190 g
TIMKEN7315WNSUAngular contact ball bearing
Recorded bore (d)
75 mm
2.952756 in
Recorded outside dimension (D)
160 mm
6.299213 in
Catalogue width (symbol unverified)
37 mm
1.456693 in
125 kN97.4 kN——3.19 kg3190 g
NSK7315AWAngular contact ball bearing
Bore diameter (d)
75 mm
2.952756 in
Outside diameter (D)
160 mm
6.299213 in
Individual bearing width (B)
37 mm
1.456693 in
149 kN106 kN——3.13 kg3130 g
NSK7315AWDBAngular contact ball bearing
Bore diameter (d)
75 mm
2.952756 in
Outside diameter (D)
160 mm
6.299213 in
Catalogue width (symbol unverified)
74 mm
2.913386 in
243 kN212 kN———
NSK7315AWDFAngular contact ball bearing
Bore diameter (d)
75 mm
2.952756 in
Outside diameter (D)
160 mm
6.299213 in
Catalogue width (symbol unverified)
74 mm
2.913386 in
243 kN212 kN———
NSK7315AWDTAngular contact ball bearing
Bore diameter (d)
75 mm
2.952756 in
Outside diameter (D)
160 mm
6.299213 in
Catalogue width (symbol unverified)
74 mm
2.913386 in
243 kN212 kN———
NSK7315BEAT85Angular contact ball bearing
Bore diameter (d)
75 mm
2.952756 in
Outside diameter (D)
160 mm
6.299213 in
Individual bearing width (B)
37 mm
1.456693 in
140 kN98.5 kN——3.03 kg3030 g
NSK7315BEAWAngular contact ball bearing
Bore diameter (d)
75 mm
2.952756 in
Outside diameter (D)
160 mm
6.299213 in
Individual bearing width (B)
37 mm
1.456693 in
140 kN98.5 kN——3.13 kg3130 g
NSK7315BEAWDBAngular contact ball bearing
Bore diameter (d)
75 mm
2.952756 in
Outside diameter (D)
160 mm
6.299213 in
Catalogue width (symbol unverified)
74 mm
2.913386 in
228 kN197 kN———
NSK7315BEAWDFAngular contact ball bearing
Bore diameter (d)
75 mm
2.952756 in
Outside diameter (D)
160 mm
6.299213 in
Catalogue width (symbol unverified)
74 mm
2.913386 in
228 kN197 kN———
NSK7315BEAWDTAngular contact ball bearing
Bore diameter (d)
75 mm
2.952756 in
Outside diameter (D)
160 mm
6.299213 in
Catalogue width (symbol unverified)
74 mm
2.913386 in
228 kN197 kN———
KOYO7315BAngular contact ball bearing
Bore diameter (d)
75 mm
2.952756 in
Outside diameter (D)
160 mm
6.299213 in
Width (B)
37 mm
1.456693 in
156 kN97.3 kN—3000 rpmLimiting Speeds(Grease Lub.): 3000 min-1Limiting Speeds(Oil Lub.): 4000 min-13.15 kg3150 g
KOYO7315BDBAngular contact ball bearing
Bore diameter (d)
75 mm
2.952756 in
Outside diameter (D)
160 mm
6.299213 in
Width (B)
74 mm
2.913386 in
253 kN195 kN—2400 rpmLimiting Speeds(Grease Lub.): 2400 min-1Limiting Speeds(Oil Lub.): 3200 min-16.3 kg6300 g
KOYO7315BDB FYAngular contact ball bearing
Bore diameter (d)
75 mm
2.952756 in
Outside diameter (D)
160 mm
6.299213 in
Width (B)
74 mm
2.913386 in
239 kN178 kN—3000 rpmLimiting Speeds(Grease Lub.): 3000 min-1Limiting Speeds(Oil Lub.): 4000 min-16.3 kg6300 g
KOYO7315BDFAngular contact ball bearing
Bore diameter (d)
75 mm
2.952756 in
Outside diameter (D)
160 mm
6.299213 in
Width (B)
74 mm
2.913386 in
253 kN195 kN—2400 rpmLimiting Speeds(Grease Lub.): 2400 min-1Limiting Speeds(Oil Lub.): 3200 min-16.3 kg6300 g
KOYO7315BDF FYAngular contact ball bearing
Bore diameter (d)
75 mm
2.952756 in
Outside diameter (D)
160 mm
6.299213 in
Width (B)
74 mm
2.913386 in
239 kN178 kN—3000 rpmLimiting Speeds(Grease Lub.): 3000 min-1Limiting Speeds(Oil Lub.): 4000 min-16.3 kg6300 g
KOYO7315BDTAngular contact ball bearing
Bore diameter (d)
75 mm
2.952756 in
Outside diameter (D)
160 mm
6.299213 in
Width (B)
74 mm
2.913386 in
253 kN195 kN—2400 rpmLimiting Speeds(Grease Lub.): 2400 min-1Limiting Speeds(Oil Lub.): 3200 min-16.3 kg6300 g
KOYO7315BDT FYAngular contact ball bearing
Bore diameter (d)
75 mm
2.952756 in
Outside diameter (D)
160 mm
6.299213 in
Width (B)
74 mm
2.913386 in
239 kN178 kN—3000 rpmLimiting Speeds(Grease Lub.): 3000 min-1Limiting Speeds(Oil Lub.): 4000 min-16.3 kg6300 g
KOYO7315B FYAngular contact ball bearing
Bore diameter (d)
75 mm
2.952756 in
Outside diameter (D)
160 mm
6.299213 in
Width (B)
37 mm
1.456693 in
147 kN89.2 kN—3800 rpmLimiting Speeds(Grease Lub.): 3800 min-1Limiting Speeds(Oil Lub.): 5000 min-13.15 kg3150 g
KOYO7315CAngular contact ball bearing
Bore diameter (d)
75 mm
2.952756 in
Outside diameter (D)
160 mm
6.299213 in
Width (B)
37 mm
1.456693 in
182 kN113 kN—5600 rpmLimiting Speeds(Grease Lub.): 5600 min-1Limiting Speeds(Oil Lub.): 7300 min-13.15 kg3150 g
KOYO7315CDBAngular contact ball bearing
Bore diameter (d)
75 mm
2.952756 in
Outside diameter (D)
160 mm
6.299213 in
Width (B)
74 mm
2.913386 in
296 kN227 kN—4400 rpmLimiting Speeds(Grease Lub.): 4400 min-1Limiting Speeds(Oil Lub.): 5900 min-16.3 kg6300 g
KOYO7315CDB FYAngular contact ball bearing
Bore diameter (d)
75 mm
2.952756 in
Outside diameter (D)
160 mm
6.299213 in
Width (B)
74 mm
2.913386 in
279 kN208 kN—5500 rpmLimiting Speeds(Grease Lub.): 5500 min-1Limiting Speeds(Oil Lub.): 7400 min-16.3 kg6300 g
KOYO7315CDFAngular contact ball bearing
Bore diameter (d)
75 mm
2.952756 in
Outside diameter (D)
160 mm
6.299213 in
Width (B)
74 mm
2.913386 in
296 kN227 kN—4400 rpmLimiting Speeds(Grease Lub.): 4400 min-1Limiting Speeds(Oil Lub.): 5900 min-16.3 kg6300 g
KOYO7315CDF FYAngular contact ball bearing
Bore diameter (d)
75 mm
2.952756 in
Outside diameter (D)
160 mm
6.299213 in
Width (B)
74 mm
2.913386 in
279 kN208 kN—5500 rpmLimiting Speeds(Grease Lub.): 5500 min-1Limiting Speeds(Oil Lub.): 7400 min-16.3 kg6300 g
KOYO7315CDTAngular contact ball bearing
Bore diameter (d)
75 mm
2.952756 in
Outside diameter (D)
160 mm
6.299213 in
Width (B)
74 mm
2.913386 in
296 kN227 kN—4400 rpmLimiting Speeds(Grease Lub.): 4400 min-1Limiting Speeds(Oil Lub.): 5900 min-16.3 kg6300 g
KOYO7315CDT FYAngular contact ball bearing
Bore diameter (d)
75 mm
2.952756 in
Outside diameter (D)
160 mm
6.299213 in
Width (B)
74 mm
2.913386 in
279 kN208 kN—5500 rpmLimiting Speeds(Grease Lub.): 5500 min-1Limiting Speeds(Oil Lub.): 7400 min-16.3 kg6300 g
KOYO7315C FYAngular contact ball bearing
Bore diameter (d)
75 mm
2.952756 in
Outside diameter (D)
160 mm
6.299213 in
Width (B)
37 mm
1.456693 in
172 kN104 kN—7000 rpmLimiting Speeds(Grease Lub.): 7000 min-1Limiting Speeds(Oil Lub.): 9200 min-13.15 kg3150 g
KOYO7315DBAngular contact ball bearing
Bore diameter (d)
75 mm
2.952756 in
Outside diameter (D)
160 mm
6.299213 in
Width (B)
74 mm
2.913386 in
276 kN212 kN—3200 rpmLimiting Speeds(Grease Lub.): 3200 min-1Limiting Speeds(Oil Lub.): 4000 min-16.3 kg6300 g
KOYO7315DB FYAngular contact ball bearing
Bore diameter (d)
75 mm
2.952756 in
Outside diameter (D)
160 mm
6.299213 in
Width (B)
74 mm
2.913386 in
260 kN194 kN—4000 rpmLimiting Speeds(Grease Lub.): 4000 min-1Limiting Speeds(Oil Lub.): 5000 min-16.3 kg6300 g
KOYO7315DFAngular contact ball bearing
Bore diameter (d)
75 mm
2.952756 in
Outside diameter (D)
160 mm
6.299213 in
Width (B)
74 mm
2.913386 in
276 kN212 kN—3200 rpmLimiting Speeds(Grease Lub.): 3200 min-1Limiting Speeds(Oil Lub.): 4000 min-16.3 kg6300 g
KOYO7315DF FYAngular contact ball bearing
Bore diameter (d)
75 mm
2.952756 in
Outside diameter (D)
160 mm
6.299213 in
Width (B)
74 mm
2.913386 in
260 kN194 kN—4000 rpmLimiting Speeds(Grease Lub.): 4000 min-1Limiting Speeds(Oil Lub.): 5000 min-16.3 kg6300 g
KOYO7315DTAngular contact ball bearing
Bore diameter (d)
75 mm
2.952756 in
Outside diameter (D)
160 mm
6.299213 in
Width (B)
74 mm
2.913386 in
276 kN212 kN—3200 rpmLimiting Speeds(Grease Lub.): 3200 min-1Limiting Speeds(Oil Lub.): 4000 min-16.3 kg6300 g
KOYO7315DT FYAngular contact ball bearing
Bore diameter (d)
75 mm
2.952756 in
Outside diameter (D)
160 mm
6.299213 in
Width (B)
74 mm
2.913386 in
260 kN194 kN—4000 rpmLimiting Speeds(Grease Lub.): 4000 min-1Limiting Speeds(Oil Lub.): 5000 min-16.3 kg6300 g
KOYO7315 FYAngular contact ball bearing
Bore diameter (d)
75 mm
2.952756 in
Outside diameter (D)
160 mm
6.299213 in
Width (B)
37 mm
1.456693 in
160 kN97 kN—5000 rpmLimiting Speeds(Grease Lub.): 5000 min-1Limiting Speeds(Oil Lub.): 6300 min-13.15 kg3150 g
Compare recorded seals, clearance, precision and materials

Manufacturer wording is retained. A missing property is not inferred from another brand or a similar suffix.

Brand / designationClosureOriginal precisionClearanceCageMaterialLubricant
KOYO 7315Not recordedNot recordedNot recordedNot recordedNot recordedNot recorded
SKF 7315 BEC86PWithoutNot recordedNot recordedNon-metallicBearing steelNone
SKF 7315 BECBJWithoutP6Not recordedSteel sheet metalBearing steelNone
SKF 7315 BECBMWithoutP6Not recordedMachined brassBearing steelNone
SKF 7315 BECBPWithoutP6Not recordedNon-metallicBearing steelNone
SKF 7315 BECBYWithoutP6Not recordedBrass sheet metalBearing steelNone
SKF 7315 BEGAMWithoutP6Not recordedMachined brassBearing steelNone
SKF 7315 BEGAPWithoutP6Not recordedNon-metallicBearing steelNone
SKF 7315 BEGAPHWithoutP6Not recordedNon-metallicBearing steelNone
SKF 7315 BEGAP/W64WithoutNot recordedNot recordedNon-metallicBearing steelSolid Oil
SKF 7315 BEM1/S0VQ335WithoutNot recordedNot recordedMachined brassBearing steelNone
SKF 7315 BEPWithoutNormalNot recordedNon-metallicBearing steelNone
FAG 7315-B-XL-JPWithout — Not sealedPN — Normal (ISO 492:2023)Not recordedJP — Steel sheet metalNot recordedWithout — Bearing not greased
FAG 7315-B-XL-JP-UAWithout — Not sealedPN — Normal (ISO 492:2023)Not recordedJP — Steel sheet metalNot recordedWithout — Bearing not greased
FAG 7315-B-XL-JP-UOWithout — Not sealedPN — Normal (ISO 492:2023)Not recordedJP — Steel sheet metalNot recordedWithout — Bearing not greased
FAG 7315-B-XL-MPWithout — Not sealedPN — Normal (ISO 492:2023)Not recordedMP — Solid brass cage, ball guidedNot recordedWithout — Bearing not greased
FAG 7315-B-XL-MP-P5-UOWithout — Not sealedP5 — Class 5 (ISO 492:2023)Not recordedMP — Solid brass cage, ball guidedNot recordedWithout — Bearing not greased
FAG 7315-B-XL-MP-UAWithout — Not sealedPN — Normal (ISO 492:2023)Not recordedMP — Solid brass cage, ball guidedNot recordedWithout — Bearing not greased
FAG 7315-B-XL-MP-UBWithout — Not sealedPN — Normal (ISO 492:2023)Not recordedMP — Solid brass cage, ball guidedNot recordedWithout — Bearing not greased
FAG 7315-B-XL-MP-UOWithout — Not sealedPN — Normal (ISO 492:2023)Not recordedMP — Solid brass cage, ball guidedNot recordedWithout — Bearing not greased
FAG 7315-B-XL-TVPWithout — Not sealedPN — Normal (ISO 492:2023)Not recordedTVP — Solid cage made of glass-fiber reinforced polyamid PA66Not recordedWithout — Bearing not greased
FAG 7315-B-XL-TVP-UAWithout — Not sealedPN — Normal (ISO 492:2023)Not recordedTVP — Solid cage made of glass-fiber reinforced polyamid PA66Not recordedWithout — Bearing not greased
FAG 7315-B-XL-TVP-UBWithout — Not sealedPN — Normal (ISO 492:2023)Not recordedTVP — Solid cage made of glass-fiber reinforced polyamid PA66Not recordedWithout — Bearing not greased
FAG 7315-B-XL-TVP-ULWithout — Not sealedPN — Normal (ISO 492:2023)Not recordedTVP — Solid cage made of glass-fiber reinforced polyamid PA66Not recordedWithout — Bearing not greased
FAG 7315-B-XL-TVP-UOWithout — Not sealedPN — Normal (ISO 492:2023)Not recordedTVP — Solid cage made of glass-fiber reinforced polyamid PA66Not recordedWithout — Bearing not greased
TIMKEN 7315WNOpenNot recordedNot recordedBrass cageNot recordedNot recorded
TIMKEN 7315WNMBRSUOpenNot recordedNot recordedBrass cageNot recordedNot recorded
TIMKEN 7315WNSUOpenNot recordedNot recordedBrass cageNot recordedNot recorded
NSK 7315AWNot recordedNot recordedNot recordedPressed steelNot recordedNot recorded
NSK 7315AWDBNot recordedNot recordedNot recordedPressed steelNot recordedNot recorded
NSK 7315AWDFNot recordedNot recordedNot recordedPressed steelNot recordedNot recorded
NSK 7315AWDTNot recordedNot recordedNot recordedPressed steelNot recordedNot recorded
NSK 7315BEAT85Not recordedNot recordedNot recordedPolyamide 46 resinNot recordedNot recorded
NSK 7315BEAWNot recordedNot recordedNot recordedPressed steelNot recordedNot recorded
NSK 7315BEAWDBNot recordedNot recordedNot recordedPressed steelNot recordedNot recorded
NSK 7315BEAWDFNot recordedNot recordedNot recordedPressed steelNot recordedNot recorded
NSK 7315BEAWDTNot recordedNot recordedNot recordedPressed steelNot recordedNot recorded
KOYO 7315BNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 7315BDBNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 7315BDB FYNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 7315BDFNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 7315BDF FYNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 7315BDTNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 7315BDT FYNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 7315B FYNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 7315CNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 7315CDBNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 7315CDB FYNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 7315CDFNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 7315CDF FYNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 7315CDTNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 7315CDT FYNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 7315C FYNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 7315DBNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 7315DB FYNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 7315DFNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 7315DF FYNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 7315DTNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 7315DT FYNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 7315 FYNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded

How to compare these values

  • Use the displayed dimension names and original symbols. Housing length L, height H2 and flange width are not bearing outside diameter D. A catalogue width with an unverified symbol must not be assumed to be inner-ring width B or assembly width T. Open the product record for mounting dimensions and geometry.
  • Inch values are calculated from the recorded millimetres using 25.4 mm per inch, rounded to six decimal places. They do not change a metric bearing into an inch-series bearing. Gram values are converted from the recorded mass in kilograms.
  • C and C0 describe different rating conditions. They are not a single safe working-load limit and cannot replace an application load calculation.
  • Reference and limiting speeds are separate catalogue values. The source grease/oil context is shown where recorded. Lubricant, seals, loads, fit, clearance and cooling affect the usable operating speed.
  • A common base number does not prove equivalent seals, clearance, precision, material or interchangeability. Open the full designation for these fields.

Related prefix matches — other model numbers may appear

These discovery results can contain a longer number or a different component. They are not specifications for the requested exact model. Open the complete product to inspect its original geometry.

Check the drawing before substituting

Nominal dimensions are not shaft-fit tolerances. Different variants can add grooves, flanges, wider rings or assembly components. When the table has different dimensions, the complete designation—not the shared prefix—controls.

Reference basis & data limits

Manufacturer terminology is retained in the product records. Technical reference basis: JTEKT Basic Bearing Knowledge (boundary dimensions, tolerance classes and lubrication); NSK Bearing ABCs (lubrication, designations and clearance); NTN technical FAQs (closure codes and component interchange); SKF rolling-bearing selection and maintenance references.

Selection workflows and catalogue grouping are BearingScope editorial aids. Verify the current drawing and application requirements before using a candidate. Missing database information is not converted into an assumed match.

Search the consolidated catalogue

Find, filter and compare bearing model data in one place.

Open model search