99,016 bearing records · search, filter and compare

info@bearingscope.com
Find · understand · compare

7309 bearing dimensions & suffix variants

Look up recorded dimensions for designations beginning with 7309. The table retains complete manufacturer designations so special suffixes and different dimensional variants remain visible.

On this page5 sections

Find by measured dimensions

Enter bore d, outside diameter D and width B. Use decimals or inch fractions such as 1/2 or 1 1/4.

For tapered assemblies use total width T; for units or flanged bearings also check the mounting drawing.

Exact model evidence

7309 dimensions and recorded technical data

The recorded 7309 base designation measures 45×100×25 mm (inside diameter d × outside diameter D × width B). This answer uses unsuffixed records from KOYO. It does not assign the same dimensions or operating ratings to every suffix.

The numeric series boundary is preserved: a longer number is not included merely because its first digits match. 64 recorded variants are listed. A dash means the value is missing, not zero.

Brand / full designationNamed dimensions (mm / in)Dynamic C (kN)Static C0 (kN)Reference speed (rpm)Limiting speed (rpm)Mass (kg / g)
KOYO7309Angular contact ball bearing
Bore diameter (d)
45 mm
1.771654 in
Outside diameter (D)
100 mm
3.937008 in
Width (B)
25 mm
0.984252 in
73.1 kN40.4 kN—6500 rpmLimiting Speeds(Grease Lub.): 6500 min-1Limiting Speeds(Oil Lub.): 8000 min-10.875 kg875 g
SKF7309 ACCBMSingle row angular contact ball bearing
Bore diameter (d)
45 mm
1.771654 in
Outside diameter (D)
100 mm
3.937008 in
Width (B)
25 mm
0.984252 in
68 kN45.5 kN9000 rpm14000 rpm0.898 kg898 g
SKF7309 BE-2RZPSingle row angular contact ball bearing with 40° contact angle and non-contact seals on both sides
Bore diameter (d)
45 mm
1.771654 in
Outside diameter (D)
100 mm
3.937008 in
Width (B)
25 mm
0.984252 in
55.9 kN37.5 kN9000 rpm6700 rpm0.826 kg826 g
SKF7309 BECAPSingle row angular contact ball bearing
Bore diameter (d)
45 mm
1.771654 in
Outside diameter (D)
100 mm
3.937008 in
Width (B)
25 mm
0.984252 in
61 kN40.5 kN9000 rpm9000 rpm0.812 kg812 g
SKF7309 BECBJSingle row angular contact ball bearing
Bore diameter (d)
45 mm
1.771654 in
Outside diameter (D)
100 mm
3.937008 in
Width (B)
25 mm
0.984252 in
61 kN40.5 kN9000 rpm9000 rpm0.875 kg875 g
SKF7309 BECBMSingle row angular contact ball bearing
Bore diameter (d)
45 mm
1.771654 in
Outside diameter (D)
100 mm
3.937008 in
Width (B)
25 mm
0.984252 in
61 kN40.5 kN9000 rpm11000 rpm0.898 kg898 g
SKF7309 BECBM/W64Single row angular contact ball bearing
Recorded bore (d)
45 mm
1.771654 in
Recorded outside dimension (D)
100 mm
3.937008 in
Catalogue width (symbol unverified)
25 mm
0.984252 in
55.9 kN37.5 kN9000 rpm10000 rpm0.998 kg998 g
SKF7309 BECBPSingle row angular contact ball bearing
Bore diameter (d)
45 mm
1.771654 in
Outside diameter (D)
100 mm
3.937008 in
Width (B)
25 mm
0.984252 in
61 kN40.5 kN9000 rpm9000 rpm0.812 kg812 g
SKF7309 BECBP/W64Single row angular contact ball bearing
Recorded bore (d)
45 mm
1.771654 in
Recorded outside dimension (D)
100 mm
3.937008 in
Catalogue width (symbol unverified)
25 mm
0.984252 in
55.9 kN37.5 kN9000 rpm8000 rpm0.812 kg812 g
SKF7309 BECBYSingle row angular contact ball bearing
Bore diameter (d)
45 mm
1.771654 in
Outside diameter (D)
100 mm
3.937008 in
Width (B)
25 mm
0.984252 in
61 kN40.5 kN9000 rpm9000 rpm0.86 kg860 g
SKF7309 BEGAMSingle row angular contact ball bearing
Bore diameter (d)
45 mm
1.771654 in
Outside diameter (D)
100 mm
3.937008 in
Width (B)
25 mm
0.984252 in
61 kN40.5 kN9000 rpm11000 rpm0.898 kg898 g
SKF7309 BEGAPSingle row angular contact ball bearing
Bore diameter (d)
45 mm
1.771654 in
Outside diameter (D)
100 mm
3.937008 in
Width (B)
25 mm
0.984252 in
61 kN40.5 kN9000 rpm9000 rpm0.812 kg812 g
SKF7309 BEGAPHSingle row angular contact ball bearing
Bore diameter (d)
45 mm
1.771654 in
Outside diameter (D)
100 mm
3.937008 in
Width (B)
25 mm
0.984252 in
61 kN40.5 kN9000 rpm9000 rpm0.812 kg812 g
SKF7309 BEGBPSingle row angular contact ball bearing
Bore diameter (d)
45 mm
1.771654 in
Outside diameter (D)
100 mm
3.937008 in
Width (B)
25 mm
0.984252 in
61 kN40.5 kN9000 rpm9000 rpm0.812 kg812 g
SKF7309 BEGBYSingle row angular contact ball bearing
Bore diameter (d)
45 mm
1.771654 in
Outside diameter (D)
100 mm
3.937008 in
Width (B)
25 mm
0.984252 in
61 kN40.5 kN9000 rpm9000 rpm0.86 kg860 g
SKF7309 BEPSingle row angular contact ball bearing
Bore diameter (d)
45 mm
1.771654 in
Outside diameter (D)
100 mm
3.937008 in
Width (B)
25 mm
0.984252 in
55.9 kN37.5 kN9000 rpm8000 rpm0.812 kg812 g
FAG7309-B-XL-JPAngular contact ball bearing
Bore diameter (d)
45 mm
1.771654 in
Outside diameter (D)
100 mm
3.937008 in
Width (B)
25 mm
0.984252 in
69 kN43 kN6500 rpm9300 rpm0.859 kg859 g
FAG7309-B-XL-JP-S1-UOAngular contact ball bearing
Bore diameter (d)
45 mm
1.771654 in
Outside diameter (D)
100 mm
3.937008 in
Width (B)
25 mm
0.984252 in
69 kN43 kN6500 rpm9300 rpm0.848 kg848 g
FAG7309-B-XL-JP-UAAngular contact ball bearing
Bore diameter (d)
45 mm
1.771654 in
Outside diameter (D)
100 mm
3.937008 in
Width (B)
25 mm
0.984252 in
69 kN43 kN6500 rpm9300 rpm0.85 kg850 g
FAG7309-B-XL-JP-UOAngular contact ball bearing
Bore diameter (d)
45 mm
1.771654 in
Outside diameter (D)
100 mm
3.937008 in
Width (B)
25 mm
0.984252 in
69 kN43 kN6500 rpm9300 rpm0.859 kg859 g
FAG7309-B-XL-MPAngular contact ball bearing
Bore diameter (d)
45 mm
1.771654 in
Outside diameter (D)
100 mm
3.937008 in
Width (B)
25 mm
0.984252 in
69 kN43 kN6500 rpm12100 rpm0.915 kg915 g
FAG7309-B-XL-MP-UAAngular contact ball bearing
Bore diameter (d)
45 mm
1.771654 in
Outside diameter (D)
100 mm
3.937008 in
Width (B)
25 mm
0.984252 in
69 kN43 kN6500 rpm12100 rpm0.92 kg920 g
FAG7309-B-XL-MP-UBAngular contact ball bearing
Bore diameter (d)
45 mm
1.771654 in
Outside diameter (D)
100 mm
3.937008 in
Width (B)
25 mm
0.984252 in
69 kN43 kN6500 rpm12100 rpm0.92 kg920 g
FAG7309-B-XL-MP-UOAngular contact ball bearing
Bore diameter (d)
45 mm
1.771654 in
Outside diameter (D)
100 mm
3.937008 in
Width (B)
25 mm
0.984252 in
69 kN43 kN6500 rpm12100 rpm0.92 kg920 g
FAG7309-B-XL-TVPAngular contact ball bearing
Bore diameter (d)
45 mm
1.771654 in
Outside diameter (D)
100 mm
3.937008 in
Width (B)
25 mm
0.984252 in
69 kN43 kN6500 rpm9300 rpm0.81 kg810 g
FAG7309-B-XL-TVP-P5-ULAngular contact ball bearing
Bore diameter (d)
45 mm
1.771654 in
Outside diameter (D)
100 mm
3.937008 in
Width (B)
25 mm
0.984252 in
69 kN43 kN6500 rpm9300 rpm0.829 kg829 g
FAG7309-B-XL-TVP-UAAngular contact ball bearing
Bore diameter (d)
45 mm
1.771654 in
Outside diameter (D)
100 mm
3.937008 in
Width (B)
25 mm
0.984252 in
69 kN43 kN6500 rpm9300 rpm0.815 kg815 g
FAG7309-B-XL-TVP-UBAngular contact ball bearing
Bore diameter (d)
45 mm
1.771654 in
Outside diameter (D)
100 mm
3.937008 in
Width (B)
25 mm
0.984252 in
69 kN43 kN6500 rpm9300 rpm0.829 kg829 g
FAG7309-B-XL-TVP-UOAngular contact ball bearing
Bore diameter (d)
45 mm
1.771654 in
Outside diameter (D)
100 mm
3.937008 in
Width (B)
25 mm
0.984252 in
69 kN43 kN6500 rpm9300 rpm0.815 kg815 g
TIMKEN7309WNAngular contact ball bearing
Recorded bore (d)
45 mm
1.771654 in
Recorded outside dimension (D)
100 mm
3.937008 in
Catalogue width (symbol unverified)
25 mm
0.984252 in
58.3 kN40.1 kN——0.89 kg890 g
TIMKEN7309WNMBRSUAngular contact ball bearing
Recorded bore (d)
45 mm
1.771654 in
Recorded outside dimension (D)
100 mm
3.937008 in
Catalogue width (symbol unverified)
25 mm
0.984252 in
58.3 kN40.1 kN——0.89 kg890 g
TIMKEN7309WNSUAngular contact ball bearing
Recorded bore (d)
45 mm
1.771654 in
Recorded outside dimension (D)
100 mm
3.937008 in
Catalogue width (symbol unverified)
25 mm
0.984252 in
58.3 kN40.1 kN——0.89 kg890 g
NSK7309AWAngular contact ball bearing
Bore diameter (d)
45 mm
1.771654 in
Outside diameter (D)
100 mm
3.937008 in
Individual bearing width (B)
25 mm
0.984252 in
70 kN43.5 kN——0.848 kg848 g
NSK7309AWDBAngular contact ball bearing
Bore diameter (d)
45 mm
1.771654 in
Outside diameter (D)
100 mm
3.937008 in
Catalogue width (symbol unverified)
50 mm
1.968504 in
113 kN87 kN———
NSK7309AWDFAngular contact ball bearing
Bore diameter (d)
45 mm
1.771654 in
Outside diameter (D)
100 mm
3.937008 in
Catalogue width (symbol unverified)
50 mm
1.968504 in
113 kN87 kN———
NSK7309AWDTAngular contact ball bearing
Bore diameter (d)
45 mm
1.771654 in
Outside diameter (D)
100 mm
3.937008 in
Catalogue width (symbol unverified)
50 mm
1.968504 in
113 kN87 kN———
NSK7309BEAT85Angular contact ball bearing
Bore diameter (d)
45 mm
1.771654 in
Outside diameter (D)
100 mm
3.937008 in
Individual bearing width (B)
25 mm
0.984252 in
65.5 kN39.5 kN——0.823 kg823 g
NSK7309BEAWAngular contact ball bearing
Bore diameter (d)
45 mm
1.771654 in
Outside diameter (D)
100 mm
3.937008 in
Individual bearing width (B)
25 mm
0.984252 in
65.5 kN39.5 kN——0.86 kg860 g
NSK7309BEAWDBAngular contact ball bearing
Bore diameter (d)
45 mm
1.771654 in
Outside diameter (D)
100 mm
3.937008 in
Catalogue width (symbol unverified)
50 mm
1.968504 in
107 kN79.5 kN———
NSK7309BEAWDFAngular contact ball bearing
Bore diameter (d)
45 mm
1.771654 in
Outside diameter (D)
100 mm
3.937008 in
Catalogue width (symbol unverified)
50 mm
1.968504 in
107 kN79.5 kN———
NSK7309BEAWDTAngular contact ball bearing
Bore diameter (d)
45 mm
1.771654 in
Outside diameter (D)
100 mm
3.937008 in
Catalogue width (symbol unverified)
50 mm
1.968504 in
107 kN79.5 kN———
KOYO7309BAngular contact ball bearing
Bore diameter (d)
45 mm
1.771654 in
Outside diameter (D)
100 mm
3.937008 in
Width (B)
25 mm
0.984252 in
67 kN37.2 kN—4900 rpmLimiting Speeds(Grease Lub.): 4900 min-1Limiting Speeds(Oil Lub.): 6500 min-10.875 kg875 g
KOYO7309BDBAngular contact ball bearing
Bore diameter (d)
45 mm
1.771654 in
Outside diameter (D)
100 mm
3.937008 in
Width (B)
50 mm
1.968504 in
109 kN74.3 kN—3900 rpmLimiting Speeds(Grease Lub.): 3900 min-1Limiting Speeds(Oil Lub.): 5200 min-11.75 kg1750 g
KOYO7309BDB FYAngular contact ball bearing
Bore diameter (d)
45 mm
1.771654 in
Outside diameter (D)
100 mm
3.937008 in
Width (B)
50 mm
1.968504 in
103 kN68.2 kN—4900 rpmLimiting Speeds(Grease Lub.): 4900 min-1Limiting Speeds(Oil Lub.): 6600 min-11.75 kg1750 g
KOYO7309BDFAngular contact ball bearing
Bore diameter (d)
45 mm
1.771654 in
Outside diameter (D)
100 mm
3.937008 in
Width (B)
50 mm
1.968504 in
109 kN74.3 kN—3900 rpmLimiting Speeds(Grease Lub.): 3900 min-1Limiting Speeds(Oil Lub.): 5200 min-11.75 kg1750 g
KOYO7309BDF FYAngular contact ball bearing
Bore diameter (d)
45 mm
1.771654 in
Outside diameter (D)
100 mm
3.937008 in
Width (B)
50 mm
1.968504 in
103 kN68.2 kN—4900 rpmLimiting Speeds(Grease Lub.): 4900 min-1Limiting Speeds(Oil Lub.): 6600 min-11.75 kg1750 g
KOYO7309BDTAngular contact ball bearing
Bore diameter (d)
45 mm
1.771654 in
Outside diameter (D)
100 mm
3.937008 in
Width (B)
50 mm
1.968504 in
109 kN74.3 kN—3900 rpmLimiting Speeds(Grease Lub.): 3900 min-1Limiting Speeds(Oil Lub.): 5200 min-11.75 kg1750 g
KOYO7309BDT FYAngular contact ball bearing
Bore diameter (d)
45 mm
1.771654 in
Outside diameter (D)
100 mm
3.937008 in
Width (B)
50 mm
1.968504 in
103 kN68.2 kN—4900 rpmLimiting Speeds(Grease Lub.): 4900 min-1Limiting Speeds(Oil Lub.): 6600 min-11.75 kg1750 g
KOYO7309B FYAngular contact ball bearing
Bore diameter (d)
45 mm
1.771654 in
Outside diameter (D)
100 mm
3.937008 in
Width (B)
25 mm
0.984252 in
63.2 kN34.1 kN—6200 rpmLimiting Speeds(Grease Lub.): 6200 min-1Limiting Speeds(Oil Lub.): 8200 min-10.875 kg875 g
KOYO7309CAngular contact ball bearing
Bore diameter (d)
45 mm
1.771654 in
Outside diameter (D)
100 mm
3.937008 in
Width (B)
25 mm
0.984252 in
78.4 kN43.4 kN—8800 rpmLimiting Speeds(Grease Lub.): 8800 min-1Limiting Speeds(Oil Lub.): 12000 min-10.875 kg875 g
KOYO7309CDBAngular contact ball bearing
Bore diameter (d)
45 mm
1.771654 in
Outside diameter (D)
100 mm
3.937008 in
Width (B)
50 mm
1.968504 in
127 kN86.7 kN—7200 rpmLimiting Speeds(Grease Lub.): 7200 min-1Limiting Speeds(Oil Lub.): 9600 min-11.75 kg1750 g
KOYO7309CDB FYAngular contact ball bearing
Bore diameter (d)
45 mm
1.771654 in
Outside diameter (D)
100 mm
3.937008 in
Width (B)
50 mm
1.968504 in
120 kN79.5 kN—9000 rpmLimiting Speeds(Grease Lub.): 9000 min-1Limiting Speeds(Oil Lub.): 12000 min-11.75 kg1750 g
KOYO7309CDFAngular contact ball bearing
Bore diameter (d)
45 mm
1.771654 in
Outside diameter (D)
100 mm
3.937008 in
Width (B)
50 mm
1.968504 in
127 kN86.7 kN—7200 rpmLimiting Speeds(Grease Lub.): 7200 min-1Limiting Speeds(Oil Lub.): 9600 min-11.75 kg1750 g
KOYO7309CDF FYAngular contact ball bearing
Bore diameter (d)
45 mm
1.771654 in
Outside diameter (D)
100 mm
3.937008 in
Width (B)
50 mm
1.968504 in
120 kN79.5 kN—9000 rpmLimiting Speeds(Grease Lub.): 9000 min-1Limiting Speeds(Oil Lub.): 12000 min-11.75 kg1750 g
KOYO7309CDTAngular contact ball bearing
Bore diameter (d)
45 mm
1.771654 in
Outside diameter (D)
100 mm
3.937008 in
Width (B)
50 mm
1.968504 in
127 kN86.7 kN—7200 rpmLimiting Speeds(Grease Lub.): 7200 min-1Limiting Speeds(Oil Lub.): 9600 min-11.75 kg1750 g
KOYO7309CDT FYAngular contact ball bearing
Bore diameter (d)
45 mm
1.771654 in
Outside diameter (D)
100 mm
3.937008 in
Width (B)
50 mm
1.968504 in
120 kN79.5 kN—9000 rpmLimiting Speeds(Grease Lub.): 9000 min-1Limiting Speeds(Oil Lub.): 12000 min-11.75 kg1750 g
KOYO7309C FYAngular contact ball bearing
Bore diameter (d)
45 mm
1.771654 in
Outside diameter (D)
100 mm
3.937008 in
Width (B)
25 mm
0.984252 in
74 kN39.7 kN—11000 rpmLimiting Speeds(Grease Lub.): 11000 min-1Limiting Speeds(Oil Lub.): 15000 min-10.875 kg875 g
KOYO7309DBAngular contact ball bearing
Bore diameter (d)
45 mm
1.771654 in
Outside diameter (D)
100 mm
3.937008 in
Width (B)
50 mm
1.968504 in
119 kN80.9 kN—5200 rpmLimiting Speeds(Grease Lub.): 5200 min-1Limiting Speeds(Oil Lub.): 6500 min-11.75 kg1750 g
KOYO7309DB FYAngular contact ball bearing
Bore diameter (d)
45 mm
1.771654 in
Outside diameter (D)
100 mm
3.937008 in
Width (B)
50 mm
1.968504 in
112 kN74.2 kN—6600 rpmLimiting Speeds(Grease Lub.): 6600 min-1Limiting Speeds(Oil Lub.): 8200 min-11.75 kg1750 g
KOYO7309DFAngular contact ball bearing
Bore diameter (d)
45 mm
1.771654 in
Outside diameter (D)
100 mm
3.937008 in
Width (B)
50 mm
1.968504 in
119 kN80.9 kN—5200 rpmLimiting Speeds(Grease Lub.): 5200 min-1Limiting Speeds(Oil Lub.): 6500 min-11.75 kg1750 g
KOYO7309DF FYAngular contact ball bearing
Bore diameter (d)
45 mm
1.771654 in
Outside diameter (D)
100 mm
3.937008 in
Width (B)
50 mm
1.968504 in
112 kN74.2 kN—6600 rpmLimiting Speeds(Grease Lub.): 6600 min-1Limiting Speeds(Oil Lub.): 8200 min-11.75 kg1750 g
KOYO7309DTAngular contact ball bearing
Bore diameter (d)
45 mm
1.771654 in
Outside diameter (D)
100 mm
3.937008 in
Width (B)
50 mm
1.968504 in
119 kN80.9 kN—5200 rpmLimiting Speeds(Grease Lub.): 5200 min-1Limiting Speeds(Oil Lub.): 6500 min-11.75 kg1750 g
KOYO7309DT FYAngular contact ball bearing
Bore diameter (d)
45 mm
1.771654 in
Outside diameter (D)
100 mm
3.937008 in
Width (B)
50 mm
1.968504 in
112 kN74.2 kN—6600 rpmLimiting Speeds(Grease Lub.): 6600 min-1Limiting Speeds(Oil Lub.): 8200 min-11.75 kg1750 g
KOYO7309 FYAngular contact ball bearing
Bore diameter (d)
45 mm
1.771654 in
Outside diameter (D)
100 mm
3.937008 in
Width (B)
25 mm
0.984252 in
68.9 kN37.1 kN—8200 rpmLimiting Speeds(Grease Lub.): 8200 min-1Limiting Speeds(Oil Lub.): 10000 min-10.875 kg875 g
Compare recorded seals, clearance, precision and materials

Manufacturer wording is retained. A missing property is not inferred from another brand or a similar suffix.

Brand / designationClosureOriginal precisionClearanceCageMaterialLubricant
KOYO 7309Not recordedNot recordedNot recordedNot recordedNot recordedNot recorded
SKF 7309 ACCBMWithoutP6Not recordedMachined brassBearing steelNone
SKF 7309 BE-2RZPSeal on both sidesNormalNot recordedNon-metallicBearing steelGrease
SKF 7309 BECAPWithoutP6Not recordedNon-metallicBearing steelNone
SKF 7309 BECBJWithoutP6Not recordedSteel sheet metalBearing steelNone
SKF 7309 BECBMWithoutP6Not recordedMachined brassBearing steelNone
SKF 7309 BECBM/W64WithoutNot recordedNot recordedMachined brassBearing steelSolid Oil
SKF 7309 BECBPWithoutP6Not recordedNon-metallicBearing steelNone
SKF 7309 BECBP/W64WithoutNot recordedNot recordedNon-metallicBearing steelSolid Oil
SKF 7309 BECBYWithoutP6Not recordedBrass sheet metalBearing steelNone
SKF 7309 BEGAMWithoutP6Not recordedMachined brassBearing steelNone
SKF 7309 BEGAPWithoutP6Not recordedNon-metallicBearing steelNone
SKF 7309 BEGAPHWithoutP6Not recordedNon-metallicBearing steelNone
SKF 7309 BEGBPWithoutP6Not recordedNon-metallicBearing steelNone
SKF 7309 BEGBYWithoutP6Not recordedBrass sheet metalBearing steelNone
SKF 7309 BEPWithoutNormalNot recordedNon-metallicBearing steelNone
FAG 7309-B-XL-JPWithout — Not sealedP6 — Class 6 (ISO 492:2023)Not recordedJP — Steel sheet metalNot recordedWithout — Bearing not greased
FAG 7309-B-XL-JP-S1-UOWithout — Not sealedP6 — Class 6 (ISO 492:2023)Not recordedJP — Steel sheet metalNot recordedWithout — Bearing not greased
FAG 7309-B-XL-JP-UAWithout — Not sealedP6 — Class 6 (ISO 492:2023)Not recordedJP — Steel sheet metalNot recordedWithout — Bearing not greased
FAG 7309-B-XL-JP-UOWithout — Not sealedP6 — Class 6 (ISO 492:2023)Not recordedJP — Steel sheet metalNot recordedWithout — Bearing not greased
FAG 7309-B-XL-MPWithout — Not sealedP6 — Class 6 (ISO 492:2023)Not recordedMP — Solid brass cage, ball guidedNot recordedWithout — Bearing not greased
FAG 7309-B-XL-MP-UAWithout — Not sealedP6 — Class 6 (ISO 492:2023)Not recordedMP — Solid brass cage, ball guidedNot recordedWithout — Bearing not greased
FAG 7309-B-XL-MP-UBWithout — Not sealedP6 — Class 6 (ISO 492:2023)Not recordedMP — Solid brass cage, ball guidedNot recordedWithout — Bearing not greased
FAG 7309-B-XL-MP-UOWithout — Not sealedP6 — Class 6 (ISO 492:2023)Not recordedMP — Solid brass cage, ball guidedNot recordedWithout — Bearing not greased
FAG 7309-B-XL-TVPWithout — Not sealedP6 — Class 6 (ISO 492:2023)Not recordedTVP — Solid cage made of glass-fiber reinforced polyamid PA66Not recordedWithout — Bearing not greased
FAG 7309-B-XL-TVP-P5-ULWithout — Not sealedP5 — Class 5 (ISO 492:2023)Not recordedTVP — Solid cage made of glass-fiber reinforced polyamid PA66Not recordedWithout — Bearing not greased
FAG 7309-B-XL-TVP-UAWithout — Not sealedP6 — Class 6 (ISO 492:2023)Not recordedTVP — Solid cage made of glass-fiber reinforced polyamid PA66Not recordedWithout — Bearing not greased
FAG 7309-B-XL-TVP-UBWithout — Not sealedP6 — Class 6 (ISO 492:2023)Not recordedTVP — Solid cage made of glass-fiber reinforced polyamid PA66Not recordedWithout — Bearing not greased
FAG 7309-B-XL-TVP-UOWithout — Not sealedP6 — Class 6 (ISO 492:2023)Not recordedTVP — Solid cage made of glass-fiber reinforced polyamid PA66Not recordedWithout — Bearing not greased
TIMKEN 7309WNOpenNot recordedNot recordedBrass cageNot recordedNot recorded
TIMKEN 7309WNMBRSUOpenNot recordedNot recordedBrass cageNot recordedNot recorded
TIMKEN 7309WNSUOpenNot recordedNot recordedBrass cageNot recordedNot recorded
NSK 7309AWNot recordedNot recordedNot recordedPressed steelNot recordedNot recorded
NSK 7309AWDBNot recordedNot recordedNot recordedPressed steelNot recordedNot recorded
NSK 7309AWDFNot recordedNot recordedNot recordedPressed steelNot recordedNot recorded
NSK 7309AWDTNot recordedNot recordedNot recordedPressed steelNot recordedNot recorded
NSK 7309BEAT85Not recordedNot recordedNot recordedPolyamide 46 resinNot recordedNot recorded
NSK 7309BEAWNot recordedNot recordedNot recordedPressed steelNot recordedNot recorded
NSK 7309BEAWDBNot recordedNot recordedNot recordedPressed steelNot recordedNot recorded
NSK 7309BEAWDFNot recordedNot recordedNot recordedPressed steelNot recordedNot recorded
NSK 7309BEAWDTNot recordedNot recordedNot recordedPressed steelNot recordedNot recorded
KOYO 7309BNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 7309BDBNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 7309BDB FYNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 7309BDFNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 7309BDF FYNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 7309BDTNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 7309BDT FYNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 7309B FYNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 7309CNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 7309CDBNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 7309CDB FYNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 7309CDFNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 7309CDF FYNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 7309CDTNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 7309CDT FYNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 7309C FYNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 7309DBNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 7309DB FYNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 7309DFNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 7309DF FYNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 7309DTNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 7309DT FYNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 7309 FYNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded

How to compare these values

  • Use the displayed dimension names and original symbols. Housing length L, height H2 and flange width are not bearing outside diameter D. A catalogue width with an unverified symbol must not be assumed to be inner-ring width B or assembly width T. Open the product record for mounting dimensions and geometry.
  • Inch values are calculated from the recorded millimetres using 25.4 mm per inch, rounded to six decimal places. They do not change a metric bearing into an inch-series bearing. Gram values are converted from the recorded mass in kilograms.
  • C and C0 describe different rating conditions. They are not a single safe working-load limit and cannot replace an application load calculation.
  • Reference and limiting speeds are separate catalogue values. The source grease/oil context is shown where recorded. Lubricant, seals, loads, fit, clearance and cooling affect the usable operating speed.
  • A common base number does not prove equivalent seals, clearance, precision, material or interchangeability. Open the full designation for these fields.
Check load calculations →Estimate rating life →Decode the complete marking →Check replacement evidence →

Related prefix matches — other model numbers may appear

These discovery results can contain a longer number or a different component. They are not specifications for the requested exact model. Open the complete product to inspect its original geometry.

KOYO

7309

Angular contact ball bearing

View full technical record →SKF

7309 ACCBM

Single row angular contact ball bearing

View full technical record →NSK

7309AW

Angular contact ball bearing

View full technical record →NSK

7309AWDB

Angular contact ball bearing

View full technical record →NSK

7309AWDF

Angular contact ball bearing

View full technical record →NSK

7309AWDT

Angular contact ball bearing

View full technical record →KOYO

7309B

Angular contact ball bearing

View full technical record →KOYO

7309BDB

Angular contact ball bearing

View full technical record →KOYO

7309BDB FY

Angular contact ball bearing

View full technical record →KOYO

7309BDF

Angular contact ball bearing

View full technical record →KOYO

7309BDF FY

Angular contact ball bearing

View full technical record →KOYO

7309BDT

Angular contact ball bearing

View full technical record →
Filter all 64 prefix results →

Check the drawing before substituting

Nominal dimensions are not shaft-fit tolerances. Different variants can add grooves, flanges, wider rings or assembly components. When the table has different dimensions, the complete designation—not the shared prefix—controls.

Measurement guide →Cross-reference checks →

Reference basis & data limits

Manufacturer terminology is retained in the product records. Technical reference basis: JTEKT Basic Bearing Knowledge (boundary dimensions, tolerance classes and lubrication); NSK Bearing ABCs (lubrication, designations and clearance); NTN technical FAQs (closure codes and component interchange); SKF rolling-bearing selection and maintenance references.

Selection workflows and catalogue grouping are BearingScope editorial aids. Verify the current drawing and application requirements before using a candidate. Missing database information is not converted into an assumed match.

Search the consolidated catalogue

Find, filter and compare bearing model data in one place.

Open model search