99,016 bearing records · search, filter and compare

info@bearingscope.com
Find · understand · compare

7308 bearing dimensions & suffix variants

Look up recorded dimensions for designations beginning with 7308. The table retains complete manufacturer designations so special suffixes and different dimensional variants remain visible.

On this page5 sections

Find by measured dimensions

Enter bore d, outside diameter D and width B. Use decimals or inch fractions such as 1/2 or 1 1/4.

For tapered assemblies use total width T; for units or flanged bearings also check the mounting drawing.

Exact model evidence

7308 dimensions and recorded technical data

The recorded 7308 base designation measures 40×90×23 mm (inside diameter d × outside diameter D × width B). This answer uses unsuffixed records from KOYO. It does not assign the same dimensions or operating ratings to every suffix.

The numeric series boundary is preserved: a longer number is not included merely because its first digits match. 71 recorded variants are listed. A dash means the value is missing, not zero.

Brand / full designationNamed dimensions (mm / in)Dynamic C (kN)Static C0 (kN)Reference speed (rpm)Limiting speed (rpm)Mass (kg / g)
KOYO7308Angular contact ball bearing
Bore diameter (d)
40 mm
1.574803 in
Outside diameter (D)
90 mm
3.543307 in
Width (B)
23 mm
0.905512 in
61 kN32.9 kN—7300 rpmLimiting Speeds(Grease Lub.): 7300 min-1Limiting Speeds(Oil Lub.): 9600 min-10.657 kg657 g
SKF7308 ACCBMSingle row angular contact ball bearing with 25° contact angle
Bore diameter (d)
40 mm
1.574803 in
Outside diameter (D)
90 mm
3.543307 in
Width (B)
23 mm
0.905512 in
56 kN36 kN10000 rpm15000 rpm0.674 kg674 g
SKF7308 BE-2RZPSingle row angular contact ball bearing with 40° contact angle and non-contact seals on both sides
Bore diameter (d)
40 mm
1.574803 in
Outside diameter (D)
90 mm
3.543307 in
Width (B)
23 mm
0.905512 in
46.2 kN30.5 kN10000 rpm7500 rpm0.621 kg621 g
SKF7308 BE-2RZP/GWFSingle row angular contact ball bearing with 40° contact angle and non-contact seals on both sides
Recorded bore (d)
40 mm
1.574803 in
Recorded outside dimension (D)
90 mm
3.543307 in
Catalogue width (symbol unverified)
23 mm
0.905512 in
46.2 kN30.5 kN9500 rpm7500 rpm0.621 kg621 g
SKF7308 BECAPSingle row angular contact ball bearing
Bore diameter (d)
40 mm
1.574803 in
Outside diameter (D)
90 mm
3.543307 in
Width (B)
23 mm
0.905512 in
50 kN32.5 kN10000 rpm10000 rpm0.611 kg611 g
SKF7308 BECBJSingle row angular contact ball bearing
Bore diameter (d)
40 mm
1.574803 in
Outside diameter (D)
90 mm
3.543307 in
Width (B)
23 mm
0.905512 in
50 kN32.5 kN10000 rpm10000 rpm0.641 kg641 g
SKF7308 BECBMSingle row angular contact ball bearing
Bore diameter (d)
40 mm
1.574803 in
Outside diameter (D)
90 mm
3.543307 in
Width (B)
23 mm
0.905512 in
50 kN32.5 kN10000 rpm13000 rpm0.674 kg674 g
SKF7308 BECBPSingle row angular contact ball bearing
Bore diameter (d)
40 mm
1.574803 in
Outside diameter (D)
90 mm
3.543307 in
Width (B)
23 mm
0.905512 in
50 kN32.5 kN10000 rpm10000 rpm0.611 kg611 g
SKF7308 BECBYSingle row angular contact ball bearing
Bore diameter (d)
40 mm
1.574803 in
Outside diameter (D)
90 mm
3.543307 in
Width (B)
23 mm
0.905512 in
50 kN32.5 kN10000 rpm10000 rpm0.64 kg640 g
SKF7308 BEGAMSingle row angular contact ball bearing
Bore diameter (d)
40 mm
1.574803 in
Outside diameter (D)
90 mm
3.543307 in
Width (B)
23 mm
0.905512 in
50 kN32.5 kN10000 rpm13000 rpm0.674 kg674 g
SKF7308 BEGAPSingle row angular contact ball bearing
Bore diameter (d)
40 mm
1.574803 in
Outside diameter (D)
90 mm
3.543307 in
Width (B)
23 mm
0.905512 in
50 kN32.5 kN10000 rpm10000 rpm0.611 kg611 g
SKF7308 BEGAPHSingle row angular contact ball bearing
Bore diameter (d)
40 mm
1.574803 in
Outside diameter (D)
90 mm
3.543307 in
Width (B)
23 mm
0.905512 in
50 kN32.5 kN10000 rpm10000 rpm0.611 kg611 g
SKF7308 BEGBMSingle row angular contact ball bearing
Bore diameter (d)
40 mm
1.574803 in
Outside diameter (D)
90 mm
3.543307 in
Width (B)
23 mm
0.905512 in
50 kN32.5 kN10000 rpm13000 rpm0.674 kg674 g
SKF7308 BEGBPSingle row angular contact ball bearing
Bore diameter (d)
40 mm
1.574803 in
Outside diameter (D)
90 mm
3.543307 in
Width (B)
23 mm
0.905512 in
50 kN32.5 kN10000 rpm10000 rpm0.611 kg611 g
SKF7308 BEGBYSingle row angular contact ball bearing
Bore diameter (d)
40 mm
1.574803 in
Outside diameter (D)
90 mm
3.543307 in
Width (B)
23 mm
0.905512 in
50 kN32.5 kN10000 rpm10000 rpm0.64 kg640 g
SKF7308 BEPSingle row angular contact ball bearing
Bore diameter (d)
40 mm
1.574803 in
Outside diameter (D)
90 mm
3.543307 in
Width (B)
23 mm
0.905512 in
46.2 kN30.5 kN10000 rpm9000 rpm0.611 kg611 g
SKF7308 BEP/VE295Single row angular contact ball bearing
Recorded bore (d)
40 mm
1.574803 in
Recorded outside dimension (D)
90 mm
3.543307 in
Catalogue width (symbol unverified)
23 mm
0.905512 in
46.2 kN30.5 kN10000 rpm9000 rpm0.611 kg611 g
FAG7308-B-XL-2RS-TVPAngular contact ball bearing
Bore diameter (d)
40 mm
1.574803 in
Outside diameter (D)
90 mm
3.543307 in
Width (B)
23 mm
0.905512 in
57 kN34.5 kN—4650 rpm0.631 kg631 g
FAG7308-B-XL-2RS-TVP-L100Angular contact ball bearing
Bore diameter (d)
40 mm
1.574803 in
Outside diameter (D)
90 mm
3.543307 in
Width (B)
23 mm
0.905512 in
57 kN34.5 kN—4650 rpm0.661 kg661 g
FAG7308-B-XL-2RS-TVP-L138Angular contact ball bearing
Bore diameter (d)
40 mm
1.574803 in
Outside diameter (D)
90 mm
3.543307 in
Width (B)
23 mm
0.905512 in
57 kN34.5 kN—4650 rpm0.66 kg660 g
FAG7308-B-XL-2RS-TVP-L198Angular contact ball bearing
Bore diameter (d)
40 mm
1.574803 in
Outside diameter (D)
90 mm
3.543307 in
Width (B)
23 mm
0.905512 in
57 kN34.5 kN—4650 rpm0.64 kg640 g
FAG7308-B-XL-2RS-TVP-L237Angular contact ball bearing
Bore diameter (d)
40 mm
1.574803 in
Outside diameter (D)
90 mm
3.543307 in
Width (B)
23 mm
0.905512 in
57 kN34.5 kN—4650 rpm0.631 kg631 g
FAG7308-B-XL-JPAngular contact ball bearing
Bore diameter (d)
40 mm
1.574803 in
Outside diameter (D)
90 mm
3.543307 in
Width (B)
23 mm
0.905512 in
57 kN34.5 kN7100 rpm10400 rpm0.633 kg633 g
FAG7308-B-XL-JP-UAAngular contact ball bearing
Bore diameter (d)
40 mm
1.574803 in
Outside diameter (D)
90 mm
3.543307 in
Width (B)
23 mm
0.905512 in
57 kN34.5 kN7100 rpm10400 rpm0.633 kg633 g
FAG7308-B-XL-JP-UOAngular contact ball bearing
Bore diameter (d)
40 mm
1.574803 in
Outside diameter (D)
90 mm
3.543307 in
Width (B)
23 mm
0.905512 in
57 kN34.5 kN7100 rpm10400 rpm0.633 kg633 g
FAG7308-B-XL-MPAngular contact ball bearing
Bore diameter (d)
40 mm
1.574803 in
Outside diameter (D)
90 mm
3.543307 in
Width (B)
23 mm
0.905512 in
57 kN34.5 kN7100 rpm13500 rpm0.68 kg680 g
FAG7308-B-XL-MPA-P5-ULAngular contact ball bearing
Bore diameter (d)
40 mm
1.574803 in
Outside diameter (D)
90 mm
3.543307 in
Width (B)
23 mm
0.905512 in
57 kN34.5 kN7100 rpm13500 rpm0.68 kg680 g
FAG7308-B-XL-MP-P5-ULAngular contact ball bearing
Bore diameter (d)
40 mm
1.574803 in
Outside diameter (D)
90 mm
3.543307 in
Width (B)
23 mm
0.905512 in
57 kN34.5 kN7100 rpm13500 rpm0.68 kg680 g
FAG7308-B-XL-MP-UAAngular contact ball bearing
Bore diameter (d)
40 mm
1.574803 in
Outside diameter (D)
90 mm
3.543307 in
Width (B)
23 mm
0.905512 in
57 kN34.5 kN7100 rpm13500 rpm0.68 kg680 g
FAG7308-B-XL-MP-UBAngular contact ball bearing
Bore diameter (d)
40 mm
1.574803 in
Outside diameter (D)
90 mm
3.543307 in
Width (B)
23 mm
0.905512 in
57 kN34.5 kN7100 rpm13500 rpm0.68 kg680 g
FAG7308-B-XL-MP-UOAngular contact ball bearing
Bore diameter (d)
40 mm
1.574803 in
Outside diameter (D)
90 mm
3.543307 in
Width (B)
23 mm
0.905512 in
57 kN34.5 kN7100 rpm13500 rpm0.68 kg680 g
FAG7308-B-XL-TVPAngular contact ball bearing
Bore diameter (d)
40 mm
1.574803 in
Outside diameter (D)
90 mm
3.543307 in
Width (B)
23 mm
0.905512 in
57 kN34.5 kN7100 rpm10400 rpm0.616 kg616 g
FAG7308-B-XL-TVP-P5-ULAngular contact ball bearing
Bore diameter (d)
40 mm
1.574803 in
Outside diameter (D)
90 mm
3.543307 in
Width (B)
23 mm
0.905512 in
57 kN34.5 kN7100 rpm10400 rpm0.631 kg631 g
FAG7308-B-XL-TVP-UAAngular contact ball bearing
Bore diameter (d)
40 mm
1.574803 in
Outside diameter (D)
90 mm
3.543307 in
Width (B)
23 mm
0.905512 in
57 kN34.5 kN7100 rpm10400 rpm0.616 kg616 g
FAG7308-B-XL-TVP-UBAngular contact ball bearing
Bore diameter (d)
40 mm
1.574803 in
Outside diameter (D)
90 mm
3.543307 in
Width (B)
23 mm
0.905512 in
57 kN34.5 kN7100 rpm10400 rpm0.62 kg620 g
FAG7308-B-XL-TVP-UOAngular contact ball bearing
Bore diameter (d)
40 mm
1.574803 in
Outside diameter (D)
90 mm
3.543307 in
Width (B)
23 mm
0.905512 in
57 kN34.5 kN7100 rpm10400 rpm0.62 kg620 g
TIMKEN7308WNAngular contact ball bearing
Recorded bore (d)
40 mm
1.574803 in
Recorded outside dimension (D)
90 mm
3.543307 in
Catalogue width (symbol unverified)
23 mm
0.905512 in
44.9 kN30.2 kN——0.67 kg670 g
TIMKEN7308WNMBRSUAngular contact ball bearing
Recorded bore (d)
40 mm
1.574803 in
Recorded outside dimension (D)
90 mm
3.543307 in
Catalogue width (symbol unverified)
23 mm
0.905512 in
44.9 kN30.2 kN——0.67 kg670 g
TIMKEN7308WNSUAngular contact ball bearing
Recorded bore (d)
40 mm
1.574803 in
Recorded outside dimension (D)
90 mm
3.543307 in
Catalogue width (symbol unverified)
23 mm
0.905512 in
44.9 kN30.2 kN——0.67 kg670 g
NSK7308AWAngular contact ball bearing
Bore diameter (d)
40 mm
1.574803 in
Outside diameter (D)
90 mm
3.543307 in
Individual bearing width (B)
23 mm
0.905512 in
53.5 kN33 kN——0.633 kg633 g
NSK7308AWDBAngular contact ball bearing
Bore diameter (d)
40 mm
1.574803 in
Outside diameter (D)
90 mm
3.543307 in
Catalogue width (symbol unverified)
46 mm
1.811024 in
87 kN66 kN———
NSK7308AWDFAngular contact ball bearing
Bore diameter (d)
40 mm
1.574803 in
Outside diameter (D)
90 mm
3.543307 in
Catalogue width (symbol unverified)
46 mm
1.811024 in
87 kN66 kN———
NSK7308AWDTAngular contact ball bearing
Bore diameter (d)
40 mm
1.574803 in
Outside diameter (D)
90 mm
3.543307 in
Catalogue width (symbol unverified)
46 mm
1.811024 in
87 kN66 kN———
NSK7308BEAT85Angular contact ball bearing
Bore diameter (d)
40 mm
1.574803 in
Outside diameter (D)
90 mm
3.543307 in
Individual bearing width (B)
23 mm
0.905512 in
55.5 kN33 kN——0.619 kg619 g
NSK7308BEAWAngular contact ball bearing
Bore diameter (d)
40 mm
1.574803 in
Outside diameter (D)
90 mm
3.543307 in
Individual bearing width (B)
23 mm
0.905512 in
55.5 kN33 kN——0.644 kg644 g
NSK7308BEAWDBAngular contact ball bearing
Bore diameter (d)
40 mm
1.574803 in
Outside diameter (D)
90 mm
3.543307 in
Catalogue width (symbol unverified)
46 mm
1.811024 in
90.5 kN65.5 kN———
NSK7308BEAWDFAngular contact ball bearing
Bore diameter (d)
40 mm
1.574803 in
Outside diameter (D)
90 mm
3.543307 in
Catalogue width (symbol unverified)
46 mm
1.811024 in
90.5 kN65.5 kN———
NSK7308BEAWDTAngular contact ball bearing
Bore diameter (d)
40 mm
1.574803 in
Outside diameter (D)
90 mm
3.543307 in
Catalogue width (symbol unverified)
46 mm
1.811024 in
90.5 kN65.5 kN———
KOYO7308BAngular contact ball bearing
Bore diameter (d)
40 mm
1.574803 in
Outside diameter (D)
90 mm
3.543307 in
Width (B)
23 mm
0.905512 in
56 kN30.3 kN—5500 rpmLimiting Speeds(Grease Lub.): 5500 min-1Limiting Speeds(Oil Lub.): 7300 min-10.657 kg657 g
KOYO7308BDBAngular contact ball bearing
Bore diameter (d)
40 mm
1.574803 in
Outside diameter (D)
90 mm
3.543307 in
Width (B)
46 mm
1.811024 in
91 kN60.6 kN—4400 rpmLimiting Speeds(Grease Lub.): 4400 min-1Limiting Speeds(Oil Lub.): 5900 min-11.31 kg1310 g
KOYO7308BDB FYAngular contact ball bearing
Bore diameter (d)
40 mm
1.574803 in
Outside diameter (D)
90 mm
3.543307 in
Width (B)
46 mm
1.811024 in
80.6 kN50.5 kN—5500 rpmLimiting Speeds(Grease Lub.): 5500 min-1Limiting Speeds(Oil Lub.): 7400 min-11.31 kg1310 g
KOYO7308BDFAngular contact ball bearing
Bore diameter (d)
40 mm
1.574803 in
Outside diameter (D)
90 mm
3.543307 in
Width (B)
46 mm
1.811024 in
91 kN60.6 kN—4400 rpmLimiting Speeds(Grease Lub.): 4400 min-1Limiting Speeds(Oil Lub.): 5900 min-11.31 kg1310 g
KOYO7308BDF FYAngular contact ball bearing
Bore diameter (d)
40 mm
1.574803 in
Outside diameter (D)
90 mm
3.543307 in
Width (B)
46 mm
1.811024 in
80.6 kN50.5 kN—5500 rpmLimiting Speeds(Grease Lub.): 5500 min-1Limiting Speeds(Oil Lub.): 7400 min-11.31 kg1310 g
KOYO7308BDTAngular contact ball bearing
Bore diameter (d)
40 mm
1.574803 in
Outside diameter (D)
90 mm
3.543307 in
Width (B)
46 mm
1.811024 in
91 kN60.6 kN—4400 rpmLimiting Speeds(Grease Lub.): 4400 min-1Limiting Speeds(Oil Lub.): 5900 min-11.31 kg1310 g
KOYO7308BDT FYAngular contact ball bearing
Bore diameter (d)
40 mm
1.574803 in
Outside diameter (D)
90 mm
3.543307 in
Width (B)
46 mm
1.811024 in
80.6 kN50.5 kN—5500 rpmLimiting Speeds(Grease Lub.): 5500 min-1Limiting Speeds(Oil Lub.): 7400 min-11.31 kg1310 g
KOYO7308B FYAngular contact ball bearing
Bore diameter (d)
40 mm
1.574803 in
Outside diameter (D)
90 mm
3.543307 in
Width (B)
23 mm
0.905512 in
49.6 kN25.2 kN—6900 rpmLimiting Speeds(Grease Lub.): 6900 min-1Limiting Speeds(Oil Lub.): 9200 min-10.657 kg657 g
KOYO7308CAngular contact ball bearing
Bore diameter (d)
40 mm
1.574803 in
Outside diameter (D)
90 mm
3.543307 in
Width (B)
23 mm
0.905512 in
65.4 kN35.3 kN—10000 rpmLimiting Speeds(Grease Lub.): 10000 min-1Limiting Speeds(Oil Lub.): 13000 min-10.657 kg657 g
KOYO7308CDBAngular contact ball bearing
Bore diameter (d)
40 mm
1.574803 in
Outside diameter (D)
90 mm
3.543307 in
Width (B)
46 mm
1.811024 in
106 kN70.5 kN—8000 rpmLimiting Speeds(Grease Lub.): 8000 min-1Limiting Speeds(Oil Lub.): 11000 min-11.31 kg1310 g
KOYO7308CDB FYAngular contact ball bearing
Bore diameter (d)
40 mm
1.574803 in
Outside diameter (D)
90 mm
3.543307 in
Width (B)
46 mm
1.811024 in
94.1 kN58.8 kN—10000 rpmLimiting Speeds(Grease Lub.): 10000 min-1Limiting Speeds(Oil Lub.): 14000 min-11.31 kg1310 g
KOYO7308CDFAngular contact ball bearing
Bore diameter (d)
40 mm
1.574803 in
Outside diameter (D)
90 mm
3.543307 in
Width (B)
46 mm
1.811024 in
106 kN70.5 kN—8000 rpmLimiting Speeds(Grease Lub.): 8000 min-1Limiting Speeds(Oil Lub.): 11000 min-11.31 kg1310 g
KOYO7308CDF FYAngular contact ball bearing
Bore diameter (d)
40 mm
1.574803 in
Outside diameter (D)
90 mm
3.543307 in
Width (B)
46 mm
1.811024 in
94.1 kN58.8 kN—10000 rpmLimiting Speeds(Grease Lub.): 10000 min-1Limiting Speeds(Oil Lub.): 14000 min-11.31 kg1310 g
KOYO7308CDTAngular contact ball bearing
Bore diameter (d)
40 mm
1.574803 in
Outside diameter (D)
90 mm
3.543307 in
Width (B)
46 mm
1.811024 in
106 kN70.5 kN—8000 rpmLimiting Speeds(Grease Lub.): 8000 min-1Limiting Speeds(Oil Lub.): 11000 min-11.31 kg1310 g
KOYO7308CDT FYAngular contact ball bearing
Bore diameter (d)
40 mm
1.574803 in
Outside diameter (D)
90 mm
3.543307 in
Width (B)
46 mm
1.811024 in
94.1 kN58.8 kN—10000 rpmLimiting Speeds(Grease Lub.): 10000 min-1Limiting Speeds(Oil Lub.): 14000 min-11.31 kg1310 g
KOYO7308C FYAngular contact ball bearing
Bore diameter (d)
40 mm
1.574803 in
Outside diameter (D)
90 mm
3.543307 in
Width (B)
23 mm
0.905512 in
57.9 kN29.4 kN—13000 rpmLimiting Speeds(Grease Lub.): 13000 min-1Limiting Speeds(Oil Lub.): 17000 min-10.657 kg657 g
KOYO7308DBAngular contact ball bearing
Bore diameter (d)
40 mm
1.574803 in
Outside diameter (D)
90 mm
3.543307 in
Width (B)
46 mm
1.811024 in
99.1 kN65.9 kN—5900 rpmLimiting Speeds(Grease Lub.): 5900 min-1Limiting Speeds(Oil Lub.): 7300 min-11.31 kg1310 g
KOYO7308DB FYAngular contact ball bearing
Bore diameter (d)
40 mm
1.574803 in
Outside diameter (D)
90 mm
3.543307 in
Width (B)
46 mm
1.811024 in
87.8 kN54.9 kN—7400 rpmLimiting Speeds(Grease Lub.): 7400 min-1Limiting Speeds(Oil Lub.): 9200 min-11.31 kg1310 g
KOYO7308DFAngular contact ball bearing
Bore diameter (d)
40 mm
1.574803 in
Outside diameter (D)
90 mm
3.543307 in
Width (B)
46 mm
1.811024 in
99.1 kN65.9 kN—5900 rpmLimiting Speeds(Grease Lub.): 5900 min-1Limiting Speeds(Oil Lub.): 7300 min-11.31 kg1310 g
KOYO7308DF FYAngular contact ball bearing
Bore diameter (d)
40 mm
1.574803 in
Outside diameter (D)
90 mm
3.543307 in
Width (B)
46 mm
1.811024 in
87.8 kN54.9 kN—7400 rpmLimiting Speeds(Grease Lub.): 7400 min-1Limiting Speeds(Oil Lub.): 9200 min-11.31 kg1310 g
KOYO7308DTAngular contact ball bearing
Bore diameter (d)
40 mm
1.574803 in
Outside diameter (D)
90 mm
3.543307 in
Width (B)
46 mm
1.811024 in
99.1 kN65.9 kN—5900 rpmLimiting Speeds(Grease Lub.): 5900 min-1Limiting Speeds(Oil Lub.): 7300 min-11.31 kg1310 g
KOYO7308DT FYAngular contact ball bearing
Bore diameter (d)
40 mm
1.574803 in
Outside diameter (D)
90 mm
3.543307 in
Width (B)
46 mm
1.811024 in
87.8 kN54.9 kN—7400 rpmLimiting Speeds(Grease Lub.): 7400 min-1Limiting Speeds(Oil Lub.): 9200 min-11.31 kg1310 g
KOYO7308 FYAngular contact ball bearing
Bore diameter (d)
40 mm
1.574803 in
Outside diameter (D)
90 mm
3.543307 in
Width (B)
23 mm
0.905512 in
54 kN27.4 kN—9200 rpmLimiting Speeds(Grease Lub.): 9200 min-1Limiting Speeds(Oil Lub.): 12000 min-10.657 kg657 g
Compare recorded seals, clearance, precision and materials

Manufacturer wording is retained. A missing property is not inferred from another brand or a similar suffix.

Brand / designationClosureOriginal precisionClearanceCageMaterialLubricant
KOYO 7308Not recordedNot recordedNot recordedNot recordedNot recordedNot recorded
SKF 7308 ACCBMWithoutP6Not recordedMachined brassBearing steelNone
SKF 7308 BE-2RZPSeal on both sidesNormalNot recordedNon-metallicBearing steelGrease
SKF 7308 BE-2RZP/GWFSeal on both sidesNot recordedNot recordedNon-metallicBearing steelGrease
SKF 7308 BECAPWithoutP6Not recordedNon-metallicBearing steelNone
SKF 7308 BECBJWithoutP6Not recordedSteel sheet metalBearing steelNone
SKF 7308 BECBMWithoutP6Not recordedMachined brassBearing steelNone
SKF 7308 BECBPWithoutP6Not recordedNon-metallicBearing steelNone
SKF 7308 BECBYWithoutP6Not recordedBrass sheet metalBearing steelNone
SKF 7308 BEGAMWithoutP6Not recordedMachined brassBearing steelNone
SKF 7308 BEGAPWithoutP6Not recordedNon-metallicBearing steelNone
SKF 7308 BEGAPHWithoutP6Not recordedNon-metallicBearing steelNone
SKF 7308 BEGBMWithoutP6Not recordedMachined brassBearing steelNone
SKF 7308 BEGBPWithoutP6Not recordedNon-metallicBearing steelNone
SKF 7308 BEGBYWithoutP6Not recordedBrass sheet metalBearing steelNone
SKF 7308 BEPWithoutNormalNot recordedNon-metallicBearing steelNone
SKF 7308 BEP/VE295WithoutNot recordedNot recordedNon-metallicBearing steelNot recorded
FAG 7308-B-XL-2RS-TVP2RS — Contact seal on both sidesP6 — Class 6 (ISO 492:2023)Not recordedTVP — Solid cage made of glass-fiber reinforced polyamid PA66Not recordedGA13 — Ball bearing and insert bearing grease
FAG 7308-B-XL-2RS-TVP-L1002RS — Contact seal on both sidesP6 — Class 6 (ISO 492:2023)Not recordedTVP — Solid cage made of glass-fiber reinforced polyamid PA66Not recordedL100 — Grease (L100/customer specific)
FAG 7308-B-XL-2RS-TVP-L1382RS — Contact seal on both sidesP6 — Class 6 (ISO 492:2023)Not recordedTVP — Solid cage made of glass-fiber reinforced polyamid PA66Not recordedL138 — Grease (L138/customer specific)
FAG 7308-B-XL-2RS-TVP-L1982RS — Contact seal on both sidesP6 — Class 6 (ISO 492:2023)Not recordedTVP — Solid cage made of glass-fiber reinforced polyamid PA66Not recordedL198 — Grease (L198/customer specific)
FAG 7308-B-XL-2RS-TVP-L2372RS — Contact seal on both sidesP6 — Class 6 (ISO 492:2023)Not recordedTVP — Solid cage made of glass-fiber reinforced polyamid PA66Not recordedL237 — Grease (L237/customer specific)
FAG 7308-B-XL-JPWithout — Not sealedP6 — Class 6 (ISO 492:2023)Not recordedJP — Steel sheet metalNot recordedWithout — Bearing not greased
FAG 7308-B-XL-JP-UAWithout — Not sealedP6 — Class 6 (ISO 492:2023)Not recordedJP — Steel sheet metalNot recordedWithout — Bearing not greased
FAG 7308-B-XL-JP-UOWithout — Not sealedP6 — Class 6 (ISO 492:2023)Not recordedJP — Steel sheet metalNot recordedWithout — Bearing not greased
FAG 7308-B-XL-MPWithout — Not sealedP6 — Class 6 (ISO 492:2023)Not recordedMP — Solid brass cage, ball guidedNot recordedWithout — Bearing not greased
FAG 7308-B-XL-MPA-P5-ULWithout — Not sealedP5 — Class 5 (ISO 492:2023)Not recordedMPA — Solid brass cage, outer ring guidedNot recordedWithout — Bearing not greased
FAG 7308-B-XL-MP-P5-ULWithout — Not sealedP5 — Class 5 (ISO 492:2023)Not recordedMP — Solid brass cage, ball guidedNot recordedWithout — Bearing not greased
FAG 7308-B-XL-MP-UAWithout — Not sealedP6 — Class 6 (ISO 492:2023)Not recordedMP — Solid brass cage, ball guidedNot recordedWithout — Bearing not greased
FAG 7308-B-XL-MP-UBWithout — Not sealedP6 — Class 6 (ISO 492:2023)Not recordedMP — Solid brass cage, ball guidedNot recordedWithout — Bearing not greased
FAG 7308-B-XL-MP-UOWithout — Not sealedP6 — Class 6 (ISO 492:2023)Not recordedMP — Solid brass cage, ball guidedNot recordedWithout — Bearing not greased
FAG 7308-B-XL-TVPWithout — Not sealedP6 — Class 6 (ISO 492:2023)Not recordedTVP — Solid cage made of glass-fiber reinforced polyamid PA66Not recordedWithout — Bearing not greased
FAG 7308-B-XL-TVP-P5-ULWithout — Not sealedP5 — Class 5 (ISO 492:2023)Not recordedTVP — Solid cage made of glass-fiber reinforced polyamid PA66Not recordedWithout — Bearing not greased
FAG 7308-B-XL-TVP-UAWithout — Not sealedP6 — Class 6 (ISO 492:2023)Not recordedTVP — Solid cage made of glass-fiber reinforced polyamid PA66Not recordedWithout — Bearing not greased
FAG 7308-B-XL-TVP-UBWithout — Not sealedP6 — Class 6 (ISO 492:2023)Not recordedTVP — Solid cage made of glass-fiber reinforced polyamid PA66Not recordedWithout — Bearing not greased
FAG 7308-B-XL-TVP-UOWithout — Not sealedP6 — Class 6 (ISO 492:2023)Not recordedTVP — Solid cage made of glass-fiber reinforced polyamid PA66Not recordedWithout — Bearing not greased
TIMKEN 7308WNOpenNot recordedNot recordedBrass cageNot recordedNot recorded
TIMKEN 7308WNMBRSUOpenNot recordedNot recordedBrass cageNot recordedNot recorded
TIMKEN 7308WNSUOpenNot recordedNot recordedBrass cageNot recordedNot recorded
NSK 7308AWNot recordedNot recordedNot recordedPressed steelNot recordedNot recorded
NSK 7308AWDBNot recordedNot recordedNot recordedPressed steelNot recordedNot recorded
NSK 7308AWDFNot recordedNot recordedNot recordedPressed steelNot recordedNot recorded
NSK 7308AWDTNot recordedNot recordedNot recordedPressed steelNot recordedNot recorded
NSK 7308BEAT85Not recordedNot recordedNot recordedPolyamide 46 resinNot recordedNot recorded
NSK 7308BEAWNot recordedNot recordedNot recordedPressed steelNot recordedNot recorded
NSK 7308BEAWDBNot recordedNot recordedNot recordedPressed steelNot recordedNot recorded
NSK 7308BEAWDFNot recordedNot recordedNot recordedPressed steelNot recordedNot recorded
NSK 7308BEAWDTNot recordedNot recordedNot recordedPressed steelNot recordedNot recorded
KOYO 7308BNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 7308BDBNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 7308BDB FYNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 7308BDFNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 7308BDF FYNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 7308BDTNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 7308BDT FYNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 7308B FYNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 7308CNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 7308CDBNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 7308CDB FYNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 7308CDFNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 7308CDF FYNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 7308CDTNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 7308CDT FYNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 7308C FYNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 7308DBNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 7308DB FYNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 7308DFNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 7308DF FYNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 7308DTNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 7308DT FYNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 7308 FYNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded

How to compare these values

  • Use the displayed dimension names and original symbols. Housing length L, height H2 and flange width are not bearing outside diameter D. A catalogue width with an unverified symbol must not be assumed to be inner-ring width B or assembly width T. Open the product record for mounting dimensions and geometry.
  • Inch values are calculated from the recorded millimetres using 25.4 mm per inch, rounded to six decimal places. They do not change a metric bearing into an inch-series bearing. Gram values are converted from the recorded mass in kilograms.
  • C and C0 describe different rating conditions. They are not a single safe working-load limit and cannot replace an application load calculation.
  • Reference and limiting speeds are separate catalogue values. The source grease/oil context is shown where recorded. Lubricant, seals, loads, fit, clearance and cooling affect the usable operating speed.
  • A common base number does not prove equivalent seals, clearance, precision, material or interchangeability. Open the full designation for these fields.
Check load calculations →Estimate rating life →Decode the complete marking →Check replacement evidence →

Related prefix matches — other model numbers may appear

These discovery results can contain a longer number or a different component. They are not specifications for the requested exact model. Open the complete product to inspect its original geometry.

KOYO

7308

Angular contact ball bearing

View full technical record →SKF

7308 ACCBM

Single row angular contact ball bearing with 25° contact angle

View full technical record →NSK

7308AW

Angular contact ball bearing

View full technical record →NSK

7308AWDB

Angular contact ball bearing

View full technical record →NSK

7308AWDF

Angular contact ball bearing

View full technical record →NSK

7308AWDT

Angular contact ball bearing

View full technical record →KOYO

7308B

Angular contact ball bearing

View full technical record →KOYO

7308BDB

Angular contact ball bearing

View full technical record →KOYO

7308BDB FY

Angular contact ball bearing

View full technical record →KOYO

7308BDF

Angular contact ball bearing

View full technical record →KOYO

7308BDF FY

Angular contact ball bearing

View full technical record →KOYO

7308BDT

Angular contact ball bearing

View full technical record →
Filter all 71 prefix results →

Check the drawing before substituting

Nominal dimensions are not shaft-fit tolerances. Different variants can add grooves, flanges, wider rings or assembly components. When the table has different dimensions, the complete designation—not the shared prefix—controls.

Measurement guide →Cross-reference checks →

Reference basis & data limits

Manufacturer terminology is retained in the product records. Technical reference basis: JTEKT Basic Bearing Knowledge (boundary dimensions, tolerance classes and lubrication); NSK Bearing ABCs (lubrication, designations and clearance); NTN technical FAQs (closure codes and component interchange); SKF rolling-bearing selection and maintenance references.

Selection workflows and catalogue grouping are BearingScope editorial aids. Verify the current drawing and application requirements before using a candidate. Missing database information is not converted into an assumed match.

Search the consolidated catalogue

Find, filter and compare bearing model data in one place.

Open model search