99,016 bearing records · search, filter and compare

info@bearingscope.com
Find · understand · compare

7307 bearing dimensions & suffix variants

Look up recorded dimensions for designations beginning with 7307. The table retains complete manufacturer designations so special suffixes and different dimensional variants remain visible.

On this page5 sections

Find by measured dimensions

Enter bore d, outside diameter D and width B. Use decimals or inch fractions such as 1/2 or 1 1/4.

For tapered assemblies use total width T; for units or flanged bearings also check the mounting drawing.

Exact model evidence

7307 dimensions and recorded technical data

The recorded 7307 base designation measures 35×80×21 mm (inside diameter d × outside diameter D × width B). This answer uses unsuffixed records from KOYO. It does not assign the same dimensions or operating ratings to every suffix.

The numeric series boundary is preserved: a longer number is not included merely because its first digits match. 62 recorded variants are listed. A dash means the value is missing, not zero.

Brand / full designationNamed dimensions (mm / in)Dynamic C (kN)Static C0 (kN)Reference speed (rpm)Limiting speed (rpm)Mass (kg / g)
KOYO7307Angular contact ball bearing
Bore diameter (d)
35 mm
1.377953 in
Outside diameter (D)
80 mm
3.149606 in
Width (B)
21 mm
0.826772 in
49.9 kN26.4 kN—8000 rpmLimiting Speeds(Grease Lub.): 8000 min-1Limiting Speeds(Oil Lub.): 10000 min-10.475 kg475 g
SKF7307 ACCBMSingle row angular contact ball bearing with 25° contact angle
Bore diameter (d)
35 mm
1.377953 in
Outside diameter (D)
80 mm
3.149606 in
Width (B)
21 mm
0.826772 in
46.5 kN30 kN11000 rpm17000 rpm0.485 kg485 g
SKF7307 BE-2RZPSingle row angular contact ball bearing with 40° contact angle and non-contact seals on both sides
Bore diameter (d)
35 mm
1.377953 in
Outside diameter (D)
80 mm
3.149606 in
Width (B)
21 mm
0.826772 in
39 kN24.5 kN11000 rpm8500 rpm0.449 kg449 g
SKF7307 BECBMSingle row angular contact ball bearing
Bore diameter (d)
35 mm
1.377953 in
Outside diameter (D)
80 mm
3.149606 in
Width (B)
21 mm
0.826772 in
41.5 kN26.5 kN11000 rpm15000 rpm0.485 kg485 g
SKF7307 BECBPSingle row angular contact ball bearing
Bore diameter (d)
35 mm
1.377953 in
Outside diameter (D)
80 mm
3.149606 in
Width (B)
21 mm
0.826772 in
41.5 kN26.5 kN11000 rpm11000 rpm0.444 kg444 g
SKF7307 BECBYSingle row angular contact ball bearing
Bore diameter (d)
35 mm
1.377953 in
Outside diameter (D)
80 mm
3.149606 in
Width (B)
21 mm
0.826772 in
41.5 kN26.5 kN11000 rpm11000 rpm0.468 kg468 g
SKF7307 BEGAMSingle row angular contact ball bearing
Bore diameter (d)
35 mm
1.377953 in
Outside diameter (D)
80 mm
3.149606 in
Width (B)
21 mm
0.826772 in
41.5 kN26.5 kN11000 rpm15000 rpm0.485 kg485 g
SKF7307 BEGAPSingle row angular contact ball bearing
Bore diameter (d)
35 mm
1.377953 in
Outside diameter (D)
80 mm
3.149606 in
Width (B)
21 mm
0.826772 in
41.5 kN26.5 kN11000 rpm11000 rpm0.444 kg444 g
SKF7307 BEGAPHSingle row angular contact ball bearing
Bore diameter (d)
35 mm
1.377953 in
Outside diameter (D)
80 mm
3.149606 in
Width (B)
21 mm
0.826772 in
41.5 kN26.5 kN11000 rpm11000 rpm0.444 kg444 g
SKF7307 BEGBPSingle row angular contact ball bearing
Bore diameter (d)
35 mm
1.377953 in
Outside diameter (D)
80 mm
3.149606 in
Width (B)
21 mm
0.826772 in
41.5 kN26.5 kN11000 rpm11000 rpm0.444 kg444 g
SKF7307 BEPSingle row angular contact ball bearing
Bore diameter (d)
35 mm
1.377953 in
Outside diameter (D)
80 mm
3.149606 in
Width (B)
21 mm
0.826772 in
39 kN24.5 kN11000 rpm10000 rpm0.444 kg444 g
FAG7307-B-XL-2RS-TVPAngular contact ball bearing
Bore diameter (d)
35 mm
1.377953 in
Outside diameter (D)
80 mm
3.149606 in
Width (B)
21 mm
0.826772 in
45.5 kN27.5 kN—5300 rpm0.474 kg474 g
FAG7307-B-XL-JPAngular contact ball bearing
Bore diameter (d)
35 mm
1.377953 in
Outside diameter (D)
80 mm
3.149606 in
Width (B)
21 mm
0.826772 in
45.5 kN27.5 kN7900 rpm11900 rpm0.46 kg460 g
FAG7307-B-XL-JP-UAAngular contact ball bearing
Bore diameter (d)
35 mm
1.377953 in
Outside diameter (D)
80 mm
3.149606 in
Width (B)
21 mm
0.826772 in
45.5 kN27.5 kN7900 rpm11900 rpm0.46 kg460 g
FAG7307-B-XL-JP-UBAngular contact ball bearing
Bore diameter (d)
35 mm
1.377953 in
Outside diameter (D)
80 mm
3.149606 in
Width (B)
21 mm
0.826772 in
45.5 kN27.5 kN7900 rpm11900 rpm0.047 kg47 g
FAG7307-B-XL-JP-UOAngular contact ball bearing
Bore diameter (d)
35 mm
1.377953 in
Outside diameter (D)
80 mm
3.149606 in
Width (B)
21 mm
0.826772 in
45.5 kN27.5 kN7900 rpm11900 rpm0.469 kg469 g
FAG7307-B-XL-MPAngular contact ball bearing
Bore diameter (d)
35 mm
1.377953 in
Outside diameter (D)
80 mm
3.149606 in
Width (B)
21 mm
0.826772 in
45.5 kN27.5 kN7900 rpm15500 rpm0.498 kg498 g
FAG7307-B-XL-MP-P6-UAAngular contact ball bearing
Bore diameter (d)
35 mm
1.377953 in
Outside diameter (D)
80 mm
3.149606 in
Width (B)
21 mm
0.826772 in
45.5 kN27.5 kN7900 rpm15500 rpm0.498 kg498 g
FAG7307-B-XL-MP-UAAngular contact ball bearing
Bore diameter (d)
35 mm
1.377953 in
Outside diameter (D)
80 mm
3.149606 in
Width (B)
21 mm
0.826772 in
45.5 kN27.5 kN7900 rpm15500 rpm0.498 kg498 g
FAG7307-B-XL-MP-UBAngular contact ball bearing
Bore diameter (d)
35 mm
1.377953 in
Outside diameter (D)
80 mm
3.149606 in
Width (B)
21 mm
0.826772 in
45.5 kN27.5 kN7900 rpm15500 rpm0.498 kg498 g
FAG7307-B-XL-MP-UOAngular contact ball bearing
Bore diameter (d)
35 mm
1.377953 in
Outside diameter (D)
80 mm
3.149606 in
Width (B)
21 mm
0.826772 in
45.5 kN27.5 kN7900 rpm15500 rpm0.498 kg498 g
FAG7307-B-XL-TVPAngular contact ball bearing
Bore diameter (d)
35 mm
1.377953 in
Outside diameter (D)
80 mm
3.149606 in
Width (B)
21 mm
0.826772 in
45.5 kN27.5 kN7900 rpm11900 rpm0.466 kg466 g
FAG7307-B-XL-TVP-P5Angular contact ball bearing
Bore diameter (d)
35 mm
1.377953 in
Outside diameter (D)
80 mm
3.149606 in
Width (B)
21 mm
0.826772 in
45.5 kN27.5 kN7900 rpm11900 rpm0.446 kg446 g
FAG7307-B-XL-TVP-P5-ULAngular contact ball bearing
Bore diameter (d)
35 mm
1.377953 in
Outside diameter (D)
80 mm
3.149606 in
Width (B)
21 mm
0.826772 in
45.5 kN27.5 kN7900 rpm11900 rpm0.446 kg446 g
FAG7307-B-XL-TVP-UAAngular contact ball bearing
Bore diameter (d)
35 mm
1.377953 in
Outside diameter (D)
80 mm
3.149606 in
Width (B)
21 mm
0.826772 in
45.5 kN27.5 kN7900 rpm11900 rpm0.446 kg446 g
FAG7307-B-XL-TVP-UBAngular contact ball bearing
Bore diameter (d)
35 mm
1.377953 in
Outside diameter (D)
80 mm
3.149606 in
Width (B)
21 mm
0.826772 in
45.5 kN27.5 kN7900 rpm11900 rpm0.453 kg453 g
FAG7307-B-XL-TVP-ULAngular contact ball bearing
Bore diameter (d)
35 mm
1.377953 in
Outside diameter (D)
80 mm
3.149606 in
Width (B)
21 mm
0.826772 in
45.5 kN27.5 kN7900 rpm11900 rpm0.446 kg446 g
FAG7307-B-XL-TVP-UOAngular contact ball bearing
Bore diameter (d)
35 mm
1.377953 in
Outside diameter (D)
80 mm
3.149606 in
Width (B)
21 mm
0.826772 in
45.5 kN27.5 kN7900 rpm11900 rpm0.446 kg446 g
TIMKEN7307WNAngular contact ball bearing
Recorded bore (d)
35 mm
1.377953 in
Recorded outside dimension (D)
80 mm
3.149606 in
Catalogue width (symbol unverified)
21 mm
0.826772 in
36.7 kN24.1 kN——0.41 kg410 g
TIMKEN7307WNSUAngular contact ball bearing
Recorded bore (d)
35 mm
1.377953 in
Recorded outside dimension (D)
80 mm
3.149606 in
Catalogue width (symbol unverified)
21 mm
0.826772 in
36.7 kN24.1 kN——0.41 kg410 g
NSK7307AWAngular contact ball bearing
Bore diameter (d)
35 mm
1.377953 in
Outside diameter (D)
80 mm
3.149606 in
Individual bearing width (B)
21 mm
0.826772 in
44 kN26.3 kN——0.464 kg464 g
NSK7307AWDBAngular contact ball bearing
Bore diameter (d)
35 mm
1.377953 in
Outside diameter (D)
80 mm
3.149606 in
Catalogue width (symbol unverified)
42 mm
1.653543 in
71.5 kN52.5 kN———
NSK7307AWDFAngular contact ball bearing
Bore diameter (d)
35 mm
1.377953 in
Outside diameter (D)
80 mm
3.149606 in
Catalogue width (symbol unverified)
42 mm
1.653543 in
71.5 kN52.5 kN———
NSK7307AWDTAngular contact ball bearing
Bore diameter (d)
35 mm
1.377953 in
Outside diameter (D)
80 mm
3.149606 in
Catalogue width (symbol unverified)
42 mm
1.653543 in
71.5 kN52.5 kN———
NSK7307BEAT85Angular contact ball bearing
Bore diameter (d)
35 mm
1.377953 in
Outside diameter (D)
80 mm
3.149606 in
Individual bearing width (B)
21 mm
0.826772 in
42 kN24.4 kN——0.451 kg451 g
NSK7307BEAWAngular contact ball bearing
Bore diameter (d)
35 mm
1.377953 in
Outside diameter (D)
80 mm
3.149606 in
Individual bearing width (B)
21 mm
0.826772 in
42 kN24.4 kN——0.469 kg469 g
NSK7307BEAWDBAngular contact ball bearing
Bore diameter (d)
35 mm
1.377953 in
Outside diameter (D)
80 mm
3.149606 in
Catalogue width (symbol unverified)
42 mm
1.653543 in
68.5 kN49 kN———
NSK7307BEAWDFAngular contact ball bearing
Bore diameter (d)
35 mm
1.377953 in
Outside diameter (D)
80 mm
3.149606 in
Catalogue width (symbol unverified)
42 mm
1.653543 in
68.5 kN49 kN———
NSK7307BEAWDTAngular contact ball bearing
Bore diameter (d)
35 mm
1.377953 in
Outside diameter (D)
80 mm
3.149606 in
Catalogue width (symbol unverified)
42 mm
1.653543 in
68.5 kN49 kN———
KOYO7307BAngular contact ball bearing
Bore diameter (d)
35 mm
1.377953 in
Outside diameter (D)
80 mm
3.149606 in
Width (B)
21 mm
0.826772 in
45.8 kN24.3 kN—6100 rpmLimiting Speeds(Grease Lub.): 6100 min-1Limiting Speeds(Oil Lub.): 8000 min-10.475 kg475 g
KOYO7307BDBAngular contact ball bearing
Bore diameter (d)
35 mm
1.377953 in
Outside diameter (D)
80 mm
3.149606 in
Width (B)
42 mm
1.653543 in
74.4 kN48.6 kN—4900 rpmLimiting Speeds(Grease Lub.): 4900 min-1Limiting Speeds(Oil Lub.): 6500 min-10.95 kg950 g
KOYO7307BDB FYAngular contact ball bearing
Bore diameter (d)
35 mm
1.377953 in
Outside diameter (D)
80 mm
3.149606 in
Width (B)
42 mm
1.653543 in
65.9 kN40.5 kN—6200 rpmLimiting Speeds(Grease Lub.): 6200 min-1Limiting Speeds(Oil Lub.): 8200 min-10.95 kg950 g
KOYO7307BDFAngular contact ball bearing
Bore diameter (d)
35 mm
1.377953 in
Outside diameter (D)
80 mm
3.149606 in
Width (B)
42 mm
1.653543 in
74.4 kN48.6 kN—4900 rpmLimiting Speeds(Grease Lub.): 4900 min-1Limiting Speeds(Oil Lub.): 6500 min-10.95 kg950 g
KOYO7307BDF FYAngular contact ball bearing
Bore diameter (d)
35 mm
1.377953 in
Outside diameter (D)
80 mm
3.149606 in
Width (B)
42 mm
1.653543 in
65.9 kN40.5 kN—6200 rpmLimiting Speeds(Grease Lub.): 6200 min-1Limiting Speeds(Oil Lub.): 8200 min-10.95 kg950 g
KOYO7307BDTAngular contact ball bearing
Bore diameter (d)
35 mm
1.377953 in
Outside diameter (D)
80 mm
3.149606 in
Width (B)
42 mm
1.653543 in
74.4 kN48.6 kN—4900 rpmLimiting Speeds(Grease Lub.): 4900 min-1Limiting Speeds(Oil Lub.): 6500 min-10.95 kg950 g
KOYO7307BDT FYAngular contact ball bearing
Bore diameter (d)
35 mm
1.377953 in
Outside diameter (D)
80 mm
3.149606 in
Width (B)
42 mm
1.653543 in
65.9 kN40.5 kN—6200 rpmLimiting Speeds(Grease Lub.): 6200 min-1Limiting Speeds(Oil Lub.): 8200 min-10.95 kg950 g
KOYO7307B FYAngular contact ball bearing
Bore diameter (d)
35 mm
1.377953 in
Outside diameter (D)
80 mm
3.149606 in
Width (B)
21 mm
0.826772 in
40.6 kN20.2 kN—7700 rpmLimiting Speeds(Grease Lub.): 7700 min-1Limiting Speeds(Oil Lub.): 10000 min-10.475 kg475 g
KOYO7307CAngular contact ball bearing
Bore diameter (d)
35 mm
1.377953 in
Outside diameter (D)
80 mm
3.149606 in
Width (B)
21 mm
0.826772 in
53.5 kN28.3 kN—11000 rpmLimiting Speeds(Grease Lub.): 11000 min-1Limiting Speeds(Oil Lub.): 15000 min-10.475 kg475 g
KOYO7307CDBAngular contact ball bearing
Bore diameter (d)
35 mm
1.377953 in
Outside diameter (D)
80 mm
3.149606 in
Width (B)
42 mm
1.653543 in
86.9 kN56.6 kN—8800 rpmLimiting Speeds(Grease Lub.): 8800 min-1Limiting Speeds(Oil Lub.): 12000 min-10.95 kg950 g
KOYO7307CDB FYAngular contact ball bearing
Bore diameter (d)
35 mm
1.377953 in
Outside diameter (D)
80 mm
3.149606 in
Width (B)
42 mm
1.653543 in
77 kN47.2 kN—11000 rpmLimiting Speeds(Grease Lub.): 11000 min-1Limiting Speeds(Oil Lub.): 15000 min-10.95 kg950 g
KOYO7307CDFAngular contact ball bearing
Bore diameter (d)
35 mm
1.377953 in
Outside diameter (D)
80 mm
3.149606 in
Width (B)
42 mm
1.653543 in
86.9 kN56.6 kN—8800 rpmLimiting Speeds(Grease Lub.): 8800 min-1Limiting Speeds(Oil Lub.): 12000 min-10.95 kg950 g
KOYO7307CDF FYAngular contact ball bearing
Bore diameter (d)
35 mm
1.377953 in
Outside diameter (D)
80 mm
3.149606 in
Width (B)
42 mm
1.653543 in
77 kN47.2 kN—11000 rpmLimiting Speeds(Grease Lub.): 11000 min-1Limiting Speeds(Oil Lub.): 15000 min-10.95 kg950 g
KOYO7307CDTAngular contact ball bearing
Bore diameter (d)
35 mm
1.377953 in
Outside diameter (D)
80 mm
3.149606 in
Width (B)
42 mm
1.653543 in
86.9 kN56.6 kN—8800 rpmLimiting Speeds(Grease Lub.): 8800 min-1Limiting Speeds(Oil Lub.): 12000 min-10.95 kg950 g
KOYO7307CDT FYAngular contact ball bearing
Bore diameter (d)
35 mm
1.377953 in
Outside diameter (D)
80 mm
3.149606 in
Width (B)
42 mm
1.653543 in
77 kN47.2 kN—11000 rpmLimiting Speeds(Grease Lub.): 11000 min-1Limiting Speeds(Oil Lub.): 15000 min-10.95 kg950 g
KOYO7307C FYAngular contact ball bearing
Bore diameter (d)
35 mm
1.377953 in
Outside diameter (D)
80 mm
3.149606 in
Width (B)
21 mm
0.826772 in
47.4 kN23.6 kN—14000 rpmLimiting Speeds(Grease Lub.): 14000 min-1Limiting Speeds(Oil Lub.): 19000 min-10.475 kg475 g
KOYO7307DBAngular contact ball bearing
Bore diameter (d)
35 mm
1.377953 in
Outside diameter (D)
80 mm
3.149606 in
Width (B)
42 mm
1.653543 in
81.1 kN52.8 kN—6500 rpmLimiting Speeds(Grease Lub.): 6500 min-1Limiting Speeds(Oil Lub.): 8000 min-10.95 kg950 g
KOYO7307DB FYAngular contact ball bearing
Bore diameter (d)
35 mm
1.377953 in
Outside diameter (D)
80 mm
3.149606 in
Width (B)
42 mm
1.653543 in
71.8 kN44 kN—8200 rpmLimiting Speeds(Grease Lub.): 8200 min-1Limiting Speeds(Oil Lub.): 10000 min-10.95 kg950 g
KOYO7307DFAngular contact ball bearing
Bore diameter (d)
35 mm
1.377953 in
Outside diameter (D)
80 mm
3.149606 in
Width (B)
42 mm
1.653543 in
81.1 kN52.8 kN—6500 rpmLimiting Speeds(Grease Lub.): 6500 min-1Limiting Speeds(Oil Lub.): 8000 min-10.95 kg950 g
KOYO7307DF FYAngular contact ball bearing
Bore diameter (d)
35 mm
1.377953 in
Outside diameter (D)
80 mm
3.149606 in
Width (B)
42 mm
1.653543 in
71.8 kN44 kN—8200 rpmLimiting Speeds(Grease Lub.): 8200 min-1Limiting Speeds(Oil Lub.): 10000 min-10.95 kg950 g
KOYO7307DTAngular contact ball bearing
Bore diameter (d)
35 mm
1.377953 in
Outside diameter (D)
80 mm
3.149606 in
Width (B)
42 mm
1.653543 in
81.1 kN52.8 kN—6500 rpmLimiting Speeds(Grease Lub.): 6500 min-1Limiting Speeds(Oil Lub.): 8000 min-10.95 kg950 g
KOYO7307DT FYAngular contact ball bearing
Bore diameter (d)
35 mm
1.377953 in
Outside diameter (D)
80 mm
3.149606 in
Width (B)
42 mm
1.653543 in
71.8 kN44 kN—8200 rpmLimiting Speeds(Grease Lub.): 8200 min-1Limiting Speeds(Oil Lub.): 10000 min-10.95 kg950 g
KOYO7307 FYAngular contact ball bearing
Bore diameter (d)
35 mm
1.377953 in
Outside diameter (D)
80 mm
3.149606 in
Width (B)
21 mm
0.826772 in
44.2 kN22 kN—10000 rpmLimiting Speeds(Grease Lub.): 10000 min-1Limiting Speeds(Oil Lub.): 13000 min-10.475 kg475 g
Compare recorded seals, clearance, precision and materials

Manufacturer wording is retained. A missing property is not inferred from another brand or a similar suffix.

Brand / designationClosureOriginal precisionClearanceCageMaterialLubricant
KOYO 7307Not recordedNot recordedNot recordedNot recordedNot recordedNot recorded
SKF 7307 ACCBMWithoutP6Not recordedMachined brassBearing steelNone
SKF 7307 BE-2RZPSeal on both sidesNormalNot recordedNon-metallicBearing steelGrease
SKF 7307 BECBMWithoutP6Not recordedMachined brassBearing steelNone
SKF 7307 BECBPWithoutP6Not recordedNon-metallicBearing steelNone
SKF 7307 BECBYWithoutP6Not recordedBrass sheet metalBearing steelNone
SKF 7307 BEGAMWithoutP6Not recordedMachined brassBearing steelNone
SKF 7307 BEGAPWithoutP6Not recordedNon-metallicBearing steelNone
SKF 7307 BEGAPHWithoutP6Not recordedNon-metallicBearing steelNone
SKF 7307 BEGBPWithoutP6Not recordedNon-metallicBearing steelNone
SKF 7307 BEPWithoutNormalNot recordedNon-metallicBearing steelNone
FAG 7307-B-XL-2RS-TVP2RS — Contact seal on both sidesP6 — Class 6 (ISO 492:2023)Not recordedTVP — Solid cage made of glass-fiber reinforced polyamid PA66Not recordedGA13 — Ball bearing and insert bearing grease
FAG 7307-B-XL-JPWithout — Not sealedP6 — Class 6 (ISO 492:2023)Not recordedJP — Steel sheet metalNot recordedWithout — Bearing not greased
FAG 7307-B-XL-JP-UAWithout — Not sealedP6 — Class 6 (ISO 492:2023)Not recordedJP — Steel sheet metalNot recordedWithout — Bearing not greased
FAG 7307-B-XL-JP-UBWithout — Not sealedP6 — Class 6 (ISO 492:2023)Not recordedJP — Steel sheet metalNot recordedWithout — Bearing not greased
FAG 7307-B-XL-JP-UOWithout — Not sealedP6 — Class 6 (ISO 492:2023)Not recordedJP — Steel sheet metalNot recordedWithout — Bearing not greased
FAG 7307-B-XL-MPWithout — Not sealedP6 — Class 6 (ISO 492:2023)Not recordedMP — Solid brass cage, ball guidedNot recordedWithout — Bearing not greased
FAG 7307-B-XL-MP-P6-UAWithout — Not sealedP6 — Class 6 (ISO 492:2023)Not recordedMP — Solid brass cage, ball guidedNot recordedWithout — Bearing not greased
FAG 7307-B-XL-MP-UAWithout — Not sealedP6 — Class 6 (ISO 492:2023)Not recordedMP — Solid brass cage, ball guidedNot recordedWithout — Bearing not greased
FAG 7307-B-XL-MP-UBWithout — Not sealedP6 — Class 6 (ISO 492:2023)Not recordedMP — Solid brass cage, ball guidedNot recordedWithout — Bearing not greased
FAG 7307-B-XL-MP-UOWithout — Not sealedP6 — Class 6 (ISO 492:2023)Not recordedMP — Solid brass cage, ball guidedNot recordedWithout — Bearing not greased
FAG 7307-B-XL-TVPWithout — Not sealedP6 — Class 6 (ISO 492:2023)Not recordedTVP — Solid cage made of glass-fiber reinforced polyamid PA66Not recordedWithout — Bearing not greased
FAG 7307-B-XL-TVP-P5Without — Not sealedP5 — Class 5 (ISO 492:2023)Not recordedTVP — Solid cage made of glass-fiber reinforced polyamid PA66Not recordedWithout — Bearing not greased
FAG 7307-B-XL-TVP-P5-ULWithout — Not sealedP5 — Class 5 (ISO 492:2023)Not recordedTVP — Solid cage made of glass-fiber reinforced polyamid PA66Not recordedWithout — Bearing not greased
FAG 7307-B-XL-TVP-UAWithout — Not sealedP6 — Class 6 (ISO 492:2023)Not recordedTVP — Solid cage made of glass-fiber reinforced polyamid PA66Not recordedWithout — Bearing not greased
FAG 7307-B-XL-TVP-UBWithout — Not sealedP6 — Class 6 (ISO 492:2023)Not recordedTVP — Solid cage made of glass-fiber reinforced polyamid PA66Not recordedWithout — Bearing not greased
FAG 7307-B-XL-TVP-ULWithout — Not sealedP6 — Class 6 (ISO 492:2023)Not recordedTVP — Solid cage made of glass-fiber reinforced polyamid PA66Not recordedWithout — Bearing not greased
FAG 7307-B-XL-TVP-UOWithout — Not sealedP6 — Class 6 (ISO 492:2023)Not recordedTVP — Solid cage made of glass-fiber reinforced polyamid PA66Not recordedWithout — Bearing not greased
TIMKEN 7307WNOpenNot recordedNot recordedBrass cageNot recordedNot recorded
TIMKEN 7307WNSUOpenNot recordedNot recordedBrass cageNot recordedNot recorded
NSK 7307AWNot recordedNot recordedNot recordedPressed steelNot recordedNot recorded
NSK 7307AWDBNot recordedNot recordedNot recordedPressed steelNot recordedNot recorded
NSK 7307AWDFNot recordedNot recordedNot recordedPressed steelNot recordedNot recorded
NSK 7307AWDTNot recordedNot recordedNot recordedPressed steelNot recordedNot recorded
NSK 7307BEAT85Not recordedNot recordedNot recordedPolyamide 46 resinNot recordedNot recorded
NSK 7307BEAWNot recordedNot recordedNot recordedPressed steelNot recordedNot recorded
NSK 7307BEAWDBNot recordedNot recordedNot recordedPressed steelNot recordedNot recorded
NSK 7307BEAWDFNot recordedNot recordedNot recordedPressed steelNot recordedNot recorded
NSK 7307BEAWDTNot recordedNot recordedNot recordedPressed steelNot recordedNot recorded
KOYO 7307BNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 7307BDBNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 7307BDB FYNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 7307BDFNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 7307BDF FYNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 7307BDTNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 7307BDT FYNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 7307B FYNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 7307CNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 7307CDBNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 7307CDB FYNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 7307CDFNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 7307CDF FYNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 7307CDTNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 7307CDT FYNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 7307C FYNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 7307DBNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 7307DB FYNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 7307DFNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 7307DF FYNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 7307DTNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 7307DT FYNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 7307 FYNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded

How to compare these values

  • Use the displayed dimension names and original symbols. Housing length L, height H2 and flange width are not bearing outside diameter D. A catalogue width with an unverified symbol must not be assumed to be inner-ring width B or assembly width T. Open the product record for mounting dimensions and geometry.
  • Inch values are calculated from the recorded millimetres using 25.4 mm per inch, rounded to six decimal places. They do not change a metric bearing into an inch-series bearing. Gram values are converted from the recorded mass in kilograms.
  • C and C0 describe different rating conditions. They are not a single safe working-load limit and cannot replace an application load calculation.
  • Reference and limiting speeds are separate catalogue values. The source grease/oil context is shown where recorded. Lubricant, seals, loads, fit, clearance and cooling affect the usable operating speed.
  • A common base number does not prove equivalent seals, clearance, precision, material or interchangeability. Open the full designation for these fields.
Check load calculations →Estimate rating life →Decode the complete marking →Check replacement evidence →

Related prefix matches — other model numbers may appear

These discovery results can contain a longer number or a different component. They are not specifications for the requested exact model. Open the complete product to inspect its original geometry.

KOYO

7307

Angular contact ball bearing

View full technical record →SKF

7307 ACCBM

Single row angular contact ball bearing with 25° contact angle

View full technical record →NSK

7307AW

Angular contact ball bearing

View full technical record →NSK

7307AWDB

Angular contact ball bearing

View full technical record →NSK

7307AWDF

Angular contact ball bearing

View full technical record →NSK

7307AWDT

Angular contact ball bearing

View full technical record →KOYO

7307B

Angular contact ball bearing

View full technical record →KOYO

7307BDB

Angular contact ball bearing

View full technical record →KOYO

7307BDB FY

Angular contact ball bearing

View full technical record →KOYO

7307BDF

Angular contact ball bearing

View full technical record →KOYO

7307BDF FY

Angular contact ball bearing

View full technical record →KOYO

7307BDT

Angular contact ball bearing

View full technical record →
Filter all 62 prefix results →

Check the drawing before substituting

Nominal dimensions are not shaft-fit tolerances. Different variants can add grooves, flanges, wider rings or assembly components. When the table has different dimensions, the complete designation—not the shared prefix—controls.

Measurement guide →Cross-reference checks →

Reference basis & data limits

Manufacturer terminology is retained in the product records. Technical reference basis: JTEKT Basic Bearing Knowledge (boundary dimensions, tolerance classes and lubrication); NSK Bearing ABCs (lubrication, designations and clearance); NTN technical FAQs (closure codes and component interchange); SKF rolling-bearing selection and maintenance references.

Selection workflows and catalogue grouping are BearingScope editorial aids. Verify the current drawing and application requirements before using a candidate. Missing database information is not converted into an assumed match.

Search the consolidated catalogue

Find, filter and compare bearing model data in one place.

Open model search