Find · understand · compare
7305 bearing dimensions & suffix variants
Look up recorded dimensions for designations beginning with 7305. The table retains complete manufacturer designations so special suffixes and different dimensional variants remain visible.
On this page5 sections ⌄
Find by measured dimensions
Enter bore d, outside diameter D and width B. Use decimals or inch fractions such as 1/2 or 1 1/4.
7305 dimensions and recorded technical data
The recorded 7305 base designation measures 25×62×17 mm (inside diameter d × outside diameter D × width B). This answer uses unsuffixed records from KOYO. It does not assign the same dimensions or operating ratings to every suffix.
The numeric series boundary is preserved: a longer number is not included merely because its first digits match. 56 recorded variants are listed. A dash means the value is missing, not zero.
No recorded variant matches these filters. Clear a filter to see other records; no substitute has been inferred.
| Brand / full designation | Named dimensions (mm / in) | Dynamic C (kN) | Static C0 (kN) | Reference speed (rpm) | Limiting speed (rpm) | Mass (kg / g) |
|---|---|---|---|---|---|---|
| KOYO7305Angular contact ball bearing |
| 33 kN | 15.8 kN | — | 11000 rpmLimiting Speeds(Grease Lub.): 11000 min-1Limiting Speeds(Oil Lub.): 13000 min-1 | 0.243 kg243 g |
| SKF7305 ACCBMSingle row angular contact ball bearing with 25° contact angle |
| 29 kN | 17 kN | 15000 rpm | 23000 rpm | 0.245 kg245 g |
| SKF7305 BE-2RZPSingle row angular contact ball bearing with 40° contact angle and non-contact seals on both sides |
| 24.2 kN | 14 kN | 15000 rpm | 11000 rpm | 0.231 kg231 g |
| SKF7305 BECBMSingle row angular contact ball bearing |
| 26.5 kN | 15.3 kN | 15000 rpm | 19000 rpm | 0.245 kg245 g |
| SKF7305 BECBPSingle row angular contact ball bearing |
| 26.5 kN | 15.3 kN | 15000 rpm | 15000 rpm | 0.223 kg223 g |
| SKF7305 BECBYSingle row angular contact ball bearing |
| 26.5 kN | 15.3 kN | 15000 rpm | 15000 rpm | 0.241 kg241 g |
| SKF7305 BEGAPSingle row angular contact ball bearing |
| 26.5 kN | 15.3 kN | 15000 rpm | 15000 rpm | 0.223 kg223 g |
| SKF7305 BEGBPSingle row angular contact ball bearing |
| 26.5 kN | 15.3 kN | 15000 rpm | 15000 rpm | 0.223 kg223 g |
| SKF7305 BEGBYSingle row angular contact ball bearing |
| 26.5 kN | 15.3 kN | 15000 rpm | 15000 rpm | 0.241 kg241 g |
| SKF7305 BEPSingle row angular contact ball bearing |
| 24.2 kN | 14 kN | 15000 rpm | 14000 rpm | 0.223 kg223 g |
| FAG7305-B-XL-2RS-TVPAngular contact ball bearing |
| 30 kN | 15.8 kN | — | 7100 rpm | 0.23 kg230 g |
| FAG7305-B-XL-JPAngular contact ball bearing |
| 30 kN | 15.8 kN | 9800 rpm | 15800 rpm | 0.23 kg230 g |
| FAG7305-B-XL-JP-UAAngular contact ball bearing |
| 30 kN | 15.8 kN | 9800 rpm | 15800 rpm | 0.23 kg230 g |
| FAG7305-B-XL-JP-UOAngular contact ball bearing |
| 30 kN | 15.8 kN | 9800 rpm | 15800 rpm | 0.23 kg230 g |
| FAG7305-B-XL-MPAngular contact ball bearing |
| 28 kN | 14.2 kN | 9900 rpm | 20500 rpm | 0.25 kg250 g |
| FAG7305-B-XL-MP-UAAngular contact ball bearing |
| 28 kN | 14.2 kN | 9900 rpm | 20500 rpm | 0.25 kg250 g |
| FAG7305-B-XL-MP-UOAngular contact ball bearing |
| 28 kN | 14.2 kN | 9900 rpm | 20500 rpm | 0.25 kg250 g |
| FAG7305-B-XL-TVPAngular contact ball bearing |
| 30 kN | 15.8 kN | 9800 rpm | 15800 rpm | 0.22 kg220 g |
| FAG7305-B-XL-TVP-P5Angular contact ball bearing |
| 30 kN | 15.8 kN | 9800 rpm | 15800 rpm | 0.22 kg220 g |
| FAG7305-B-XL-TVP-UAAngular contact ball bearing |
| 30 kN | 15.8 kN | 9800 rpm | 15800 rpm | 0.22 kg220 g |
| FAG7305-B-XL-TVP-UBAngular contact ball bearing |
| 30 kN | 15.8 kN | 9800 rpm | 15800 rpm | 0.22 kg220 g |
| FAG7305-B-XL-TVP-UOAngular contact ball bearing |
| 30 kN | 15.8 kN | 9800 rpm | 15800 rpm | 0.226 kg226 g |
| TIMKEN7305WNAngular contact ball bearing |
| 24.4 kN | 14.6 kN | — | — | 0.24 kg240 g |
| TIMKEN7305WNSUAngular contact ball bearing |
| 24.4 kN | 14.6 kN | — | — | 0.24 kg240 g |
| NSK7305AWAngular contact ball bearing |
| 29.1 kN | 15.8 kN | — | — | 0.235 kg235 g |
| NSK7305AWDBAngular contact ball bearing |
| 47 kN | 31.5 kN | — | — | — |
| NSK7305AWDFAngular contact ball bearing |
| 47 kN | 31.5 kN | — | — | — |
| NSK7305AWDTAngular contact ball bearing |
| 47 kN | 31.5 kN | — | — | — |
| NSK7305BEAT85Angular contact ball bearing |
| 28.4 kN | 14.9 kN | — | — | 0.229 kg229 g |
| NSK7305BWAngular contact ball bearing |
| 26.8 kN | 14.6 kN | — | — | 0.241 kg241 g |
| NSK7305BWDBAngular contact ball bearing |
| 43.5 kN | 29.3 kN | — | — | — |
| NSK7305BWDFAngular contact ball bearing |
| 43.5 kN | 29.3 kN | — | — | — |
| NSK7305BWDTAngular contact ball bearing |
| 43.5 kN | 29.3 kN | — | — | — |
| KOYO7305BAngular contact ball bearing |
| 30.5 kN | 14.6 kN | — | 8000 rpmLimiting Speeds(Grease Lub.): 8000 min-1Limiting Speeds(Oil Lub.): 11000 min-1 | 0.243 kg243 g |
| KOYO7305BDBAngular contact ball bearing |
| 49.5 kN | 29.2 kN | — | 6600 rpmLimiting Speeds(Grease Lub.): 6600 min-1Limiting Speeds(Oil Lub.): 8800 min-1 | 0.486 kg486 g |
| KOYO7305BDB FYAngular contact ball bearing |
| 46.5 kN | 26.6 kN | — | 8300 rpmLimiting Speeds(Grease Lub.): 8300 min-1Limiting Speeds(Oil Lub.): 11000 min-1 | 0.486 kg486 g |
| KOYO7305BDFAngular contact ball bearing |
| 49.5 kN | 29.2 kN | — | 6600 rpmLimiting Speeds(Grease Lub.): 6600 min-1Limiting Speeds(Oil Lub.): 8800 min-1 | 0.486 kg486 g |
| KOYO7305BDF FYAngular contact ball bearing |
| 46.5 kN | 26.6 kN | — | 8300 rpmLimiting Speeds(Grease Lub.): 8300 min-1Limiting Speeds(Oil Lub.): 11000 min-1 | 0.486 kg486 g |
| KOYO7305BDTAngular contact ball bearing |
| 49.5 kN | 29.2 kN | — | 6600 rpmLimiting Speeds(Grease Lub.): 6600 min-1Limiting Speeds(Oil Lub.): 8800 min-1 | 0.486 kg486 g |
| KOYO7305BDT FYAngular contact ball bearing |
| 46.5 kN | 26.6 kN | — | 8300 rpmLimiting Speeds(Grease Lub.): 8300 min-1Limiting Speeds(Oil Lub.): 11000 min-1 | 0.486 kg486 g |
| KOYO7305B FYAngular contact ball bearing |
| 28.6 kN | 13.3 kN | — | 10000 rpmLimiting Speeds(Grease Lub.): 10000 min-1Limiting Speeds(Oil Lub.): 14000 min-1 | 0.243 kg243 g |
| KOYO7305CAngular contact ball bearing |
| 35.1 kN | 16.8 kN | — | 15000 rpmLimiting Speeds(Grease Lub.): 15000 min-1Limiting Speeds(Oil Lub.): 20000 min-1 | 0.243 kg243 g |
| KOYO7305CDBAngular contact ball bearing |
| 57 kN | 33.7 kN | — | 12000 rpmLimiting Speeds(Grease Lub.): 12000 min-1Limiting Speeds(Oil Lub.): 16000 min-1 | 0.486 kg486 g |
| KOYO7305CDB FYAngular contact ball bearing |
| 53.5 kN | 30.6 kN | — | 15000 rpmLimiting Speeds(Grease Lub.): 15000 min-1Limiting Speeds(Oil Lub.): 20000 min-1 | 0.486 kg486 g |
| KOYO7305CDFAngular contact ball bearing |
| 57 kN | 33.7 kN | — | 12000 rpmLimiting Speeds(Grease Lub.): 12000 min-1Limiting Speeds(Oil Lub.): 16000 min-1 | 0.486 kg486 g |
| KOYO7305CDF FYAngular contact ball bearing |
| 53.5 kN | 30.6 kN | — | 15000 rpmLimiting Speeds(Grease Lub.): 15000 min-1Limiting Speeds(Oil Lub.): 20000 min-1 | 0.486 kg486 g |
| KOYO7305CDTAngular contact ball bearing |
| 57 kN | 33.7 kN | — | 12000 rpmLimiting Speeds(Grease Lub.): 12000 min-1Limiting Speeds(Oil Lub.): 16000 min-1 | 0.486 kg486 g |
| KOYO7305CDT FYAngular contact ball bearing |
| 53.5 kN | 30.6 kN | — | 15000 rpmLimiting Speeds(Grease Lub.): 15000 min-1Limiting Speeds(Oil Lub.): 20000 min-1 | 0.486 kg486 g |
| KOYO7305C FYAngular contact ball bearing |
| 33 kN | 15.3 kN | — | 19000 rpmLimiting Speeds(Grease Lub.): 19000 min-1Limiting Speeds(Oil Lub.): 25000 min-1 | 0.243 kg243 g |
| KOYO7305DBAngular contact ball bearing |
| 53.6 kN | 31.6 kN | — | 8800 rpmLimiting Speeds(Grease Lub.): 8800 min-1Limiting Speeds(Oil Lub.): 11000 min-1 | 0.486 kg486 g |
| KOYO7305DB FYAngular contact ball bearing |
| 50.3 kN | 28.8 kN | — | 11000 rpmLimiting Speeds(Grease Lub.): 11000 min-1Limiting Speeds(Oil Lub.): 14000 min-1 | 0.486 kg486 g |
| KOYO7305DFAngular contact ball bearing |
| 53.6 kN | 31.6 kN | — | 8800 rpmLimiting Speeds(Grease Lub.): 8800 min-1Limiting Speeds(Oil Lub.): 11000 min-1 | 0.486 kg486 g |
| KOYO7305DF FYAngular contact ball bearing |
| 50.3 kN | 28.8 kN | — | 11000 rpmLimiting Speeds(Grease Lub.): 11000 min-1Limiting Speeds(Oil Lub.): 14000 min-1 | 0.486 kg486 g |
| KOYO7305DTAngular contact ball bearing |
| 53.6 kN | 31.6 kN | — | 8800 rpmLimiting Speeds(Grease Lub.): 8800 min-1Limiting Speeds(Oil Lub.): 11000 min-1 | 0.486 kg486 g |
| KOYO7305DT FYAngular contact ball bearing |
| 50.3 kN | 28.8 kN | — | 11000 rpmLimiting Speeds(Grease Lub.): 11000 min-1Limiting Speeds(Oil Lub.): 14000 min-1 | 0.486 kg486 g |
| KOYO7305 FYAngular contact ball bearing |
| 31 kN | 14.4 kN | — | 14000 rpmLimiting Speeds(Grease Lub.): 14000 min-1Limiting Speeds(Oil Lub.): 17000 min-1 | 0.243 kg243 g |
Compare recorded seals, clearance, precision and materials
Manufacturer wording is retained. A missing property is not inferred from another brand or a similar suffix.
| Brand / designation | Closure | Original precision | Clearance | Cage | Material | Lubricant |
|---|---|---|---|---|---|---|
| KOYO 7305 | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| SKF 7305 ACCBM | Without | P6 | Not recorded | Machined brass | Bearing steel | None |
| SKF 7305 BE-2RZP | Seal on both sides | Normal | Not recorded | Non-metallic | Bearing steel | Grease |
| SKF 7305 BECBM | Without | P6 | Not recorded | Machined brass | Bearing steel | None |
| SKF 7305 BECBP | Without | P6 | Not recorded | Non-metallic | Bearing steel | None |
| SKF 7305 BECBY | Without | P6 | Not recorded | Brass sheet metal | Bearing steel | None |
| SKF 7305 BEGAP | Without | P6 | Not recorded | Non-metallic | Bearing steel | None |
| SKF 7305 BEGBP | Without | P6 | Not recorded | Non-metallic | Bearing steel | None |
| SKF 7305 BEGBY | Without | P6 | Not recorded | Brass sheet metal | Bearing steel | None |
| SKF 7305 BEP | Without | Normal | Not recorded | Non-metallic | Bearing steel | None |
| FAG 7305-B-XL-2RS-TVP | 2RS — Contact seal on both sides | P6 — Class 6 (ISO 492:2023) | Not recorded | TVP — Solid cage made of glass-fiber reinforced polyamid PA66 | Not recorded | GA14 — Ball bearing grease, low noise |
| FAG 7305-B-XL-JP | Without — Not sealed | P6 — Class 6 (ISO 492:2023) | Not recorded | JP — Steel sheet metal | Not recorded | Without — Bearing not greased |
| FAG 7305-B-XL-JP-UA | Without — Not sealed | P6 — Class 6 (ISO 492:2023) | Not recorded | JP — Steel sheet metal | Not recorded | Without — Bearing not greased |
| FAG 7305-B-XL-JP-UO | Without — Not sealed | P6 — Class 6 (ISO 492:2023) | Not recorded | JP — Steel sheet metal | Not recorded | Without — Bearing not greased |
| FAG 7305-B-XL-MP | Without — Not sealed | P6 — Class 6 (ISO 492:2023) | Not recorded | MP — Solid brass cage, ball guided | Not recorded | Without — Bearing not greased |
| FAG 7305-B-XL-MP-UA | Without — Not sealed | P6 — Class 6 (ISO 492:2023) | Not recorded | MP — Solid brass cage, ball guided | Not recorded | Without — Bearing not greased |
| FAG 7305-B-XL-MP-UO | Without — Not sealed | P6 — Class 6 (ISO 492:2023) | Not recorded | MP — Solid brass cage, ball guided | Not recorded | Without — Bearing not greased |
| FAG 7305-B-XL-TVP | Without — Not sealed | P6 — Class 6 (ISO 492:2023) | Not recorded | TVP — Solid cage made of glass-fiber reinforced polyamid PA66 | Not recorded | Without — Bearing not greased |
| FAG 7305-B-XL-TVP-P5 | Without — Not sealed | P5 — Class 5 (ISO 492:2023) | Not recorded | TVP — Solid cage made of glass-fiber reinforced polyamid PA66 | Not recorded | Without — Bearing not greased |
| FAG 7305-B-XL-TVP-UA | Without — Not sealed | P6 — Class 6 (ISO 492:2023) | Not recorded | TVP — Solid cage made of glass-fiber reinforced polyamid PA66 | Not recorded | Without — Bearing not greased |
| FAG 7305-B-XL-TVP-UB | Without — Not sealed | P6 — Class 6 (ISO 492:2023) | Not recorded | TVP — Solid cage made of glass-fiber reinforced polyamid PA66 | Not recorded | Without — Bearing not greased |
| FAG 7305-B-XL-TVP-UO | Without — Not sealed | P6 — Class 6 (ISO 492:2023) | Not recorded | TVP — Solid cage made of glass-fiber reinforced polyamid PA66 | Not recorded | Without — Bearing not greased |
| TIMKEN 7305WN | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 7305WNSU | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| NSK 7305AW | Not recorded | Not recorded | Not recorded | Pressed steel | Not recorded | Not recorded |
| NSK 7305AWDB | Not recorded | Not recorded | Not recorded | Pressed steel | Not recorded | Not recorded |
| NSK 7305AWDF | Not recorded | Not recorded | Not recorded | Pressed steel | Not recorded | Not recorded |
| NSK 7305AWDT | Not recorded | Not recorded | Not recorded | Pressed steel | Not recorded | Not recorded |
| NSK 7305BEAT85 | Not recorded | Not recorded | Not recorded | Polyamide 46 resin | Not recorded | Not recorded |
| NSK 7305BW | Not recorded | Not recorded | Not recorded | Pressed steel | Not recorded | Not recorded |
| NSK 7305BWDB | Not recorded | Not recorded | Not recorded | Pressed steel | Not recorded | Not recorded |
| NSK 7305BWDF | Not recorded | Not recorded | Not recorded | Pressed steel | Not recorded | Not recorded |
| NSK 7305BWDT | Not recorded | Not recorded | Not recorded | Pressed steel | Not recorded | Not recorded |
| KOYO 7305B | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 7305BDB | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 7305BDB FY | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 7305BDF | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 7305BDF FY | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 7305BDT | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 7305BDT FY | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 7305B FY | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 7305C | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 7305CDB | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 7305CDB FY | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 7305CDF | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 7305CDF FY | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 7305CDT | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 7305CDT FY | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 7305C FY | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 7305DB | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 7305DB FY | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 7305DF | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 7305DF FY | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 7305DT | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 7305DT FY | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 7305 FY | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
How to compare these values
- Use the displayed dimension names and original symbols. Housing length L, height H2 and flange width are not bearing outside diameter D. A catalogue width with an unverified symbol must not be assumed to be inner-ring width B or assembly width T. Open the product record for mounting dimensions and geometry.
- Inch values are calculated from the recorded millimetres using 25.4 mm per inch, rounded to six decimal places. They do not change a metric bearing into an inch-series bearing. Gram values are converted from the recorded mass in kilograms.
- C and C0 describe different rating conditions. They are not a single safe working-load limit and cannot replace an application load calculation.
- Reference and limiting speeds are separate catalogue values. The source grease/oil context is shown where recorded. Lubricant, seals, loads, fit, clearance and cooling affect the usable operating speed.
- A common base number does not prove equivalent seals, clearance, precision, material or interchangeability. Open the full designation for these fields.
Related prefix matches — other model numbers may appear
These discovery results can contain a longer number or a different component. They are not specifications for the requested exact model. Open the complete product to inspect its original geometry.
KOYO
7305
Angular contact ball bearing
View full technical record →SKF7305 ACCBM
Single row angular contact ball bearing with 25° contact angle
View full technical record →NSK7305AW
Angular contact ball bearing
View full technical record →NSK7305AWDB
Angular contact ball bearing
View full technical record →NSK7305AWDF
Angular contact ball bearing
View full technical record →NSK7305AWDT
Angular contact ball bearing
View full technical record →KOYO7305B
Angular contact ball bearing
View full technical record →KOYO7305BDB
Angular contact ball bearing
View full technical record →KOYO7305BDB FY
Angular contact ball bearing
View full technical record →KOYO7305BDF
Angular contact ball bearing
View full technical record →KOYO7305BDF FY
Angular contact ball bearing
View full technical record →KOYO7305BDT
Angular contact ball bearing
View full technical record →Check the drawing before substituting
Nominal dimensions are not shaft-fit tolerances. Different variants can add grooves, flanges, wider rings or assembly components. When the table has different dimensions, the complete designation—not the shared prefix—controls.
Reference basis & data limits
Manufacturer terminology is retained in the product records. Technical reference basis: JTEKT Basic Bearing Knowledge (boundary dimensions, tolerance classes and lubrication); NSK Bearing ABCs (lubrication, designations and clearance); NTN technical FAQs (closure codes and component interchange); SKF rolling-bearing selection and maintenance references.
Selection workflows and catalogue grouping are BearingScope editorial aids. Verify the current drawing and application requirements before using a candidate. Missing database information is not converted into an assumed match.