Find · understand · compare
7224 bearing dimensions & suffix variants
Look up recorded dimensions for designations beginning with 7224. The table retains complete manufacturer designations so special suffixes and different dimensional variants remain visible.
On this page5 sections ⌄
Find by measured dimensions
Enter bore d, outside diameter D and width B. Use decimals or inch fractions such as 1/2 or 1 1/4.
7224 dimensions and recorded technical data
Use the named dimensions for each complete record below. A generic d×D×B answer is not asserted where the base record is missing, dimension symbols are unverified, or the product uses a different geometry such as a housing or thrust assembly. Suffix records are not substituted for a missing base specification.
The numeric series boundary is preserved: a longer number is not included merely because its first digits match. 48 recorded variants are listed. A dash means the value is missing, not zero.
No recorded variant matches these filters. Clear a filter to see other records; no substitute has been inferred.
| Brand / full designation | Named dimensions (mm / in) | Dynamic C (kN) | Static C0 (kN) | Reference speed (rpm) | Limiting speed (rpm) | Mass (kg / g) |
|---|---|---|---|---|---|---|
| SKF7224 ACDGA/HCP4ASuper-precision, high-capacity, universally matchable single row angular contact ball bearing |
| 190 kN | 183 kN | — | — | 4.33 kg4330 g |
| SKF7224 ACDGA/P4ASuper-precision, high-capacity, universally matchable single row angular contact ball bearing |
| 190 kN | 183 kN | — | — | 5.31 kg5310 g |
| SKF7224 ACD/P4ASuper-precision, high-capacity, single row angular contact ball bearing |
| 190 kN | 183 kN | — | — | 5.31 kg5310 g |
| SKF7224 ACD/P4ADBAMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings |
| 307 kN | 365 kN | — | — | 10.6 kg10600 g |
| SKF7224 ACD/P4ADGAMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings |
| 307 kN | 365 kN | — | — | 10.6 kg10600 g |
| SKF7224 ACD/P4ADGBMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings |
| 307 kN | 365 kN | — | — | 10.6 kg10600 g |
| SKF7224 ACD/P4ADTMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings |
| 307 kN | 365 kN | — | — | 10.6 kg10600 g |
| SKF7224 BCBMSingle row angular contact ball bearing |
| 165 kN | 163 kN | 3600 rpm | 4300 rpm | 5.89 kg5890 g |
| SKF7224 BGAMSingle row angular contact ball bearing |
| 165 kN | 163 kN | 3600 rpm | 4300 rpm | 5.89 kg5890 g |
| SKF7224 BMSingle row angular contact ball bearing |
| 165 kN | 163 kN | 3600 rpm | 4300 rpm | 5.89 kg5890 g |
| SKF7224 CDGA/HCP4ASuper-precision, high-capacity, universally matchable single row angular contact ball bearing |
| 199 kN | 193 kN | — | — | 4.32 kg4320 g |
| SKF7224 CDGA/P4ASuper-precision, high-capacity, universally matchable single row angular contact ball bearing |
| 199 kN | 193 kN | — | — | 5.31 kg5310 g |
| SKF7224 CD/HCP4ASuper-precision, high-capacity, single row angular contact ball bearing |
| 199 kN | 193 kN | — | — | 4.33 kg4330 g |
| SKF7224 CD/HCP4ADGAMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings |
| 325 kN | 390 kN | — | — | 8.65 kg8650 g |
| SKF7224 CD/P4ASuper-precision, high-capacity, single row angular contact ball bearing |
| 199 kN | 193 kN | — | — | 5.31 kg5310 g |
| SKF7224 CD/P4ADBBMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings |
| 325 kN | 390 kN | — | — | 10.6 kg10600 g |
| SKF7224 CD/P4ADFBMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings |
| 325 kN | 390 kN | — | — | 10.6 kg10600 g |
| SKF7224 CD/P4ADGAMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings |
| 325 kN | 390 kN | — | — | 10.6 kg10600 g |
| FAG7224-B-XL-MPAngular contact ball bearing |
| 182 kN | 178 kN | 3700 rpm | 5200 rpm | 6.071 kg6071 g |
| FAG7224-B-XL-MP-P5-UOAngular contact ball bearing |
| 182 kN | 178 kN | 3700 rpm | 5200 rpm | 6.08 kg6080 g |
| FAG7224-B-XL-MP-UAAngular contact ball bearing |
| 182 kN | 178 kN | 3700 rpm | 5200 rpm | 5.969 kg5969 g |
| FAG7224-B-XL-MP-UBAngular contact ball bearing |
| 182 kN | 178 kN | 3700 rpm | 5200 rpm | 6 kg6000 g |
| FAG7224-B-XL-MP-UOAngular contact ball bearing |
| 182 kN | 178 kN | 3700 rpm | 5200 rpm | 5.978 kg5978 g |
| FAG7224-B-XL-TVPAngular contact ball bearing |
| 182 kN | 178 kN | 3700 rpm | 4000 rpm | 5.395 kg5395 g |
| FAG7224-B-XL-TVP-UAAngular contact ball bearing |
| 182 kN | 178 kN | 3700 rpm | 4000 rpm | 5.378 kg5378 g |
| FAG7224-B-XL-TVP-UOAngular contact ball bearing |
| 182 kN | 178 kN | 3700 rpm | 4000 rpm | 5.389 kg5389 g |
| TIMKEN7224WNMBRSUAngular contact ball bearing |
| 165 kN | 161 kN | — | — | 5.71 kg5710 g |
| NSK7224AAngular contact ball bearing |
| 201 kN | 177 kN | — | — | 6.22 kg6220 g |
| NSK7224ADBAngular contact ball bearing |
| 325 kN | 355 kN | — | — | — |
| NSK7224ADFAngular contact ball bearing |
| 325 kN | 355 kN | — | — | — |
| NSK7224ADTAngular contact ball bearing |
| 325 kN | 355 kN | — | — | — |
| NSK7224BAngular contact ball bearing |
| 182 kN | 162 kN | — | — | 6.26 kg6260 g |
| NSK7224BDBAngular contact ball bearing |
| 296 kN | 325 kN | — | — | — |
| NSK7224BDFAngular contact ball bearing |
| 296 kN | 325 kN | — | — | — |
| NSK7224BDTAngular contact ball bearing |
| 296 kN | 325 kN | — | — | — |
| NSK7224BEAT85Angular contact ball bearing |
| 197 kN | 177 kN | — | — | 5.37 kg5370 g |
| KOYO7224BDB FYAngular contact ball bearing |
| 321 kN | 302 kN | — | 2100 rpmLimiting Speeds(Grease Lub.): 2100 min-1Limiting Speeds(Oil Lub.): 2800 min-1 | 11 kg11000 g |
| KOYO7224BDF FYAngular contact ball bearing |
| 321 kN | 302 kN | — | 2100 rpmLimiting Speeds(Grease Lub.): 2100 min-1Limiting Speeds(Oil Lub.): 2800 min-1 | 11 kg11000 g |
| KOYO7224BDT FYAngular contact ball bearing |
| 321 kN | 302 kN | — | 2100 rpmLimiting Speeds(Grease Lub.): 2100 min-1Limiting Speeds(Oil Lub.): 2800 min-1 | 11 kg11000 g |
| KOYO7224B FYAngular contact ball bearing |
| 197 kN | 151 kN | — | 2600 rpmLimiting Speeds(Grease Lub.): 2600 min-1Limiting Speeds(Oil Lub.): 3400 min-1 | 5.49 kg5490 g |
| KOYO7224CDB FYAngular contact ball bearing |
| 385 kN | 359 kN | — | 3800 rpmLimiting Speeds(Grease Lub.): 3800 min-1Limiting Speeds(Oil Lub.): 5000 min-1 | 11 kg11000 g |
| KOYO7224CDF FYAngular contact ball bearing |
| 385 kN | 359 kN | — | 3800 rpmLimiting Speeds(Grease Lub.): 3800 min-1Limiting Speeds(Oil Lub.): 5000 min-1 | 11 kg11000 g |
| KOYO7224CDT FYAngular contact ball bearing |
| 385 kN | 359 kN | — | 3800 rpmLimiting Speeds(Grease Lub.): 3800 min-1Limiting Speeds(Oil Lub.): 5000 min-1 | 11 kg11000 g |
| KOYO7224C FYAngular contact ball bearing |
| 237 kN | 180 kN | — | 4800 rpmLimiting Speeds(Grease Lub.): 4800 min-1Limiting Speeds(Oil Lub.): 6300 min-1 | 5.49 kg5490 g |
| KOYO7224DB FYAngular contact ball bearing |
| 354 kN | 332 kN | — | 2700 rpmLimiting Speeds(Grease Lub.): 2700 min-1Limiting Speeds(Oil Lub.): 3400 min-1 | 11 kg11000 g |
| KOYO7224DF FYAngular contact ball bearing |
| 354 kN | 332 kN | — | 2700 rpmLimiting Speeds(Grease Lub.): 2700 min-1Limiting Speeds(Oil Lub.): 3400 min-1 | 11 kg11000 g |
| KOYO7224DT FYAngular contact ball bearing |
| 354 kN | 332 kN | — | 2700 rpmLimiting Speeds(Grease Lub.): 2700 min-1Limiting Speeds(Oil Lub.): 3400 min-1 | 11 kg11000 g |
| KOYO7224 FYAngular contact ball bearing |
| 218 kN | 166 kN | — | 3400 rpmLimiting Speeds(Grease Lub.): 3400 min-1Limiting Speeds(Oil Lub.): 4300 min-1 | 5.49 kg5490 g |
Compare recorded seals, clearance, precision and materials
Manufacturer wording is retained. A missing property is not inferred from another brand or a similar suffix.
| Brand / designation | Closure | Original precision | Clearance | Cage | Material | Lubricant |
|---|---|---|---|---|---|---|
| SKF 7224 ACDGA/HCP4A | Without | Not recorded | Not recorded | Not recorded | Hybrid (ceramic balls) | None |
| SKF 7224 ACDGA/P4A | Without | Not recorded | Not recorded | Not recorded | Bearing steel | None |
| SKF 7224 ACD/P4A | Without | Not recorded | Not recorded | Not recorded | Bearing steel | None |
| SKF 7224 ACD/P4ADBA | Without | Not recorded | Not recorded | Not recorded | Bearing steel | None |
| SKF 7224 ACD/P4ADGA | Without | Not recorded | Not recorded | Not recorded | Bearing steel | None |
| SKF 7224 ACD/P4ADGB | Without | Not recorded | Not recorded | Not recorded | Bearing steel | None |
| SKF 7224 ACD/P4ADT | Without | Not recorded | Not recorded | Not recorded | Bearing steel | None |
| SKF 7224 BCBM | Without | P6 | Not recorded | Machined brass | Bearing steel | None |
| SKF 7224 BGAM | Without | P6 | Not recorded | Machined brass | Bearing steel | None |
| SKF 7224 BM | Without | Normal | Not recorded | Machined brass | Bearing steel | None |
| SKF 7224 CDGA/HCP4A | Without | Not recorded | Not recorded | Not recorded | Hybrid (ceramic balls) | None |
| SKF 7224 CDGA/P4A | Without | Not recorded | Not recorded | Not recorded | Bearing steel | None |
| SKF 7224 CD/HCP4A | Without | Not recorded | Not recorded | Not recorded | Hybrid (ceramic balls) | None |
| SKF 7224 CD/HCP4ADGA | Without | Not recorded | Not recorded | Not recorded | Hybrid (ceramic balls) | None |
| SKF 7224 CD/P4A | Without | Not recorded | Not recorded | Not recorded | Bearing steel | None |
| SKF 7224 CD/P4ADBB | Without | Not recorded | Not recorded | Not recorded | Bearing steel | None |
| SKF 7224 CD/P4ADFB | Without | Not recorded | Not recorded | Not recorded | Bearing steel | None |
| SKF 7224 CD/P4ADGA | Without | Not recorded | Not recorded | Not recorded | Bearing steel | None |
| FAG 7224-B-XL-MP | Without — Not sealed | PN — Normal (ISO 492:2023) | Not recorded | MP — Solid brass cage, ball guided | Not recorded | Without — Bearing not greased |
| FAG 7224-B-XL-MP-P5-UO | Without — Not sealed | P5 — Class 5 (ISO 492:2023) | Not recorded | MP — Solid brass cage, ball guided | Not recorded | Without — Bearing not greased |
| FAG 7224-B-XL-MP-UA | Without — Not sealed | PN — Normal (ISO 492:2023) | Not recorded | MP — Solid brass cage, ball guided | Not recorded | Without — Bearing not greased |
| FAG 7224-B-XL-MP-UB | Without — Not sealed | PN — Normal (ISO 492:2023) | Not recorded | MP — Solid brass cage, ball guided | Not recorded | Without — Bearing not greased |
| FAG 7224-B-XL-MP-UO | Without — Not sealed | PN — Normal (ISO 492:2023) | Not recorded | MP — Solid brass cage, ball guided | Not recorded | Without — Bearing not greased |
| FAG 7224-B-XL-TVP | Without — Not sealed | PN — Normal (ISO 492:2023) | Not recorded | TVP — Solid cage made of glass-fiber reinforced polyamid PA66 | Not recorded | Without — Bearing not greased |
| FAG 7224-B-XL-TVP-UA | Without — Not sealed | PN — Normal (ISO 492:2023) | Not recorded | TVP — Solid cage made of glass-fiber reinforced polyamid PA66 | Not recorded | Without — Bearing not greased |
| FAG 7224-B-XL-TVP-UO | Without — Not sealed | PN — Normal (ISO 492:2023) | Not recorded | TVP — Solid cage made of glass-fiber reinforced polyamid PA66 | Not recorded | Without — Bearing not greased |
| TIMKEN 7224WNMBRSU | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| NSK 7224A | Not recorded | Not recorded | Not recorded | Machined brass, inner-ring guided | Not recorded | Not recorded |
| NSK 7224ADB | Not recorded | Not recorded | Not recorded | Machined brass, inner-ring guided | Not recorded | Not recorded |
| NSK 7224ADF | Not recorded | Not recorded | Not recorded | Machined brass, inner-ring guided | Not recorded | Not recorded |
| NSK 7224ADT | Not recorded | Not recorded | Not recorded | Machined brass, inner-ring guided | Not recorded | Not recorded |
| NSK 7224B | Not recorded | Not recorded | Not recorded | Machined brass, inner-ring guided | Not recorded | Not recorded |
| NSK 7224BDB | Not recorded | Not recorded | Not recorded | Machined brass, inner-ring guided | Not recorded | Not recorded |
| NSK 7224BDF | Not recorded | Not recorded | Not recorded | Machined brass, inner-ring guided | Not recorded | Not recorded |
| NSK 7224BDT | Not recorded | Not recorded | Not recorded | Machined brass, inner-ring guided | Not recorded | Not recorded |
| NSK 7224BEAT85 | Not recorded | Not recorded | Not recorded | Polyamide 46 resin | Not recorded | Not recorded |
| KOYO 7224BDB FY | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 7224BDF FY | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 7224BDT FY | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 7224B FY | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 7224CDB FY | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 7224CDF FY | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 7224CDT FY | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 7224C FY | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 7224DB FY | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 7224DF FY | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 7224DT FY | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 7224 FY | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
How to compare these values
- Use the displayed dimension names and original symbols. Housing length L, height H2 and flange width are not bearing outside diameter D. A catalogue width with an unverified symbol must not be assumed to be inner-ring width B or assembly width T. Open the product record for mounting dimensions and geometry.
- Inch values are calculated from the recorded millimetres using 25.4 mm per inch, rounded to six decimal places. They do not change a metric bearing into an inch-series bearing. Gram values are converted from the recorded mass in kilograms.
- C and C0 describe different rating conditions. They are not a single safe working-load limit and cannot replace an application load calculation.
- Reference and limiting speeds are separate catalogue values. The source grease/oil context is shown where recorded. Lubricant, seals, loads, fit, clearance and cooling affect the usable operating speed.
- A common base number does not prove equivalent seals, clearance, precision, material or interchangeability. Open the full designation for these fields.
Related prefix matches — other model numbers may appear
These discovery results can contain a longer number or a different component. They are not specifications for the requested exact model. Open the complete product to inspect its original geometry.
NSK
7224A
Angular contact ball bearing
View full technical record →SKF7224 ACDGA/HCP4A
Super-precision, high-capacity, universally matchable single row angular contact ball bearing
View full technical record →SKF7224 ACDGA/P4A
Super-precision, high-capacity, universally matchable single row angular contact ball bearing
View full technical record →SKF7224 ACD/P4A
Super-precision, high-capacity, single row angular contact ball bearing
View full technical record →SKF7224 ACD/P4ADBA
Matched set of two super-precision, high-capacity, D design, single row angular contact ball bearings
View full technical record →SKF7224 ACD/P4ADGA
Matched set of two super-precision, high-capacity, D design, single row angular contact ball bearings
View full technical record →SKF7224 ACD/P4ADGB
Matched set of two super-precision, high-capacity, D design, single row angular contact ball bearings
View full technical record →SKF7224 ACD/P4ADT
Matched set of two super-precision, high-capacity, D design, single row angular contact ball bearings
View full technical record →NSK7224ADB
Angular contact ball bearing
View full technical record →NSK7224ADF
Angular contact ball bearing
View full technical record →NSK7224ADT
Angular contact ball bearing
View full technical record →NSK7224B
Angular contact ball bearing
View full technical record →Check the drawing before substituting
Nominal dimensions are not shaft-fit tolerances. Different variants can add grooves, flanges, wider rings or assembly components. When the table has different dimensions, the complete designation—not the shared prefix—controls.
Reference basis & data limits
Manufacturer terminology is retained in the product records. Technical reference basis: JTEKT Basic Bearing Knowledge (boundary dimensions, tolerance classes and lubrication); NSK Bearing ABCs (lubrication, designations and clearance); NTN technical FAQs (closure codes and component interchange); SKF rolling-bearing selection and maintenance references.
Selection workflows and catalogue grouping are BearingScope editorial aids. Verify the current drawing and application requirements before using a candidate. Missing database information is not converted into an assumed match.