Find · understand · compare
7218 bearing dimensions & suffix variants
Look up recorded dimensions for designations beginning with 7218. The table retains complete manufacturer designations so special suffixes and different dimensional variants remain visible.
On this page5 sections ⌄
Find by measured dimensions
Enter bore d, outside diameter D and width B. Use decimals or inch fractions such as 1/2 or 1 1/4.
7218 dimensions and recorded technical data
The recorded 7218 base designation measures 90×160×30 mm (inside diameter d × outside diameter D × width B). This answer uses unsuffixed records from KOYO. It does not assign the same dimensions or operating ratings to every suffix.
The numeric series boundary is preserved: a longer number is not included merely because its first digits match. 90 recorded variants are listed. A dash means the value is missing, not zero.
No recorded variant matches these filters. Clear a filter to see other records; no substitute has been inferred.
| Brand / full designation | Named dimensions (mm / in) | Dynamic C (kN) | Static C0 (kN) | Reference speed (rpm) | Limiting speed (rpm) | Mass (kg / g) |
|---|---|---|---|---|---|---|
| KOYO7218Angular contact ball bearing |
| 147 kN | 103 kN | — | 3700 rpmLimiting Speeds(Grease Lub.): 3700 min-1Limiting Speeds(Oil Lub.): 4700 min-1 | 2.3 kg2300 g |
| SKF7218 ACDGA/P4ASuper-precision, high-capacity, universally matchable single row angular contact ball bearing |
| 121 kN | 106 kN | — | — | 2.22 kg2220 g |
| SKF7218 ACDGB/HCP4ASuper-precision, high-capacity, universally matchable single row angular contact ball bearing |
| 121 kN | 106 kN | — | — | 1.8 kg1800 g |
| SKF7218 ACDGB/P4ASuper-precision, high-capacity, universally matchable single row angular contact ball bearing |
| 121 kN | 106 kN | — | — | 2.22 kg2220 g |
| SKF7218 ACDGC/P4ASuper-precision, high-capacity, universally matchable single row angular contact ball bearing |
| 121 kN | 106 kN | — | — | 2.23 kg2230 g |
| SKF7218 ACD/HCP4ASuper-precision, high-capacity, single row angular contact ball bearing |
| 121 kN | 106 kN | — | — | 1.79 kg1790 g |
| SKF7218 ACD/HCP4ADGAMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings |
| 199 kN | 212 kN | — | — | 3.61 kg3610 g |
| SKF7218 ACD/HCP4ATBTBMatched set of three super-precision, high-capacity, D design, single row angular contact ball bearings |
| 265 kN | 320 kN | — | — | 5.41 kg5410 g |
| SKF7218 ACD/P4ASuper-precision, high-capacity, single row angular contact ball bearing |
| 121 kN | 106 kN | — | — | 2.22 kg2220 g |
| SKF7218 ACD/P4ADBAMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings |
| 199 kN | 212 kN | — | — | 4.43 kg4430 g |
| SKF7218 ACD/P4ADBBMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings |
| 199 kN | 212 kN | — | — | 4.46 kg4460 g |
| SKF7218 ACD/P4ADBCMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings |
| 199 kN | 212 kN | — | — | 4.46 kg4460 g |
| SKF7218 ACD/P4ADGAMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings |
| 199 kN | 212 kN | — | — | 4.43 kg4430 g |
| SKF7218 ACD/P4ADGBMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings |
| 199 kN | 212 kN | — | — | 4.43 kg4430 g |
| SKF7218 ACD/P4ADGCMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings |
| 199 kN | 212 kN | — | — | 4.46 kg4460 g |
| SKF7218 ACD/P4ADGDMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings |
| 199 kN | 212 kN | — | — | 4.46 kg4460 g |
| SKF7218 ACD/P4AQBCAMatched set of four super-precision, high-capacity, D design, single row angular contact ball bearings |
| 325 kN | 425 kN | — | — | 8.92 kg8920 g |
| SKF7218 ACD/P4AQBCBMatched set of four super-precision, high-capacity, D design, single row angular contact ball bearings |
| 325 kN | 425 kN | — | — | 8.92 kg8920 g |
| SKF7218 ACD/P4AQBCCMatched set of four super-precision, high-capacity, D design, single row angular contact ball bearings |
| 325 kN | 425 kN | — | — | 8.92 kg8920 g |
| SKF7218 ACD/P4ATBTBMatched set of three super-precision, high-capacity, D design, single row angular contact ball bearings |
| 265 kN | 320 kN | — | — | 6.65 kg6650 g |
| SKF7218 ACD/P4ATGBMatched set of three super-precision, high-capacity, D design, single row angular contact ball bearings |
| 265 kN | 320 kN | — | — | 6.69 kg6690 g |
| SKF7218 BECBJSingle row angular contact ball bearing |
| 116 kN | 104 kN | 5000 rpm | 5000 rpm | 2.32 kg2320 g |
| SKF7218 BECBMSingle row angular contact ball bearing |
| 116 kN | 104 kN | 5000 rpm | 6700 rpm | 2.44 kg2440 g |
| SKF7218 BECBPSingle row angular contact ball bearing |
| 116 kN | 104 kN | 5000 rpm | 5000 rpm | 2.22 kg2220 g |
| SKF7218 BECBYSingle row angular contact ball bearing |
| 116 kN | 104 kN | 5000 rpm | 5000 rpm | 2.34 kg2340 g |
| SKF7218 BECCMSingle row angular contact ball bearing |
| 116 kN | 104 kN | 5000 rpm | 6700 rpm | 2.44 kg2440 g |
| SKF7218 BEGAFSingle row angular contact ball bearing |
| 108 kN | 96.5 kN | 5000 rpm | 4500 rpm | 2.43 kg2430 g |
| SKF7218 BEGAMSingle row angular contact ball bearing |
| 116 kN | 104 kN | 5000 rpm | 6700 rpm | 2.44 kg2440 g |
| SKF7218 BEGAPSingle row angular contact ball bearing |
| 116 kN | 104 kN | 5000 rpm | 5000 rpm | 2.22 kg2220 g |
| SKF7218 BEGAYSingle row angular contact ball bearing |
| 116 kN | 104 kN | 5000 rpm | 5000 rpm | 2.34 kg2340 g |
| SKF7218 BEPSingle row angular contact ball bearing |
| 108 kN | 96.5 kN | 5000 rpm | 4500 rpm | 2.22 kg2220 g |
| SKF7218 CDGA/HCP4ASuper-precision, high-capacity, universally matchable single row angular contact ball bearing |
| 127 kN | 112 kN | — | — | 1.79 kg1790 g |
| SKF7218 CDGA/P4ASuper-precision, high-capacity, universally matchable single row angular contact ball bearing |
| 127 kN | 112 kN | — | — | 2.22 kg2220 g |
| SKF7218 CDGB/P4ASuper-precision, high-capacity, universally matchable single row angular contact ball bearing |
| 127 kN | 112 kN | — | — | 2.22 kg2220 g |
| SKF7218 CD/HCP4ASuper-precision, high-capacity, single row angular contact ball bearing |
| 127 kN | 112 kN | — | — | 1.79 kg1790 g |
| SKF7218 CD/HCP4ADBAMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings |
| 208 kN | 224 kN | — | — | 3.61 kg3610 g |
| SKF7218 CD/HCP4ADGAMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings |
| 208 kN | 224 kN | — | — | 3.58 kg3580 g |
| SKF7218 CD/P4ASuper-precision, high-capacity, single row angular contact ball bearing |
| 127 kN | 112 kN | — | — | 2.22 kg2220 g |
| SKF7218 CD/P4ADBBMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings |
| 208 kN | 224 kN | — | — | 4.43 kg4430 g |
| SKF7218 CD/P4ADBCMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings |
| 208 kN | 224 kN | — | — | 4.46 kg4460 g |
| SKF7218 CD/P4ADGAMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings |
| 208 kN | 224 kN | — | — | 4.43 kg4430 g |
| SKF7218 CD/P4ADGBMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings |
| 208 kN | 224 kN | — | — | 4.43 kg4430 g |
| SKF7218 CD/P4AQBCAMatched set of four super-precision, high-capacity, D design, single row angular contact ball bearings |
| 338 kN | 450 kN | — | — | 8.92 kg8920 g |
| FAG7218-B-XL-FP-UOAngular contact ball bearing |
| 114 kN | 98 kN | 4550 rpm | 5500 rpm | 2.32 kg2320 g |
| FAG7218-B-XL-JPAngular contact ball bearing |
| 114 kN | 98 kN | 4550 rpm | 5500 rpm | 2.26 kg2260 g |
| FAG7218-B-XL-JP-UAAngular contact ball bearing |
| 114 kN | 98 kN | 4550 rpm | 5500 rpm | 2.26 kg2260 g |
| FAG7218-B-XL-JP-UOAngular contact ball bearing |
| 114 kN | 98 kN | 4550 rpm | 5500 rpm | 2.26 kg2260 g |
| FAG7218-B-XL-MPAngular contact ball bearing |
| 114 kN | 98 kN | 4550 rpm | 7200 rpm | 2.47 kg2470 g |
| FAG7218-B-XL-MP-S1-UAAngular contact ball bearing |
| 114 kN | 98 kN | 4550 rpm | 7200 rpm | 2.47 kg2470 g |
| FAG7218-B-XL-MP-UAAngular contact ball bearing |
| 114 kN | 98 kN | 4550 rpm | 7200 rpm | 2.47 kg2470 g |
| FAG7218-B-XL-MP-UBAngular contact ball bearing |
| 114 kN | 98 kN | 4550 rpm | 7200 rpm | 2.47 kg2470 g |
| FAG7218-B-XL-MP-UOAngular contact ball bearing |
| 114 kN | 98 kN | 4550 rpm | 7200 rpm | 2.47 kg2470 g |
| FAG7218-B-XL-TVPAngular contact ball bearing |
| 114 kN | 98 kN | 4550 rpm | 5500 rpm | 2.19 kg2190 g |
| FAG7218-B-XL-TVP-P5-ULAngular contact ball bearing |
| 114 kN | 98 kN | 4550 rpm | 5500 rpm | 2.193 kg2193 g |
| FAG7218-B-XL-TVP-UAAngular contact ball bearing |
| 114 kN | 98 kN | 4550 rpm | 5500 rpm | 2.195 kg2195 g |
| FAG7218-B-XL-TVP-UBAngular contact ball bearing |
| 114 kN | 98 kN | 4550 rpm | 5500 rpm | 2.195 kg2195 g |
| FAG7218-B-XL-TVP-UOAngular contact ball bearing |
| 114 kN | 98 kN | 4550 rpm | 5500 rpm | 2.195 kg2195 g |
| TIMKEN7218WNSUAngular contact ball bearing |
| 107 kN | 93.9 kN | — | — | 2.36 kg2360 g |
| NSK7218AWAngular contact ball bearing |
| 130 kN | 103 kN | — | — | 2.25 kg2250 g |
| NSK7218AWDBAngular contact ball bearing |
| 210 kN | 206 kN | — | — | — |
| NSK7218AWDFAngular contact ball bearing |
| 210 kN | 206 kN | — | — | — |
| NSK7218AWDTAngular contact ball bearing |
| 210 kN | 206 kN | — | — | — |
| NSK7218BEAT85Angular contact ball bearing |
| 120 kN | 93.5 kN | — | — | 2.19 kg2190 g |
| NSK7218BWAngular contact ball bearing |
| 117 kN | 94 kN | — | — | 2.29 kg2290 g |
| NSK7218BWDBAngular contact ball bearing |
| 191 kN | 188 kN | — | — | — |
| NSK7218BWDFAngular contact ball bearing |
| 191 kN | 188 kN | — | — | — |
| NSK7218BWDTAngular contact ball bearing |
| 191 kN | 188 kN | — | — | — |
| KOYO7218BAngular contact ball bearing |
| 133 kN | 93.8 kN | — | 2800 rpmLimiting Speeds(Grease Lub.): 2800 min-1Limiting Speeds(Oil Lub.): 3700 min-1 | 2.3 kg2300 g |
| KOYO7218BDBAngular contact ball bearing |
| 217 kN | 188 kN | — | 2200 rpmLimiting Speeds(Grease Lub.): 2200 min-1Limiting Speeds(Oil Lub.): 3000 min-1 | 4.6 kg4600 g |
| KOYO7218BDB FYAngular contact ball bearing |
| 207 kN | 176 kN | — | 2800 rpmLimiting Speeds(Grease Lub.): 2800 min-1Limiting Speeds(Oil Lub.): 3800 min-1 | 4.6 kg4600 g |
| KOYO7218BDFAngular contact ball bearing |
| 217 kN | 188 kN | — | 2200 rpmLimiting Speeds(Grease Lub.): 2200 min-1Limiting Speeds(Oil Lub.): 3000 min-1 | 4.6 kg4600 g |
| KOYO7218BDF FYAngular contact ball bearing |
| 207 kN | 176 kN | — | 2800 rpmLimiting Speeds(Grease Lub.): 2800 min-1Limiting Speeds(Oil Lub.): 3800 min-1 | 4.6 kg4600 g |
| KOYO7218BDTAngular contact ball bearing |
| 217 kN | 188 kN | — | 2200 rpmLimiting Speeds(Grease Lub.): 2200 min-1Limiting Speeds(Oil Lub.): 3000 min-1 | 4.6 kg4600 g |
| KOYO7218BDT FYAngular contact ball bearing |
| 207 kN | 176 kN | — | 2800 rpmLimiting Speeds(Grease Lub.): 2800 min-1Limiting Speeds(Oil Lub.): 3800 min-1 | 4.6 kg4600 g |
| KOYO7218B FYAngular contact ball bearing |
| 128 kN | 88 kN | — | 3500 rpmLimiting Speeds(Grease Lub.): 3500 min-1Limiting Speeds(Oil Lub.): 4700 min-1 | 2.3 kg2300 g |
| KOYO7218CAngular contact ball bearing |
| 160 kN | 112 kN | — | 5200 rpmLimiting Speeds(Grease Lub.): 5200 min-1Limiting Speeds(Oil Lub.): 6800 min-1 | 2.3 kg2300 g |
| KOYO7218CDBAngular contact ball bearing |
| 260 kN | 223 kN | — | 4100 rpmLimiting Speeds(Grease Lub.): 4100 min-1Limiting Speeds(Oil Lub.): 5500 min-1 | 4.6 kg4600 g |
| KOYO7218CDB FYAngular contact ball bearing |
| 249 kN | 209 kN | — | 5200 rpmLimiting Speeds(Grease Lub.): 5200 min-1Limiting Speeds(Oil Lub.): 6900 min-1 | 4.6 kg4600 g |
| KOYO7218CDFAngular contact ball bearing |
| 260 kN | 223 kN | — | 4100 rpmLimiting Speeds(Grease Lub.): 4100 min-1Limiting Speeds(Oil Lub.): 5500 min-1 | 4.6 kg4600 g |
| KOYO7218CDF FYAngular contact ball bearing |
| 249 kN | 209 kN | — | 5200 rpmLimiting Speeds(Grease Lub.): 5200 min-1Limiting Speeds(Oil Lub.): 6900 min-1 | 4.6 kg4600 g |
| KOYO7218CDTAngular contact ball bearing |
| 260 kN | 223 kN | — | 4100 rpmLimiting Speeds(Grease Lub.): 4100 min-1Limiting Speeds(Oil Lub.): 5500 min-1 | 4.6 kg4600 g |
| KOYO7218CDT FYAngular contact ball bearing |
| 249 kN | 209 kN | — | 5200 rpmLimiting Speeds(Grease Lub.): 5200 min-1Limiting Speeds(Oil Lub.): 6900 min-1 | 4.6 kg4600 g |
| KOYO7218C FYAngular contact ball bearing |
| 153 kN | 105 kN | — | 6500 rpmLimiting Speeds(Grease Lub.): 6500 min-1Limiting Speeds(Oil Lub.): 8600 min-1 | 2.3 kg2300 g |
| KOYO7218DBAngular contact ball bearing |
| 239 kN | 206 kN | — | 3000 rpmLimiting Speeds(Grease Lub.): 3000 min-1Limiting Speeds(Oil Lub.): 3700 min-1 | 4.6 kg4600 g |
| KOYO7218DB FYAngular contact ball bearing |
| 229 kN | 193 kN | — | 3800 rpmLimiting Speeds(Grease Lub.): 3800 min-1Limiting Speeds(Oil Lub.): 4700 min-1 | 4.6 kg4600 g |
| KOYO7218DFAngular contact ball bearing |
| 239 kN | 206 kN | — | 3000 rpmLimiting Speeds(Grease Lub.): 3000 min-1Limiting Speeds(Oil Lub.): 3700 min-1 | 4.6 kg4600 g |
| KOYO7218DF FYAngular contact ball bearing |
| 229 kN | 193 kN | — | 3800 rpmLimiting Speeds(Grease Lub.): 3800 min-1Limiting Speeds(Oil Lub.): 4700 min-1 | 4.6 kg4600 g |
| KOYO7218DTAngular contact ball bearing |
| 239 kN | 206 kN | — | 3000 rpmLimiting Speeds(Grease Lub.): 3000 min-1Limiting Speeds(Oil Lub.): 3700 min-1 | 4.6 kg4600 g |
| KOYO7218DT FYAngular contact ball bearing |
| 229 kN | 193 kN | — | 3800 rpmLimiting Speeds(Grease Lub.): 3800 min-1Limiting Speeds(Oil Lub.): 4700 min-1 | 4.6 kg4600 g |
| KOYO7218 FYAngular contact ball bearing |
| 141 kN | 96.7 kN | — | 4700 rpmLimiting Speeds(Grease Lub.): 4700 min-1Limiting Speeds(Oil Lub.): 5900 min-1 | 2.3 kg2300 g |
Compare recorded seals, clearance, precision and materials
Manufacturer wording is retained. A missing property is not inferred from another brand or a similar suffix.
| Brand / designation | Closure | Original precision | Clearance | Cage | Material | Lubricant |
|---|---|---|---|---|---|---|
| KOYO 7218 | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| SKF 7218 ACDGA/P4A | Without | Not recorded | Not recorded | Not recorded | Bearing steel | None |
| SKF 7218 ACDGB/HCP4A | Without | Not recorded | Not recorded | Not recorded | Hybrid (ceramic balls) | None |
| SKF 7218 ACDGB/P4A | Without | Not recorded | Not recorded | Not recorded | Bearing steel | None |
| SKF 7218 ACDGC/P4A | Without | Not recorded | Not recorded | Not recorded | Bearing steel | None |
| SKF 7218 ACD/HCP4A | Without | Not recorded | Not recorded | Not recorded | Hybrid (ceramic balls) | None |
| SKF 7218 ACD/HCP4ADGA | Without | Not recorded | Not recorded | Not recorded | Hybrid (ceramic balls) | None |
| SKF 7218 ACD/HCP4ATBTB | Without | Not recorded | Not recorded | Not recorded | Hybrid (ceramic balls) | None |
| SKF 7218 ACD/P4A | Without | Not recorded | Not recorded | Not recorded | Bearing steel | None |
| SKF 7218 ACD/P4ADBA | Without | Not recorded | Not recorded | Not recorded | Bearing steel | None |
| SKF 7218 ACD/P4ADBB | Without | Not recorded | Not recorded | Not recorded | Bearing steel | None |
| SKF 7218 ACD/P4ADBC | Without | Not recorded | Not recorded | Not recorded | Bearing steel | None |
| SKF 7218 ACD/P4ADGA | Without | Not recorded | Not recorded | Not recorded | Bearing steel | None |
| SKF 7218 ACD/P4ADGB | Without | Not recorded | Not recorded | Not recorded | Bearing steel | None |
| SKF 7218 ACD/P4ADGC | Without | Not recorded | Not recorded | Not recorded | Bearing steel | None |
| SKF 7218 ACD/P4ADGD | Without | Not recorded | Not recorded | Not recorded | Bearing steel | None |
| SKF 7218 ACD/P4AQBCA | Without | Not recorded | Not recorded | Not recorded | Bearing steel | None |
| SKF 7218 ACD/P4AQBCB | Without | Not recorded | Not recorded | Not recorded | Bearing steel | None |
| SKF 7218 ACD/P4AQBCC | Without | Not recorded | Not recorded | Not recorded | Bearing steel | None |
| SKF 7218 ACD/P4ATBTB | Without | Not recorded | Not recorded | Not recorded | Bearing steel | None |
| SKF 7218 ACD/P4ATGB | Without | Not recorded | Not recorded | Not recorded | Bearing steel | None |
| SKF 7218 BECBJ | Without | P6 | Not recorded | Steel sheet metal | Bearing steel | None |
| SKF 7218 BECBM | Without | P6 | Not recorded | Machined brass | Bearing steel | None |
| SKF 7218 BECBP | Without | P6 | Not recorded | Non-metallic | Bearing steel | None |
| SKF 7218 BECBY | Without | P6 | Not recorded | Brass sheet metal | Bearing steel | None |
| SKF 7218 BECCM | Without | P6 | Not recorded | Machined brass | Bearing steel | None |
| SKF 7218 BEGAF | Without | P6 | Not recorded | Machined steel | Bearing steel | None |
| SKF 7218 BEGAM | Without | P6 | Not recorded | Machined brass | Bearing steel | None |
| SKF 7218 BEGAP | Without | P6 | Not recorded | Non-metallic | Bearing steel | None |
| SKF 7218 BEGAY | Without | P6 | Not recorded | Brass sheet metal | Bearing steel | None |
| SKF 7218 BEP | Without | Normal | Not recorded | Non-metallic | Bearing steel | None |
| SKF 7218 CDGA/HCP4A | Without | Not recorded | Not recorded | Not recorded | Hybrid (ceramic balls) | None |
| SKF 7218 CDGA/P4A | Without | Not recorded | Not recorded | Not recorded | Bearing steel | None |
| SKF 7218 CDGB/P4A | Without | Not recorded | Not recorded | Not recorded | Bearing steel | None |
| SKF 7218 CD/HCP4A | Without | Not recorded | Not recorded | Not recorded | Hybrid (ceramic balls) | None |
| SKF 7218 CD/HCP4ADBA | Without | Not recorded | Not recorded | Not recorded | Hybrid (ceramic balls) | None |
| SKF 7218 CD/HCP4ADGA | Without | Not recorded | Not recorded | Not recorded | Hybrid (ceramic balls) | None |
| SKF 7218 CD/P4A | Without | Not recorded | Not recorded | Not recorded | Bearing steel | None |
| SKF 7218 CD/P4ADBB | Without | Not recorded | Not recorded | Not recorded | Bearing steel | None |
| SKF 7218 CD/P4ADBC | Without | Not recorded | Not recorded | Not recorded | Bearing steel | None |
| SKF 7218 CD/P4ADGA | Without | Not recorded | Not recorded | Not recorded | Bearing steel | None |
| SKF 7218 CD/P4ADGB | Without | Not recorded | Not recorded | Not recorded | Bearing steel | None |
| SKF 7218 CD/P4AQBCA | Without | Not recorded | Not recorded | Not recorded | Bearing steel | None |
| FAG 7218-B-XL-FP-UO | Without — Not sealed | PN — Normal (ISO 492:2023) | Not recorded | FP — Solid steel cage, ball guided | Not recorded | Without — Bearing not greased |
| FAG 7218-B-XL-JP | Without — Not sealed | PN — Normal (ISO 492:2023) | Not recorded | JP — Steel sheet metal | Not recorded | Without — Bearing not greased |
| FAG 7218-B-XL-JP-UA | Without — Not sealed | PN — Normal (ISO 492:2023) | Not recorded | JP — Steel sheet metal | Not recorded | Without — Bearing not greased |
| FAG 7218-B-XL-JP-UO | Without — Not sealed | PN — Normal (ISO 492:2023) | Not recorded | JP — Steel sheet metal | Not recorded | Without — Bearing not greased |
| FAG 7218-B-XL-MP | Without — Not sealed | PN — Normal (ISO 492:2023) | Not recorded | MP — Solid brass cage, ball guided | Not recorded | Without — Bearing not greased |
| FAG 7218-B-XL-MP-S1-UA | Without — Not sealed | PN — Normal (ISO 492:2023) | Not recorded | MP — Solid brass cage, ball guided | Not recorded | Without — Bearing not greased |
| FAG 7218-B-XL-MP-UA | Without — Not sealed | PN — Normal (ISO 492:2023) | Not recorded | MP — Solid brass cage, ball guided | Not recorded | Without — Bearing not greased |
| FAG 7218-B-XL-MP-UB | Without — Not sealed | PN — Normal (ISO 492:2023) | Not recorded | MP — Solid brass cage, ball guided | Not recorded | Without — Bearing not greased |
| FAG 7218-B-XL-MP-UO | Without — Not sealed | PN — Normal (ISO 492:2023) | Not recorded | MP — Solid brass cage, ball guided | Not recorded | Without — Bearing not greased |
| FAG 7218-B-XL-TVP | Without — Not sealed | PN — Normal (ISO 492:2023) | Not recorded | TVP — Solid cage made of glass-fiber reinforced polyamid PA66 | Not recorded | Without — Bearing not greased |
| FAG 7218-B-XL-TVP-P5-UL | Without — Not sealed | P5 — Class 5 (ISO 492:2023) | Not recorded | TVP — Solid cage made of glass-fiber reinforced polyamid PA66 | Not recorded | Without — Bearing not greased |
| FAG 7218-B-XL-TVP-UA | Without — Not sealed | PN — Normal (ISO 492:2023) | Not recorded | TVP — Solid cage made of glass-fiber reinforced polyamid PA66 | Not recorded | Without — Bearing not greased |
| FAG 7218-B-XL-TVP-UB | Without — Not sealed | PN — Normal (ISO 492:2023) | Not recorded | TVP — Solid cage made of glass-fiber reinforced polyamid PA66 | Not recorded | Without — Bearing not greased |
| FAG 7218-B-XL-TVP-UO | Without — Not sealed | PN — Normal (ISO 492:2023) | Not recorded | TVP — Solid cage made of glass-fiber reinforced polyamid PA66 | Not recorded | Without — Bearing not greased |
| TIMKEN 7218WNSU | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| NSK 7218AW | Not recorded | Not recorded | Not recorded | Pressed steel | Not recorded | Not recorded |
| NSK 7218AWDB | Not recorded | Not recorded | Not recorded | Pressed steel | Not recorded | Not recorded |
| NSK 7218AWDF | Not recorded | Not recorded | Not recorded | Pressed steel | Not recorded | Not recorded |
| NSK 7218AWDT | Not recorded | Not recorded | Not recorded | Pressed steel | Not recorded | Not recorded |
| NSK 7218BEAT85 | Not recorded | Not recorded | Not recorded | Polyamide 46 resin | Not recorded | Not recorded |
| NSK 7218BW | Not recorded | Not recorded | Not recorded | Pressed steel | Not recorded | Not recorded |
| NSK 7218BWDB | Not recorded | Not recorded | Not recorded | Pressed steel | Not recorded | Not recorded |
| NSK 7218BWDF | Not recorded | Not recorded | Not recorded | Pressed steel | Not recorded | Not recorded |
| NSK 7218BWDT | Not recorded | Not recorded | Not recorded | Pressed steel | Not recorded | Not recorded |
| KOYO 7218B | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 7218BDB | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 7218BDB FY | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 7218BDF | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 7218BDF FY | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 7218BDT | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 7218BDT FY | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 7218B FY | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 7218C | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 7218CDB | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 7218CDB FY | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 7218CDF | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 7218CDF FY | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 7218CDT | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 7218CDT FY | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 7218C FY | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 7218DB | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 7218DB FY | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 7218DF | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 7218DF FY | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 7218DT | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 7218DT FY | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 7218 FY | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
How to compare these values
- Use the displayed dimension names and original symbols. Housing length L, height H2 and flange width are not bearing outside diameter D. A catalogue width with an unverified symbol must not be assumed to be inner-ring width B or assembly width T. Open the product record for mounting dimensions and geometry.
- Inch values are calculated from the recorded millimetres using 25.4 mm per inch, rounded to six decimal places. They do not change a metric bearing into an inch-series bearing. Gram values are converted from the recorded mass in kilograms.
- C and C0 describe different rating conditions. They are not a single safe working-load limit and cannot replace an application load calculation.
- Reference and limiting speeds are separate catalogue values. The source grease/oil context is shown where recorded. Lubricant, seals, loads, fit, clearance and cooling affect the usable operating speed.
- A common base number does not prove equivalent seals, clearance, precision, material or interchangeability. Open the full designation for these fields.
Related prefix matches — other model numbers may appear
These discovery results can contain a longer number or a different component. They are not specifications for the requested exact model. Open the complete product to inspect its original geometry.
KOYO
7218
Angular contact ball bearing
View full technical record →TIMKEN72187C / 72487
Tapered roller bearing
View full technical record →TIMKEN72188C / 72487
Tapered roller bearing
View full technical record →TIMKEN72188C-90046
Tapered roller bearing
View full technical record →TIMKEN72188C-90049
Tapered roller bearing
View full technical record →TIMKEN72188C-90050
Tapered roller bearing
View full technical record →TIMKEN72188C-90051
Tapered roller bearing
View full technical record →SKF7218 ACDGA/P4A
Super-precision, high-capacity, universally matchable single row angular contact ball bearing
View full technical record →SKF7218 ACDGB/HCP4A
Super-precision, high-capacity, universally matchable single row angular contact ball bearing
View full technical record →SKF7218 ACDGB/P4A
Super-precision, high-capacity, universally matchable single row angular contact ball bearing
View full technical record →SKF7218 ACDGC/P4A
Super-precision, high-capacity, universally matchable single row angular contact ball bearing
View full technical record →SKF7218 ACD/HCP4A
Super-precision, high-capacity, single row angular contact ball bearing
View full technical record →Check the drawing before substituting
Nominal dimensions are not shaft-fit tolerances. Different variants can add grooves, flanges, wider rings or assembly components. When the table has different dimensions, the complete designation—not the shared prefix—controls.
Reference basis & data limits
Manufacturer terminology is retained in the product records. Technical reference basis: JTEKT Basic Bearing Knowledge (boundary dimensions, tolerance classes and lubrication); NSK Bearing ABCs (lubrication, designations and clearance); NTN technical FAQs (closure codes and component interchange); SKF rolling-bearing selection and maintenance references.
Selection workflows and catalogue grouping are BearingScope editorial aids. Verify the current drawing and application requirements before using a candidate. Missing database information is not converted into an assumed match.