Find · understand · compare
7217 bearing dimensions & suffix variants
Look up recorded dimensions for designations beginning with 7217. The table retains complete manufacturer designations so special suffixes and different dimensional variants remain visible.
On this page5 sections ⌄
Find by measured dimensions
Enter bore d, outside diameter D and width B. Use decimals or inch fractions such as 1/2 or 1 1/4.
7217 dimensions and recorded technical data
The recorded 7217 base designation measures 85×150×28 mm (inside diameter d × outside diameter D × width B). This answer uses unsuffixed records from KOYO. It does not assign the same dimensions or operating ratings to every suffix.
The numeric series boundary is preserved: a longer number is not included merely because its first digits match. 77 recorded variants are listed. A dash means the value is missing, not zero.
No recorded variant matches these filters. Clear a filter to see other records; no substitute has been inferred.
| Brand / full designation | Named dimensions (mm / in) | Dynamic C (kN) | Static C0 (kN) | Reference speed (rpm) | Limiting speed (rpm) | Mass (kg / g) |
|---|---|---|---|---|---|---|
| KOYO7217Angular contact ball bearing |
| 129 kN | 89.2 kN | — | 4000 rpmLimiting Speeds(Grease Lub.): 4000 min-1Limiting Speeds(Oil Lub.): 5000 min-1 | 1.87 kg1870 g |
| SKF7217 ACDGA/P4ASuper-precision, high-capacity, universally matchable single row angular contact ball bearing |
| 95.6 kN | 85 kN | — | — | 1.82 kg1820 g |
| SKF7217 ACDGB/P4ASuper-precision, high-capacity, universally matchable single row angular contact ball bearing |
| 95.6 kN | 85 kN | — | — | 1.82 kg1820 g |
| SKF7217 ACDGC/P4ASuper-precision, high-capacity, universally matchable single row angular contact ball bearing |
| 95.6 kN | 85 kN | — | — | 1.82 kg1820 g |
| SKF7217 ACD/HCP4ADBCMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings |
| 156 kN | 170 kN | — | — | 3.09 kg3090 g |
| SKF7217 ACD/HCP4ADGAMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings |
| 156 kN | 170 kN | — | — | 3.09 kg3090 g |
| SKF7217 ACD/HCP4AQGAMatched set of four super-precision, high-capacity, D design, single row angular contact ball bearings |
| 251 kN | 340 kN | — | — | 6.16 kg6160 g |
| SKF7217 ACD/P4ASuper-precision, high-capacity, single row angular contact ball bearing |
| 95.6 kN | 85 kN | — | — | 1.82 kg1820 g |
| SKF7217 ACD/P4ADBAMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings |
| 156 kN | 170 kN | — | — | 3.65 kg3650 g |
| SKF7217 ACD/P4ADBBMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings |
| 156 kN | 170 kN | — | — | 3.65 kg3650 g |
| SKF7217 ACD/P4ADGAMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings |
| 156 kN | 170 kN | — | — | 3.65 kg3650 g |
| SKF7217 ACD/P4ADGBMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings |
| 156 kN | 170 kN | — | — | 3.65 kg3650 g |
| SKF7217 ACD/P4ADGCMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings |
| 156 kN | 170 kN | — | — | 3.65 kg3650 g |
| SKF7217 ACD/P4ADGDMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings |
| 156 kN | 170 kN | — | — | 3.65 kg3650 g |
| SKF7217 ACD/P4ATBTCMatched set of three super-precision, high-capacity, D design, single row angular contact ball bearings |
| 208 kN | 255 kN | — | — | 5.49 kg5490 g |
| SKF7217 BECBJSingle row angular contact ball bearing |
| 102 kN | 90 kN | 5300 rpm | 5300 rpm | 1.9 kg1900 g |
| SKF7217 BECBMSingle row angular contact ball bearing |
| 102 kN | 90 kN | 5300 rpm | 7000 rpm | 1.98 kg1980 g |
| SKF7217 BECBPSingle row angular contact ball bearing |
| 102 kN | 90 kN | 5300 rpm | 5300 rpm | 1.79 kg1790 g |
| SKF7217 BECBYSingle row angular contact ball bearing |
| 102 kN | 90 kN | 5300 rpm | 5300 rpm | 1.83 kg1830 g |
| SKF7217 BEGAFSingle row angular contact ball bearing |
| 95.6 kN | 83 kN | 5300 rpm | 5000 rpm | 1.99 kg1990 g |
| SKF7217 BEGAPSingle row angular contact ball bearing |
| 102 kN | 90 kN | 5300 rpm | 5300 rpm | 1.79 kg1790 g |
| SKF7217 BEPSingle row angular contact ball bearing |
| 95.6 kN | 83 kN | 5300 rpm | 5000 rpm | 1.79 kg1790 g |
| SKF7217 CDGA/HCP4ASuper-precision, high-capacity, universally matchable single row angular contact ball bearing |
| 99.5 kN | 88 kN | — | — | 1.54 kg1540 g |
| SKF7217 CDGA/P4ASuper-precision, high-capacity, universally matchable single row angular contact ball bearing |
| 99.5 kN | 88 kN | — | — | 1.82 kg1820 g |
| SKF7217 CDGB/P4ASuper-precision, high-capacity, universally matchable single row angular contact ball bearing |
| 99.5 kN | 88 kN | — | — | 1.82 kg1820 g |
| SKF7217 CDGC/P4ASuper-precision, high-capacity, universally matchable single row angular contact ball bearing |
| 99.5 kN | 88 kN | — | — | 1.82 kg1820 g |
| SKF7217 CD/P4ASuper-precision, high-capacity, single row angular contact ball bearing |
| 99.5 kN | 88 kN | — | — | 1.82 kg1820 g |
| SKF7217 CD/P4ADGAMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings |
| 163 kN | 176 kN | — | — | 3.65 kg3650 g |
| SKF7217 CD/P4ADGBMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings |
| 163 kN | 176 kN | — | — | 3.65 kg3650 g |
| SKF7217 CD/P4AQBCDMatched set of four super-precision, high-capacity, D design, single row angular contact ball bearings |
| 265 kN | 355 kN | — | — | 7.3 kg7300 g |
| FAG7217-B-XL-JPAngular contact ball bearing |
| 97 kN | 86 kN | 4750 rpm | 5900 rpm | 1.866 kg1866 g |
| FAG7217-B-XL-JP-UAAngular contact ball bearing |
| 97 kN | 86 kN | 4750 rpm | 5900 rpm | 1.871 kg1871 g |
| FAG7217-B-XL-JP-UOAngular contact ball bearing |
| 97 kN | 86 kN | 4750 rpm | 5900 rpm | 1.868 kg1868 g |
| FAG7217-B-XL-MPAngular contact ball bearing |
| 93 kN | 81 kN | 4800 rpm | 7700 rpm | 2 kg2000 g |
| FAG7217-B-XL-MP-S1-UAAngular contact ball bearing |
| 93 kN | 81 kN | 4800 rpm | 7700 rpm | 2 kg2000 g |
| FAG7217-B-XL-MP-UAAngular contact ball bearing |
| 93 kN | 81 kN | 4800 rpm | 7700 rpm | 2 kg2000 g |
| FAG7217-B-XL-MP-UBAngular contact ball bearing |
| 93 kN | 81 kN | 4800 rpm | 7700 rpm | 2 kg2000 g |
| FAG7217-B-XL-MP-UOAngular contact ball bearing |
| 93 kN | 81 kN | 4800 rpm | 7700 rpm | 2 kg2000 g |
| FAG7217-B-XL-TVPAngular contact ball bearing |
| 97 kN | 86 kN | 4750 rpm | 5900 rpm | 1.805 kg1805 g |
| FAG7217-B-XL-TVP-P5Angular contact ball bearing |
| 97 kN | 86 kN | 4750 rpm | 5900 rpm | 1.805 kg1805 g |
| FAG7217-B-XL-TVP-P5-UOAngular contact ball bearing |
| 97 kN | 86 kN | 4750 rpm | 5900 rpm | 1.9 kg1900 g |
| FAG7217-B-XL-TVP-UAAngular contact ball bearing |
| 97 kN | 86 kN | 4750 rpm | 5900 rpm | 1.855 kg1855 g |
| FAG7217-B-XL-TVP-UBAngular contact ball bearing |
| 97 kN | 86 kN | 4750 rpm | 5900 rpm | 1.9 kg1900 g |
| FAG7217-B-XL-TVP-UOAngular contact ball bearing |
| 97 kN | 86 kN | 4750 rpm | 5900 rpm | 1.806 kg1806 g |
| TIMKEN7217WNAngular contact ball bearing |
| 93 kN | 81 kN | — | — | 1.86 kg1860 g |
| NSK7217AWAngular contact ball bearing |
| 113 kN | 89 kN | — | — | 1.83 kg1830 g |
| NSK7217AWDBAngular contact ball bearing |
| 184 kN | 178 kN | — | — | — |
| NSK7217AWDFAngular contact ball bearing |
| 184 kN | 178 kN | — | — | — |
| NSK7217AWDTAngular contact ball bearing |
| 184 kN | 178 kN | — | — | — |
| NSK7217BEAT85Angular contact ball bearing |
| 106 kN | 81.5 kN | — | — | 1.75 kg1750 g |
| NSK7217BWAngular contact ball bearing |
| 102 kN | 81 kN | — | — | 1.87 kg1870 g |
| NSK7217BWDBAngular contact ball bearing |
| 166 kN | 162 kN | — | — | — |
| NSK7217BWDFAngular contact ball bearing |
| 166 kN | 162 kN | — | — | — |
| NSK7217BWDTAngular contact ball bearing |
| 166 kN | 162 kN | — | — | — |
| KOYO7217BAngular contact ball bearing |
| 116 kN | 81.1 kN | — | 3000 rpmLimiting Speeds(Grease Lub.): 3000 min-1Limiting Speeds(Oil Lub.): 4000 min-1 | 1.87 kg1870 g |
| KOYO7217BDBAngular contact ball bearing |
| 189 kN | 162 kN | — | 2400 rpmLimiting Speeds(Grease Lub.): 2400 min-1Limiting Speeds(Oil Lub.): 3200 min-1 | 3.74 kg3740 g |
| KOYO7217BDB FYAngular contact ball bearing |
| 181 kN | 152 kN | — | 3000 rpmLimiting Speeds(Grease Lub.): 3000 min-1Limiting Speeds(Oil Lub.): 4000 min-1 | 3.74 kg3740 g |
| KOYO7217BDFAngular contact ball bearing |
| 189 kN | 162 kN | — | 2400 rpmLimiting Speeds(Grease Lub.): 2400 min-1Limiting Speeds(Oil Lub.): 3200 min-1 | 3.74 kg3740 g |
| KOYO7217BDF FYAngular contact ball bearing |
| 181 kN | 152 kN | — | 3000 rpmLimiting Speeds(Grease Lub.): 3000 min-1Limiting Speeds(Oil Lub.): 4000 min-1 | 3.74 kg3740 g |
| KOYO7217BDTAngular contact ball bearing |
| 189 kN | 162 kN | — | 2400 rpmLimiting Speeds(Grease Lub.): 2400 min-1Limiting Speeds(Oil Lub.): 3200 min-1 | 3.74 kg3740 g |
| KOYO7217BDT FYAngular contact ball bearing |
| 181 kN | 152 kN | — | 3000 rpmLimiting Speeds(Grease Lub.): 3000 min-1Limiting Speeds(Oil Lub.): 4000 min-1 | 3.74 kg3740 g |
| KOYO7217B FYAngular contact ball bearing |
| 111 kN | 76 kN | — | 3800 rpmLimiting Speeds(Grease Lub.): 3800 min-1Limiting Speeds(Oil Lub.): 5000 min-1 | 1.87 kg1870 g |
| KOYO7217CAngular contact ball bearing |
| 140 kN | 96.6 kN | — | 5600 rpmLimiting Speeds(Grease Lub.): 5600 min-1Limiting Speeds(Oil Lub.): 7300 min-1 | 1.87 kg1870 g |
| KOYO7217CDBAngular contact ball bearing |
| 227 kN | 193 kN | — | 4400 rpmLimiting Speeds(Grease Lub.): 4400 min-1Limiting Speeds(Oil Lub.): 5900 min-1 | 3.74 kg3740 g |
| KOYO7217CDB FYAngular contact ball bearing |
| 218 kN | 181 kN | — | 5500 rpmLimiting Speeds(Grease Lub.): 5500 min-1Limiting Speeds(Oil Lub.): 7400 min-1 | 3.74 kg3740 g |
| KOYO7217CDFAngular contact ball bearing |
| 227 kN | 193 kN | — | 4400 rpmLimiting Speeds(Grease Lub.): 4400 min-1Limiting Speeds(Oil Lub.): 5900 min-1 | 3.74 kg3740 g |
| KOYO7217CDF FYAngular contact ball bearing |
| 218 kN | 181 kN | — | 5500 rpmLimiting Speeds(Grease Lub.): 5500 min-1Limiting Speeds(Oil Lub.): 7400 min-1 | 3.74 kg3740 g |
| KOYO7217CDTAngular contact ball bearing |
| 227 kN | 193 kN | — | 4400 rpmLimiting Speeds(Grease Lub.): 4400 min-1Limiting Speeds(Oil Lub.): 5900 min-1 | 3.74 kg3740 g |
| KOYO7217CDT FYAngular contact ball bearing |
| 218 kN | 181 kN | — | 5500 rpmLimiting Speeds(Grease Lub.): 5500 min-1Limiting Speeds(Oil Lub.): 7400 min-1 | 3.74 kg3740 g |
| KOYO7217C FYAngular contact ball bearing |
| 134 kN | 90.6 kN | — | 7000 rpmLimiting Speeds(Grease Lub.): 7000 min-1Limiting Speeds(Oil Lub.): 9200 min-1 | 1.87 kg1870 g |
| KOYO7217DBAngular contact ball bearing |
| 209 kN | 178 kN | — | 3200 rpmLimiting Speeds(Grease Lub.): 3200 min-1Limiting Speeds(Oil Lub.): 4000 min-1 | 3.74 kg3740 g |
| KOYO7217DB FYAngular contact ball bearing |
| 200 kN | 167 kN | — | 4000 rpmLimiting Speeds(Grease Lub.): 4000 min-1Limiting Speeds(Oil Lub.): 5000 min-1 | 3.74 kg3740 g |
| KOYO7217DFAngular contact ball bearing |
| 209 kN | 178 kN | — | 3200 rpmLimiting Speeds(Grease Lub.): 3200 min-1Limiting Speeds(Oil Lub.): 4000 min-1 | 3.74 kg3740 g |
| KOYO7217DF FYAngular contact ball bearing |
| 200 kN | 167 kN | — | 4000 rpmLimiting Speeds(Grease Lub.): 4000 min-1Limiting Speeds(Oil Lub.): 5000 min-1 | 3.74 kg3740 g |
| KOYO7217DTAngular contact ball bearing |
| 209 kN | 178 kN | — | 3200 rpmLimiting Speeds(Grease Lub.): 3200 min-1Limiting Speeds(Oil Lub.): 4000 min-1 | 3.74 kg3740 g |
| KOYO7217DT FYAngular contact ball bearing |
| 200 kN | 167 kN | — | 4000 rpmLimiting Speeds(Grease Lub.): 4000 min-1Limiting Speeds(Oil Lub.): 5000 min-1 | 3.74 kg3740 g |
| KOYO7217 FYAngular contact ball bearing |
| 123 kN | 83.6 kN | — | 5000 rpmLimiting Speeds(Grease Lub.): 5000 min-1Limiting Speeds(Oil Lub.): 6300 min-1 | 1.87 kg1870 g |
Compare recorded seals, clearance, precision and materials
Manufacturer wording is retained. A missing property is not inferred from another brand or a similar suffix.
| Brand / designation | Closure | Original precision | Clearance | Cage | Material | Lubricant |
|---|---|---|---|---|---|---|
| KOYO 7217 | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| SKF 7217 ACDGA/P4A | Without | Not recorded | Not recorded | Not recorded | Bearing steel | None |
| SKF 7217 ACDGB/P4A | Without | Not recorded | Not recorded | Not recorded | Bearing steel | None |
| SKF 7217 ACDGC/P4A | Without | Not recorded | Not recorded | Not recorded | Bearing steel | None |
| SKF 7217 ACD/HCP4ADBC | Without | Not recorded | Not recorded | Not recorded | Hybrid (ceramic balls) | None |
| SKF 7217 ACD/HCP4ADGA | Without | Not recorded | Not recorded | Not recorded | Hybrid (ceramic balls) | None |
| SKF 7217 ACD/HCP4AQGA | Without | Not recorded | Not recorded | Not recorded | Hybrid (ceramic balls) | None |
| SKF 7217 ACD/P4A | Without | Not recorded | Not recorded | Not recorded | Bearing steel | None |
| SKF 7217 ACD/P4ADBA | Without | Not recorded | Not recorded | Not recorded | Bearing steel | None |
| SKF 7217 ACD/P4ADBB | Without | Not recorded | Not recorded | Not recorded | Bearing steel | None |
| SKF 7217 ACD/P4ADGA | Without | Not recorded | Not recorded | Not recorded | Bearing steel | None |
| SKF 7217 ACD/P4ADGB | Without | Not recorded | Not recorded | Not recorded | Bearing steel | None |
| SKF 7217 ACD/P4ADGC | Without | Not recorded | Not recorded | Not recorded | Bearing steel | None |
| SKF 7217 ACD/P4ADGD | Without | Not recorded | Not recorded | Not recorded | Bearing steel | None |
| SKF 7217 ACD/P4ATBTC | Without | Not recorded | Not recorded | Not recorded | Bearing steel | None |
| SKF 7217 BECBJ | Without | P6 | Not recorded | Steel sheet metal | Bearing steel | None |
| SKF 7217 BECBM | Without | P6 | Not recorded | Machined brass | Bearing steel | None |
| SKF 7217 BECBP | Without | P6 | Not recorded | Non-metallic | Bearing steel | None |
| SKF 7217 BECBY | Without | P6 | Not recorded | Brass sheet metal | Bearing steel | None |
| SKF 7217 BEGAF | Without | P6 | Not recorded | Machined steel | Bearing steel | None |
| SKF 7217 BEGAP | Without | P6 | Not recorded | Non-metallic | Bearing steel | None |
| SKF 7217 BEP | Without | Normal | Not recorded | Non-metallic | Bearing steel | None |
| SKF 7217 CDGA/HCP4A | Without | Not recorded | Not recorded | Not recorded | Hybrid (ceramic balls) | None |
| SKF 7217 CDGA/P4A | Without | Not recorded | Not recorded | Not recorded | Bearing steel | None |
| SKF 7217 CDGB/P4A | Without | Not recorded | Not recorded | Not recorded | Bearing steel | None |
| SKF 7217 CDGC/P4A | Without | Not recorded | Not recorded | Not recorded | Bearing steel | None |
| SKF 7217 CD/P4A | Without | Not recorded | Not recorded | Not recorded | Bearing steel | None |
| SKF 7217 CD/P4ADGA | Without | Not recorded | Not recorded | Not recorded | Bearing steel | None |
| SKF 7217 CD/P4ADGB | Without | Not recorded | Not recorded | Not recorded | Bearing steel | None |
| SKF 7217 CD/P4AQBCD | Without | Not recorded | Not recorded | Not recorded | Bearing steel | None |
| FAG 7217-B-XL-JP | Without — Not sealed | PN — Normal (ISO 492:2023) | Not recorded | JP — Steel sheet metal | Not recorded | Without — Bearing not greased |
| FAG 7217-B-XL-JP-UA | Without — Not sealed | PN — Normal (ISO 492:2023) | Not recorded | JP — Steel sheet metal | Not recorded | Without — Bearing not greased |
| FAG 7217-B-XL-JP-UO | Without — Not sealed | PN — Normal (ISO 492:2023) | Not recorded | JP — Steel sheet metal | Not recorded | Without — Bearing not greased |
| FAG 7217-B-XL-MP | Without — Not sealed | PN — Normal (ISO 492:2023) | Not recorded | MP — Solid brass cage, ball guided | Not recorded | Without — Bearing not greased |
| FAG 7217-B-XL-MP-S1-UA | Without — Not sealed | PN — Normal (ISO 492:2023) | Not recorded | MP — Solid brass cage, ball guided | Not recorded | Without — Bearing not greased |
| FAG 7217-B-XL-MP-UA | Without — Not sealed | PN — Normal (ISO 492:2023) | Not recorded | MP — Solid brass cage, ball guided | Not recorded | Without — Bearing not greased |
| FAG 7217-B-XL-MP-UB | Without — Not sealed | PN — Normal (ISO 492:2023) | Not recorded | MP — Solid brass cage, ball guided | Not recorded | Without — Bearing not greased |
| FAG 7217-B-XL-MP-UO | Without — Not sealed | PN — Normal (ISO 492:2023) | Not recorded | MP — Solid brass cage, ball guided | Not recorded | Without — Bearing not greased |
| FAG 7217-B-XL-TVP | Without — Not sealed | PN — Normal (ISO 492:2023) | Not recorded | TVP — Solid cage made of glass-fiber reinforced polyamid PA66 | Not recorded | Without — Bearing not greased |
| FAG 7217-B-XL-TVP-P5 | Without — Not sealed | P5 — Class 5 (ISO 492:2023) | Not recorded | TVP — Solid cage made of glass-fiber reinforced polyamid PA66 | Not recorded | Without — Bearing not greased |
| FAG 7217-B-XL-TVP-P5-UO | Without — Not sealed | P5 — Class 5 (ISO 492:2023) | Not recorded | TVP — Solid cage made of glass-fiber reinforced polyamid PA66 | Not recorded | Without — Bearing not greased |
| FAG 7217-B-XL-TVP-UA | Without — Not sealed | PN — Normal (ISO 492:2023) | Not recorded | TVP — Solid cage made of glass-fiber reinforced polyamid PA66 | Not recorded | Without — Bearing not greased |
| FAG 7217-B-XL-TVP-UB | Without — Not sealed | PN — Normal (ISO 492:2023) | Not recorded | TVP — Solid cage made of glass-fiber reinforced polyamid PA66 | Not recorded | Without — Bearing not greased |
| FAG 7217-B-XL-TVP-UO | Without — Not sealed | PN — Normal (ISO 492:2023) | Not recorded | TVP — Solid cage made of glass-fiber reinforced polyamid PA66 | Not recorded | Without — Bearing not greased |
| TIMKEN 7217WN | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| NSK 7217AW | Not recorded | Not recorded | Not recorded | Pressed steel | Not recorded | Not recorded |
| NSK 7217AWDB | Not recorded | Not recorded | Not recorded | Pressed steel | Not recorded | Not recorded |
| NSK 7217AWDF | Not recorded | Not recorded | Not recorded | Pressed steel | Not recorded | Not recorded |
| NSK 7217AWDT | Not recorded | Not recorded | Not recorded | Pressed steel | Not recorded | Not recorded |
| NSK 7217BEAT85 | Not recorded | Not recorded | Not recorded | Polyamide 46 resin | Not recorded | Not recorded |
| NSK 7217BW | Not recorded | Not recorded | Not recorded | Pressed steel | Not recorded | Not recorded |
| NSK 7217BWDB | Not recorded | Not recorded | Not recorded | Pressed steel | Not recorded | Not recorded |
| NSK 7217BWDF | Not recorded | Not recorded | Not recorded | Pressed steel | Not recorded | Not recorded |
| NSK 7217BWDT | Not recorded | Not recorded | Not recorded | Pressed steel | Not recorded | Not recorded |
| KOYO 7217B | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 7217BDB | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 7217BDB FY | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 7217BDF | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 7217BDF FY | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 7217BDT | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 7217BDT FY | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 7217B FY | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 7217C | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 7217CDB | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 7217CDB FY | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 7217CDF | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 7217CDF FY | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 7217CDT | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 7217CDT FY | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 7217C FY | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 7217DB | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 7217DB FY | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 7217DF | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 7217DF FY | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 7217DT | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 7217DT FY | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 7217 FY | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
How to compare these values
- Use the displayed dimension names and original symbols. Housing length L, height H2 and flange width are not bearing outside diameter D. A catalogue width with an unverified symbol must not be assumed to be inner-ring width B or assembly width T. Open the product record for mounting dimensions and geometry.
- Inch values are calculated from the recorded millimetres using 25.4 mm per inch, rounded to six decimal places. They do not change a metric bearing into an inch-series bearing. Gram values are converted from the recorded mass in kilograms.
- C and C0 describe different rating conditions. They are not a single safe working-load limit and cannot replace an application load calculation.
- Reference and limiting speeds are separate catalogue values. The source grease/oil context is shown where recorded. Lubricant, seals, loads, fit, clearance and cooling affect the usable operating speed.
- A common base number does not prove equivalent seals, clearance, precision, material or interchangeability. Open the full designation for these fields.
Related prefix matches — other model numbers may appear
These discovery results can contain a longer number or a different component. They are not specifications for the requested exact model. Open the complete product to inspect its original geometry.
KOYO
7217
Angular contact ball bearing
View full technical record →SKF7217 ACDGA/P4A
Super-precision, high-capacity, universally matchable single row angular contact ball bearing
View full technical record →SKF7217 ACDGB/P4A
Super-precision, high-capacity, universally matchable single row angular contact ball bearing
View full technical record →SKF7217 ACDGC/P4A
Super-precision, high-capacity, universally matchable single row angular contact ball bearing
View full technical record →SKF7217 ACD/HCP4ADBC
Matched set of two super-precision, high-capacity, D design, single row angular contact ball bearings
View full technical record →SKF7217 ACD/HCP4ADGA
Matched set of two super-precision, high-capacity, D design, single row angular contact ball bearings
View full technical record →SKF7217 ACD/HCP4AQGA
Matched set of four super-precision, high-capacity, D design, single row angular contact ball bearings
View full technical record →SKF7217 ACD/P4A
Super-precision, high-capacity, single row angular contact ball bearing
View full technical record →SKF7217 ACD/P4ADBA
Matched set of two super-precision, high-capacity, D design, single row angular contact ball bearings
View full technical record →SKF7217 ACD/P4ADBB
Matched set of two super-precision, high-capacity, D design, single row angular contact ball bearings
View full technical record →SKF7217 ACD/P4ADGA
Matched set of two super-precision, high-capacity, D design, single row angular contact ball bearings
View full technical record →SKF7217 ACD/P4ADGB
Matched set of two super-precision, high-capacity, D design, single row angular contact ball bearings
View full technical record →Check the drawing before substituting
Nominal dimensions are not shaft-fit tolerances. Different variants can add grooves, flanges, wider rings or assembly components. When the table has different dimensions, the complete designation—not the shared prefix—controls.
Reference basis & data limits
Manufacturer terminology is retained in the product records. Technical reference basis: JTEKT Basic Bearing Knowledge (boundary dimensions, tolerance classes and lubrication); NSK Bearing ABCs (lubrication, designations and clearance); NTN technical FAQs (closure codes and component interchange); SKF rolling-bearing selection and maintenance references.
Selection workflows and catalogue grouping are BearingScope editorial aids. Verify the current drawing and application requirements before using a candidate. Missing database information is not converted into an assumed match.