99,016 bearing records · search, filter and compare

info@bearingscope.com
Find · understand · compare

7216 bearing dimensions & suffix variants

Look up recorded dimensions for designations beginning with 7216. The table retains complete manufacturer designations so special suffixes and different dimensional variants remain visible.

On this page5 sections

Find by measured dimensions

Enter bore d, outside diameter D and width B. Use decimals or inch fractions such as 1/2 or 1 1/4.

For tapered assemblies use total width T; for units or flanged bearings also check the mounting drawing.

Exact model evidence

7216 dimensions and recorded technical data

The recorded 7216 base designation measures 80×140×26 mm (inside diameter d × outside diameter D × width B). This answer uses unsuffixed records from KOYO. It does not assign the same dimensions or operating ratings to every suffix.

The numeric series boundary is preserved: a longer number is not included merely because its first digits match. 90 recorded variants are listed. A dash means the value is missing, not zero.

Brand / full designationNamed dimensions (mm / in)Dynamic C (kN)Static C0 (kN)Reference speed (rpm)Limiting speed (rpm)Mass (kg / g)
KOYO7216Angular contact ball bearing
Bore diameter (d)
80 mm
3.149606 in
Outside diameter (D)
140 mm
5.511811 in
Width (B)
26 mm
1.023622 in
111 kN76.2 kN—4300 rpmLimiting Speeds(Grease Lub.): 4300 min-1Limiting Speeds(Oil Lub.): 5300 min-11.5 kg1500 g
SKF7216 ACDGA/P4ASuper-precision, high-capacity, universally matchable single row angular contact ball bearing
Bore diameter (d)
80 mm
3.149606 in
Outside diameter (D)
140 mm
5.511811 in
Width (B)
26 mm
1.023622 in
81.9 kN72 kN——1.46 kg1460 g
SKF7216 ACDGB/HCP4ASuper-precision, high-capacity, universally matchable single row angular contact ball bearing
Bore diameter (d)
80 mm
3.149606 in
Outside diameter (D)
140 mm
5.511811 in
Width (B)
26 mm
1.023622 in
81.9 kN72 kN——1.24 kg1240 g
SKF7216 ACDGB/P4ASuper-precision, high-capacity, universally matchable single row angular contact ball bearing
Bore diameter (d)
80 mm
3.149606 in
Outside diameter (D)
140 mm
5.511811 in
Width (B)
26 mm
1.023622 in
81.9 kN72 kN——1.46 kg1460 g
SKF7216 ACDGC/P4ASuper-precision, high-capacity, universally matchable single row angular contact ball bearing
Bore diameter (d)
80 mm
3.149606 in
Outside diameter (D)
140 mm
5.511811 in
Width (B)
26 mm
1.023622 in
81.9 kN72 kN——1.46 kg1460 g
SKF7216 ACD/HCP4ASuper-precision, high-capacity, single row angular contact ball bearing
Bore diameter (d)
80 mm
3.149606 in
Outside diameter (D)
140 mm
5.511811 in
Width (B)
26 mm
1.023622 in
81.9 kN72 kN——1.24 kg1240 g
SKF7216 ACD/HCP4ADGAMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
80 mm
3.149606 in
Outside diameter (D)
140 mm
5.511811 in
Width (B)
52 mm
2.047244 in
133 kN143 kN——2.45 kg2450 g
SKF7216 ACD/P4ASuper-precision, high-capacity, single row angular contact ball bearing
Bore diameter (d)
80 mm
3.149606 in
Outside diameter (D)
140 mm
5.511811 in
Width (B)
26 mm
1.023622 in
81.9 kN72 kN——1.46 kg1460 g
SKF7216 ACD/P4ADBAMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
80 mm
3.149606 in
Outside diameter (D)
140 mm
5.511811 in
Width (B)
52 mm
2.047244 in
133 kN143 kN——2.92 kg2920 g
SKF7216 ACD/P4ADBBMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
80 mm
3.149606 in
Outside diameter (D)
140 mm
5.511811 in
Width (B)
52 mm
2.047244 in
133 kN143 kN——2.92 kg2920 g
SKF7216 ACD/P4ADBCMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
80 mm
3.149606 in
Outside diameter (D)
140 mm
5.511811 in
Width (B)
52 mm
2.047244 in
133 kN143 kN——2.92 kg2920 g
SKF7216 ACD/P4ADGAMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
80 mm
3.149606 in
Outside diameter (D)
140 mm
5.511811 in
Width (B)
52 mm
2.047244 in
133 kN143 kN——2.92 kg2920 g
SKF7216 ACD/P4ADGBMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
80 mm
3.149606 in
Outside diameter (D)
140 mm
5.511811 in
Width (B)
52 mm
2.047244 in
133 kN143 kN——2.92 kg2920 g
SKF7216 ACD/P4ATBTBMatched set of three super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
80 mm
3.149606 in
Outside diameter (D)
140 mm
5.511811 in
Width (B)
78 mm
3.070866 in
174 kN216 kN——4.37 kg4370 g
SKF7216 ACD/P4ATBTCMatched set of three super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
80 mm
3.149606 in
Outside diameter (D)
140 mm
5.511811 in
Width (B)
78 mm
3.070866 in
174 kN216 kN——4.37 kg4370 g
SKF7216 BECBJSingle row angular contact ball bearing
Bore diameter (d)
80 mm
3.149606 in
Outside diameter (D)
140 mm
5.511811 in
Width (B)
26 mm
1.023622 in
85 kN75 kN5600 rpm5600 rpm1.49 kg1490 g
SKF7216 BECBMSingle row angular contact ball bearing
Bore diameter (d)
80 mm
3.149606 in
Outside diameter (D)
140 mm
5.511811 in
Width (B)
26 mm
1.023622 in
85 kN75 kN5600 rpm7500 rpm1.54 kg1540 g
SKF7216 BECBPSingle row angular contact ball bearing
Bore diameter (d)
80 mm
3.149606 in
Outside diameter (D)
140 mm
5.511811 in
Width (B)
26 mm
1.023622 in
85 kN75 kN5600 rpm5600 rpm1.41 kg1410 g
SKF7216 BECBYSingle row angular contact ball bearing
Bore diameter (d)
80 mm
3.149606 in
Outside diameter (D)
140 mm
5.511811 in
Width (B)
26 mm
1.023622 in
85 kN75 kN5600 rpm5600 rpm1.49 kg1490 g
SKF7216 BECBY/W64Single row angular contact ball bearing
Recorded bore (d)
80 mm
3.149606 in
Recorded outside dimension (D)
140 mm
5.511811 in
Catalogue width (symbol unverified)
26 mm
1.023622 in
80.6 kN69.5 kN—1300 rpm1.58 kg1580 g
SKF7216 BEGAFSingle row angular contact ball bearing
Bore diameter (d)
80 mm
3.149606 in
Outside diameter (D)
140 mm
5.511811 in
Width (B)
26 mm
1.023622 in
80.6 kN69.5 kN5600 rpm5300 rpm1.57 kg1570 g
SKF7216 BEGAMSingle row angular contact ball bearing
Bore diameter (d)
80 mm
3.149606 in
Outside diameter (D)
140 mm
5.511811 in
Width (B)
26 mm
1.023622 in
85 kN75 kN5600 rpm7500 rpm1.54 kg1540 g
SKF7216 BEGAPSingle row angular contact ball bearing
Bore diameter (d)
80 mm
3.149606 in
Outside diameter (D)
140 mm
5.511811 in
Width (B)
26 mm
1.023622 in
85 kN75 kN5600 rpm5600 rpm1.41 kg1410 g
SKF7216 BEGAPHSingle row angular contact ball bearing
Bore diameter (d)
80 mm
3.149606 in
Outside diameter (D)
140 mm
5.511811 in
Width (B)
26 mm
1.023622 in
85 kN75 kN5600 rpm5600 rpm1.41 kg1410 g
SKF7216 BEPSingle row angular contact ball bearing
Bore diameter (d)
80 mm
3.149606 in
Outside diameter (D)
140 mm
5.511811 in
Width (B)
26 mm
1.023622 in
80.6 kN69.5 kN5600 rpm5300 rpm1.41 kg1410 g
SKF7216 CDGA/HCP4ASuper-precision, high-capacity, universally matchable single row angular contact ball bearing
Bore diameter (d)
80 mm
3.149606 in
Outside diameter (D)
140 mm
5.511811 in
Width (B)
26 mm
1.023622 in
85.2 kN75 kN——1.24 kg1240 g
SKF7216 CDGA/P4ASuper-precision, high-capacity, universally matchable single row angular contact ball bearing
Bore diameter (d)
80 mm
3.149606 in
Outside diameter (D)
140 mm
5.511811 in
Width (B)
26 mm
1.023622 in
85.2 kN75 kN——1.46 kg1460 g
SKF7216 CDGB/P4ASuper-precision, high-capacity, universally matchable single row angular contact ball bearing
Bore diameter (d)
80 mm
3.149606 in
Outside diameter (D)
140 mm
5.511811 in
Width (B)
26 mm
1.023622 in
85.2 kN75 kN——1.46 kg1460 g
SKF7216 CDGD/P4ASuper-precision, high-capacity, universally matchable single row angular contact ball bearing
Bore diameter (d)
80 mm
3.149606 in
Outside diameter (D)
140 mm
5.511811 in
Width (B)
26 mm
1.023622 in
85.2 kN75 kN——1.46 kg1460 g
SKF7216 CD/HCP4ADGAMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
80 mm
3.149606 in
Outside diameter (D)
140 mm
5.511811 in
Width (B)
52 mm
2.047244 in
140 kN150 kN——2.48 kg2480 g
SKF7216 CD/HCP4AQBCDMatched set of four super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
80 mm
3.149606 in
Outside diameter (D)
140 mm
5.511811 in
Width (B)
104 mm
4.094488 in
225 kN300 kN——4.91 kg4910 g
SKF7216 CD/P4ASuper-precision, high-capacity, single row angular contact ball bearing
Bore diameter (d)
80 mm
3.149606 in
Outside diameter (D)
140 mm
5.511811 in
Width (B)
26 mm
1.023622 in
85.2 kN75 kN——1.46 kg1460 g
SKF7216 CD/P4ADBAMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
80 mm
3.149606 in
Outside diameter (D)
140 mm
5.511811 in
Width (B)
52 mm
2.047244 in
140 kN150 kN——2.92 kg2920 g
SKF7216 CD/P4ADBCMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
80 mm
3.149606 in
Outside diameter (D)
140 mm
5.511811 in
Width (B)
52 mm
2.047244 in
140 kN150 kN——2.92 kg2920 g
SKF7216 CD/P4ADFAMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
80 mm
3.149606 in
Outside diameter (D)
140 mm
5.511811 in
Width (B)
52 mm
2.047244 in
140 kN150 kN——2.92 kg2920 g
SKF7216 CD/P4ADFBMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
80 mm
3.149606 in
Outside diameter (D)
140 mm
5.511811 in
Width (B)
52 mm
2.047244 in
140 kN150 kN——2.92 kg2920 g
SKF7216 CD/P4ADGAMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
80 mm
3.149606 in
Outside diameter (D)
140 mm
5.511811 in
Width (B)
52 mm
2.047244 in
140 kN150 kN——2.92 kg2920 g
SKF7216 CD/P4ADGBMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
80 mm
3.149606 in
Outside diameter (D)
140 mm
5.511811 in
Width (B)
52 mm
2.047244 in
140 kN150 kN——2.92 kg2920 g
SKF7216 CD/P4ADGCMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
80 mm
3.149606 in
Outside diameter (D)
140 mm
5.511811 in
Width (B)
52 mm
2.047244 in
140 kN150 kN——2.92 kg2920 g
SKF7216 CD/P4ADGDMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
80 mm
3.149606 in
Outside diameter (D)
140 mm
5.511811 in
Width (B)
52 mm
2.047244 in
140 kN150 kN——2.92 kg2920 g
SKF7216 CD/P4AQBCBMatched set of four super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
80 mm
3.149606 in
Outside diameter (D)
140 mm
5.511811 in
Width (B)
104 mm
4.094488 in
225 kN300 kN——5.83 kg5830 g
FAG7216-B-XL-FP-UOAngular contact ball bearing
Bore diameter (d)
80 mm
3.149606 in
Outside diameter (D)
140 mm
5.511811 in
Width (B)
26 mm
1.023622 in
85 kN72 kN4950 rpm6400 rpm1.62 kg1620 g
FAG7216-B-XL-JPAngular contact ball bearing
Bore diameter (d)
80 mm
3.149606 in
Outside diameter (D)
140 mm
5.511811 in
Width (B)
26 mm
1.023622 in
85 kN72 kN4950 rpm6400 rpm1.473 kg1473 g
FAG7216-B-XL-JP-UAAngular contact ball bearing
Bore diameter (d)
80 mm
3.149606 in
Outside diameter (D)
140 mm
5.511811 in
Width (B)
26 mm
1.023622 in
85 kN72 kN4950 rpm6400 rpm1.473 kg1473 g
FAG7216-B-XL-JP-UOAngular contact ball bearing
Bore diameter (d)
80 mm
3.149606 in
Outside diameter (D)
140 mm
5.511811 in
Width (B)
26 mm
1.023622 in
85 kN72 kN4950 rpm6400 rpm1.473 kg1473 g
FAG7216-B-XL-MPAngular contact ball bearing
Bore diameter (d)
80 mm
3.149606 in
Outside diameter (D)
140 mm
5.511811 in
Width (B)
26 mm
1.023622 in
85 kN72 kN4950 rpm8300 rpm1.555 kg1555 g
FAG7216-B-XL-MP-S1-UAAngular contact ball bearing
Bore diameter (d)
80 mm
3.149606 in
Outside diameter (D)
140 mm
5.511811 in
Width (B)
26 mm
1.023622 in
85 kN72 kN4950 rpm8300 rpm1.555 kg1555 g
FAG7216-B-XL-MP-UAAngular contact ball bearing
Bore diameter (d)
80 mm
3.149606 in
Outside diameter (D)
140 mm
5.511811 in
Width (B)
26 mm
1.023622 in
85 kN72 kN4950 rpm8300 rpm1.6 kg1600 g
FAG7216-B-XL-MP-UBAngular contact ball bearing
Bore diameter (d)
80 mm
3.149606 in
Outside diameter (D)
140 mm
5.511811 in
Width (B)
26 mm
1.023622 in
85 kN72 kN4950 rpm8300 rpm1.6 kg1600 g
FAG7216-B-XL-MP-UOAngular contact ball bearing
Bore diameter (d)
80 mm
3.149606 in
Outside diameter (D)
140 mm
5.511811 in
Width (B)
26 mm
1.023622 in
85 kN72 kN4950 rpm8300 rpm1.6 kg1600 g
FAG7216-B-XL-TVPAngular contact ball bearing
Bore diameter (d)
80 mm
3.149606 in
Outside diameter (D)
140 mm
5.511811 in
Width (B)
26 mm
1.023622 in
85 kN72 kN4950 rpm6400 rpm1.42 kg1420 g
FAG7216-B-XL-TVP-P5-ULAngular contact ball bearing
Bore diameter (d)
80 mm
3.149606 in
Outside diameter (D)
140 mm
5.511811 in
Width (B)
26 mm
1.023622 in
85 kN72 kN4950 rpm6400 rpm1.42 kg1420 g
FAG7216-B-XL-TVP-P5-UOAngular contact ball bearing
Bore diameter (d)
80 mm
3.149606 in
Outside diameter (D)
140 mm
5.511811 in
Width (B)
26 mm
1.023622 in
85 kN72 kN4950 rpm6400 rpm1.42 kg1420 g
FAG7216-B-XL-TVP-UAAngular contact ball bearing
Bore diameter (d)
80 mm
3.149606 in
Outside diameter (D)
140 mm
5.511811 in
Width (B)
26 mm
1.023622 in
85 kN72 kN4950 rpm6400 rpm1.42 kg1420 g
FAG7216-B-XL-TVP-UBAngular contact ball bearing
Bore diameter (d)
80 mm
3.149606 in
Outside diameter (D)
140 mm
5.511811 in
Width (B)
26 mm
1.023622 in
85 kN72 kN4950 rpm6400 rpm1.42 kg1420 g
FAG7216-B-XL-TVP-UOAngular contact ball bearing
Bore diameter (d)
80 mm
3.149606 in
Outside diameter (D)
140 mm
5.511811 in
Width (B)
26 mm
1.023622 in
85 kN72 kN4950 rpm6400 rpm1.42 kg1420 g
TIMKEN7216WNAngular contact ball bearing
Recorded bore (d)
80 mm
3.149606 in
Recorded outside dimension (D)
140 mm
5.511811 in
Catalogue width (symbol unverified)
26 mm
1.023622 in
80.5 kN69 kN——1.48 kg1480 g
TIMKEN7216WNSUAngular contact ball bearing
Recorded bore (d)
80 mm
3.149606 in
Recorded outside dimension (D)
140 mm
5.511811 in
Catalogue width (symbol unverified)
26 mm
1.023622 in
80.5 kN69 kN——1.48 kg1480 g
NSK7216AWAngular contact ball bearing
Bore diameter (d)
80 mm
3.149606 in
Outside diameter (D)
140 mm
5.511811 in
Individual bearing width (B)
26 mm
1.023622 in
98 kN76 kN——1.46 kg1460 g
NSK7216AWDBAngular contact ball bearing
Bore diameter (d)
80 mm
3.149606 in
Outside diameter (D)
140 mm
5.511811 in
Catalogue width (symbol unverified)
52 mm
2.047244 in
159 kN152 kN———
NSK7216AWDFAngular contact ball bearing
Bore diameter (d)
80 mm
3.149606 in
Outside diameter (D)
140 mm
5.511811 in
Catalogue width (symbol unverified)
52 mm
2.047244 in
159 kN152 kN———
NSK7216AWDTAngular contact ball bearing
Bore diameter (d)
80 mm
3.149606 in
Outside diameter (D)
140 mm
5.511811 in
Catalogue width (symbol unverified)
52 mm
2.047244 in
159 kN152 kN———
NSK7216BEAT85Angular contact ball bearing
Bore diameter (d)
80 mm
3.149606 in
Outside diameter (D)
140 mm
5.511811 in
Individual bearing width (B)
26 mm
1.023622 in
92 kN70 kN——1.42 kg1420 g
NSK7216BWAngular contact ball bearing
Bore diameter (d)
80 mm
3.149606 in
Outside diameter (D)
140 mm
5.511811 in
Individual bearing width (B)
26 mm
1.023622 in
88.5 kN69.5 kN——1.49 kg1490 g
NSK7216BWDBAngular contact ball bearing
Bore diameter (d)
80 mm
3.149606 in
Outside diameter (D)
140 mm
5.511811 in
Catalogue width (symbol unverified)
52 mm
2.047244 in
144 kN139 kN———
NSK7216BWDFAngular contact ball bearing
Bore diameter (d)
80 mm
3.149606 in
Outside diameter (D)
140 mm
5.511811 in
Catalogue width (symbol unverified)
52 mm
2.047244 in
144 kN139 kN———
NSK7216BWDTAngular contact ball bearing
Bore diameter (d)
80 mm
3.149606 in
Outside diameter (D)
140 mm
5.511811 in
Catalogue width (symbol unverified)
52 mm
2.047244 in
144 kN139 kN———
KOYO7216BAngular contact ball bearing
Bore diameter (d)
80 mm
3.149606 in
Outside diameter (D)
140 mm
5.511811 in
Width (B)
26 mm
1.023622 in
101 kN69.3 kN—3200 rpmLimiting Speeds(Grease Lub.): 3200 min-1Limiting Speeds(Oil Lub.): 4300 min-11.5 kg1500 g
KOYO7216BDBAngular contact ball bearing
Bore diameter (d)
80 mm
3.149606 in
Outside diameter (D)
140 mm
5.511811 in
Width (B)
52 mm
2.047244 in
163 kN139 kN—2500 rpmLimiting Speeds(Grease Lub.): 2500 min-1Limiting Speeds(Oil Lub.): 3400 min-13 kg3000 g
KOYO7216BDB FYAngular contact ball bearing
Bore diameter (d)
80 mm
3.149606 in
Outside diameter (D)
140 mm
5.511811 in
Width (B)
52 mm
2.047244 in
157 kN130 kN—3200 rpmLimiting Speeds(Grease Lub.): 3200 min-1Limiting Speeds(Oil Lub.): 4300 min-13 kg3000 g
KOYO7216BDFAngular contact ball bearing
Bore diameter (d)
80 mm
3.149606 in
Outside diameter (D)
140 mm
5.511811 in
Width (B)
52 mm
2.047244 in
163 kN139 kN—2500 rpmLimiting Speeds(Grease Lub.): 2500 min-1Limiting Speeds(Oil Lub.): 3400 min-13 kg3000 g
KOYO7216BDF FYAngular contact ball bearing
Bore diameter (d)
80 mm
3.149606 in
Outside diameter (D)
140 mm
5.511811 in
Width (B)
52 mm
2.047244 in
157 kN130 kN—3200 rpmLimiting Speeds(Grease Lub.): 3200 min-1Limiting Speeds(Oil Lub.): 4300 min-13 kg3000 g
KOYO7216BDTAngular contact ball bearing
Bore diameter (d)
80 mm
3.149606 in
Outside diameter (D)
140 mm
5.511811 in
Width (B)
52 mm
2.047244 in
163 kN139 kN—2500 rpmLimiting Speeds(Grease Lub.): 2500 min-1Limiting Speeds(Oil Lub.): 3400 min-13 kg3000 g
KOYO7216BDT FYAngular contact ball bearing
Bore diameter (d)
80 mm
3.149606 in
Outside diameter (D)
140 mm
5.511811 in
Width (B)
52 mm
2.047244 in
157 kN130 kN—3200 rpmLimiting Speeds(Grease Lub.): 3200 min-1Limiting Speeds(Oil Lub.): 4300 min-13 kg3000 g
KOYO7216B FYAngular contact ball bearing
Bore diameter (d)
80 mm
3.149606 in
Outside diameter (D)
140 mm
5.511811 in
Width (B)
26 mm
1.023622 in
96.4 kN65 kN—4000 rpmLimiting Speeds(Grease Lub.): 4000 min-1Limiting Speeds(Oil Lub.): 5400 min-11.5 kg1500 g
KOYO7216CAngular contact ball bearing
Bore diameter (d)
80 mm
3.149606 in
Outside diameter (D)
140 mm
5.511811 in
Width (B)
26 mm
1.023622 in
121 kN82.7 kN—6000 rpmLimiting Speeds(Grease Lub.): 6000 min-1Limiting Speeds(Oil Lub.): 7900 min-11.5 kg1500 g
KOYO7216CDBAngular contact ball bearing
Bore diameter (d)
80 mm
3.149606 in
Outside diameter (D)
140 mm
5.511811 in
Width (B)
52 mm
2.047244 in
197 kN165 kN—4700 rpmLimiting Speeds(Grease Lub.): 4700 min-1Limiting Speeds(Oil Lub.): 6300 min-13 kg3000 g
KOYO7216CDB FYAngular contact ball bearing
Bore diameter (d)
80 mm
3.149606 in
Outside diameter (D)
140 mm
5.511811 in
Width (B)
52 mm
2.047244 in
189 kN155 kN—5900 rpmLimiting Speeds(Grease Lub.): 5900 min-1Limiting Speeds(Oil Lub.): 7900 min-13 kg3000 g
KOYO7216CDFAngular contact ball bearing
Bore diameter (d)
80 mm
3.149606 in
Outside diameter (D)
140 mm
5.511811 in
Width (B)
52 mm
2.047244 in
197 kN165 kN—4700 rpmLimiting Speeds(Grease Lub.): 4700 min-1Limiting Speeds(Oil Lub.): 6300 min-13 kg3000 g
KOYO7216CDF FYAngular contact ball bearing
Bore diameter (d)
80 mm
3.149606 in
Outside diameter (D)
140 mm
5.511811 in
Width (B)
52 mm
2.047244 in
189 kN155 kN—5900 rpmLimiting Speeds(Grease Lub.): 5900 min-1Limiting Speeds(Oil Lub.): 7900 min-13 kg3000 g
KOYO7216CDTAngular contact ball bearing
Bore diameter (d)
80 mm
3.149606 in
Outside diameter (D)
140 mm
5.511811 in
Width (B)
52 mm
2.047244 in
197 kN165 kN—4700 rpmLimiting Speeds(Grease Lub.): 4700 min-1Limiting Speeds(Oil Lub.): 6300 min-13 kg3000 g
KOYO7216CDT FYAngular contact ball bearing
Bore diameter (d)
80 mm
3.149606 in
Outside diameter (D)
140 mm
5.511811 in
Width (B)
52 mm
2.047244 in
189 kN155 kN—5900 rpmLimiting Speeds(Grease Lub.): 5900 min-1Limiting Speeds(Oil Lub.): 7900 min-13 kg3000 g
KOYO7216C FYAngular contact ball bearing
Bore diameter (d)
80 mm
3.149606 in
Outside diameter (D)
140 mm
5.511811 in
Width (B)
26 mm
1.023622 in
116 kN77.5 kN—7500 rpmLimiting Speeds(Grease Lub.): 7500 min-1Limiting Speeds(Oil Lub.): 9900 min-11.5 kg1500 g
KOYO7216DBAngular contact ball bearing
Bore diameter (d)
80 mm
3.149606 in
Outside diameter (D)
140 mm
5.511811 in
Width (B)
52 mm
2.047244 in
181 kN152 kN—3400 rpmLimiting Speeds(Grease Lub.): 3400 min-1Limiting Speeds(Oil Lub.): 4300 min-13 kg3000 g
KOYO7216DB FYAngular contact ball bearing
Bore diameter (d)
80 mm
3.149606 in
Outside diameter (D)
140 mm
5.511811 in
Width (B)
52 mm
2.047244 in
173 kN143 kN—4300 rpmLimiting Speeds(Grease Lub.): 4300 min-1Limiting Speeds(Oil Lub.): 5400 min-13 kg3000 g
KOYO7216DFAngular contact ball bearing
Bore diameter (d)
80 mm
3.149606 in
Outside diameter (D)
140 mm
5.511811 in
Width (B)
52 mm
2.047244 in
181 kN152 kN—3400 rpmLimiting Speeds(Grease Lub.): 3400 min-1Limiting Speeds(Oil Lub.): 4300 min-13 kg3000 g
KOYO7216DF FYAngular contact ball bearing
Bore diameter (d)
80 mm
3.149606 in
Outside diameter (D)
140 mm
5.511811 in
Width (B)
52 mm
2.047244 in
173 kN143 kN—4300 rpmLimiting Speeds(Grease Lub.): 4300 min-1Limiting Speeds(Oil Lub.): 5400 min-13 kg3000 g
KOYO7216DTAngular contact ball bearing
Bore diameter (d)
80 mm
3.149606 in
Outside diameter (D)
140 mm
5.511811 in
Width (B)
52 mm
2.047244 in
181 kN152 kN—3400 rpmLimiting Speeds(Grease Lub.): 3400 min-1Limiting Speeds(Oil Lub.): 4300 min-13 kg3000 g
KOYO7216DT FYAngular contact ball bearing
Bore diameter (d)
80 mm
3.149606 in
Outside diameter (D)
140 mm
5.511811 in
Width (B)
52 mm
2.047244 in
173 kN143 kN—4300 rpmLimiting Speeds(Grease Lub.): 4300 min-1Limiting Speeds(Oil Lub.): 5400 min-13 kg3000 g
KOYO7216 FYAngular contact ball bearing
Bore diameter (d)
80 mm
3.149606 in
Outside diameter (D)
140 mm
5.511811 in
Width (B)
26 mm
1.023622 in
107 kN71.5 kN—5400 rpmLimiting Speeds(Grease Lub.): 5400 min-1Limiting Speeds(Oil Lub.): 6700 min-11.5 kg1500 g
Compare recorded seals, clearance, precision and materials

Manufacturer wording is retained. A missing property is not inferred from another brand or a similar suffix.

Brand / designationClosureOriginal precisionClearanceCageMaterialLubricant
KOYO 7216Not recordedNot recordedNot recordedNot recordedNot recordedNot recorded
SKF 7216 ACDGA/P4AWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7216 ACDGB/HCP4AWithoutNot recordedNot recordedNot recordedHybrid (ceramic balls)None
SKF 7216 ACDGB/P4AWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7216 ACDGC/P4AWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7216 ACD/HCP4AWithoutNot recordedNot recordedNot recordedHybrid (ceramic balls)None
SKF 7216 ACD/HCP4ADGAWithoutNot recordedNot recordedNot recordedHybrid (ceramic balls)None
SKF 7216 ACD/P4AWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7216 ACD/P4ADBAWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7216 ACD/P4ADBBWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7216 ACD/P4ADBCWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7216 ACD/P4ADGAWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7216 ACD/P4ADGBWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7216 ACD/P4ATBTBWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7216 ACD/P4ATBTCWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7216 BECBJWithoutP6Not recordedSteel sheet metalBearing steelNone
SKF 7216 BECBMWithoutP6Not recordedMachined brassBearing steelNone
SKF 7216 BECBPWithoutP6Not recordedNon-metallicBearing steelNone
SKF 7216 BECBYWithoutP6Not recordedBrass sheet metalBearing steelNone
SKF 7216 BECBY/W64WithoutNot recordedNot recordedBrass sheet metalBearing steelSolid Oil
SKF 7216 BEGAFWithoutP6Not recordedMachined steelBearing steelNone
SKF 7216 BEGAMWithoutP6Not recordedMachined brassBearing steelNone
SKF 7216 BEGAPWithoutP6Not recordedNon-metallicBearing steelNone
SKF 7216 BEGAPHWithoutP6Not recordedNon-metallicBearing steelNone
SKF 7216 BEPWithoutNormalNot recordedNon-metallicBearing steelNone
SKF 7216 CDGA/HCP4AWithoutNot recordedNot recordedNot recordedHybrid (ceramic balls)None
SKF 7216 CDGA/P4AWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7216 CDGB/P4AWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7216 CDGD/P4AWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7216 CD/HCP4ADGAWithoutNot recordedNot recordedNot recordedHybrid (ceramic balls)None
SKF 7216 CD/HCP4AQBCDWithoutNot recordedNot recordedNot recordedHybrid (ceramic balls)None
SKF 7216 CD/P4AWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7216 CD/P4ADBAWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7216 CD/P4ADBCWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7216 CD/P4ADFAWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7216 CD/P4ADFBWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7216 CD/P4ADGAWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7216 CD/P4ADGBWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7216 CD/P4ADGCWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7216 CD/P4ADGDWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7216 CD/P4AQBCBWithoutNot recordedNot recordedNot recordedBearing steelNone
FAG 7216-B-XL-FP-UOWithout — Not sealedPN — Normal (ISO 492:2023)Not recordedFP — Solid steel cage, ball guidedNot recordedWithout — Bearing not greased
FAG 7216-B-XL-JPWithout — Not sealedPN — Normal (ISO 492:2023)Not recordedJP — Steel sheet metalNot recordedWithout — Bearing not greased
FAG 7216-B-XL-JP-UAWithout — Not sealedPN — Normal (ISO 492:2023)Not recordedJP — Steel sheet metalNot recordedWithout — Bearing not greased
FAG 7216-B-XL-JP-UOWithout — Not sealedPN — Normal (ISO 492:2023)Not recordedJP — Steel sheet metalNot recordedWithout — Bearing not greased
FAG 7216-B-XL-MPWithout — Not sealedPN — Normal (ISO 492:2023)Not recordedMP — Solid brass cage, ball guidedNot recordedWithout — Bearing not greased
FAG 7216-B-XL-MP-S1-UAWithout — Not sealedPN — Normal (ISO 492:2023)Not recordedMP — Solid brass cage, ball guidedNot recordedWithout — Bearing not greased
FAG 7216-B-XL-MP-UAWithout — Not sealedPN — Normal (ISO 492:2023)Not recordedMP — Solid brass cage, ball guidedNot recordedWithout — Bearing not greased
FAG 7216-B-XL-MP-UBWithout — Not sealedPN — Normal (ISO 492:2023)Not recordedMP — Solid brass cage, ball guidedNot recordedWithout — Bearing not greased
FAG 7216-B-XL-MP-UOWithout — Not sealedPN — Normal (ISO 492:2023)Not recordedMP — Solid brass cage, ball guidedNot recordedWithout — Bearing not greased
FAG 7216-B-XL-TVPWithout — Not sealedPN — Normal (ISO 492:2023)Not recordedTVP — Solid cage made of glass-fiber reinforced polyamid PA66Not recordedWithout — Bearing not greased
FAG 7216-B-XL-TVP-P5-ULWithout — Not sealedP5 — Class 5 (ISO 492:2023)Not recordedTVP — Solid cage made of glass-fiber reinforced polyamid PA66Not recordedWithout — Bearing not greased
FAG 7216-B-XL-TVP-P5-UOWithout — Not sealedP5 — Class 5 (ISO 492:2023)Not recordedTVP — Solid cage made of glass-fiber reinforced polyamid PA66Not recordedWithout — Bearing not greased
FAG 7216-B-XL-TVP-UAWithout — Not sealedPN — Normal (ISO 492:2023)Not recordedTVP — Solid cage made of glass-fiber reinforced polyamid PA66Not recordedWithout — Bearing not greased
FAG 7216-B-XL-TVP-UBWithout — Not sealedPN — Normal (ISO 492:2023)Not recordedTVP — Solid cage made of glass-fiber reinforced polyamid PA66Not recordedWithout — Bearing not greased
FAG 7216-B-XL-TVP-UOWithout — Not sealedPN — Normal (ISO 492:2023)Not recordedTVP — Solid cage made of glass-fiber reinforced polyamid PA66Not recordedWithout — Bearing not greased
TIMKEN 7216WNOpenNot recordedNot recordedBrass cageNot recordedNot recorded
TIMKEN 7216WNSUOpenNot recordedNot recordedBrass cageNot recordedNot recorded
NSK 7216AWNot recordedNot recordedNot recordedPressed steelNot recordedNot recorded
NSK 7216AWDBNot recordedNot recordedNot recordedPressed steelNot recordedNot recorded
NSK 7216AWDFNot recordedNot recordedNot recordedPressed steelNot recordedNot recorded
NSK 7216AWDTNot recordedNot recordedNot recordedPressed steelNot recordedNot recorded
NSK 7216BEAT85Not recordedNot recordedNot recordedPolyamide 46 resinNot recordedNot recorded
NSK 7216BWNot recordedNot recordedNot recordedPressed steelNot recordedNot recorded
NSK 7216BWDBNot recordedNot recordedNot recordedPressed steelNot recordedNot recorded
NSK 7216BWDFNot recordedNot recordedNot recordedPressed steelNot recordedNot recorded
NSK 7216BWDTNot recordedNot recordedNot recordedPressed steelNot recordedNot recorded
KOYO 7216BNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 7216BDBNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 7216BDB FYNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 7216BDFNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 7216BDF FYNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 7216BDTNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 7216BDT FYNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 7216B FYNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 7216CNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 7216CDBNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 7216CDB FYNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 7216CDFNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 7216CDF FYNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 7216CDTNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 7216CDT FYNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 7216C FYNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 7216DBNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 7216DB FYNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 7216DFNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 7216DF FYNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 7216DTNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 7216DT FYNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 7216 FYNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded

How to compare these values

  • Use the displayed dimension names and original symbols. Housing length L, height H2 and flange width are not bearing outside diameter D. A catalogue width with an unverified symbol must not be assumed to be inner-ring width B or assembly width T. Open the product record for mounting dimensions and geometry.
  • Inch values are calculated from the recorded millimetres using 25.4 mm per inch, rounded to six decimal places. They do not change a metric bearing into an inch-series bearing. Gram values are converted from the recorded mass in kilograms.
  • C and C0 describe different rating conditions. They are not a single safe working-load limit and cannot replace an application load calculation.
  • Reference and limiting speeds are separate catalogue values. The source grease/oil context is shown where recorded. Lubricant, seals, loads, fit, clearance and cooling affect the usable operating speed.
  • A common base number does not prove equivalent seals, clearance, precision, material or interchangeability. Open the full designation for these fields.
Check load calculations →Estimate rating life →Decode the complete marking →Check replacement evidence →

Related prefix matches — other model numbers may appear

These discovery results can contain a longer number or a different component. They are not specifications for the requested exact model. Open the complete product to inspect its original geometry.

KOYO

7216

Angular contact ball bearing

View full technical record →SKF

7216 ACDGA/P4A

Super-precision, high-capacity, universally matchable single row angular contact ball bearing

View full technical record →SKF

7216 ACDGB/HCP4A

Super-precision, high-capacity, universally matchable single row angular contact ball bearing

View full technical record →SKF

7216 ACDGB/P4A

Super-precision, high-capacity, universally matchable single row angular contact ball bearing

View full technical record →SKF

7216 ACDGC/P4A

Super-precision, high-capacity, universally matchable single row angular contact ball bearing

View full technical record →SKF

7216 ACD/HCP4A

Super-precision, high-capacity, single row angular contact ball bearing

View full technical record →SKF

7216 ACD/HCP4ADGA

Matched set of two super-precision, high-capacity, D design, single row angular contact ball bearings

View full technical record →SKF

7216 ACD/P4A

Super-precision, high-capacity, single row angular contact ball bearing

View full technical record →SKF

7216 ACD/P4ADBA

Matched set of two super-precision, high-capacity, D design, single row angular contact ball bearings

View full technical record →SKF

7216 ACD/P4ADBB

Matched set of two super-precision, high-capacity, D design, single row angular contact ball bearings

View full technical record →SKF

7216 ACD/P4ADBC

Matched set of two super-precision, high-capacity, D design, single row angular contact ball bearings

View full technical record →SKF

7216 ACD/P4ADGA

Matched set of two super-precision, high-capacity, D design, single row angular contact ball bearings

View full technical record →
Filter all 90 prefix results →

Check the drawing before substituting

Nominal dimensions are not shaft-fit tolerances. Different variants can add grooves, flanges, wider rings or assembly components. When the table has different dimensions, the complete designation—not the shared prefix—controls.

Measurement guide →Cross-reference checks →

Reference basis & data limits

Manufacturer terminology is retained in the product records. Technical reference basis: JTEKT Basic Bearing Knowledge (boundary dimensions, tolerance classes and lubrication); NSK Bearing ABCs (lubrication, designations and clearance); NTN technical FAQs (closure codes and component interchange); SKF rolling-bearing selection and maintenance references.

Selection workflows and catalogue grouping are BearingScope editorial aids. Verify the current drawing and application requirements before using a candidate. Missing database information is not converted into an assumed match.

Search the consolidated catalogue

Find, filter and compare bearing model data in one place.

Open model search