Find · understand · compare
7215 bearing dimensions & suffix variants
Look up recorded dimensions for designations beginning with 7215. The table retains complete manufacturer designations so special suffixes and different dimensional variants remain visible.
On this page5 sections ⌄
Find by measured dimensions
Enter bore d, outside diameter D and width B. Use decimals or inch fractions such as 1/2 or 1 1/4.
7215 dimensions and recorded technical data
The recorded 7215 base designation measures 75×130×25 mm (inside diameter d × outside diameter D × width B). This answer uses unsuffixed records from KOYO. It does not assign the same dimensions or operating ratings to every suffix.
The numeric series boundary is preserved: a longer number is not included merely because its first digits match. 81 recorded variants are listed. A dash means the value is missing, not zero.
No recorded variant matches these filters. Clear a filter to see other records; no substitute has been inferred.
| Brand / full designation | Named dimensions (mm / in) | Dynamic C (kN) | Static C0 (kN) | Reference speed (rpm) | Limiting speed (rpm) | Mass (kg / g) |
|---|---|---|---|---|---|---|
| KOYO7215Angular contact ball bearing |
| 103 kN | 69.5 kN | — | 4600 rpmLimiting Speeds(Grease Lub.): 4600 min-1Limiting Speeds(Oil Lub.): 5700 min-1 | 1.23 kg1230 g |
| SKF7215 ACDGA/HCP4ASuper-precision, high-capacity, universally matchable single row angular contact ball bearing |
| 68.9 kN | 58.5 kN | — | — | 0.971 kg971 g |
| SKF7215 ACDGA/P4ASuper-precision, high-capacity, universally matchable single row angular contact ball bearing |
| 68.9 kN | 58.5 kN | — | — | 1.17 kg1170 g |
| SKF7215 ACDGB/P4ASuper-precision, high-capacity, universally matchable single row angular contact ball bearing |
| 68.9 kN | 58.5 kN | — | — | 1.17 kg1170 g |
| SKF7215 ACDGC/P4ASuper-precision, high-capacity, universally matchable single row angular contact ball bearing |
| 68.9 kN | 58.5 kN | — | — | 1.17 kg1170 g |
| SKF7215 ACD/P4ASuper-precision, high-capacity, single row angular contact ball bearing |
| 68.9 kN | 58.5 kN | — | — | 1.17 kg1170 g |
| SKF7215 ACD/P4ADBAMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings |
| 111 kN | 118 kN | — | — | 2.34 kg2340 g |
| SKF7215 ACD/P4ADFAMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings |
| 111 kN | 118 kN | — | — | 2.34 kg2340 g |
| SKF7215 ACD/P4ADGAMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings |
| 111 kN | 118 kN | — | — | 2.34 kg2340 g |
| SKF7215 ACD/P4AQBCCMatched set of four super-precision, high-capacity, D design, single row angular contact ball bearings |
| 182 kN | 236 kN | — | — | 4.7 kg4700 g |
| SKF7215 ACD/P4AQBTCMatched set of four super-precision, high-capacity, D design, single row angular contact ball bearings |
| 182 kN | 236 kN | — | — | 4.7 kg4700 g |
| SKF7215 ACD/P4ATGAMatched set of three super-precision, high-capacity, D design, single row angular contact ball bearings |
| 148 kN | 176 kN | — | — | 3.52 kg3520 g |
| SKF7215 BECBJSingle row angular contact ball bearing |
| 73.5 kN | 65.5 kN | 6000 rpm | 6300 rpm | 1.24 kg1240 g |
| SKF7215 BECBMSingle row angular contact ball bearing |
| 73.5 kN | 65.5 kN | 6300 rpm | 8000 rpm | 1.28 kg1280 g |
| SKF7215 BECBPSingle row angular contact ball bearing |
| 73.5 kN | 65.5 kN | 6000 rpm | 6300 rpm | 1.16 kg1160 g |
| SKF7215 BECBYSingle row angular contact ball bearing |
| 73.5 kN | 65.5 kN | 6300 rpm | 6300 rpm | 1.26 kg1260 g |
| SKF7215 BEGAMSingle row angular contact ball bearing |
| 73.5 kN | 65.5 kN | 6300 rpm | 8000 rpm | 1.28 kg1280 g |
| SKF7215 BEGAPSingle row angular contact ball bearing |
| 73.5 kN | 65.5 kN | 6000 rpm | 6300 rpm | 1.16 kg1160 g |
| SKF7215 BEGAYSingle row angular contact ball bearing |
| 73.5 kN | 65.5 kN | 6300 rpm | 6300 rpm | 1.26 kg1260 g |
| SKF7215 BEPSingle row angular contact ball bearing |
| 70.2 kN | 60 kN | 6000 rpm | 5600 rpm | 1.16 kg1160 g |
| SKF7215 CDGA/HCP4ASuper-precision, high-capacity, universally matchable single row angular contact ball bearing |
| 71.5 kN | 62 kN | — | — | 0.968 kg968 g |
| SKF7215 CDGA/P4ASuper-precision, high-capacity, universally matchable single row angular contact ball bearing |
| 71.5 kN | 62 kN | — | — | 1.17 kg1170 g |
| SKF7215 CDGB/P4ASuper-precision, high-capacity, universally matchable single row angular contact ball bearing |
| 71.5 kN | 62 kN | — | — | 1.17 kg1170 g |
| SKF7215 CDGC/P4ASuper-precision, high-capacity, universally matchable single row angular contact ball bearing |
| 71.5 kN | 62 kN | — | — | 1.17 kg1170 g |
| SKF7215 CD/HCP4ADGAMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings |
| 117 kN | 125 kN | — | — | 1.94 kg1940 g |
| SKF7215 CD/P4ASuper-precision, high-capacity, single row angular contact ball bearing |
| 71.5 kN | 62 kN | — | — | 1.17 kg1170 g |
| SKF7215 CD/P4ADBAMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings |
| 117 kN | 125 kN | — | — | 2.34 kg2340 g |
| SKF7215 CD/P4ADBCMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings |
| 117 kN | 125 kN | — | — | 2.35 kg2350 g |
| SKF7215 CD/P4ADGAMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings |
| 117 kN | 125 kN | — | — | 2.35 kg2350 g |
| SKF7215 CD/P4ADGBMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings |
| 117 kN | 125 kN | — | — | 2.34 kg2340 g |
| SKF7215 CD/P4ADGCMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings |
| 117 kN | 125 kN | — | — | 2.35 kg2350 g |
| FAG7215-B-XL-JPAngular contact ball bearing |
| 73 kN | 62 kN | 5300 rpm | 6900 rpm | 1.234 kg1234 g |
| FAG7215-B-XL-JP-UAAngular contact ball bearing |
| 73 kN | 62 kN | 5300 rpm | 6900 rpm | 1.25 kg1250 g |
| FAG7215-B-XL-JP-UOAngular contact ball bearing |
| 73 kN | 62 kN | 5300 rpm | 6900 rpm | 1.25 kg1250 g |
| FAG7215-B-XL-MPAngular contact ball bearing |
| 73 kN | 62 kN | 5300 rpm | 8900 rpm | 1.33 kg1330 g |
| FAG7215-B-XL-MP-P5-UOAngular contact ball bearing |
| 73 kN | 62 kN | 5300 rpm | 8900 rpm | 1.33 kg1330 g |
| FAG7215-B-XL-MP-P6-UAAngular contact ball bearing |
| 73 kN | 62 kN | 5300 rpm | 8900 rpm | 1.33 kg1330 g |
| FAG7215-B-XL-MP-UAAngular contact ball bearing |
| 73 kN | 62 kN | 5300 rpm | 8900 rpm | 1.315 kg1315 g |
| FAG7215-B-XL-MP-UBAngular contact ball bearing |
| 73 kN | 62 kN | 5300 rpm | 8900 rpm | 1.315 kg1315 g |
| FAG7215-B-XL-MP-UOAngular contact ball bearing |
| 73 kN | 62 kN | 5300 rpm | 8900 rpm | 1.35 kg1350 g |
| FAG7215-B-XL-TVPAngular contact ball bearing |
| 73 kN | 62 kN | 5300 rpm | 6900 rpm | 1.17 kg1170 g |
| FAG7215-B-XL-TVP-P5Angular contact ball bearing |
| 73 kN | 62 kN | 5300 rpm | 6900 rpm | 1.18 kg1180 g |
| FAG7215-B-XL-TVP-P5-ULAngular contact ball bearing |
| 73 kN | 62 kN | 5300 rpm | 6900 rpm | 1.17 kg1170 g |
| FAG7215-B-XL-TVP-P5-UOAngular contact ball bearing |
| 73 kN | 62 kN | 5300 rpm | 6900 rpm | 1.18 kg1180 g |
| FAG7215-B-XL-TVP-UAAngular contact ball bearing |
| 73 kN | 62 kN | 5300 rpm | 6900 rpm | 1.17 kg1170 g |
| FAG7215-B-XL-TVP-UBAngular contact ball bearing |
| 73 kN | 62 kN | 5300 rpm | 6900 rpm | 1.16 kg1160 g |
| FAG7215-B-XL-TVP-UOAngular contact ball bearing |
| 73 kN | 62 kN | 5300 rpm | 6900 rpm | 1.17 kg1170 g |
| TIMKEN7215WNAngular contact ball bearing |
| 68.5 kN | 58.3 kN | — | — | 1.27 kg1270 g |
| TIMKEN7215WNSUAngular contact ball bearing |
| 68.5 kN | 58.3 kN | — | — | 1.27 kg1270 g |
| NSK7215AWAngular contact ball bearing |
| 83.5 kN | 64.5 kN | — | — | 1.19 kg1190 g |
| NSK7215AWDBAngular contact ball bearing |
| 136 kN | 129 kN | — | — | — |
| NSK7215AWDFAngular contact ball bearing |
| 136 kN | 129 kN | — | — | — |
| NSK7215AWDTAngular contact ball bearing |
| 136 kN | 129 kN | — | — | — |
| NSK7215BEAT85Angular contact ball bearing |
| 82.5 kN | 63.5 kN | — | — | 1.18 kg1180 g |
| NSK7215BWAngular contact ball bearing |
| 75.5 kN | 58.5 kN | — | — | 1.22 kg1220 g |
| NSK7215BWDBAngular contact ball bearing |
| 123 kN | 117 kN | — | — | — |
| NSK7215BWDFAngular contact ball bearing |
| 123 kN | 117 kN | — | — | — |
| NSK7215BWDTAngular contact ball bearing |
| 123 kN | 117 kN | — | — | — |
| KOYO7215BAngular contact ball bearing |
| 93.6 kN | 63.3 kN | — | 3400 rpmLimiting Speeds(Grease Lub.): 3400 min-1Limiting Speeds(Oil Lub.): 4600 min-1 | 1.23 kg1230 g |
| KOYO7215BDBAngular contact ball bearing |
| 152 kN | 127 kN | — | 2800 rpmLimiting Speeds(Grease Lub.): 2800 min-1Limiting Speeds(Oil Lub.): 3600 min-1 | 2.46 kg2460 g |
| KOYO7215BDB FYAngular contact ball bearing |
| 146 kN | 119 kN | — | 3500 rpmLimiting Speeds(Grease Lub.): 3500 min-1Limiting Speeds(Oil Lub.): 4600 min-1 | 2.46 kg2460 g |
| KOYO7215BDFAngular contact ball bearing |
| 152 kN | 127 kN | — | 2800 rpmLimiting Speeds(Grease Lub.): 2800 min-1Limiting Speeds(Oil Lub.): 3600 min-1 | 2.46 kg2460 g |
| KOYO7215BDF FYAngular contact ball bearing |
| 146 kN | 119 kN | — | 3500 rpmLimiting Speeds(Grease Lub.): 3500 min-1Limiting Speeds(Oil Lub.): 4600 min-1 | 2.46 kg2460 g |
| KOYO7215BDTAngular contact ball bearing |
| 152 kN | 127 kN | — | 2800 rpmLimiting Speeds(Grease Lub.): 2800 min-1Limiting Speeds(Oil Lub.): 3600 min-1 | 2.46 kg2460 g |
| KOYO7215BDT FYAngular contact ball bearing |
| 146 kN | 119 kN | — | 3500 rpmLimiting Speeds(Grease Lub.): 3500 min-1Limiting Speeds(Oil Lub.): 4600 min-1 | 2.46 kg2460 g |
| KOYO7215B FYAngular contact ball bearing |
| 89.6 kN | 59.3 kN | — | 4300 rpmLimiting Speeds(Grease Lub.): 4300 min-1Limiting Speeds(Oil Lub.): 5800 min-1 | 1.23 kg1230 g |
| KOYO7215CAngular contact ball bearing |
| 112 kN | 75.3 kN | — | 6400 rpmLimiting Speeds(Grease Lub.): 6400 min-1Limiting Speeds(Oil Lub.): 8800 min-1 | 1.23 kg1230 g |
| KOYO7215CDBAngular contact ball bearing |
| 183 kN | 151 kN | — | 5100 rpmLimiting Speeds(Grease Lub.): 5100 min-1Limiting Speeds(Oil Lub.): 6800 min-1 | 2.46 kg2460 g |
| KOYO7215CDB FYAngular contact ball bearing |
| 175 kN | 141 kN | — | 6400 rpmLimiting Speeds(Grease Lub.): 6400 min-1Limiting Speeds(Oil Lub.): 8500 min-1 | 2.46 kg2460 g |
| KOYO7215CDFAngular contact ball bearing |
| 183 kN | 151 kN | — | 5100 rpmLimiting Speeds(Grease Lub.): 5100 min-1Limiting Speeds(Oil Lub.): 6800 min-1 | 2.46 kg2460 g |
| KOYO7215CDF FYAngular contact ball bearing |
| 175 kN | 141 kN | — | 6400 rpmLimiting Speeds(Grease Lub.): 6400 min-1Limiting Speeds(Oil Lub.): 8500 min-1 | 2.46 kg2460 g |
| KOYO7215CDTAngular contact ball bearing |
| 183 kN | 151 kN | — | 5100 rpmLimiting Speeds(Grease Lub.): 5100 min-1Limiting Speeds(Oil Lub.): 6800 min-1 | 2.46 kg2460 g |
| KOYO7215CDT FYAngular contact ball bearing |
| 175 kN | 141 kN | — | 6400 rpmLimiting Speeds(Grease Lub.): 6400 min-1Limiting Speeds(Oil Lub.): 8500 min-1 | 2.46 kg2460 g |
| KOYO7215C FYAngular contact ball bearing |
| 108 kN | 70.6 kN | — | 8000 rpmLimiting Speeds(Grease Lub.): 8000 min-1Limiting Speeds(Oil Lub.): 11000 min-1 | 1.23 kg1230 g |
| KOYO7215DBAngular contact ball bearing |
| 168 kN | 139 kN | — | 3600 rpmLimiting Speeds(Grease Lub.): 3600 min-1Limiting Speeds(Oil Lub.): 4600 min-1 | 2.46 kg2460 g |
| KOYO7215DB FYAngular contact ball bearing |
| 161 kN | 130 kN | — | 4600 rpmLimiting Speeds(Grease Lub.): 4600 min-1Limiting Speeds(Oil Lub.): 5800 min-1 | 2.46 kg2460 g |
| KOYO7215DFAngular contact ball bearing |
| 168 kN | 139 kN | — | 3600 rpmLimiting Speeds(Grease Lub.): 3600 min-1Limiting Speeds(Oil Lub.): 4600 min-1 | 2.46 kg2460 g |
| KOYO7215DF FYAngular contact ball bearing |
| 161 kN | 130 kN | — | 4600 rpmLimiting Speeds(Grease Lub.): 4600 min-1Limiting Speeds(Oil Lub.): 5800 min-1 | 2.46 kg2460 g |
| KOYO7215DTAngular contact ball bearing |
| 168 kN | 139 kN | — | 3600 rpmLimiting Speeds(Grease Lub.): 3600 min-1Limiting Speeds(Oil Lub.): 4600 min-1 | 2.46 kg2460 g |
| KOYO7215DT FYAngular contact ball bearing |
| 161 kN | 130 kN | — | 4600 rpmLimiting Speeds(Grease Lub.): 4600 min-1Limiting Speeds(Oil Lub.): 5800 min-1 | 2.46 kg2460 g |
| KOYO7215 FYAngular contact ball bearing |
| 99 kN | 65.2 kN | — | 5800 rpmLimiting Speeds(Grease Lub.): 5800 min-1Limiting Speeds(Oil Lub.): 7200 min-1 | 1.23 kg1230 g |
Compare recorded seals, clearance, precision and materials
Manufacturer wording is retained. A missing property is not inferred from another brand or a similar suffix.
| Brand / designation | Closure | Original precision | Clearance | Cage | Material | Lubricant |
|---|---|---|---|---|---|---|
| KOYO 7215 | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| SKF 7215 ACDGA/HCP4A | Without | Not recorded | Not recorded | Not recorded | Hybrid (ceramic balls) | None |
| SKF 7215 ACDGA/P4A | Without | Not recorded | Not recorded | Not recorded | Bearing steel | None |
| SKF 7215 ACDGB/P4A | Without | Not recorded | Not recorded | Not recorded | Bearing steel | None |
| SKF 7215 ACDGC/P4A | Without | Not recorded | Not recorded | Not recorded | Bearing steel | None |
| SKF 7215 ACD/P4A | Without | Not recorded | Not recorded | Not recorded | Bearing steel | None |
| SKF 7215 ACD/P4ADBA | Without | Not recorded | Not recorded | Not recorded | Bearing steel | None |
| SKF 7215 ACD/P4ADFA | Without | Not recorded | Not recorded | Not recorded | Bearing steel | None |
| SKF 7215 ACD/P4ADGA | Without | Not recorded | Not recorded | Not recorded | Bearing steel | None |
| SKF 7215 ACD/P4AQBCC | Without | Not recorded | Not recorded | Not recorded | Bearing steel | None |
| SKF 7215 ACD/P4AQBTC | Without | Not recorded | Not recorded | Not recorded | Bearing steel | None |
| SKF 7215 ACD/P4ATGA | Without | Not recorded | Not recorded | Not recorded | Bearing steel | None |
| SKF 7215 BECBJ | Without | P6 | Not recorded | Steel sheet metal | Bearing steel | None |
| SKF 7215 BECBM | Without | P6 | Not recorded | Machined brass | Bearing steel | None |
| SKF 7215 BECBP | Without | P6 | Not recorded | Non-metallic | Bearing steel | None |
| SKF 7215 BECBY | Without | P6 | Not recorded | Brass sheet metal | Bearing steel | None |
| SKF 7215 BEGAM | Without | P6 | Not recorded | Machined brass | Bearing steel | None |
| SKF 7215 BEGAP | Without | P6 | Not recorded | Non-metallic | Bearing steel | None |
| SKF 7215 BEGAY | Without | P6 | Not recorded | Brass sheet metal | Bearing steel | None |
| SKF 7215 BEP | Without | Normal | Not recorded | Non-metallic | Bearing steel | None |
| SKF 7215 CDGA/HCP4A | Without | Not recorded | Not recorded | Not recorded | Hybrid (ceramic balls) | None |
| SKF 7215 CDGA/P4A | Without | Not recorded | Not recorded | Not recorded | Bearing steel | None |
| SKF 7215 CDGB/P4A | Without | Not recorded | Not recorded | Not recorded | Bearing steel | None |
| SKF 7215 CDGC/P4A | Without | Not recorded | Not recorded | Not recorded | Bearing steel | None |
| SKF 7215 CD/HCP4ADGA | Without | Not recorded | Not recorded | Not recorded | Hybrid (ceramic balls) | None |
| SKF 7215 CD/P4A | Without | Not recorded | Not recorded | Not recorded | Bearing steel | None |
| SKF 7215 CD/P4ADBA | Without | Not recorded | Not recorded | Not recorded | Bearing steel | None |
| SKF 7215 CD/P4ADBC | Without | Not recorded | Not recorded | Not recorded | Bearing steel | None |
| SKF 7215 CD/P4ADGA | Without | Not recorded | Not recorded | Not recorded | Bearing steel | None |
| SKF 7215 CD/P4ADGB | Without | Not recorded | Not recorded | Not recorded | Bearing steel | None |
| SKF 7215 CD/P4ADGC | Without | Not recorded | Not recorded | Not recorded | Bearing steel | None |
| FAG 7215-B-XL-JP | Without — Not sealed | PN — Normal (ISO 492:2023) | Not recorded | JP — Steel sheet metal | Not recorded | Without — Bearing not greased |
| FAG 7215-B-XL-JP-UA | Without — Not sealed | PN — Normal (ISO 492:2023) | Not recorded | JP — Steel sheet metal | Not recorded | Without — Bearing not greased |
| FAG 7215-B-XL-JP-UO | Without — Not sealed | PN — Normal (ISO 492:2023) | Not recorded | JP — Steel sheet metal | Not recorded | Without — Bearing not greased |
| FAG 7215-B-XL-MP | Without — Not sealed | PN — Normal (ISO 492:2023) | Not recorded | MP — Solid brass cage, ball guided | Not recorded | Without — Bearing not greased |
| FAG 7215-B-XL-MP-P5-UO | Without — Not sealed | P5 — Class 5 (ISO 492:2023) | Not recorded | MP — Solid brass cage, ball guided | Not recorded | Without — Bearing not greased |
| FAG 7215-B-XL-MP-P6-UA | Without — Not sealed | P6 — Class 6 (ISO 492:2023) | Not recorded | MP — Solid brass cage, ball guided | Not recorded | Without — Bearing not greased |
| FAG 7215-B-XL-MP-UA | Without — Not sealed | PN — Normal (ISO 492:2023) | Not recorded | MP — Solid brass cage, ball guided | Not recorded | Without — Bearing not greased |
| FAG 7215-B-XL-MP-UB | Without — Not sealed | PN — Normal (ISO 492:2023) | Not recorded | MP — Solid brass cage, ball guided | Not recorded | Without — Bearing not greased |
| FAG 7215-B-XL-MP-UO | Without — Not sealed | PN — Normal (ISO 492:2023) | Not recorded | MP — Solid brass cage, ball guided | Not recorded | Without — Bearing not greased |
| FAG 7215-B-XL-TVP | Without — Not sealed | PN — Normal (ISO 492:2023) | Not recorded | TVP — Solid cage made of glass-fiber reinforced polyamid PA66 | Not recorded | Without — Bearing not greased |
| FAG 7215-B-XL-TVP-P5 | Without — Not sealed | P5 — Class 5 (ISO 492:2023) | Not recorded | TVP — Solid cage made of glass-fiber reinforced polyamid PA66 | Not recorded | Without — Bearing not greased |
| FAG 7215-B-XL-TVP-P5-UL | Without — Not sealed | P5 — Class 5 (ISO 492:2023) | Not recorded | TVP — Solid cage made of glass-fiber reinforced polyamid PA66 | Not recorded | Without — Bearing not greased |
| FAG 7215-B-XL-TVP-P5-UO | Without — Not sealed | P5 — Class 5 (ISO 492:2023) | Not recorded | TVP — Solid cage made of glass-fiber reinforced polyamid PA66 | Not recorded | Without — Bearing not greased |
| FAG 7215-B-XL-TVP-UA | Without — Not sealed | PN — Normal (ISO 492:2023) | Not recorded | TVP — Solid cage made of glass-fiber reinforced polyamid PA66 | Not recorded | Without — Bearing not greased |
| FAG 7215-B-XL-TVP-UB | Without — Not sealed | PN — Normal (ISO 492:2023) | Not recorded | TVP — Solid cage made of glass-fiber reinforced polyamid PA66 | Not recorded | Without — Bearing not greased |
| FAG 7215-B-XL-TVP-UO | Without — Not sealed | PN — Normal (ISO 492:2023) | Not recorded | TVP — Solid cage made of glass-fiber reinforced polyamid PA66 | Not recorded | Without — Bearing not greased |
| TIMKEN 7215WN | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 7215WNSU | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| NSK 7215AW | Not recorded | Not recorded | Not recorded | Pressed steel | Not recorded | Not recorded |
| NSK 7215AWDB | Not recorded | Not recorded | Not recorded | Pressed steel | Not recorded | Not recorded |
| NSK 7215AWDF | Not recorded | Not recorded | Not recorded | Pressed steel | Not recorded | Not recorded |
| NSK 7215AWDT | Not recorded | Not recorded | Not recorded | Pressed steel | Not recorded | Not recorded |
| NSK 7215BEAT85 | Not recorded | Not recorded | Not recorded | Polyamide 46 resin | Not recorded | Not recorded |
| NSK 7215BW | Not recorded | Not recorded | Not recorded | Pressed steel | Not recorded | Not recorded |
| NSK 7215BWDB | Not recorded | Not recorded | Not recorded | Pressed steel | Not recorded | Not recorded |
| NSK 7215BWDF | Not recorded | Not recorded | Not recorded | Pressed steel | Not recorded | Not recorded |
| NSK 7215BWDT | Not recorded | Not recorded | Not recorded | Pressed steel | Not recorded | Not recorded |
| KOYO 7215B | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 7215BDB | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 7215BDB FY | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 7215BDF | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 7215BDF FY | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 7215BDT | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 7215BDT FY | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 7215B FY | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 7215C | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 7215CDB | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 7215CDB FY | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 7215CDF | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 7215CDF FY | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 7215CDT | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 7215CDT FY | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 7215C FY | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 7215DB | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 7215DB FY | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 7215DF | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 7215DF FY | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 7215DT | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 7215DT FY | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 7215 FY | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
How to compare these values
- Use the displayed dimension names and original symbols. Housing length L, height H2 and flange width are not bearing outside diameter D. A catalogue width with an unverified symbol must not be assumed to be inner-ring width B or assembly width T. Open the product record for mounting dimensions and geometry.
- Inch values are calculated from the recorded millimetres using 25.4 mm per inch, rounded to six decimal places. They do not change a metric bearing into an inch-series bearing. Gram values are converted from the recorded mass in kilograms.
- C and C0 describe different rating conditions. They are not a single safe working-load limit and cannot replace an application load calculation.
- Reference and limiting speeds are separate catalogue values. The source grease/oil context is shown where recorded. Lubricant, seals, loads, fit, clearance and cooling affect the usable operating speed.
- A common base number does not prove equivalent seals, clearance, precision, material or interchangeability. Open the full designation for these fields.
Related prefix matches — other model numbers may appear
These discovery results can contain a longer number or a different component. They are not specifications for the requested exact model. Open the complete product to inspect its original geometry.
KOYO
7215
Angular contact ball bearing
View full technical record →SKF7215 ACDGA/HCP4A
Super-precision, high-capacity, universally matchable single row angular contact ball bearing
View full technical record →SKF7215 ACDGA/P4A
Super-precision, high-capacity, universally matchable single row angular contact ball bearing
View full technical record →SKF7215 ACDGB/P4A
Super-precision, high-capacity, universally matchable single row angular contact ball bearing
View full technical record →SKF7215 ACDGC/P4A
Super-precision, high-capacity, universally matchable single row angular contact ball bearing
View full technical record →SKF7215 ACD/P4A
Super-precision, high-capacity, single row angular contact ball bearing
View full technical record →SKF7215 ACD/P4ADBA
Matched set of two super-precision, high-capacity, D design, single row angular contact ball bearings
View full technical record →SKF7215 ACD/P4ADFA
Matched set of two super-precision, high-capacity, D design, single row angular contact ball bearings
View full technical record →SKF7215 ACD/P4ADGA
Matched set of two super-precision, high-capacity, D design, single row angular contact ball bearings
View full technical record →SKF7215 ACD/P4AQBCC
Matched set of four super-precision, high-capacity, D design, single row angular contact ball bearings
View full technical record →SKF7215 ACD/P4AQBTC
Matched set of four super-precision, high-capacity, D design, single row angular contact ball bearings
View full technical record →SKF7215 ACD/P4ATGA
Matched set of three super-precision, high-capacity, D design, single row angular contact ball bearings
View full technical record →Check the drawing before substituting
Nominal dimensions are not shaft-fit tolerances. Different variants can add grooves, flanges, wider rings or assembly components. When the table has different dimensions, the complete designation—not the shared prefix—controls.
Reference basis & data limits
Manufacturer terminology is retained in the product records. Technical reference basis: JTEKT Basic Bearing Knowledge (boundary dimensions, tolerance classes and lubrication); NSK Bearing ABCs (lubrication, designations and clearance); NTN technical FAQs (closure codes and component interchange); SKF rolling-bearing selection and maintenance references.
Selection workflows and catalogue grouping are BearingScope editorial aids. Verify the current drawing and application requirements before using a candidate. Missing database information is not converted into an assumed match.