99,016 bearing records · search, filter and compare

info@bearingscope.com
Find · understand · compare

7214 bearing dimensions & suffix variants

Look up recorded dimensions for designations beginning with 7214. The table retains complete manufacturer designations so special suffixes and different dimensional variants remain visible.

On this page5 sections

Find by measured dimensions

Enter bore d, outside diameter D and width B. Use decimals or inch fractions such as 1/2 or 1 1/4.

For tapered assemblies use total width T; for units or flanged bearings also check the mounting drawing.

Exact model evidence

7214 dimensions and recorded technical data

The recorded 7214 base designation measures 70×125×24 mm (inside diameter d × outside diameter D × width B). This answer uses unsuffixed records from KOYO. It does not assign the same dimensions or operating ratings to every suffix.

The numeric series boundary is preserved: a longer number is not included merely because its first digits match. 98 recorded variants are listed. A dash means the value is missing, not zero.

Brand / full designationNamed dimensions (mm / in)Dynamic C (kN)Static C0 (kN)Reference speed (rpm)Limiting speed (rpm)Mass (kg / g)
KOYO7214Angular contact ball bearing
Bore diameter (d)
70 mm
2.755906 in
Outside diameter (D)
125 mm
4.92126 in
Width (B)
24 mm
0.944882 in
95.4 kN63.5 kN—4800 rpmLimiting Speeds(Grease Lub.): 4800 min-1Limiting Speeds(Oil Lub.): 6000 min-11.12 kg1120 g
SKF7214 ACCBMSingle row angular contact ball bearing with 25° contact angle
Bore diameter (d)
70 mm
2.755906 in
Outside diameter (D)
125 mm
4.92126 in
Width (B)
24 mm
0.944882 in
83 kN68 kN6700 rpm10000 rpm1.17 kg1170 g
SKF7214 ACDGA/HCP4ASuper-precision, high-capacity, universally matchable single row angular contact ball bearing
Bore diameter (d)
70 mm
2.755906 in
Outside diameter (D)
125 mm
4.92126 in
Width (B)
24 mm
0.944882 in
66.3 kN55 kN——0.938 kg938 g
SKF7214 ACDGA/P4ASuper-precision, high-capacity, universally matchable single row angular contact ball bearing
Bore diameter (d)
70 mm
2.755906 in
Outside diameter (D)
125 mm
4.92126 in
Width (B)
24 mm
0.944882 in
66.3 kN55 kN——1.09 kg1090 g
SKF7214 ACDGAT/P4ASuper-precision angular contact ball bearing, universally matchable
Recorded bore (d)
—
Recorded outside dimension (D)
—
Catalogue width (symbol unverified)
—
————1.08 kg1080 g
SKF7214 ACDGB/HCP4ASuper-precision, high-capacity, universally matchable single row angular contact ball bearing
Bore diameter (d)
70 mm
2.755906 in
Outside diameter (D)
125 mm
4.92126 in
Width (B)
24 mm
0.944882 in
66.3 kN55 kN——0.938 kg938 g
SKF7214 ACDGB/P4ASuper-precision, high-capacity, universally matchable single row angular contact ball bearing
Bore diameter (d)
70 mm
2.755906 in
Outside diameter (D)
125 mm
4.92126 in
Width (B)
24 mm
0.944882 in
66.3 kN55 kN——1.09 kg1090 g
SKF7214 ACDGC/P4ASuper-precision, high-capacity, universally matchable single row angular contact ball bearing
Bore diameter (d)
70 mm
2.755906 in
Outside diameter (D)
125 mm
4.92126 in
Width (B)
24 mm
0.944882 in
66.3 kN55 kN——1.09 kg1090 g
SKF7214 ACD/HCP4ASuper-precision, high-capacity, single row angular contact ball bearing
Bore diameter (d)
70 mm
2.755906 in
Outside diameter (D)
125 mm
4.92126 in
Width (B)
24 mm
0.944882 in
66.3 kN55 kN——0.938 kg938 g
SKF7214 ACD/HCP4ADGAMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
70 mm
2.755906 in
Outside diameter (D)
125 mm
4.92126 in
Width (B)
48 mm
1.889764 in
108 kN110 kN——2.18 kg2180 g
SKF7214 ACD/HCP4AQBCBMatched set of four super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
70 mm
2.755906 in
Outside diameter (D)
125 mm
4.92126 in
Width (B)
96 mm
3.779528 in
174 kN220 kN——3.75 kg3750 g
SKF7214 ACD/P4ASuper-precision, high-capacity, single row angular contact ball bearing
Bore diameter (d)
70 mm
2.755906 in
Outside diameter (D)
125 mm
4.92126 in
Width (B)
24 mm
0.944882 in
66.3 kN55 kN——1.09 kg1090 g
SKF7214 ACD/P4ADBAMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
70 mm
2.755906 in
Outside diameter (D)
125 mm
4.92126 in
Width (B)
48 mm
1.889764 in
108 kN110 kN——2.18 kg2180 g
SKF7214 ACD/P4ADBBMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
70 mm
2.755906 in
Outside diameter (D)
125 mm
4.92126 in
Width (B)
48 mm
1.889764 in
108 kN110 kN——2.18 kg2180 g
SKF7214 ACD/P4ADBCMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
70 mm
2.755906 in
Outside diameter (D)
125 mm
4.92126 in
Width (B)
48 mm
1.889764 in
108 kN110 kN——2.18 kg2180 g
SKF7214 ACD/P4ADFAMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
70 mm
2.755906 in
Outside diameter (D)
125 mm
4.92126 in
Width (B)
48 mm
1.889764 in
108 kN110 kN——2.18 kg2180 g
SKF7214 ACD/P4ADFBMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
70 mm
2.755906 in
Outside diameter (D)
125 mm
4.92126 in
Width (B)
48 mm
1.889764 in
108 kN110 kN——2.18 kg2180 g
SKF7214 ACD/P4ADGAMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
70 mm
2.755906 in
Outside diameter (D)
125 mm
4.92126 in
Width (B)
48 mm
1.889764 in
108 kN110 kN——2.18 kg2180 g
SKF7214 ACD/P4ADGBMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
70 mm
2.755906 in
Outside diameter (D)
125 mm
4.92126 in
Width (B)
48 mm
1.889764 in
108 kN110 kN——2.18 kg2180 g
SKF7214 ACD/P4ADGCMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
70 mm
2.755906 in
Outside diameter (D)
125 mm
4.92126 in
Width (B)
48 mm
1.889764 in
108 kN110 kN——2.18 kg2180 g
SKF7214 ACD/P4ADTMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
70 mm
2.755906 in
Outside diameter (D)
125 mm
4.92126 in
Width (B)
48 mm
1.889764 in
108 kN110 kN——2.18 kg2180 g
SKF7214 ACD/P4ATBTBMatched set of three super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
70 mm
2.755906 in
Outside diameter (D)
125 mm
4.92126 in
Width (B)
72 mm
2.834646 in
143 kN166 kN——3.27 kg3270 g
SKF7214 BECBJSingle row angular contact ball bearing
Bore diameter (d)
70 mm
2.755906 in
Outside diameter (D)
125 mm
4.92126 in
Width (B)
24 mm
0.944882 in
72 kN60 kN6300 rpm6300 rpm1.14 kg1140 g
SKF7214 BECBMSingle row angular contact ball bearing
Bore diameter (d)
70 mm
2.755906 in
Outside diameter (D)
125 mm
4.92126 in
Width (B)
24 mm
0.944882 in
72 kN60 kN6300 rpm8500 rpm1.17 kg1170 g
SKF7214 BECBM/W64Single row angular contact ball bearing
Recorded bore (d)
70 mm
2.755906 in
Recorded outside dimension (D)
125 mm
4.92126 in
Catalogue width (symbol unverified)
24 mm
0.944882 in
67.6 kN56 kN—400 rpm1.17 kg1170 g
SKF7214 BECBPSingle row angular contact ball bearing
Bore diameter (d)
70 mm
2.755906 in
Outside diameter (D)
125 mm
4.92126 in
Width (B)
24 mm
0.944882 in
72 kN60 kN6300 rpm6300 rpm1.06 kg1060 g
SKF7214 BECBPHSingle row angular contact ball bearing
Bore diameter (d)
70 mm
2.755906 in
Outside diameter (D)
125 mm
4.92126 in
Width (B)
24 mm
0.944882 in
72 kN60 kN6300 rpm6300 rpm1.06 kg1060 g
SKF7214 BECBYSingle row angular contact ball bearing
Bore diameter (d)
70 mm
2.755906 in
Outside diameter (D)
125 mm
4.92126 in
Width (B)
24 mm
0.944882 in
72 kN60 kN6300 rpm6300 rpm1.11 kg1110 g
SKF7214 BEGAFSingle row angular contact ball bearing
Bore diameter (d)
70 mm
2.755906 in
Outside diameter (D)
125 mm
4.92126 in
Width (B)
24 mm
0.944882 in
67.6 kN56 kN6300 rpm6000 rpm1.18 kg1180 g
SKF7214 BEGAMSingle row angular contact ball bearing
Bore diameter (d)
70 mm
2.755906 in
Outside diameter (D)
125 mm
4.92126 in
Width (B)
24 mm
0.944882 in
72 kN60 kN6300 rpm8500 rpm1.17 kg1170 g
SKF7214 BEGAPSingle row angular contact ball bearing
Bore diameter (d)
70 mm
2.755906 in
Outside diameter (D)
125 mm
4.92126 in
Width (B)
24 mm
0.944882 in
72 kN60 kN6300 rpm6300 rpm1.06 kg1060 g
SKF7214 BEM1/VQ335Single row angular contact ball bearing
Recorded bore (d)
70 mm
2.755906 in
Recorded outside dimension (D)
125 mm
4.92126 in
Catalogue width (symbol unverified)
24 mm
0.944882 in
67.6 kN56 kN6300 rpm6300 rpm1.19 kg1190 g
SKF7214 BEPSingle row angular contact ball bearing
Bore diameter (d)
70 mm
2.755906 in
Outside diameter (D)
125 mm
4.92126 in
Width (B)
24 mm
0.944882 in
67.6 kN56 kN6300 rpm6000 rpm1.06 kg1060 g
SKF7214 CDGA/HCP4ASuper-precision, high-capacity, universally matchable single row angular contact ball bearing
Bore diameter (d)
70 mm
2.755906 in
Outside diameter (D)
125 mm
4.92126 in
Width (B)
24 mm
0.944882 in
68.9 kN58.5 kN——0.938 kg938 g
SKF7214 CDGA/P4ASuper-precision, high-capacity, universally matchable single row angular contact ball bearing
Bore diameter (d)
70 mm
2.755906 in
Outside diameter (D)
125 mm
4.92126 in
Width (B)
24 mm
0.944882 in
68.9 kN58.5 kN——1.09 kg1090 g
SKF7214 CDGB/P4ASuper-precision, high-capacity, universally matchable single row angular contact ball bearing
Bore diameter (d)
70 mm
2.755906 in
Outside diameter (D)
125 mm
4.92126 in
Width (B)
24 mm
0.944882 in
68.9 kN58.5 kN——1.09 kg1090 g
SKF7214 CDGC/P4ASuper-precision, high-capacity, universally matchable single row angular contact ball bearing
Bore diameter (d)
70 mm
2.755906 in
Outside diameter (D)
125 mm
4.92126 in
Width (B)
24 mm
0.944882 in
68.9 kN58.5 kN——1.09 kg1090 g
SKF7214 CD/HCP4ASuper-precision, high-capacity, single row angular contact ball bearing
Bore diameter (d)
70 mm
2.755906 in
Outside diameter (D)
125 mm
4.92126 in
Width (B)
24 mm
0.944882 in
68.9 kN58.5 kN——0.938 kg938 g
SKF7214 CD/HCP4ADBAMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
70 mm
2.755906 in
Outside diameter (D)
125 mm
4.92126 in
Width (B)
48 mm
1.889764 in
112 kN116 kN——1.88 kg1880 g
SKF7214 CD/HCP4ADGAMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
70 mm
2.755906 in
Outside diameter (D)
125 mm
4.92126 in
Width (B)
48 mm
1.889764 in
112 kN116 kN——1.88 kg1880 g
SKF7214 CD/P4ASuper-precision, high-capacity, single row angular contact ball bearing
Bore diameter (d)
70 mm
2.755906 in
Outside diameter (D)
125 mm
4.92126 in
Width (B)
24 mm
0.944882 in
68.9 kN58.5 kN——1.09 kg1090 g
SKF7214 CD/P4ADBAMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
70 mm
2.755906 in
Outside diameter (D)
125 mm
4.92126 in
Width (B)
48 mm
1.889764 in
112 kN116 kN——2.18 kg2180 g
SKF7214 CD/P4ADBCMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
70 mm
2.755906 in
Outside diameter (D)
125 mm
4.92126 in
Width (B)
48 mm
1.889764 in
112 kN116 kN——2.18 kg2180 g
SKF7214 CD/P4ADGAMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
70 mm
2.755906 in
Outside diameter (D)
125 mm
4.92126 in
Width (B)
48 mm
1.889764 in
112 kN116 kN——2.18 kg2180 g
SKF7214 CD/P4ADGBMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
70 mm
2.755906 in
Outside diameter (D)
125 mm
4.92126 in
Width (B)
48 mm
1.889764 in
112 kN116 kN——2.18 kg2180 g
SKF7214 CD/P4ADGCMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
70 mm
2.755906 in
Outside diameter (D)
125 mm
4.92126 in
Width (B)
48 mm
1.889764 in
112 kN116 kN——2.18 kg2180 g
SKF7214 CD/P4AQBCAMatched set of four super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
70 mm
2.755906 in
Outside diameter (D)
125 mm
4.92126 in
Width (B)
96 mm
3.779528 in
182 kN232 kN——4.36 kg4360 g
FAG7214-B-XL-2RS-TVPAngular contact ball bearing
Bore diameter (d)
70 mm
2.755906 in
Outside diameter (D)
125 mm
4.92126 in
Width (B)
24 mm
0.944882 in
74 kN62 kN—3000 rpm1.132 kg1132 g
FAG7214-B-XL-2RS-TVP-L055Angular contact ball bearing
Bore diameter (d)
70 mm
2.755906 in
Outside diameter (D)
125 mm
4.92126 in
Width (B)
24 mm
0.944882 in
74 kN62 kN—3000 rpm1.08 kg1080 g
FAG7214-B-XL-2RS-TVP-ULAngular contact ball bearing
Bore diameter (d)
70 mm
2.755906 in
Outside diameter (D)
125 mm
4.92126 in
Width (B)
24 mm
0.944882 in
74 kN62 kN—3000 rpm1.081 kg1081 g
FAG7214-B-XL-JPAngular contact ball bearing
Bore diameter (d)
70 mm
2.755906 in
Outside diameter (D)
125 mm
4.92126 in
Width (B)
24 mm
0.944882 in
74 kN62 kN5400 rpm7200 rpm1.152 kg1152 g
FAG7214-B-XL-JP-UAAngular contact ball bearing
Bore diameter (d)
70 mm
2.755906 in
Outside diameter (D)
125 mm
4.92126 in
Width (B)
24 mm
0.944882 in
74 kN62 kN5400 rpm7200 rpm1.13 kg1130 g
FAG7214-B-XL-JP-UOAngular contact ball bearing
Bore diameter (d)
70 mm
2.755906 in
Outside diameter (D)
125 mm
4.92126 in
Width (B)
24 mm
0.944882 in
74 kN62 kN5400 rpm7200 rpm1.2 kg1200 g
FAG7214-B-XL-MPAngular contact ball bearing
Bore diameter (d)
70 mm
2.755906 in
Outside diameter (D)
125 mm
4.92126 in
Width (B)
24 mm
0.944882 in
71 kN58 kN5500 rpm9400 rpm1.207 kg1207 g
FAG7214-B-XL-MP-UAAngular contact ball bearing
Bore diameter (d)
70 mm
2.755906 in
Outside diameter (D)
125 mm
4.92126 in
Width (B)
24 mm
0.944882 in
71 kN58 kN5500 rpm9400 rpm1.215 kg1215 g
FAG7214-B-XL-MP-UBAngular contact ball bearing
Bore diameter (d)
70 mm
2.755906 in
Outside diameter (D)
125 mm
4.92126 in
Width (B)
24 mm
0.944882 in
71 kN58 kN5500 rpm9400 rpm1.215 kg1215 g
FAG7214-B-XL-MP-UOAngular contact ball bearing
Bore diameter (d)
70 mm
2.755906 in
Outside diameter (D)
125 mm
4.92126 in
Width (B)
24 mm
0.944882 in
71 kN58 kN5500 rpm9400 rpm1.215 kg1215 g
FAG7214-B-XL-TVPAngular contact ball bearing
Bore diameter (d)
70 mm
2.755906 in
Outside diameter (D)
125 mm
4.92126 in
Width (B)
24 mm
0.944882 in
74 kN62 kN5400 rpm7200 rpm1.09 kg1090 g
FAG7214-B-XL-TVP-P5-UAAngular contact ball bearing
Bore diameter (d)
70 mm
2.755906 in
Outside diameter (D)
125 mm
4.92126 in
Width (B)
24 mm
0.944882 in
74 kN62 kN5400 rpm7200 rpm1.08 kg1080 g
FAG7214-B-XL-TVP-P5-ULAngular contact ball bearing
Bore diameter (d)
70 mm
2.755906 in
Outside diameter (D)
125 mm
4.92126 in
Width (B)
24 mm
0.944882 in
74 kN62 kN5400 rpm7200 rpm1.1 kg1100 g
FAG7214-B-XL-TVP-P5-UOAngular contact ball bearing
Bore diameter (d)
70 mm
2.755906 in
Outside diameter (D)
125 mm
4.92126 in
Width (B)
24 mm
0.944882 in
74 kN62 kN5400 rpm7200 rpm1.08 kg1080 g
FAG7214-B-XL-TVP-UAAngular contact ball bearing
Bore diameter (d)
70 mm
2.755906 in
Outside diameter (D)
125 mm
4.92126 in
Width (B)
24 mm
0.944882 in
74 kN62 kN5400 rpm7200 rpm1.09 kg1090 g
FAG7214-B-XL-TVP-UBAngular contact ball bearing
Bore diameter (d)
70 mm
2.755906 in
Outside diameter (D)
125 mm
4.92126 in
Width (B)
24 mm
0.944882 in
74 kN62 kN5400 rpm7200 rpm1.08 kg1080 g
FAG7214-B-XL-TVP-UOAngular contact ball bearing
Bore diameter (d)
70 mm
2.755906 in
Outside diameter (D)
125 mm
4.92126 in
Width (B)
24 mm
0.944882 in
74 kN62 kN5400 rpm7200 rpm1.1 kg1100 g
TIMKEN7214WNAngular contact ball bearing
Recorded bore (d)
70 mm
2.755906 in
Recorded outside dimension (D)
125 mm
4.92126 in
Catalogue width (symbol unverified)
24 mm
0.944882 in
69 kN57.8 kN——1.17 kg1170 g
TIMKEN7214WNSUAngular contact ball bearing
Recorded bore (d)
70 mm
2.755906 in
Recorded outside dimension (D)
125 mm
4.92126 in
Catalogue width (symbol unverified)
24 mm
0.944882 in
69 kN57.8 kN——1.17 kg1170 g
NSK7214AWAngular contact ball bearing
Bore diameter (d)
70 mm
2.755906 in
Outside diameter (D)
125 mm
4.92126 in
Individual bearing width (B)
24 mm
0.944882 in
84 kN63.5 kN——1.11 kg1110 g
NSK7214AWDBAngular contact ball bearing
Bore diameter (d)
70 mm
2.755906 in
Outside diameter (D)
125 mm
4.92126 in
Catalogue width (symbol unverified)
48 mm
1.889764 in
136 kN127 kN———
NSK7214AWDFAngular contact ball bearing
Bore diameter (d)
70 mm
2.755906 in
Outside diameter (D)
125 mm
4.92126 in
Catalogue width (symbol unverified)
48 mm
1.889764 in
136 kN127 kN———
NSK7214AWDTAngular contact ball bearing
Bore diameter (d)
70 mm
2.755906 in
Outside diameter (D)
125 mm
4.92126 in
Catalogue width (symbol unverified)
48 mm
1.889764 in
136 kN127 kN———
NSK7214BEAT85Angular contact ball bearing
Bore diameter (d)
70 mm
2.755906 in
Outside diameter (D)
125 mm
4.92126 in
Individual bearing width (B)
24 mm
0.944882 in
79.5 kN58.5 kN——1.08 kg1080 g
NSK7214BWAngular contact ball bearing
Bore diameter (d)
70 mm
2.755906 in
Outside diameter (D)
125 mm
4.92126 in
Individual bearing width (B)
24 mm
0.944882 in
76 kN58 kN——1.14 kg1140 g
NSK7214BWDBAngular contact ball bearing
Bore diameter (d)
70 mm
2.755906 in
Outside diameter (D)
125 mm
4.92126 in
Catalogue width (symbol unverified)
48 mm
1.889764 in
124 kN116 kN———
NSK7214BWDFAngular contact ball bearing
Bore diameter (d)
70 mm
2.755906 in
Outside diameter (D)
125 mm
4.92126 in
Catalogue width (symbol unverified)
48 mm
1.889764 in
124 kN116 kN———
NSK7214BWDTAngular contact ball bearing
Bore diameter (d)
70 mm
2.755906 in
Outside diameter (D)
125 mm
4.92126 in
Catalogue width (symbol unverified)
48 mm
1.889764 in
124 kN116 kN———
KOYO7214BAngular contact ball bearing
Bore diameter (d)
70 mm
2.755906 in
Outside diameter (D)
125 mm
4.92126 in
Width (B)
24 mm
0.944882 in
86.4 kN57.8 kN—3600 rpmLimiting Speeds(Grease Lub.): 3600 min-1Limiting Speeds(Oil Lub.): 4800 min-11.12 kg1120 g
KOYO7214BDBAngular contact ball bearing
Bore diameter (d)
70 mm
2.755906 in
Outside diameter (D)
125 mm
4.92126 in
Width (B)
48 mm
1.889764 in
140 kN116 kN—2900 rpmLimiting Speeds(Grease Lub.): 2900 min-1Limiting Speeds(Oil Lub.): 3900 min-12.24 kg2240 g
KOYO7214BDB FYAngular contact ball bearing
Bore diameter (d)
70 mm
2.755906 in
Outside diameter (D)
125 mm
4.92126 in
Width (B)
48 mm
1.889764 in
128 kN101 kN—3700 rpmLimiting Speeds(Grease Lub.): 3700 min-1Limiting Speeds(Oil Lub.): 4900 min-12.24 kg2240 g
KOYO7214BDFAngular contact ball bearing
Bore diameter (d)
70 mm
2.755906 in
Outside diameter (D)
125 mm
4.92126 in
Width (B)
48 mm
1.889764 in
140 kN116 kN—2900 rpmLimiting Speeds(Grease Lub.): 2900 min-1Limiting Speeds(Oil Lub.): 3900 min-12.24 kg2240 g
KOYO7214BDF FYAngular contact ball bearing
Bore diameter (d)
70 mm
2.755906 in
Outside diameter (D)
125 mm
4.92126 in
Width (B)
48 mm
1.889764 in
128 kN101 kN—3700 rpmLimiting Speeds(Grease Lub.): 3700 min-1Limiting Speeds(Oil Lub.): 4900 min-12.24 kg2240 g
KOYO7214BDTAngular contact ball bearing
Bore diameter (d)
70 mm
2.755906 in
Outside diameter (D)
125 mm
4.92126 in
Width (B)
48 mm
1.889764 in
140 kN116 kN—2900 rpmLimiting Speeds(Grease Lub.): 2900 min-1Limiting Speeds(Oil Lub.): 3900 min-12.24 kg2240 g
KOYO7214BDT FYAngular contact ball bearing
Bore diameter (d)
70 mm
2.755906 in
Outside diameter (D)
125 mm
4.92126 in
Width (B)
48 mm
1.889764 in
128 kN101 kN—3700 rpmLimiting Speeds(Grease Lub.): 3700 min-1Limiting Speeds(Oil Lub.): 4900 min-12.24 kg2240 g
KOYO7214B FYAngular contact ball bearing
Bore diameter (d)
70 mm
2.755906 in
Outside diameter (D)
125 mm
4.92126 in
Width (B)
24 mm
0.944882 in
79 kN50.6 kN—4600 rpmLimiting Speeds(Grease Lub.): 4600 min-1Limiting Speeds(Oil Lub.): 6100 min-11.12 kg1120 g
KOYO7214CAngular contact ball bearing
Bore diameter (d)
70 mm
2.755906 in
Outside diameter (D)
125 mm
4.92126 in
Width (B)
24 mm
0.944882 in
104 kN68.8 kN—6700 rpmLimiting Speeds(Grease Lub.): 6700 min-1Limiting Speeds(Oil Lub.): 8800 min-11.12 kg1120 g
KOYO7214CDBAngular contact ball bearing
Bore diameter (d)
70 mm
2.755906 in
Outside diameter (D)
125 mm
4.92126 in
Width (B)
48 mm
1.889764 in
168 kN138 kN—5300 rpmLimiting Speeds(Grease Lub.): 5300 min-1Limiting Speeds(Oil Lub.): 7100 min-12.24 kg2240 g
KOYO7214CDB FYAngular contact ball bearing
Bore diameter (d)
70 mm
2.755906 in
Outside diameter (D)
125 mm
4.92126 in
Width (B)
48 mm
1.889764 in
154 kN120 kN—6700 rpmLimiting Speeds(Grease Lub.): 6700 min-1Limiting Speeds(Oil Lub.): 8900 min-12.24 kg2240 g
KOYO7214CDFAngular contact ball bearing
Bore diameter (d)
70 mm
2.755906 in
Outside diameter (D)
125 mm
4.92126 in
Width (B)
48 mm
1.889764 in
168 kN138 kN—5300 rpmLimiting Speeds(Grease Lub.): 5300 min-1Limiting Speeds(Oil Lub.): 7100 min-12.24 kg2240 g
KOYO7214CDF FYAngular contact ball bearing
Bore diameter (d)
70 mm
2.755906 in
Outside diameter (D)
125 mm
4.92126 in
Width (B)
48 mm
1.889764 in
154 kN120 kN—6700 rpmLimiting Speeds(Grease Lub.): 6700 min-1Limiting Speeds(Oil Lub.): 8900 min-12.24 kg2240 g
KOYO7214CDTAngular contact ball bearing
Bore diameter (d)
70 mm
2.755906 in
Outside diameter (D)
125 mm
4.92126 in
Width (B)
48 mm
1.889764 in
168 kN138 kN—5300 rpmLimiting Speeds(Grease Lub.): 5300 min-1Limiting Speeds(Oil Lub.): 7100 min-12.24 kg2240 g
KOYO7214CDT FYAngular contact ball bearing
Bore diameter (d)
70 mm
2.755906 in
Outside diameter (D)
125 mm
4.92126 in
Width (B)
48 mm
1.889764 in
154 kN120 kN—6700 rpmLimiting Speeds(Grease Lub.): 6700 min-1Limiting Speeds(Oil Lub.): 8900 min-12.24 kg2240 g
KOYO7214C FYAngular contact ball bearing
Bore diameter (d)
70 mm
2.755906 in
Outside diameter (D)
125 mm
4.92126 in
Width (B)
24 mm
0.944882 in
94.9 kN60.2 kN—8400 rpmLimiting Speeds(Grease Lub.): 8400 min-1Limiting Speeds(Oil Lub.): 11000 min-11.12 kg1120 g
KOYO7214DBAngular contact ball bearing
Bore diameter (d)
70 mm
2.755906 in
Outside diameter (D)
125 mm
4.92126 in
Width (B)
48 mm
1.889764 in
155 kN127 kN—3900 rpmLimiting Speeds(Grease Lub.): 3900 min-1Limiting Speeds(Oil Lub.): 4800 min-12.24 kg2240 g
KOYO7214DB FYAngular contact ball bearing
Bore diameter (d)
70 mm
2.755906 in
Outside diameter (D)
125 mm
4.92126 in
Width (B)
48 mm
1.889764 in
142 kN111 kN—4900 rpmLimiting Speeds(Grease Lub.): 4900 min-1Limiting Speeds(Oil Lub.): 6100 min-12.24 kg2240 g
KOYO7214DFAngular contact ball bearing
Bore diameter (d)
70 mm
2.755906 in
Outside diameter (D)
125 mm
4.92126 in
Width (B)
48 mm
1.889764 in
155 kN127 kN—3900 rpmLimiting Speeds(Grease Lub.): 3900 min-1Limiting Speeds(Oil Lub.): 4800 min-12.24 kg2240 g
KOYO7214DF FYAngular contact ball bearing
Bore diameter (d)
70 mm
2.755906 in
Outside diameter (D)
125 mm
4.92126 in
Width (B)
48 mm
1.889764 in
142 kN111 kN—4900 rpmLimiting Speeds(Grease Lub.): 4900 min-1Limiting Speeds(Oil Lub.): 6100 min-12.24 kg2240 g
KOYO7214DTAngular contact ball bearing
Bore diameter (d)
70 mm
2.755906 in
Outside diameter (D)
125 mm
4.92126 in
Width (B)
48 mm
1.889764 in
155 kN127 kN—3900 rpmLimiting Speeds(Grease Lub.): 3900 min-1Limiting Speeds(Oil Lub.): 4800 min-12.24 kg2240 g
KOYO7214DT FYAngular contact ball bearing
Bore diameter (d)
70 mm
2.755906 in
Outside diameter (D)
125 mm
4.92126 in
Width (B)
48 mm
1.889764 in
142 kN111 kN—4900 rpmLimiting Speeds(Grease Lub.): 4900 min-1Limiting Speeds(Oil Lub.): 6100 min-12.24 kg2240 g
KOYO7214 FYAngular contact ball bearing
Bore diameter (d)
70 mm
2.755906 in
Outside diameter (D)
125 mm
4.92126 in
Width (B)
24 mm
0.944882 in
87.3 kN55.6 kN—6100 rpmLimiting Speeds(Grease Lub.): 6100 min-1Limiting Speeds(Oil Lub.): 7600 min-11.12 kg1120 g
Compare recorded seals, clearance, precision and materials

Manufacturer wording is retained. A missing property is not inferred from another brand or a similar suffix.

Brand / designationClosureOriginal precisionClearanceCageMaterialLubricant
KOYO 7214Not recordedNot recordedNot recordedNot recordedNot recordedNot recorded
SKF 7214 ACCBMWithoutP6Not recordedMachined brassBearing steelNone
SKF 7214 ACDGA/HCP4AWithoutNot recordedNot recordedNot recordedHybrid (ceramic balls)None
SKF 7214 ACDGA/P4AWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7214 ACDGAT/P4ANot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
SKF 7214 ACDGB/HCP4AWithoutNot recordedNot recordedNot recordedHybrid (ceramic balls)None
SKF 7214 ACDGB/P4AWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7214 ACDGC/P4AWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7214 ACD/HCP4AWithoutNot recordedNot recordedNot recordedHybrid (ceramic balls)None
SKF 7214 ACD/HCP4ADGAWithoutNot recordedNot recordedNot recordedHybrid (ceramic balls)None
SKF 7214 ACD/HCP4AQBCBWithoutNot recordedNot recordedNot recordedHybrid (ceramic balls)None
SKF 7214 ACD/P4AWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7214 ACD/P4ADBAWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7214 ACD/P4ADBBWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7214 ACD/P4ADBCWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7214 ACD/P4ADFAWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7214 ACD/P4ADFBWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7214 ACD/P4ADGAWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7214 ACD/P4ADGBWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7214 ACD/P4ADGCWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7214 ACD/P4ADTWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7214 ACD/P4ATBTBWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7214 BECBJWithoutP6Not recordedSteel sheet metalBearing steelNone
SKF 7214 BECBMWithoutP6Not recordedMachined brassBearing steelNone
SKF 7214 BECBM/W64WithoutNot recordedNot recordedMachined brassBearing steelSolid Oil
SKF 7214 BECBPWithoutP6Not recordedNon-metallicBearing steelNone
SKF 7214 BECBPHWithoutP6Not recordedNon-metallicBearing steelNone
SKF 7214 BECBYWithoutP6Not recordedBrass sheet metalBearing steelNone
SKF 7214 BEGAFWithoutP6Not recordedMachined steelBearing steelNone
SKF 7214 BEGAMWithoutP6Not recordedMachined brassBearing steelNone
SKF 7214 BEGAPWithoutP6Not recordedNon-metallicBearing steelNone
SKF 7214 BEM1/VQ335WithoutNot recordedNot recordedMachined brassBearing steelNone
SKF 7214 BEPWithoutNormalNot recordedNon-metallicBearing steelNone
SKF 7214 CDGA/HCP4AWithoutNot recordedNot recordedNot recordedHybrid (ceramic balls)None
SKF 7214 CDGA/P4AWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7214 CDGB/P4AWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7214 CDGC/P4AWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7214 CD/HCP4AWithoutNot recordedNot recordedNot recordedHybrid (ceramic balls)None
SKF 7214 CD/HCP4ADBAWithoutNot recordedNot recordedNot recordedHybrid (ceramic balls)None
SKF 7214 CD/HCP4ADGAWithoutNot recordedNot recordedNot recordedHybrid (ceramic balls)None
SKF 7214 CD/P4AWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7214 CD/P4ADBAWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7214 CD/P4ADBCWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7214 CD/P4ADGAWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7214 CD/P4ADGBWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7214 CD/P4ADGCWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7214 CD/P4AQBCAWithoutNot recordedNot recordedNot recordedBearing steelNone
FAG 7214-B-XL-2RS-TVP2RS — Contact seal on both sidesPN — Normal (ISO 492:2023)Not recordedTVP — Solid cage made of glass-fiber reinforced polyamid PA66Not recordedGA13 — Ball bearing and insert bearing grease
FAG 7214-B-XL-2RS-TVP-L0552RS — Contact seal on both sidesPN — Normal (ISO 492:2023)Not recordedTVP — Solid cage made of glass-fiber reinforced polyamid PA66Not recordedL055 — Grease (L055/customer specific)
FAG 7214-B-XL-2RS-TVP-UL2RS — Contact seal on both sidesPN — Normal (ISO 492:2023)Not recordedTVP — Solid cage made of glass-fiber reinforced polyamid PA66Not recordedGA13 — Ball bearing and insert bearing grease
FAG 7214-B-XL-JPWithout — Not sealedPN — Normal (ISO 492:2023)Not recordedJP — Steel sheet metalNot recordedWithout — Bearing not greased
FAG 7214-B-XL-JP-UAWithout — Not sealedPN — Normal (ISO 492:2023)Not recordedJP — Steel sheet metalNot recordedWithout — Bearing not greased
FAG 7214-B-XL-JP-UOWithout — Not sealedPN — Normal (ISO 492:2023)Not recordedJP — Steel sheet metalNot recordedWithout — Bearing not greased
FAG 7214-B-XL-MPWithout — Not sealedPN — Normal (ISO 492:2023)Not recordedMP — Solid brass cage, ball guidedNot recordedWithout — Bearing not greased
FAG 7214-B-XL-MP-UAWithout — Not sealedPN — Normal (ISO 492:2023)Not recordedMP — Solid brass cage, ball guidedNot recordedWithout — Bearing not greased
FAG 7214-B-XL-MP-UBWithout — Not sealedPN — Normal (ISO 492:2023)Not recordedMP — Solid brass cage, ball guidedNot recordedWithout — Bearing not greased
FAG 7214-B-XL-MP-UOWithout — Not sealedPN — Normal (ISO 492:2023)Not recordedMP — Solid brass cage, ball guidedNot recordedWithout — Bearing not greased
FAG 7214-B-XL-TVPWithout — Not sealedPN — Normal (ISO 492:2023)Not recordedTVP — Solid cage made of glass-fiber reinforced polyamid PA66Not recordedWithout — Bearing not greased
FAG 7214-B-XL-TVP-P5-UAWithout — Not sealedP5 — Class 5 (ISO 492:2023)Not recordedTVP — Solid cage made of glass-fiber reinforced polyamid PA66Not recordedWithout — Bearing not greased
FAG 7214-B-XL-TVP-P5-ULWithout — Not sealedP5 — Class 5 (ISO 492:2023)Not recordedTVP — Solid cage made of glass-fiber reinforced polyamid PA66Not recordedWithout — Bearing not greased
FAG 7214-B-XL-TVP-P5-UOWithout — Not sealedP5 — Class 5 (ISO 492:2023)Not recordedTVP — Solid cage made of glass-fiber reinforced polyamid PA66Not recordedWithout — Bearing not greased
FAG 7214-B-XL-TVP-UAWithout — Not sealedPN — Normal (ISO 492:2023)Not recordedTVP — Solid cage made of glass-fiber reinforced polyamid PA66Not recordedWithout — Bearing not greased
FAG 7214-B-XL-TVP-UBWithout — Not sealedPN — Normal (ISO 492:2023)Not recordedTVP — Solid cage made of glass-fiber reinforced polyamid PA66Not recordedWithout — Bearing not greased
FAG 7214-B-XL-TVP-UOWithout — Not sealedPN — Normal (ISO 492:2023)Not recordedTVP — Solid cage made of glass-fiber reinforced polyamid PA66Not recordedWithout — Bearing not greased
TIMKEN 7214WNOpenNot recordedNot recordedBrass cageNot recordedNot recorded
TIMKEN 7214WNSUOpenNot recordedNot recordedBrass cageNot recordedNot recorded
NSK 7214AWNot recordedNot recordedNot recordedPressed steelNot recordedNot recorded
NSK 7214AWDBNot recordedNot recordedNot recordedPressed steelNot recordedNot recorded
NSK 7214AWDFNot recordedNot recordedNot recordedPressed steelNot recordedNot recorded
NSK 7214AWDTNot recordedNot recordedNot recordedPressed steelNot recordedNot recorded
NSK 7214BEAT85Not recordedNot recordedNot recordedPolyamide 46 resinNot recordedNot recorded
NSK 7214BWNot recordedNot recordedNot recordedPressed steelNot recordedNot recorded
NSK 7214BWDBNot recordedNot recordedNot recordedPressed steelNot recordedNot recorded
NSK 7214BWDFNot recordedNot recordedNot recordedPressed steelNot recordedNot recorded
NSK 7214BWDTNot recordedNot recordedNot recordedPressed steelNot recordedNot recorded
KOYO 7214BNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 7214BDBNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 7214BDB FYNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 7214BDFNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 7214BDF FYNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 7214BDTNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 7214BDT FYNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 7214B FYNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 7214CNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 7214CDBNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 7214CDB FYNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 7214CDFNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 7214CDF FYNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 7214CDTNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 7214CDT FYNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 7214C FYNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 7214DBNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 7214DB FYNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 7214DFNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 7214DF FYNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 7214DTNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 7214DT FYNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 7214 FYNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded

How to compare these values

  • Use the displayed dimension names and original symbols. Housing length L, height H2 and flange width are not bearing outside diameter D. A catalogue width with an unverified symbol must not be assumed to be inner-ring width B or assembly width T. Open the product record for mounting dimensions and geometry.
  • Inch values are calculated from the recorded millimetres using 25.4 mm per inch, rounded to six decimal places. They do not change a metric bearing into an inch-series bearing. Gram values are converted from the recorded mass in kilograms.
  • C and C0 describe different rating conditions. They are not a single safe working-load limit and cannot replace an application load calculation.
  • Reference and limiting speeds are separate catalogue values. The source grease/oil context is shown where recorded. Lubricant, seals, loads, fit, clearance and cooling affect the usable operating speed.
  • A common base number does not prove equivalent seals, clearance, precision, material or interchangeability. Open the full designation for these fields.
Check load calculations →Estimate rating life →Decode the complete marking →Check replacement evidence →

Related prefix matches — other model numbers may appear

These discovery results can contain a longer number or a different component. They are not specifications for the requested exact model. Open the complete product to inspect its original geometry.

KOYO

7214

Angular contact ball bearing

View full technical record →SKF

7214 ACCBM

Single row angular contact ball bearing with 25° contact angle

View full technical record →SKF

7214 ACDGA/HCP4A

Super-precision, high-capacity, universally matchable single row angular contact ball bearing

View full technical record →SKF

7214 ACDGA/P4A

Super-precision, high-capacity, universally matchable single row angular contact ball bearing

View full technical record →SKF

7214 ACDGAT/P4A

Super-precision angular contact ball bearing, universally matchable

View full technical record →SKF

7214 ACDGB/HCP4A

Super-precision, high-capacity, universally matchable single row angular contact ball bearing

View full technical record →SKF

7214 ACDGB/P4A

Super-precision, high-capacity, universally matchable single row angular contact ball bearing

View full technical record →SKF

7214 ACDGC/P4A

Super-precision, high-capacity, universally matchable single row angular contact ball bearing

View full technical record →SKF

7214 ACD/HCP4A

Super-precision, high-capacity, single row angular contact ball bearing

View full technical record →SKF

7214 ACD/HCP4ADGA

Matched set of two super-precision, high-capacity, D design, single row angular contact ball bearings

View full technical record →SKF

7214 ACD/HCP4AQBCB

Matched set of four super-precision, high-capacity, D design, single row angular contact ball bearings

View full technical record →SKF

7214 ACD/P4A

Super-precision, high-capacity, single row angular contact ball bearing

View full technical record →
Filter all 98 prefix results →

Check the drawing before substituting

Nominal dimensions are not shaft-fit tolerances. Different variants can add grooves, flanges, wider rings or assembly components. When the table has different dimensions, the complete designation—not the shared prefix—controls.

Measurement guide →Cross-reference checks →

Reference basis & data limits

Manufacturer terminology is retained in the product records. Technical reference basis: JTEKT Basic Bearing Knowledge (boundary dimensions, tolerance classes and lubrication); NSK Bearing ABCs (lubrication, designations and clearance); NTN technical FAQs (closure codes and component interchange); SKF rolling-bearing selection and maintenance references.

Selection workflows and catalogue grouping are BearingScope editorial aids. Verify the current drawing and application requirements before using a candidate. Missing database information is not converted into an assumed match.

Search the consolidated catalogue

Find, filter and compare bearing model data in one place.

Open model search