99,016 bearing records · search, filter and compare

info@bearingscope.com
Find · understand · compare

7211 bearing dimensions & suffix variants

Look up recorded dimensions for designations beginning with 7211. The table retains complete manufacturer designations so special suffixes and different dimensional variants remain visible.

On this page5 sections

Find by measured dimensions

Enter bore d, outside diameter D and width B. Use decimals or inch fractions such as 1/2 or 1 1/4.

For tapered assemblies use total width T; for units or flanged bearings also check the mounting drawing.

Exact model evidence

7211 dimensions and recorded technical data

The recorded 7211 base designation measures 55×100×21 mm (inside diameter d × outside diameter D × width B). This answer uses unsuffixed records from KOYO. It does not assign the same dimensions or operating ratings to every suffix.

The numeric series boundary is preserved: a longer number is not included merely because its first digits match. 104 recorded variants are listed. A dash means the value is missing, not zero.

Brand / full designationNamed dimensions (mm / in)Dynamic C (kN)Static C0 (kN)Reference speed (rpm)Limiting speed (rpm)Mass (kg / g)
KOYO7211Angular contact ball bearing
Bore diameter (d)
55 mm
2.165354 in
Outside diameter (D)
100 mm
3.937008 in
Width (B)
21 mm
0.826772 in
63.7 kN39.8 kN—6000 rpmLimiting Speeds(Grease Lub.): 6000 min-1Limiting Speeds(Oil Lub.): 7600 min-10.635 kg635 g
SKF7211 ACCBMSingle row angular contact ball bearing with 25° contact angle
Bore diameter (d)
55 mm
2.165354 in
Outside diameter (D)
100 mm
3.937008 in
Width (B)
21 mm
0.826772 in
57 kN45 kN8500 rpm13000 rpm0.654 kg654 g
SKF7211 ACDGA/HCP4ASuper-precision, high-capacity, universally matchable single row angular contact ball bearing
Bore diameter (d)
55 mm
2.165354 in
Outside diameter (D)
100 mm
3.937008 in
Width (B)
21 mm
0.826772 in
52.7 kN40.5 kN——0.499 kg499 g
SKF7211 ACDGA/P4ASuper-precision, high-capacity, universally matchable single row angular contact ball bearing
Bore diameter (d)
55 mm
2.165354 in
Outside diameter (D)
100 mm
3.937008 in
Width (B)
21 mm
0.826772 in
52.7 kN40.5 kN——0.603 kg603 g
SKF7211 ACDGB/HCP4ASuper-precision, high-capacity, universally matchable single row angular contact ball bearing
Bore diameter (d)
55 mm
2.165354 in
Outside diameter (D)
100 mm
3.937008 in
Width (B)
21 mm
0.826772 in
52.7 kN40.5 kN——0.499 kg499 g
SKF7211 ACDGB/P4ASuper-precision, high-capacity, universally matchable single row angular contact ball bearing
Bore diameter (d)
55 mm
2.165354 in
Outside diameter (D)
100 mm
3.937008 in
Width (B)
21 mm
0.826772 in
52.7 kN40.5 kN——0.603 kg603 g
SKF7211 ACDGC/P4ASuper-precision, high-capacity, universally matchable single row angular contact ball bearing
Bore diameter (d)
55 mm
2.165354 in
Outside diameter (D)
100 mm
3.937008 in
Width (B)
21 mm
0.826772 in
52.7 kN40.5 kN——0.603 kg603 g
SKF7211 ACD/HCP4ASuper-precision, high-capacity, single row angular contact ball bearing
Bore diameter (d)
55 mm
2.165354 in
Outside diameter (D)
100 mm
3.937008 in
Width (B)
21 mm
0.826772 in
52.7 kN40.5 kN——0.499 kg499 g
SKF7211 ACD/HCP4ADGBMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
55 mm
2.165354 in
Outside diameter (D)
100 mm
3.937008 in
Width (B)
42 mm
1.653543 in
85.2 kN81.5 kN——0.997 kg997 g
SKF7211 ACD/P4ASuper-precision, high-capacity, single row angular contact ball bearing
Bore diameter (d)
55 mm
2.165354 in
Outside diameter (D)
100 mm
3.937008 in
Width (B)
21 mm
0.826772 in
52.7 kN40.5 kN——0.603 kg603 g
SKF7211 ACD/P4ADBAMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
55 mm
2.165354 in
Outside diameter (D)
100 mm
3.937008 in
Width (B)
42 mm
1.653543 in
85.2 kN81.5 kN——1.21 kg1210 g
SKF7211 ACD/P4ADBBMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
55 mm
2.165354 in
Outside diameter (D)
100 mm
3.937008 in
Width (B)
42 mm
1.653543 in
85.2 kN81.5 kN——1.21 kg1210 g
SKF7211 ACD/P4ADBCMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
55 mm
2.165354 in
Outside diameter (D)
100 mm
3.937008 in
Width (B)
42 mm
1.653543 in
85.2 kN81.5 kN——1.21 kg1210 g
SKF7211 ACD/P4ADFAMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
55 mm
2.165354 in
Outside diameter (D)
100 mm
3.937008 in
Width (B)
42 mm
1.653543 in
85.2 kN81.5 kN——1.21 kg1210 g
SKF7211 ACD/P4ADFBMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
55 mm
2.165354 in
Outside diameter (D)
100 mm
3.937008 in
Width (B)
42 mm
1.653543 in
85.2 kN81.5 kN——1.21 kg1210 g
SKF7211 ACD/P4ADFCMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
55 mm
2.165354 in
Outside diameter (D)
100 mm
3.937008 in
Width (B)
42 mm
1.653543 in
85.2 kN81.5 kN——1.21 kg1210 g
SKF7211 ACD/P4ADGAMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
55 mm
2.165354 in
Outside diameter (D)
100 mm
3.937008 in
Width (B)
42 mm
1.653543 in
85.2 kN81.5 kN——1.21 kg1210 g
SKF7211 ACD/P4ADGBMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
55 mm
2.165354 in
Outside diameter (D)
100 mm
3.937008 in
Width (B)
42 mm
1.653543 in
85.2 kN81.5 kN——1.21 kg1210 g
SKF7211 ACD/P4ADGCMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
55 mm
2.165354 in
Outside diameter (D)
100 mm
3.937008 in
Width (B)
42 mm
1.653543 in
85.2 kN81.5 kN——1.21 kg1210 g
SKF7211 ACD/P4ADTMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
55 mm
2.165354 in
Outside diameter (D)
100 mm
3.937008 in
Width (B)
42 mm
1.653543 in
85.2 kN81.5 kN——1.22 kg1220 g
SKF7211 ACD/P4AQBCBMatched set of four super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
55 mm
2.165354 in
Outside diameter (D)
100 mm
3.937008 in
Width (B)
84 mm
3.307087 in
140 kN163 kN——2.41 kg2410 g
SKF7211 ACD/P4AQGBMatched set of four super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
55 mm
2.165354 in
Outside diameter (D)
100 mm
3.937008 in
Width (B)
84 mm
3.307087 in
140 kN163 kN——2.41 kg2410 g
SKF7211 ACD/P4ATBTAMatched set of three super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
55 mm
2.165354 in
Outside diameter (D)
100 mm
3.937008 in
Width (B)
63 mm
2.480315 in
114 kN122 kN——1.81 kg1810 g
SKF7211 ACD/P4ATBTBMatched set of three super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
55 mm
2.165354 in
Outside diameter (D)
100 mm
3.937008 in
Width (B)
63 mm
2.480315 in
114 kN122 kN——1.81 kg1810 g
SKF7211 ACD/P4ATBTCMatched set of three super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
55 mm
2.165354 in
Outside diameter (D)
100 mm
3.937008 in
Width (B)
63 mm
2.480315 in
114 kN122 kN——1.81 kg1810 g
SKF7211 ACD/P4ATGBMatched set of three super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
55 mm
2.165354 in
Outside diameter (D)
100 mm
3.937008 in
Width (B)
63 mm
2.480315 in
114 kN122 kN——1.81 kg1810 g
SKF7211 BE-2RZPSingle row angular contact ball bearing with 40° contact angle and non-contact seals on both sides
Bore diameter (d)
55 mm
2.165354 in
Outside diameter (D)
100 mm
3.937008 in
Width (B)
21 mm
0.826772 in
46.2 kN36 kN7500 rpm7500 rpm0.609 kg609 g
SKF7211 BECBJSingle row angular contact ball bearing
Bore diameter (d)
55 mm
2.165354 in
Outside diameter (D)
100 mm
3.937008 in
Width (B)
21 mm
0.826772 in
49 kN40 kN8000 rpm8000 rpm0.635 kg635 g
SKF7211 BECBMSingle row angular contact ball bearing
Bore diameter (d)
55 mm
2.165354 in
Outside diameter (D)
100 mm
3.937008 in
Width (B)
21 mm
0.826772 in
49 kN40 kN8000 rpm11000 rpm0.654 kg654 g
SKF7211 BECBPSingle row angular contact ball bearing
Bore diameter (d)
55 mm
2.165354 in
Outside diameter (D)
100 mm
3.937008 in
Width (B)
21 mm
0.826772 in
49 kN40 kN8000 rpm8000 rpm0.598 kg598 g
SKF7211 BECBPHSingle row angular contact ball bearing
Bore diameter (d)
55 mm
2.165354 in
Outside diameter (D)
100 mm
3.937008 in
Width (B)
21 mm
0.826772 in
49 kN40 kN8000 rpm8000 rpm0.598 kg598 g
SKF7211 BECBYSingle row angular contact ball bearing
Bore diameter (d)
55 mm
2.165354 in
Outside diameter (D)
100 mm
3.937008 in
Width (B)
21 mm
0.826772 in
49 kN40 kN8000 rpm8000 rpm0.616 kg616 g
SKF7211 BEGAPSingle row angular contact ball bearing
Bore diameter (d)
55 mm
2.165354 in
Outside diameter (D)
100 mm
3.937008 in
Width (B)
21 mm
0.826772 in
49 kN40 kN8000 rpm8000 rpm0.598 kg598 g
SKF7211 BEGBPSingle row angular contact ball bearing
Recorded bore (d)
55 mm
2.165354 in
Recorded outside dimension (D)
100 mm
3.937008 in
Catalogue width (symbol unverified)
21 mm
0.826772 in
49 kN40 kN8000 rpm8000 rpm0.616 kg616 g
SKF7211 BEGBYSingle row angular contact ball bearing
Bore diameter (d)
55 mm
2.165354 in
Outside diameter (D)
100 mm
3.937008 in
Width (B)
21 mm
0.826772 in
49 kN40 kN8000 rpm8000 rpm0.616 kg616 g
SKF7211 BEPSingle row angular contact ball bearing
Bore diameter (d)
55 mm
2.165354 in
Outside diameter (D)
100 mm
3.937008 in
Width (B)
21 mm
0.826772 in
46.2 kN36 kN7500 rpm7500 rpm0.598 kg598 g
SKF7211 CDGA/HCP4ASuper-precision, high-capacity, universally matchable single row angular contact ball bearing
Bore diameter (d)
55 mm
2.165354 in
Outside diameter (D)
100 mm
3.937008 in
Width (B)
21 mm
0.826772 in
55.3 kN43 kN——0.499 kg499 g
SKF7211 CDGA/P4ASuper-precision, high-capacity, universally matchable single row angular contact ball bearing
Bore diameter (d)
55 mm
2.165354 in
Outside diameter (D)
100 mm
3.937008 in
Width (B)
21 mm
0.826772 in
55.3 kN43 kN——0.603 kg603 g
SKF7211 CDGB/P4ASuper-precision, high-capacity, universally matchable single row angular contact ball bearing
Bore diameter (d)
55 mm
2.165354 in
Outside diameter (D)
100 mm
3.937008 in
Width (B)
21 mm
0.826772 in
55.3 kN43 kN——0.603 kg603 g
SKF7211 CD/HCP4ASuper-precision, high-capacity, single row angular contact ball bearing
Bore diameter (d)
55 mm
2.165354 in
Outside diameter (D)
100 mm
3.937008 in
Width (B)
21 mm
0.826772 in
55.3 kN43 kN——0.499 kg499 g
SKF7211 CD/HCP4ADBAMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
55 mm
2.165354 in
Outside diameter (D)
100 mm
3.937008 in
Width (B)
42 mm
1.653543 in
90.4 kN85 kN——0.997 kg997 g
SKF7211 CD/HCP4ADBBMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
55 mm
2.165354 in
Outside diameter (D)
100 mm
3.937008 in
Width (B)
42 mm
1.653543 in
90.4 kN85 kN——0.997 kg997 g
SKF7211 CD/HCP4ADGAMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
55 mm
2.165354 in
Outside diameter (D)
100 mm
3.937008 in
Width (B)
42 mm
1.653543 in
90.4 kN85 kN——0.997 kg997 g
SKF7211 CD/HCP4ADGCMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
55 mm
2.165354 in
Outside diameter (D)
100 mm
3.937008 in
Width (B)
42 mm
1.653543 in
90.4 kN85 kN——0.997 kg997 g
SKF7211 CD/HCP4ATGCMatched set of three super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
55 mm
2.165354 in
Outside diameter (D)
100 mm
3.937008 in
Width (B)
63 mm
2.480315 in
119 kN129 kN——1.5 kg1500 g
SKF7211 CD/P4ASuper-precision, high-capacity, single row angular contact ball bearing
Bore diameter (d)
55 mm
2.165354 in
Outside diameter (D)
100 mm
3.937008 in
Width (B)
21 mm
0.826772 in
55.3 kN43 kN——0.603 kg603 g
SKF7211 CD/P4ADBAMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
55 mm
2.165354 in
Outside diameter (D)
100 mm
3.937008 in
Width (B)
42 mm
1.653543 in
90.4 kN85 kN——1.21 kg1210 g
SKF7211 CD/P4ADBBMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
55 mm
2.165354 in
Outside diameter (D)
100 mm
3.937008 in
Width (B)
42 mm
1.653543 in
90.4 kN85 kN——1.21 kg1210 g
SKF7211 CD/P4ADBCMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
55 mm
2.165354 in
Outside diameter (D)
100 mm
3.937008 in
Width (B)
42 mm
1.653543 in
90.4 kN85 kN——1.21 kg1210 g
SKF7211 CD/P4ADGAMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
55 mm
2.165354 in
Outside diameter (D)
100 mm
3.937008 in
Width (B)
42 mm
1.653543 in
90.4 kN85 kN——1.21 kg1210 g
SKF7211 CD/P4ADGBMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
55 mm
2.165354 in
Outside diameter (D)
100 mm
3.937008 in
Width (B)
42 mm
1.653543 in
90.4 kN85 kN——1.21 kg1210 g
SKF7211 CD/P4ADGCMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings
Recorded bore (d)
55 mm
2.165354 in
Recorded outside dimension (D)
100 mm
3.937008 in
Catalogue width (symbol unverified)
42 mm
1.653543 in
90.4 kN85 kN——1.22 kg1220 g
SKF7211 CD/P4ADTMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
55 mm
2.165354 in
Outside diameter (D)
100 mm
3.937008 in
Width (B)
42 mm
1.653543 in
90.4 kN85 kN——1.21 kg1210 g
FAG7211-B-XL-JPAngular contact ball bearing
Bore diameter (d)
55 mm
2.165354 in
Outside diameter (D)
100 mm
3.937008 in
Width (B)
21 mm
0.826772 in
52 kN38.5 kN6800 rpm9200 rpm0.625 kg625 g
FAG7211-B-XL-JP-UAAngular contact ball bearing
Bore diameter (d)
55 mm
2.165354 in
Outside diameter (D)
100 mm
3.937008 in
Width (B)
21 mm
0.826772 in
52 kN38.5 kN6800 rpm9200 rpm0.625 kg625 g
FAG7211-B-XL-JP-UOAngular contact ball bearing
Bore diameter (d)
55 mm
2.165354 in
Outside diameter (D)
100 mm
3.937008 in
Width (B)
21 mm
0.826772 in
52 kN38.5 kN6800 rpm9200 rpm0.625 kg625 g
FAG7211-B-XL-MPAngular contact ball bearing
Bore diameter (d)
55 mm
2.165354 in
Outside diameter (D)
100 mm
3.937008 in
Width (B)
21 mm
0.826772 in
52 kN38.5 kN6800 rpm11900 rpm0.68 kg680 g
FAG7211-B-XL-MP-P6Angular contact ball bearing
Bore diameter (d)
55 mm
2.165354 in
Outside diameter (D)
100 mm
3.937008 in
Width (B)
21 mm
0.826772 in
52 kN38.5 kN6800 rpm11900 rpm0.668 kg668 g
FAG7211-B-XL-MP-S1-UAAngular contact ball bearing
Bore diameter (d)
55 mm
2.165354 in
Outside diameter (D)
100 mm
3.937008 in
Width (B)
21 mm
0.826772 in
52 kN38.5 kN6800 rpm11900 rpm0.668 kg668 g
FAG7211-B-XL-MP-UAAngular contact ball bearing
Bore diameter (d)
55 mm
2.165354 in
Outside diameter (D)
100 mm
3.937008 in
Width (B)
21 mm
0.826772 in
52 kN38.5 kN6800 rpm11900 rpm0.668 kg668 g
FAG7211-B-XL-MP-UBAngular contact ball bearing
Bore diameter (d)
55 mm
2.165354 in
Outside diameter (D)
100 mm
3.937008 in
Width (B)
21 mm
0.826772 in
52 kN38.5 kN6800 rpm11900 rpm0.68 kg680 g
FAG7211-B-XL-MP-UOAngular contact ball bearing
Bore diameter (d)
55 mm
2.165354 in
Outside diameter (D)
100 mm
3.937008 in
Width (B)
21 mm
0.826772 in
52 kN38.5 kN6800 rpm11900 rpm0.668 kg668 g
FAG7211-B-XL-TVPAngular contact ball bearing
Bore diameter (d)
55 mm
2.165354 in
Outside diameter (D)
100 mm
3.937008 in
Width (B)
21 mm
0.826772 in
52 kN38.5 kN6800 rpm9200 rpm0.605 kg605 g
FAG7211-B-XL-TVP-P5-UAAngular contact ball bearing
Bore diameter (d)
55 mm
2.165354 in
Outside diameter (D)
100 mm
3.937008 in
Width (B)
21 mm
0.826772 in
52 kN38.5 kN6800 rpm9200 rpm0.605 kg605 g
FAG7211-B-XL-TVP-P5-ULAngular contact ball bearing
Bore diameter (d)
55 mm
2.165354 in
Outside diameter (D)
100 mm
3.937008 in
Width (B)
21 mm
0.826772 in
52 kN38.5 kN6800 rpm9200 rpm0.605 kg605 g
FAG7211-B-XL-TVP-P5-UOAngular contact ball bearing
Bore diameter (d)
55 mm
2.165354 in
Outside diameter (D)
100 mm
3.937008 in
Width (B)
21 mm
0.826772 in
52 kN38.5 kN6800 rpm9200 rpm0.605 kg605 g
FAG7211-B-XL-TVP-UAAngular contact ball bearing
Bore diameter (d)
55 mm
2.165354 in
Outside diameter (D)
100 mm
3.937008 in
Width (B)
21 mm
0.826772 in
52 kN38.5 kN6800 rpm9200 rpm0.605 kg605 g
FAG7211-B-XL-TVP-UBAngular contact ball bearing
Bore diameter (d)
55 mm
2.165354 in
Outside diameter (D)
100 mm
3.937008 in
Width (B)
21 mm
0.826772 in
52 kN38.5 kN6800 rpm9200 rpm0.605 kg605 g
FAG7211-B-XL-TVP-UOAngular contact ball bearing
Bore diameter (d)
55 mm
2.165354 in
Outside diameter (D)
100 mm
3.937008 in
Width (B)
21 mm
0.826772 in
52 kN38.5 kN6800 rpm9200 rpm0.605 kg605 g
TIMKEN7211WNAngular contact ball bearing
Recorded bore (d)
55 mm
2.165354 in
Recorded outside dimension (D)
100 mm
3.937008 in
Catalogue width (symbol unverified)
21 mm
0.826772 in
46.3 kN36.1 kN——0.64 kg640 g
TIMKEN7211WNMBRSUAngular contact ball bearing
Recorded bore (d)
55 mm
2.165354 in
Recorded outside dimension (D)
100 mm
3.937008 in
Catalogue width (symbol unverified)
21 mm
0.826772 in
46.3 kN36.1 kN——0.64 kg640 g
TIMKEN7211WNSUAngular contact ball bearing
Recorded bore (d)
55 mm
2.165354 in
Recorded outside dimension (D)
100 mm
3.937008 in
Catalogue width (symbol unverified)
21 mm
0.826772 in
46.3 kN36.1 kN——0.64 kg640 g
NSK7211AWAngular contact ball bearing
Bore diameter (d)
55 mm
2.165354 in
Outside diameter (D)
100 mm
3.937008 in
Individual bearing width (B)
21 mm
0.826772 in
56 kN39.5 kN——0.613 kg613 g
NSK7211AWDBAngular contact ball bearing
Bore diameter (d)
55 mm
2.165354 in
Outside diameter (D)
100 mm
3.937008 in
Catalogue width (symbol unverified)
42 mm
1.653543 in
91.5 kN79 kN———
NSK7211AWDFAngular contact ball bearing
Bore diameter (d)
55 mm
2.165354 in
Outside diameter (D)
100 mm
3.937008 in
Catalogue width (symbol unverified)
42 mm
1.653543 in
91.5 kN79 kN———
NSK7211AWDTAngular contact ball bearing
Bore diameter (d)
55 mm
2.165354 in
Outside diameter (D)
100 mm
3.937008 in
Catalogue width (symbol unverified)
42 mm
1.653543 in
91.5 kN79 kN———
NSK7211BEAT85Angular contact ball bearing
Bore diameter (d)
55 mm
2.165354 in
Outside diameter (D)
100 mm
3.937008 in
Individual bearing width (B)
21 mm
0.826772 in
54 kN37 kN——0.596 kg596 g
NSK7211BWAngular contact ball bearing
Bore diameter (d)
55 mm
2.165354 in
Outside diameter (D)
100 mm
3.937008 in
Individual bearing width (B)
21 mm
0.826772 in
51 kN36 kN——0.627 kg627 g
NSK7211BWDBAngular contact ball bearing
Bore diameter (d)
55 mm
2.165354 in
Outside diameter (D)
100 mm
3.937008 in
Catalogue width (symbol unverified)
42 mm
1.653543 in
83 kN72 kN———
NSK7211BWDFAngular contact ball bearing
Bore diameter (d)
55 mm
2.165354 in
Outside diameter (D)
100 mm
3.937008 in
Catalogue width (symbol unverified)
42 mm
1.653543 in
83 kN72 kN———
NSK7211BWDTAngular contact ball bearing
Bore diameter (d)
55 mm
2.165354 in
Outside diameter (D)
100 mm
3.937008 in
Catalogue width (symbol unverified)
42 mm
1.653543 in
83 kN72 kN———
KOYO7211BAngular contact ball bearing
Bore diameter (d)
55 mm
2.165354 in
Outside diameter (D)
100 mm
3.937008 in
Width (B)
21 mm
0.826772 in
57.7 kN36.2 kN—4500 rpmLimiting Speeds(Grease Lub.): 4500 min-1Limiting Speeds(Oil Lub.): 6000 min-10.635 kg635 g
KOYO7211BDBAngular contact ball bearing
Bore diameter (d)
55 mm
2.165354 in
Outside diameter (D)
100 mm
3.937008 in
Width (B)
42 mm
1.653543 in
93.8 kN72.4 kN—3600 rpmLimiting Speeds(Grease Lub.): 3600 min-1Limiting Speeds(Oil Lub.): 4800 min-11.27 kg1270 g
KOYO7211BDB FYAngular contact ball bearing
Bore diameter (d)
55 mm
2.165354 in
Outside diameter (D)
100 mm
3.937008 in
Width (B)
42 mm
1.653543 in
89.6 kN67.6 kN—4600 rpmLimiting Speeds(Grease Lub.): 4600 min-1Limiting Speeds(Oil Lub.): 6100 min-11.27 kg1270 g
KOYO7211BDFAngular contact ball bearing
Bore diameter (d)
55 mm
2.165354 in
Outside diameter (D)
100 mm
3.937008 in
Width (B)
42 mm
1.653543 in
93.8 kN72.4 kN—3600 rpmLimiting Speeds(Grease Lub.): 3600 min-1Limiting Speeds(Oil Lub.): 4800 min-11.27 kg1270 g
KOYO7211BDF FYAngular contact ball bearing
Bore diameter (d)
55 mm
2.165354 in
Outside diameter (D)
100 mm
3.937008 in
Width (B)
42 mm
1.653543 in
89.6 kN67.6 kN—4600 rpmLimiting Speeds(Grease Lub.): 4600 min-1Limiting Speeds(Oil Lub.): 6100 min-11.27 kg1270 g
KOYO7211BDTAngular contact ball bearing
Bore diameter (d)
55 mm
2.165354 in
Outside diameter (D)
100 mm
3.937008 in
Width (B)
42 mm
1.653543 in
93.8 kN72.4 kN—3600 rpmLimiting Speeds(Grease Lub.): 3600 min-1Limiting Speeds(Oil Lub.): 4800 min-11.27 kg1270 g
KOYO7211BDT FYAngular contact ball bearing
Bore diameter (d)
55 mm
2.165354 in
Outside diameter (D)
100 mm
3.937008 in
Width (B)
42 mm
1.653543 in
89.6 kN67.6 kN—4600 rpmLimiting Speeds(Grease Lub.): 4600 min-1Limiting Speeds(Oil Lub.): 6100 min-11.27 kg1270 g
KOYO7211B FYAngular contact ball bearing
Bore diameter (d)
55 mm
2.165354 in
Outside diameter (D)
100 mm
3.937008 in
Width (B)
21 mm
0.826772 in
55.1 kN33.8 kN—5700 rpmLimiting Speeds(Grease Lub.): 5700 min-1Limiting Speeds(Oil Lub.): 7600 min-10.635 kg635 g
KOYO7211CAngular contact ball bearing
Bore diameter (d)
55 mm
2.165354 in
Outside diameter (D)
100 mm
3.937008 in
Width (B)
21 mm
0.826772 in
69.2 kN43.1 kN—8800 rpmLimiting Speeds(Grease Lub.): 8800 min-1Limiting Speeds(Oil Lub.): 11000 min-10.635 kg635 g
KOYO7211CDBAngular contact ball bearing
Bore diameter (d)
55 mm
2.165354 in
Outside diameter (D)
100 mm
3.937008 in
Width (B)
42 mm
1.653543 in
112 kN86.1 kN—6700 rpmLimiting Speeds(Grease Lub.): 6700 min-1Limiting Speeds(Oil Lub.): 8800 min-11.27 kg1270 g
KOYO7211CDB FYAngular contact ball bearing
Bore diameter (d)
55 mm
2.165354 in
Outside diameter (D)
100 mm
3.937008 in
Width (B)
42 mm
1.653543 in
107 kN80.4 kN—8400 rpmLimiting Speeds(Grease Lub.): 8400 min-1Limiting Speeds(Oil Lub.): 11000 min-11.27 kg1270 g
KOYO7211CDFAngular contact ball bearing
Bore diameter (d)
55 mm
2.165354 in
Outside diameter (D)
100 mm
3.937008 in
Width (B)
42 mm
1.653543 in
112 kN86.1 kN—6700 rpmLimiting Speeds(Grease Lub.): 6700 min-1Limiting Speeds(Oil Lub.): 8800 min-11.27 kg1270 g
KOYO7211CDF FYAngular contact ball bearing
Bore diameter (d)
55 mm
2.165354 in
Outside diameter (D)
100 mm
3.937008 in
Width (B)
42 mm
1.653543 in
107 kN80.4 kN—8400 rpmLimiting Speeds(Grease Lub.): 8400 min-1Limiting Speeds(Oil Lub.): 11000 min-11.27 kg1270 g
KOYO7211CDTAngular contact ball bearing
Bore diameter (d)
55 mm
2.165354 in
Outside diameter (D)
100 mm
3.937008 in
Width (B)
42 mm
1.653543 in
112 kN86.1 kN—6700 rpmLimiting Speeds(Grease Lub.): 6700 min-1Limiting Speeds(Oil Lub.): 8800 min-11.27 kg1270 g
KOYO7211CDT FYAngular contact ball bearing
Bore diameter (d)
55 mm
2.165354 in
Outside diameter (D)
100 mm
3.937008 in
Width (B)
42 mm
1.653543 in
107 kN80.4 kN—8400 rpmLimiting Speeds(Grease Lub.): 8400 min-1Limiting Speeds(Oil Lub.): 11000 min-11.27 kg1270 g
KOYO7211C FYAngular contact ball bearing
Bore diameter (d)
55 mm
2.165354 in
Outside diameter (D)
100 mm
3.937008 in
Width (B)
21 mm
0.826772 in
66.1 kN40.2 kN—11000 rpmLimiting Speeds(Grease Lub.): 11000 min-1Limiting Speeds(Oil Lub.): 14000 min-10.635 kg635 g
KOYO7211DBAngular contact ball bearing
Bore diameter (d)
55 mm
2.165354 in
Outside diameter (D)
100 mm
3.937008 in
Width (B)
42 mm
1.653543 in
104 kN79.6 kN—4800 rpmLimiting Speeds(Grease Lub.): 4800 min-1Limiting Speeds(Oil Lub.): 6000 min-11.27 kg1270 g
KOYO7211DB FYAngular contact ball bearing
Bore diameter (d)
55 mm
2.165354 in
Outside diameter (D)
100 mm
3.937008 in
Width (B)
42 mm
1.653543 in
98.9 kN74.2 kN—6100 rpmLimiting Speeds(Grease Lub.): 6100 min-1Limiting Speeds(Oil Lub.): 7600 min-11.27 kg1270 g
KOYO7211DFAngular contact ball bearing
Bore diameter (d)
55 mm
2.165354 in
Outside diameter (D)
100 mm
3.937008 in
Width (B)
42 mm
1.653543 in
104 kN79.6 kN—4800 rpmLimiting Speeds(Grease Lub.): 4800 min-1Limiting Speeds(Oil Lub.): 6000 min-11.27 kg1270 g
KOYO7211DF FYAngular contact ball bearing
Bore diameter (d)
55 mm
2.165354 in
Outside diameter (D)
100 mm
3.937008 in
Width (B)
42 mm
1.653543 in
98.9 kN74.2 kN—6100 rpmLimiting Speeds(Grease Lub.): 6100 min-1Limiting Speeds(Oil Lub.): 7600 min-11.27 kg1270 g
KOYO7211DTAngular contact ball bearing
Bore diameter (d)
55 mm
2.165354 in
Outside diameter (D)
100 mm
3.937008 in
Width (B)
42 mm
1.653543 in
104 kN79.6 kN—4800 rpmLimiting Speeds(Grease Lub.): 4800 min-1Limiting Speeds(Oil Lub.): 6000 min-11.27 kg1270 g
KOYO7211DT FYAngular contact ball bearing
Bore diameter (d)
55 mm
2.165354 in
Outside diameter (D)
100 mm
3.937008 in
Width (B)
42 mm
1.653543 in
98.9 kN74.2 kN—6100 rpmLimiting Speeds(Grease Lub.): 6100 min-1Limiting Speeds(Oil Lub.): 7600 min-11.27 kg1270 g
KOYO7211 FYAngular contact ball bearing
Bore diameter (d)
55 mm
2.165354 in
Outside diameter (D)
100 mm
3.937008 in
Width (B)
21 mm
0.826772 in
60.9 kN37.1 kN—7600 rpmLimiting Speeds(Grease Lub.): 7600 min-1Limiting Speeds(Oil Lub.): 9500 min-10.635 kg635 g
Compare recorded seals, clearance, precision and materials

Manufacturer wording is retained. A missing property is not inferred from another brand or a similar suffix.

Brand / designationClosureOriginal precisionClearanceCageMaterialLubricant
KOYO 7211Not recordedNot recordedNot recordedNot recordedNot recordedNot recorded
SKF 7211 ACCBMWithoutP6Not recordedMachined brassBearing steelNone
SKF 7211 ACDGA/HCP4AWithoutNot recordedNot recordedNot recordedHybrid (ceramic balls)None
SKF 7211 ACDGA/P4AWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7211 ACDGB/HCP4AWithoutNot recordedNot recordedNot recordedHybrid (ceramic balls)None
SKF 7211 ACDGB/P4AWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7211 ACDGC/P4AWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7211 ACD/HCP4AWithoutNot recordedNot recordedNot recordedHybrid (ceramic balls)None
SKF 7211 ACD/HCP4ADGBWithoutNot recordedNot recordedNot recordedHybrid (ceramic balls)None
SKF 7211 ACD/P4AWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7211 ACD/P4ADBAWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7211 ACD/P4ADBBWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7211 ACD/P4ADBCWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7211 ACD/P4ADFAWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7211 ACD/P4ADFBWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7211 ACD/P4ADFCWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7211 ACD/P4ADGAWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7211 ACD/P4ADGBWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7211 ACD/P4ADGCWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7211 ACD/P4ADTWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7211 ACD/P4AQBCBWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7211 ACD/P4AQGBWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7211 ACD/P4ATBTAWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7211 ACD/P4ATBTBWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7211 ACD/P4ATBTCWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7211 ACD/P4ATGBWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7211 BE-2RZPSeal on both sidesNormalNot recordedNon-metallicBearing steelGrease
SKF 7211 BECBJWithoutP6Not recordedSteel sheet metalBearing steelNone
SKF 7211 BECBMWithoutP6Not recordedMachined brassBearing steelNone
SKF 7211 BECBPWithoutP6Not recordedNon-metallicBearing steelNone
SKF 7211 BECBPHWithoutP6Not recordedNon-metallicBearing steelNone
SKF 7211 BECBYWithoutP6Not recordedBrass sheet metalBearing steelNone
SKF 7211 BEGAPWithoutP6Not recordedNon-metallicBearing steelNone
SKF 7211 BEGBPWithoutNot recordedNot recordedNon-metallicBearing steelNone
SKF 7211 BEGBYWithoutP6Not recordedBrass sheet metalBearing steelNone
SKF 7211 BEPWithoutNormalNot recordedNon-metallicBearing steelNone
SKF 7211 CDGA/HCP4AWithoutNot recordedNot recordedNot recordedHybrid (ceramic balls)None
SKF 7211 CDGA/P4AWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7211 CDGB/P4AWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7211 CD/HCP4AWithoutNot recordedNot recordedNot recordedHybrid (ceramic balls)None
SKF 7211 CD/HCP4ADBAWithoutNot recordedNot recordedNot recordedHybrid (ceramic balls)None
SKF 7211 CD/HCP4ADBBWithoutNot recordedNot recordedNot recordedHybrid (ceramic balls)None
SKF 7211 CD/HCP4ADGAWithoutNot recordedNot recordedNot recordedHybrid (ceramic balls)None
SKF 7211 CD/HCP4ADGCWithoutNot recordedNot recordedNot recordedHybrid (ceramic balls)None
SKF 7211 CD/HCP4ATGCWithoutNot recordedNot recordedNot recordedHybrid (ceramic balls)None
SKF 7211 CD/P4AWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7211 CD/P4ADBAWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7211 CD/P4ADBBWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7211 CD/P4ADBCWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7211 CD/P4ADGAWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7211 CD/P4ADGBWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7211 CD/P4ADGCWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7211 CD/P4ADTWithoutNot recordedNot recordedNot recordedBearing steelNone
FAG 7211-B-XL-JPWithout — Not sealedP6 — Class 6 (ISO 492:2023)Not recordedJP — Steel sheet metalNot recordedWithout — Bearing not greased
FAG 7211-B-XL-JP-UAWithout — Not sealedP6 — Class 6 (ISO 492:2023)Not recordedJP — Steel sheet metalNot recordedWithout — Bearing not greased
FAG 7211-B-XL-JP-UOWithout — Not sealedP6 — Class 6 (ISO 492:2023)Not recordedJP — Steel sheet metalNot recordedWithout — Bearing not greased
FAG 7211-B-XL-MPWithout — Not sealedP6 — Class 6 (ISO 492:2023)Not recordedMP — Solid brass cage, ball guidedNot recordedWithout — Bearing not greased
FAG 7211-B-XL-MP-P6Without — Not sealedP6 — Class 6 (ISO 492:2023)Not recordedMP — Solid brass cage, ball guidedNot recordedWithout — Bearing not greased
FAG 7211-B-XL-MP-S1-UAWithout — Not sealedP6 — Class 6 (ISO 492:2023)Not recordedMP — Solid brass cage, ball guidedNot recordedWithout — Bearing not greased
FAG 7211-B-XL-MP-UAWithout — Not sealedP6 — Class 6 (ISO 492:2023)Not recordedMP — Solid brass cage, ball guidedNot recordedWithout — Bearing not greased
FAG 7211-B-XL-MP-UBWithout — Not sealedP6 — Class 6 (ISO 492:2023)Not recordedMP — Solid brass cage, ball guidedNot recordedWithout — Bearing not greased
FAG 7211-B-XL-MP-UOWithout — Not sealedP6 — Class 6 (ISO 492:2023)Not recordedMP — Solid brass cage, ball guidedNot recordedWithout — Bearing not greased
FAG 7211-B-XL-TVPWithout — Not sealedP6 — Class 6 (ISO 492:2023)Not recordedTVP — Solid cage made of glass-fiber reinforced polyamid PA66Not recordedWithout — Bearing not greased
FAG 7211-B-XL-TVP-P5-UAWithout — Not sealedP5 — Class 5 (ISO 492:2023)Not recordedTVP — Solid cage made of glass-fiber reinforced polyamid PA66Not recordedWithout — Bearing not greased
FAG 7211-B-XL-TVP-P5-ULWithout — Not sealedP5 — Class 5 (ISO 492:2023)Not recordedTVP — Solid cage made of glass-fiber reinforced polyamid PA66Not recordedWithout — Bearing not greased
FAG 7211-B-XL-TVP-P5-UOWithout — Not sealedP5 — Class 5 (ISO 492:2023)Not recordedTVP — Solid cage made of glass-fiber reinforced polyamid PA66Not recordedWithout — Bearing not greased
FAG 7211-B-XL-TVP-UAWithout — Not sealedP6 — Class 6 (ISO 492:2023)Not recordedTVP — Solid cage made of glass-fiber reinforced polyamid PA66Not recordedWithout — Bearing not greased
FAG 7211-B-XL-TVP-UBWithout — Not sealedP6 — Class 6 (ISO 492:2023)Not recordedTVP — Solid cage made of glass-fiber reinforced polyamid PA66Not recordedWithout — Bearing not greased
FAG 7211-B-XL-TVP-UOWithout — Not sealedP6 — Class 6 (ISO 492:2023)Not recordedTVP — Solid cage made of glass-fiber reinforced polyamid PA66Not recordedWithout — Bearing not greased
TIMKEN 7211WNOpenNot recordedNot recordedBrass cageNot recordedNot recorded
TIMKEN 7211WNMBRSUOpenNot recordedNot recordedBrass cageNot recordedNot recorded
TIMKEN 7211WNSUOpenNot recordedNot recordedBrass cageNot recordedNot recorded
NSK 7211AWNot recordedNot recordedNot recordedPressed steelNot recordedNot recorded
NSK 7211AWDBNot recordedNot recordedNot recordedPressed steelNot recordedNot recorded
NSK 7211AWDFNot recordedNot recordedNot recordedPressed steelNot recordedNot recorded
NSK 7211AWDTNot recordedNot recordedNot recordedPressed steelNot recordedNot recorded
NSK 7211BEAT85Not recordedNot recordedNot recordedPolyamide 46 resinNot recordedNot recorded
NSK 7211BWNot recordedNot recordedNot recordedPressed steelNot recordedNot recorded
NSK 7211BWDBNot recordedNot recordedNot recordedPressed steelNot recordedNot recorded
NSK 7211BWDFNot recordedNot recordedNot recordedPressed steelNot recordedNot recorded
NSK 7211BWDTNot recordedNot recordedNot recordedPressed steelNot recordedNot recorded
KOYO 7211BNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 7211BDBNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 7211BDB FYNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 7211BDFNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 7211BDF FYNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 7211BDTNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 7211BDT FYNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 7211B FYNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 7211CNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 7211CDBNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 7211CDB FYNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 7211CDFNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 7211CDF FYNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 7211CDTNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 7211CDT FYNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 7211C FYNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 7211DBNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 7211DB FYNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 7211DFNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 7211DF FYNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 7211DTNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 7211DT FYNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 7211 FYNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded

How to compare these values

  • Use the displayed dimension names and original symbols. Housing length L, height H2 and flange width are not bearing outside diameter D. A catalogue width with an unverified symbol must not be assumed to be inner-ring width B or assembly width T. Open the product record for mounting dimensions and geometry.
  • Inch values are calculated from the recorded millimetres using 25.4 mm per inch, rounded to six decimal places. They do not change a metric bearing into an inch-series bearing. Gram values are converted from the recorded mass in kilograms.
  • C and C0 describe different rating conditions. They are not a single safe working-load limit and cannot replace an application load calculation.
  • Reference and limiting speeds are separate catalogue values. The source grease/oil context is shown where recorded. Lubricant, seals, loads, fit, clearance and cooling affect the usable operating speed.
  • A common base number does not prove equivalent seals, clearance, precision, material or interchangeability. Open the full designation for these fields.
Check load calculations →Estimate rating life →Decode the complete marking →Check replacement evidence →

Related prefix matches — other model numbers may appear

These discovery results can contain a longer number or a different component. They are not specifications for the requested exact model. Open the complete product to inspect its original geometry.

KOYO

7211

Angular contact ball bearing

View full technical record →SKF

7211 ACCBM

Single row angular contact ball bearing with 25° contact angle

View full technical record →SKF

7211 ACDGA/HCP4A

Super-precision, high-capacity, universally matchable single row angular contact ball bearing

View full technical record →SKF

7211 ACDGA/P4A

Super-precision, high-capacity, universally matchable single row angular contact ball bearing

View full technical record →SKF

7211 ACDGB/HCP4A

Super-precision, high-capacity, universally matchable single row angular contact ball bearing

View full technical record →SKF

7211 ACDGB/P4A

Super-precision, high-capacity, universally matchable single row angular contact ball bearing

View full technical record →SKF

7211 ACDGC/P4A

Super-precision, high-capacity, universally matchable single row angular contact ball bearing

View full technical record →SKF

7211 ACD/HCP4A

Super-precision, high-capacity, single row angular contact ball bearing

View full technical record →SKF

7211 ACD/HCP4ADGB

Matched set of two super-precision, high-capacity, D design, single row angular contact ball bearings

View full technical record →SKF

7211 ACD/P4A

Super-precision, high-capacity, single row angular contact ball bearing

View full technical record →SKF

7211 ACD/P4ADBA

Matched set of two super-precision, high-capacity, D design, single row angular contact ball bearings

View full technical record →SKF

7211 ACD/P4ADBB

Matched set of two super-precision, high-capacity, D design, single row angular contact ball bearings

View full technical record →
Filter all 104 prefix results →

Check the drawing before substituting

Nominal dimensions are not shaft-fit tolerances. Different variants can add grooves, flanges, wider rings or assembly components. When the table has different dimensions, the complete designation—not the shared prefix—controls.

Measurement guide →Cross-reference checks →

Reference basis & data limits

Manufacturer terminology is retained in the product records. Technical reference basis: JTEKT Basic Bearing Knowledge (boundary dimensions, tolerance classes and lubrication); NSK Bearing ABCs (lubrication, designations and clearance); NTN technical FAQs (closure codes and component interchange); SKF rolling-bearing selection and maintenance references.

Selection workflows and catalogue grouping are BearingScope editorial aids. Verify the current drawing and application requirements before using a candidate. Missing database information is not converted into an assumed match.

Search the consolidated catalogue

Find, filter and compare bearing model data in one place.

Open model search