99,016 bearing records · search, filter and compare

info@bearingscope.com
Find · understand · compare

7210 bearing dimensions & suffix variants

Look up recorded dimensions for designations beginning with 7210. The table retains complete manufacturer designations so special suffixes and different dimensional variants remain visible.

On this page5 sections

Find by measured dimensions

Enter bore d, outside diameter D and width B. Use decimals or inch fractions such as 1/2 or 1 1/4.

For tapered assemblies use total width T; for units or flanged bearings also check the mounting drawing.

Exact model evidence

7210 dimensions and recorded technical data

The recorded 7210 base designation measures 50×90×20 mm (inside diameter d × outside diameter D × width B). This answer uses unsuffixed records from KOYO, NTN. It does not assign the same dimensions or operating ratings to every suffix.

The numeric series boundary is preserved: a longer number is not included merely because its first digits match. 105 recorded variants are listed. A dash means the value is missing, not zero.

Brand / full designationNamed dimensions (mm / in)Dynamic C (kN)Static C0 (kN)Reference speed (rpm)Limiting speed (rpm)Mass (kg / g)
KOYO7210Angular contact ball bearing
Bore diameter (d)
50 mm
1.968504 in
Outside diameter (D)
90 mm
3.543307 in
Width (B)
20 mm
0.787402 in
51.6 kN31.5 kN—6800 rpmLimiting Speeds(Grease Lub.): 6800 min-1Limiting Speeds(Oil Lub.): 8800 min-10.485 kg485 g
NTN7210Angular contact ball bearing
Internal diameter (d)
50 mm
1.968504 in
External diameter (D)
90 mm
3.543307 in
Bearing/Inner ring width (B)
20 mm
0.787402 in
45.5 kN31.5 kN——0.457 kg457 g
SKF7210 ACCBMSingle row angular contact ball bearing with 25° contact angle
Bore diameter (d)
50 mm
1.968504 in
Outside diameter (D)
90 mm
3.543307 in
Width (B)
20 mm
0.787402 in
45.5 kN35.5 kN9000 rpm14000 rpm0.491 kg491 g
SKF7210 ACDGA/HCP4ASuper-precision, high-capacity, universally matchable single row angular contact ball bearing
Bore diameter (d)
50 mm
1.968504 in
Outside diameter (D)
90 mm
3.543307 in
Width (B)
20 mm
0.787402 in
42.3 kN32.5 kN——0.381 kg381 g
SKF7210 ACDGA/P4ASuper-precision, high-capacity, universally matchable single row angular contact ball bearing
Bore diameter (d)
50 mm
1.968504 in
Outside diameter (D)
90 mm
3.543307 in
Width (B)
20 mm
0.787402 in
42.3 kN32.5 kN——0.454 kg454 g
SKF7210 ACDGB/P4ASuper-precision, high-capacity, universally matchable single row angular contact ball bearing
Bore diameter (d)
50 mm
1.968504 in
Outside diameter (D)
90 mm
3.543307 in
Width (B)
20 mm
0.787402 in
42.3 kN32.5 kN——0.454 kg454 g
SKF7210 ACDGC/P4ASuper-precision, high-capacity, universally matchable single row angular contact ball bearing
Bore diameter (d)
50 mm
1.968504 in
Outside diameter (D)
90 mm
3.543307 in
Width (B)
20 mm
0.787402 in
42.3 kN32.5 kN——0.454 kg454 g
SKF7210 ACD/HCP4ADBAMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
50 mm
1.968504 in
Outside diameter (D)
90 mm
3.543307 in
Width (B)
40 mm
1.574803 in
68.9 kN65.5 kN——0.762 kg762 g
SKF7210 ACD/HCP4ADBBMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
50 mm
1.968504 in
Outside diameter (D)
90 mm
3.543307 in
Width (B)
40 mm
1.574803 in
68.9 kN65.5 kN——0.762 kg762 g
SKF7210 ACD/HCP4AQBCCMatched set of four super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
50 mm
1.968504 in
Outside diameter (D)
90 mm
3.543307 in
Width (B)
80 mm
3.149606 in
112 kN129 kN——1.52 kg1520 g
SKF7210 ACD/HCP4ATBTAMatched set of three super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
50 mm
1.968504 in
Outside diameter (D)
90 mm
3.543307 in
Width (B)
60 mm
2.362205 in
92.3 kN98 kN——1.14 kg1140 g
SKF7210 ACD/P4ASuper-precision, high-capacity, single row angular contact ball bearing
Bore diameter (d)
50 mm
1.968504 in
Outside diameter (D)
90 mm
3.543307 in
Width (B)
20 mm
0.787402 in
42.3 kN32.5 kN——0.454 kg454 g
SKF7210 ACD/P4ADBAMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
50 mm
1.968504 in
Outside diameter (D)
90 mm
3.543307 in
Width (B)
40 mm
1.574803 in
68.9 kN65.5 kN——0.908 kg908 g
SKF7210 ACD/P4ADBBMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
50 mm
1.968504 in
Outside diameter (D)
90 mm
3.543307 in
Width (B)
40 mm
1.574803 in
68.9 kN65.5 kN——0.908 kg908 g
SKF7210 ACD/P4ADBCMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
50 mm
1.968504 in
Outside diameter (D)
90 mm
3.543307 in
Width (B)
40 mm
1.574803 in
68.9 kN65.5 kN——0.908 kg908 g
SKF7210 ACD/P4ADBDMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
50 mm
1.968504 in
Outside diameter (D)
90 mm
3.543307 in
Width (B)
40 mm
1.574803 in
68.9 kN65.5 kN——0.908 kg908 g
SKF7210 ACD/P4ADFBMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
50 mm
1.968504 in
Outside diameter (D)
90 mm
3.543307 in
Width (B)
40 mm
1.574803 in
68.9 kN65.5 kN——0.908 kg908 g
SKF7210 ACD/P4ADGAMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
50 mm
1.968504 in
Outside diameter (D)
90 mm
3.543307 in
Width (B)
40 mm
1.574803 in
68.9 kN65.5 kN——0.908 kg908 g
SKF7210 ACD/P4ADGBMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
50 mm
1.968504 in
Outside diameter (D)
90 mm
3.543307 in
Width (B)
40 mm
1.574803 in
68.9 kN65.5 kN——0.908 kg908 g
SKF7210 ACD/P4ADGCMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
50 mm
1.968504 in
Outside diameter (D)
90 mm
3.543307 in
Width (B)
40 mm
1.574803 in
68.9 kN65.5 kN——0.908 kg908 g
SKF7210 ACD/P4ADTMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
50 mm
1.968504 in
Outside diameter (D)
90 mm
3.543307 in
Width (B)
40 mm
1.574803 in
68.9 kN65.5 kN——0.908 kg908 g
SKF7210 ACD/P4AQBCCMatched set of four super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
50 mm
1.968504 in
Outside diameter (D)
90 mm
3.543307 in
Width (B)
80 mm
3.149606 in
112 kN129 kN——1.82 kg1820 g
SKF7210 ACD/P4AQBTAMatched set of four super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
50 mm
1.968504 in
Outside diameter (D)
90 mm
3.543307 in
Width (B)
80 mm
3.149606 in
112 kN129 kN——1.82 kg1820 g
SKF7210 ACD/P4AQBTBMatched set of four super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
50 mm
1.968504 in
Outside diameter (D)
90 mm
3.543307 in
Width (B)
80 mm
3.149606 in
112 kN129 kN——1.82 kg1820 g
SKF7210 ACD/P4AQGCMatched set of four super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
50 mm
1.968504 in
Outside diameter (D)
90 mm
3.543307 in
Width (B)
80 mm
3.149606 in
112 kN129 kN——1.82 kg1820 g
SKF7210 ACD/P4ATBTAMatched set of three super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
50 mm
1.968504 in
Outside diameter (D)
90 mm
3.543307 in
Width (B)
60 mm
2.362205 in
92.3 kN98 kN——1.36 kg1360 g
SKF7210 ACD/P4ATBTBMatched set of three super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
50 mm
1.968504 in
Outside diameter (D)
90 mm
3.543307 in
Width (B)
60 mm
2.362205 in
92.3 kN98 kN——1.36 kg1360 g
SKF7210 ACD/P4ATBTCMatched set of three super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
50 mm
1.968504 in
Outside diameter (D)
90 mm
3.543307 in
Width (B)
60 mm
2.362205 in
92.3 kN98 kN——1.36 kg1360 g
SKF7210 BE-2RZPSingle row angular contact ball bearing with 40° contact angle and non-contact seals on both sides
Bore diameter (d)
50 mm
1.968504 in
Outside diameter (D)
90 mm
3.543307 in
Width (B)
20 mm
0.787402 in
37.7 kN28.5 kN9000 rpm7000 rpm0.458 kg458 g
SKF7210 BECBJSingle row angular contact ball bearing
Bore diameter (d)
50 mm
1.968504 in
Outside diameter (D)
90 mm
3.543307 in
Width (B)
20 mm
0.787402 in
40 kN31 kN9000 rpm9000 rpm0.472 kg472 g
SKF7210 BECBMSingle row angular contact ball bearing
Bore diameter (d)
50 mm
1.968504 in
Outside diameter (D)
90 mm
3.543307 in
Width (B)
20 mm
0.787402 in
39 kN31 kN9000 rpm12000 rpm0.491 kg491 g
SKF7210 BECBPSingle row angular contact ball bearing
Bore diameter (d)
50 mm
1.968504 in
Outside diameter (D)
90 mm
3.543307 in
Width (B)
20 mm
0.787402 in
40 kN31 kN9000 rpm9000 rpm0.453 kg453 g
SKF7210 BECBYSingle row angular contact ball bearing
Bore diameter (d)
50 mm
1.968504 in
Outside diameter (D)
90 mm
3.543307 in
Width (B)
20 mm
0.787402 in
40 kN31 kN9000 rpm9000 rpm0.491 kg491 g
SKF7210 BEGAPSingle row angular contact ball bearing
Bore diameter (d)
50 mm
1.968504 in
Outside diameter (D)
90 mm
3.543307 in
Width (B)
20 mm
0.787402 in
40 kN31 kN9000 rpm9000 rpm0.453 kg453 g
SKF7210 BEGBPSingle row angular contact ball bearing
Bore diameter (d)
50 mm
1.968504 in
Outside diameter (D)
90 mm
3.543307 in
Width (B)
20 mm
0.787402 in
40 kN31 kN9000 rpm9000 rpm0.453 kg453 g
SKF7210 BEPSingle row angular contact ball bearing
Bore diameter (d)
50 mm
1.968504 in
Outside diameter (D)
90 mm
3.543307 in
Width (B)
20 mm
0.787402 in
37.7 kN28.5 kN9000 rpm8500 rpm0.453 kg453 g
SKF7210 CDGA/HCP4ASuper-precision, high-capacity, universally matchable single row angular contact ball bearing
Bore diameter (d)
50 mm
1.968504 in
Outside diameter (D)
90 mm
3.543307 in
Width (B)
20 mm
0.787402 in
44.9 kN34 kN——0.381 kg381 g
SKF7210 CDGA/P4ASuper-precision, high-capacity, universally matchable single row angular contact ball bearing
Bore diameter (d)
50 mm
1.968504 in
Outside diameter (D)
90 mm
3.543307 in
Width (B)
20 mm
0.787402 in
44.9 kN34 kN——0.454 kg454 g
SKF7210 CDGB/P4ASuper-precision, high-capacity, universally matchable single row angular contact ball bearing
Bore diameter (d)
50 mm
1.968504 in
Outside diameter (D)
90 mm
3.543307 in
Width (B)
20 mm
0.787402 in
44.9 kN34 kN——0.454 kg454 g
SKF7210 CD/HCP4ASuper-precision, high-capacity, single row angular contact ball bearing
Bore diameter (d)
50 mm
1.968504 in
Outside diameter (D)
90 mm
3.543307 in
Width (B)
20 mm
0.787402 in
44.9 kN34 kN——0.381 kg381 g
SKF7210 CD/HCP4ADBAMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
50 mm
1.968504 in
Outside diameter (D)
90 mm
3.543307 in
Width (B)
40 mm
1.574803 in
72.8 kN68 kN——0.762 kg762 g
SKF7210 CD/HCP4ADGAMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
50 mm
1.968504 in
Outside diameter (D)
90 mm
3.543307 in
Width (B)
40 mm
1.574803 in
72.8 kN68 kN——0.762 kg762 g
SKF7210 CD/P4ASuper-precision, high-capacity, single row angular contact ball bearing
Bore diameter (d)
50 mm
1.968504 in
Outside diameter (D)
90 mm
3.543307 in
Width (B)
20 mm
0.787402 in
44.9 kN34 kN——0.454 kg454 g
SKF7210 CD/P4ADBAMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
50 mm
1.968504 in
Outside diameter (D)
90 mm
3.543307 in
Width (B)
40 mm
1.574803 in
72.8 kN68 kN——0.908 kg908 g
SKF7210 CD/P4ADBBMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
50 mm
1.968504 in
Outside diameter (D)
90 mm
3.543307 in
Width (B)
40 mm
1.574803 in
72.8 kN68 kN——0.908 kg908 g
SKF7210 CD/P4ADBCMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
50 mm
1.968504 in
Outside diameter (D)
90 mm
3.543307 in
Width (B)
40 mm
1.574803 in
72.8 kN68 kN——0.908 kg908 g
SKF7210 CD/P4ADFBMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
50 mm
1.968504 in
Outside diameter (D)
90 mm
3.543307 in
Width (B)
40 mm
1.574803 in
72.8 kN68 kN——0.908 kg908 g
SKF7210 CD/P4ADGAMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
50 mm
1.968504 in
Outside diameter (D)
90 mm
3.543307 in
Width (B)
40 mm
1.574803 in
72.8 kN68 kN——0.908 kg908 g
SKF7210 CD/P4ADGBMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
50 mm
1.968504 in
Outside diameter (D)
90 mm
3.543307 in
Width (B)
40 mm
1.574803 in
72.8 kN68 kN——0.908 kg908 g
SKF7210 CD/P4ADGCMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
50 mm
1.968504 in
Outside diameter (D)
90 mm
3.543307 in
Width (B)
40 mm
1.574803 in
72.8 kN68 kN——0.908 kg908 g
SKF7210 CD/P4ADGDMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
50 mm
1.968504 in
Outside diameter (D)
90 mm
3.543307 in
Width (B)
40 mm
1.574803 in
72.8 kN68 kN——0.908 kg908 g
SKF7210 CD/P4ADTMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
50 mm
1.968504 in
Outside diameter (D)
90 mm
3.543307 in
Width (B)
40 mm
1.574803 in
72.8 kN68 kN——0.908 kg908 g
SKF7210 CD/P4ATBTBMatched set of three super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
50 mm
1.968504 in
Outside diameter (D)
90 mm
3.543307 in
Width (B)
60 mm
2.362205 in
97.5 kN102 kN——1.36 kg1360 g
SKF7210 CD/P4ATGBMatched set of three super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
50 mm
1.968504 in
Outside diameter (D)
90 mm
3.543307 in
Width (B)
60 mm
2.362205 in
97.5 kN102 kN——1.36 kg1360 g
FAG7210-B-XL-JPAngular contact ball bearing
Bore diameter (d)
50 mm
1.968504 in
Outside diameter (D)
90 mm
3.543307 in
Width (B)
20 mm
0.787402 in
41.5 kN28.5 kN7600 rpm10300 rpm0.47 kg470 g
FAG7210-B-XL-JP-P5-ULAngular contact ball bearing
Bore diameter (d)
50 mm
1.968504 in
Outside diameter (D)
90 mm
3.543307 in
Width (B)
20 mm
0.787402 in
41.5 kN28.5 kN7600 rpm10300 rpm0.483 kg483 g
FAG7210-B-XL-JP-UAAngular contact ball bearing
Bore diameter (d)
50 mm
1.968504 in
Outside diameter (D)
90 mm
3.543307 in
Width (B)
20 mm
0.787402 in
41.5 kN28.5 kN7600 rpm10300 rpm0.47 kg470 g
FAG7210-B-XL-JP-UOAngular contact ball bearing
Bore diameter (d)
50 mm
1.968504 in
Outside diameter (D)
90 mm
3.543307 in
Width (B)
20 mm
0.787402 in
41.5 kN28.5 kN7600 rpm10300 rpm0.47 kg470 g
FAG7210-B-XL-MPAngular contact ball bearing
Bore diameter (d)
50 mm
1.968504 in
Outside diameter (D)
90 mm
3.543307 in
Width (B)
20 mm
0.787402 in
41.5 kN28.5 kN7600 rpm13400 rpm0.515 kg515 g
FAG7210-B-XL-MP-P5-UOAngular contact ball bearing
Bore diameter (d)
50 mm
1.968504 in
Outside diameter (D)
90 mm
3.543307 in
Width (B)
20 mm
0.787402 in
41.5 kN28.5 kN7600 rpm13400 rpm0.519 kg519 g
FAG7210-B-XL-MP-UAAngular contact ball bearing
Bore diameter (d)
50 mm
1.968504 in
Outside diameter (D)
90 mm
3.543307 in
Width (B)
20 mm
0.787402 in
41.5 kN28.5 kN7600 rpm13400 rpm0.515 kg515 g
FAG7210-B-XL-MP-UBAngular contact ball bearing
Bore diameter (d)
50 mm
1.968504 in
Outside diameter (D)
90 mm
3.543307 in
Width (B)
20 mm
0.787402 in
41.5 kN28.5 kN7600 rpm13400 rpm0.51 kg510 g
FAG7210-B-XL-MP-UOAngular contact ball bearing
Bore diameter (d)
50 mm
1.968504 in
Outside diameter (D)
90 mm
3.543307 in
Width (B)
20 mm
0.787402 in
41.5 kN28.5 kN7600 rpm13400 rpm0.519 kg519 g
FAG7210-B-XL-TVPAngular contact ball bearing
Bore diameter (d)
50 mm
1.968504 in
Outside diameter (D)
90 mm
3.543307 in
Width (B)
20 mm
0.787402 in
41.5 kN28.5 kN7600 rpm10300 rpm0.455 kg455 g
FAG7210-B-XL-TVP-P5Angular contact ball bearing
Bore diameter (d)
50 mm
1.968504 in
Outside diameter (D)
90 mm
3.543307 in
Width (B)
20 mm
0.787402 in
41.5 kN28.5 kN7600 rpm10300 rpm0.46 kg460 g
FAG7210-B-XL-TVP-P5-ULAngular contact ball bearing
Bore diameter (d)
50 mm
1.968504 in
Outside diameter (D)
90 mm
3.543307 in
Width (B)
20 mm
0.787402 in
41.5 kN28.5 kN7600 rpm10300 rpm0.46 kg460 g
FAG7210-B-XL-TVP-P5-UOAngular contact ball bearing
Bore diameter (d)
50 mm
1.968504 in
Outside diameter (D)
90 mm
3.543307 in
Width (B)
20 mm
0.787402 in
41.5 kN28.5 kN7600 rpm10300 rpm0.46 kg460 g
FAG7210-B-XL-TVP-UAAngular contact ball bearing
Bore diameter (d)
50 mm
1.968504 in
Outside diameter (D)
90 mm
3.543307 in
Width (B)
20 mm
0.787402 in
41.5 kN28.5 kN7600 rpm10300 rpm0.47 kg470 g
FAG7210-B-XL-TVP-UBAngular contact ball bearing
Bore diameter (d)
50 mm
1.968504 in
Outside diameter (D)
90 mm
3.543307 in
Width (B)
20 mm
0.787402 in
41.5 kN28.5 kN7600 rpm10300 rpm0.461 kg461 g
FAG7210-B-XL-TVP-UOAngular contact ball bearing
Bore diameter (d)
50 mm
1.968504 in
Outside diameter (D)
90 mm
3.543307 in
Width (B)
20 mm
0.787402 in
41.5 kN28.5 kN7600 rpm10300 rpm0.455 kg455 g
TIMKEN7210WNAngular contact ball bearing
Recorded bore (d)
50 mm
1.968504 in
Recorded outside dimension (D)
90 mm
3.543307 in
Catalogue width (symbol unverified)
20 mm
0.787402 in
37.4 kN28.6 kN——0.51 kg510 g
TIMKEN7210WNMBRSUAngular contact ball bearing
Recorded bore (d)
50 mm
1.968504 in
Recorded outside dimension (D)
90 mm
3.543307 in
Catalogue width (symbol unverified)
20 mm
0.787402 in
37.4 kN28.6 kN——0.51 kg510 g
TIMKEN7210WNSUAngular contact ball bearing
Recorded bore (d)
50 mm
1.968504 in
Recorded outside dimension (D)
90 mm
3.543307 in
Catalogue width (symbol unverified)
20 mm
0.787402 in
37.4 kN28.6 kN——0.51 kg510 g
NSK7210AWAngular contact ball bearing
Bore diameter (d)
50 mm
1.968504 in
Outside diameter (D)
90 mm
3.543307 in
Individual bearing width (B)
20 mm
0.787402 in
45.5 kN31.5 kN——0.466 kg466 g
NSK7210AWDBAngular contact ball bearing
Bore diameter (d)
50 mm
1.968504 in
Outside diameter (D)
90 mm
3.543307 in
Catalogue width (symbol unverified)
40 mm
1.574803 in
74 kN63 kN———
NSK7210AWDFAngular contact ball bearing
Bore diameter (d)
50 mm
1.968504 in
Outside diameter (D)
90 mm
3.543307 in
Catalogue width (symbol unverified)
40 mm
1.574803 in
74 kN63 kN———
NSK7210AWDTAngular contact ball bearing
Bore diameter (d)
50 mm
1.968504 in
Outside diameter (D)
90 mm
3.543307 in
Catalogue width (symbol unverified)
40 mm
1.574803 in
74 kN63 kN———
NSK7210BEAT85Angular contact ball bearing
Bore diameter (d)
50 mm
1.968504 in
Outside diameter (D)
90 mm
3.543307 in
Individual bearing width (B)
20 mm
0.787402 in
44 kN29.7 kN——0.453 kg453 g
NSK7210BWAngular contact ball bearing
Bore diameter (d)
50 mm
1.968504 in
Outside diameter (D)
90 mm
3.543307 in
Individual bearing width (B)
20 mm
0.787402 in
41 kN28.6 kN——0.477 kg477 g
NSK7210BWDBAngular contact ball bearing
Bore diameter (d)
50 mm
1.968504 in
Outside diameter (D)
90 mm
3.543307 in
Catalogue width (symbol unverified)
40 mm
1.574803 in
67 kN57 kN———
NSK7210BWDFAngular contact ball bearing
Bore diameter (d)
50 mm
1.968504 in
Outside diameter (D)
90 mm
3.543307 in
Catalogue width (symbol unverified)
40 mm
1.574803 in
67 kN57 kN———
NSK7210BWDTAngular contact ball bearing
Bore diameter (d)
50 mm
1.968504 in
Outside diameter (D)
90 mm
3.543307 in
Catalogue width (symbol unverified)
40 mm
1.574803 in
67 kN57 kN———
KOYO7210BAngular contact ball bearing
Bore diameter (d)
50 mm
1.968504 in
Outside diameter (D)
90 mm
3.543307 in
Width (B)
20 mm
0.787402 in
46.7 kN28.6 kN—5100 rpmLimiting Speeds(Grease Lub.): 5100 min-1Limiting Speeds(Oil Lub.): 6800 min-10.485 kg485 g
KOYO7210BDBAngular contact ball bearing
Bore diameter (d)
50 mm
1.968504 in
Outside diameter (D)
90 mm
3.543307 in
Width (B)
40 mm
1.574803 in
75.9 kN57.3 kN—4000 rpmLimiting Speeds(Grease Lub.): 4000 min-1Limiting Speeds(Oil Lub.): 5400 min-10.97 kg970 g
KOYO7210BDB FYAngular contact ball bearing
Bore diameter (d)
50 mm
1.968504 in
Outside diameter (D)
90 mm
3.543307 in
Width (B)
40 mm
1.574803 in
72.5 kN53.5 kN—5100 rpmLimiting Speeds(Grease Lub.): 5100 min-1Limiting Speeds(Oil Lub.): 6800 min-10.97 kg970 g
KOYO7210BDFAngular contact ball bearing
Bore diameter (d)
50 mm
1.968504 in
Outside diameter (D)
90 mm
3.543307 in
Width (B)
40 mm
1.574803 in
75.9 kN57.3 kN—4000 rpmLimiting Speeds(Grease Lub.): 4000 min-1Limiting Speeds(Oil Lub.): 5400 min-10.97 kg970 g
KOYO7210BDF FYAngular contact ball bearing
Bore diameter (d)
50 mm
1.968504 in
Outside diameter (D)
90 mm
3.543307 in
Width (B)
40 mm
1.574803 in
72.5 kN53.5 kN—5100 rpmLimiting Speeds(Grease Lub.): 5100 min-1Limiting Speeds(Oil Lub.): 6800 min-10.97 kg970 g
KOYO7210BDTAngular contact ball bearing
Bore diameter (d)
50 mm
1.968504 in
Outside diameter (D)
90 mm
3.543307 in
Width (B)
40 mm
1.574803 in
75.9 kN57.3 kN—4000 rpmLimiting Speeds(Grease Lub.): 4000 min-1Limiting Speeds(Oil Lub.): 5400 min-10.97 kg970 g
KOYO7210BDT FYAngular contact ball bearing
Bore diameter (d)
50 mm
1.968504 in
Outside diameter (D)
90 mm
3.543307 in
Width (B)
40 mm
1.574803 in
72.5 kN53.5 kN—5100 rpmLimiting Speeds(Grease Lub.): 5100 min-1Limiting Speeds(Oil Lub.): 6800 min-10.97 kg970 g
KOYO7210B FYAngular contact ball bearing
Bore diameter (d)
50 mm
1.968504 in
Outside diameter (D)
90 mm
3.543307 in
Width (B)
20 mm
0.787402 in
44.6 kN26.7 kN—6400 rpmLimiting Speeds(Grease Lub.): 6400 min-1Limiting Speeds(Oil Lub.): 8500 min-10.485 kg485 g
KOYO7210CAngular contact ball bearing
Bore diameter (d)
50 mm
1.968504 in
Outside diameter (D)
90 mm
3.543307 in
Width (B)
20 mm
0.787402 in
56 kN34.1 kN—9600 rpmLimiting Speeds(Grease Lub.): 9600 min-1Limiting Speeds(Oil Lub.): 12000 min-10.485 kg485 g
KOYO7210CDBAngular contact ball bearing
Bore diameter (d)
50 mm
1.968504 in
Outside diameter (D)
90 mm
3.543307 in
Width (B)
40 mm
1.574803 in
91 kN68.1 kN—7500 rpmLimiting Speeds(Grease Lub.): 7500 min-1Limiting Speeds(Oil Lub.): 9600 min-10.97 kg970 g
KOYO7210CDB FYAngular contact ball bearing
Bore diameter (d)
50 mm
1.968504 in
Outside diameter (D)
90 mm
3.543307 in
Width (B)
40 mm
1.574803 in
86.9 kN63.6 kN—9400 rpmLimiting Speeds(Grease Lub.): 9400 min-1Limiting Speeds(Oil Lub.): 12000 min-10.97 kg970 g
KOYO7210CDFAngular contact ball bearing
Bore diameter (d)
50 mm
1.968504 in
Outside diameter (D)
90 mm
3.543307 in
Width (B)
40 mm
1.574803 in
91 kN68.1 kN—7500 rpmLimiting Speeds(Grease Lub.): 7500 min-1Limiting Speeds(Oil Lub.): 9600 min-10.97 kg970 g
KOYO7210CDF FYAngular contact ball bearing
Bore diameter (d)
50 mm
1.968504 in
Outside diameter (D)
90 mm
3.543307 in
Width (B)
40 mm
1.574803 in
86.9 kN63.6 kN—9400 rpmLimiting Speeds(Grease Lub.): 9400 min-1Limiting Speeds(Oil Lub.): 12000 min-10.97 kg970 g
KOYO7210CDTAngular contact ball bearing
Bore diameter (d)
50 mm
1.968504 in
Outside diameter (D)
90 mm
3.543307 in
Width (B)
40 mm
1.574803 in
91 kN68.1 kN—7500 rpmLimiting Speeds(Grease Lub.): 7500 min-1Limiting Speeds(Oil Lub.): 9600 min-10.97 kg970 g
KOYO7210CDT FYAngular contact ball bearing
Bore diameter (d)
50 mm
1.968504 in
Outside diameter (D)
90 mm
3.543307 in
Width (B)
40 mm
1.574803 in
86.9 kN63.6 kN—9400 rpmLimiting Speeds(Grease Lub.): 9400 min-1Limiting Speeds(Oil Lub.): 12000 min-10.97 kg970 g
KOYO7210C FYAngular contact ball bearing
Bore diameter (d)
50 mm
1.968504 in
Outside diameter (D)
90 mm
3.543307 in
Width (B)
20 mm
0.787402 in
53.5 kN31.8 kN—12000 rpmLimiting Speeds(Grease Lub.): 12000 min-1Limiting Speeds(Oil Lub.): 16000 min-10.485 kg485 g
KOYO7210DBAngular contact ball bearing
Bore diameter (d)
50 mm
1.968504 in
Outside diameter (D)
90 mm
3.543307 in
Width (B)
40 mm
1.574803 in
83.8 kN62.9 kN—5400 rpmLimiting Speeds(Grease Lub.): 5400 min-1Limiting Speeds(Oil Lub.): 6800 min-10.97 kg970 g
KOYO7210DB FYAngular contact ball bearing
Bore diameter (d)
50 mm
1.968504 in
Outside diameter (D)
90 mm
3.543307 in
Width (B)
40 mm
1.574803 in
80 kN58.7 kN—6800 rpmLimiting Speeds(Grease Lub.): 6800 min-1Limiting Speeds(Oil Lub.): 8500 min-10.97 kg970 g
KOYO7210DFAngular contact ball bearing
Bore diameter (d)
50 mm
1.968504 in
Outside diameter (D)
90 mm
3.543307 in
Width (B)
40 mm
1.574803 in
83.8 kN62.9 kN—5400 rpmLimiting Speeds(Grease Lub.): 5400 min-1Limiting Speeds(Oil Lub.): 6800 min-10.97 kg970 g
KOYO7210DF FYAngular contact ball bearing
Bore diameter (d)
50 mm
1.968504 in
Outside diameter (D)
90 mm
3.543307 in
Width (B)
40 mm
1.574803 in
80 kN58.7 kN—6800 rpmLimiting Speeds(Grease Lub.): 6800 min-1Limiting Speeds(Oil Lub.): 8500 min-10.97 kg970 g
KOYO7210DTAngular contact ball bearing
Bore diameter (d)
50 mm
1.968504 in
Outside diameter (D)
90 mm
3.543307 in
Width (B)
40 mm
1.574803 in
83.8 kN62.9 kN—5400 rpmLimiting Speeds(Grease Lub.): 5400 min-1Limiting Speeds(Oil Lub.): 6800 min-10.97 kg970 g
KOYO7210DT FYAngular contact ball bearing
Bore diameter (d)
50 mm
1.968504 in
Outside diameter (D)
90 mm
3.543307 in
Width (B)
40 mm
1.574803 in
80 kN58.7 kN—6800 rpmLimiting Speeds(Grease Lub.): 6800 min-1Limiting Speeds(Oil Lub.): 8500 min-10.97 kg970 g
KOYO7210 FYAngular contact ball bearing
Bore diameter (d)
50 mm
1.968504 in
Outside diameter (D)
90 mm
3.543307 in
Width (B)
20 mm
0.787402 in
49.2 kN29.4 kN—8500 rpmLimiting Speeds(Grease Lub.): 8500 min-1Limiting Speeds(Oil Lub.): 11000 min-10.485 kg485 g
Compare recorded seals, clearance, precision and materials

Manufacturer wording is retained. A missing property is not inferred from another brand or a similar suffix.

Brand / designationClosureOriginal precisionClearanceCageMaterialLubricant
KOYO 7210Not recordedNot recordedNot recordedNot recordedNot recordedNot recorded
NTN 7210Not recordedNot recordedCNpressed steel cageNot recordedNot recorded
SKF 7210 ACCBMWithoutP6Not recordedNon-metallicBearing steelNone
SKF 7210 ACDGA/HCP4AWithoutNot recordedNot recordedNot recordedHybrid (ceramic balls)None
SKF 7210 ACDGA/P4AWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7210 ACDGB/P4AWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7210 ACDGC/P4AWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7210 ACD/HCP4ADBAWithoutNot recordedNot recordedNot recordedHybrid (ceramic balls)None
SKF 7210 ACD/HCP4ADBBWithoutNot recordedNot recordedNot recordedHybrid (ceramic balls)None
SKF 7210 ACD/HCP4AQBCCWithoutNot recordedNot recordedNot recordedHybrid (ceramic balls)None
SKF 7210 ACD/HCP4ATBTAWithoutNot recordedNot recordedNot recordedHybrid (ceramic balls)None
SKF 7210 ACD/P4AWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7210 ACD/P4ADBAWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7210 ACD/P4ADBBWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7210 ACD/P4ADBCWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7210 ACD/P4ADBDWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7210 ACD/P4ADFBWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7210 ACD/P4ADGAWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7210 ACD/P4ADGBWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7210 ACD/P4ADGCWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7210 ACD/P4ADTWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7210 ACD/P4AQBCCWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7210 ACD/P4AQBTAWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7210 ACD/P4AQBTBWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7210 ACD/P4AQGCWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7210 ACD/P4ATBTAWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7210 ACD/P4ATBTBWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7210 ACD/P4ATBTCWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7210 BE-2RZPSeal on both sidesNormalNot recordedNon-metallicBearing steelGrease
SKF 7210 BECBJWithoutP6Not recordedSteel sheet metalBearing steelNone
SKF 7210 BECBMWithoutP6Not recordedMachined brassBearing steelNone
SKF 7210 BECBPWithoutP6Not recordedNon-metallicBearing steelNone
SKF 7210 BECBYWithoutP6Not recordedBrass sheet metalBearing steelNone
SKF 7210 BEGAPWithoutP6Not recordedNon-metallicBearing steelNone
SKF 7210 BEGBPWithoutP6Not recordedNon-metallicBearing steelNone
SKF 7210 BEPWithoutNormalNot recordedNon-metallicBearing steelNone
SKF 7210 CDGA/HCP4AWithoutNot recordedNot recordedNot recordedHybrid (ceramic balls)None
SKF 7210 CDGA/P4AWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7210 CDGB/P4AWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7210 CD/HCP4AWithoutNot recordedNot recordedNot recordedHybrid (ceramic balls)None
SKF 7210 CD/HCP4ADBAWithoutNot recordedNot recordedNot recordedHybrid (ceramic balls)None
SKF 7210 CD/HCP4ADGAWithoutNot recordedNot recordedNot recordedHybrid (ceramic balls)None
SKF 7210 CD/P4AWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7210 CD/P4ADBAWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7210 CD/P4ADBBWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7210 CD/P4ADBCWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7210 CD/P4ADFBWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7210 CD/P4ADGAWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7210 CD/P4ADGBWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7210 CD/P4ADGCWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7210 CD/P4ADGDWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7210 CD/P4ADTWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7210 CD/P4ATBTBWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7210 CD/P4ATGBWithoutNot recordedNot recordedNot recordedBearing steelNone
FAG 7210-B-XL-JPWithout — Not sealedP6 — Class 6 (ISO 492:2023)Not recordedJP — Steel sheet metalNot recordedWithout — Bearing not greased
FAG 7210-B-XL-JP-P5-ULWithout — Not sealedP5 — Class 5 (ISO 492:2023)Not recordedJP — Steel sheet metalNot recordedWithout — Bearing not greased
FAG 7210-B-XL-JP-UAWithout — Not sealedP6 — Class 6 (ISO 492:2023)Not recordedJP — Steel sheet metalNot recordedWithout — Bearing not greased
FAG 7210-B-XL-JP-UOWithout — Not sealedP6 — Class 6 (ISO 492:2023)Not recordedJP — Steel sheet metalNot recordedWithout — Bearing not greased
FAG 7210-B-XL-MPWithout — Not sealedP6 — Class 6 (ISO 492:2023)Not recordedMP — Solid brass cage, ball guidedNot recordedWithout — Bearing not greased
FAG 7210-B-XL-MP-P5-UOWithout — Not sealedP5 — Class 5 (ISO 492:2023)Not recordedMP — Solid brass cage, ball guidedNot recordedWithout — Bearing not greased
FAG 7210-B-XL-MP-UAWithout — Not sealedP6 — Class 6 (ISO 492:2023)Not recordedMP — Solid brass cage, ball guidedNot recordedWithout — Bearing not greased
FAG 7210-B-XL-MP-UBWithout — Not sealedP6 — Class 6 (ISO 492:2023)Not recordedMP — Solid brass cage, ball guidedNot recordedWithout — Bearing not greased
FAG 7210-B-XL-MP-UOWithout — Not sealedP6 — Class 6 (ISO 492:2023)Not recordedMP — Solid brass cage, ball guidedNot recordedWithout — Bearing not greased
FAG 7210-B-XL-TVPWithout — Not sealedP6 — Class 6 (ISO 492:2023)Not recordedTVP — Solid cage made of glass-fiber reinforced polyamid PA66Not recordedWithout — Bearing not greased
FAG 7210-B-XL-TVP-P5Without — Not sealedP5 — Class 5 (ISO 492:2023)Not recordedTVP — Solid cage made of glass-fiber reinforced polyamid PA66Not recordedWithout — Bearing not greased
FAG 7210-B-XL-TVP-P5-ULWithout — Not sealedP5 — Class 5 (ISO 492:2023)Not recordedTVP — Solid cage made of glass-fiber reinforced polyamid PA66Not recordedWithout — Bearing not greased
FAG 7210-B-XL-TVP-P5-UOWithout — Not sealedP5 — Class 5 (ISO 492:2023)Not recordedTVP — Solid cage made of glass-fiber reinforced polyamid PA66Not recordedWithout — Bearing not greased
FAG 7210-B-XL-TVP-UAWithout — Not sealedP6 — Class 6 (ISO 492:2023)Not recordedTVP — Solid cage made of glass-fiber reinforced polyamid PA66Not recordedWithout — Bearing not greased
FAG 7210-B-XL-TVP-UBWithout — Not sealedP6 — Class 6 (ISO 492:2023)Not recordedTVP — Solid cage made of glass-fiber reinforced polyamid PA66Not recordedWithout — Bearing not greased
FAG 7210-B-XL-TVP-UOWithout — Not sealedP6 — Class 6 (ISO 492:2023)Not recordedTVP — Solid cage made of glass-fiber reinforced polyamid PA66Not recordedWithout — Bearing not greased
TIMKEN 7210WNOpenNot recordedNot recordedBrass cageNot recordedNot recorded
TIMKEN 7210WNMBRSUOpenNot recordedNot recordedBrass cageNot recordedNot recorded
TIMKEN 7210WNSUOpenNot recordedNot recordedBrass cageNot recordedNot recorded
NSK 7210AWNot recordedNot recordedNot recordedPressed steelNot recordedNot recorded
NSK 7210AWDBNot recordedNot recordedNot recordedPressed steelNot recordedNot recorded
NSK 7210AWDFNot recordedNot recordedNot recordedPressed steelNot recordedNot recorded
NSK 7210AWDTNot recordedNot recordedNot recordedPressed steelNot recordedNot recorded
NSK 7210BEAT85Not recordedNot recordedNot recordedPolyamide 46 resinNot recordedNot recorded
NSK 7210BWNot recordedNot recordedNot recordedPressed steelNot recordedNot recorded
NSK 7210BWDBNot recordedNot recordedNot recordedPressed steelNot recordedNot recorded
NSK 7210BWDFNot recordedNot recordedNot recordedPressed steelNot recordedNot recorded
NSK 7210BWDTNot recordedNot recordedNot recordedPressed steelNot recordedNot recorded
KOYO 7210BNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 7210BDBNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 7210BDB FYNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 7210BDFNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 7210BDF FYNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 7210BDTNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 7210BDT FYNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 7210B FYNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 7210CNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 7210CDBNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 7210CDB FYNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 7210CDFNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 7210CDF FYNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 7210CDTNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 7210CDT FYNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 7210C FYNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 7210DBNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 7210DB FYNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 7210DFNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 7210DF FYNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 7210DTNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 7210DT FYNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 7210 FYNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded

How to compare these values

  • Use the displayed dimension names and original symbols. Housing length L, height H2 and flange width are not bearing outside diameter D. A catalogue width with an unverified symbol must not be assumed to be inner-ring width B or assembly width T. Open the product record for mounting dimensions and geometry.
  • Inch values are calculated from the recorded millimetres using 25.4 mm per inch, rounded to six decimal places. They do not change a metric bearing into an inch-series bearing. Gram values are converted from the recorded mass in kilograms.
  • C and C0 describe different rating conditions. They are not a single safe working-load limit and cannot replace an application load calculation.
  • Reference and limiting speeds are separate catalogue values. The source grease/oil context is shown where recorded. Lubricant, seals, loads, fit, clearance and cooling affect the usable operating speed.
  • A common base number does not prove equivalent seals, clearance, precision, material or interchangeability. Open the full designation for these fields.
Check load calculations →Estimate rating life →Decode the complete marking →Check replacement evidence →

Related prefix matches — other model numbers may appear

These discovery results can contain a longer number or a different component. They are not specifications for the requested exact model. Open the complete product to inspect its original geometry.

KOYO

7210

Angular contact ball bearing

View full technical record →NTN

7210

Angular contact ball bearing

View full technical record →SKF

7210 ACCBM

Single row angular contact ball bearing with 25° contact angle

View full technical record →SKF

7210 ACDGA/HCP4A

Super-precision, high-capacity, universally matchable single row angular contact ball bearing

View full technical record →SKF

7210 ACDGA/P4A

Super-precision, high-capacity, universally matchable single row angular contact ball bearing

View full technical record →SKF

7210 ACDGB/P4A

Super-precision, high-capacity, universally matchable single row angular contact ball bearing

View full technical record →SKF

7210 ACDGC/P4A

Super-precision, high-capacity, universally matchable single row angular contact ball bearing

View full technical record →SKF

7210 ACD/HCP4ADBA

Matched set of two super-precision, high-capacity, D design, single row angular contact ball bearings

View full technical record →SKF

7210 ACD/HCP4ADBB

Matched set of two super-precision, high-capacity, D design, single row angular contact ball bearings

View full technical record →SKF

7210 ACD/HCP4AQBCC

Matched set of four super-precision, high-capacity, D design, single row angular contact ball bearings

View full technical record →SKF

7210 ACD/HCP4ATBTA

Matched set of three super-precision, high-capacity, D design, single row angular contact ball bearings

View full technical record →SKF

7210 ACD/P4A

Super-precision, high-capacity, single row angular contact ball bearing

View full technical record →
Filter all 105 prefix results →

Check the drawing before substituting

Nominal dimensions are not shaft-fit tolerances. Different variants can add grooves, flanges, wider rings or assembly components. When the table has different dimensions, the complete designation—not the shared prefix—controls.

Measurement guide →Cross-reference checks →

Reference basis & data limits

Manufacturer terminology is retained in the product records. Technical reference basis: JTEKT Basic Bearing Knowledge (boundary dimensions, tolerance classes and lubrication); NSK Bearing ABCs (lubrication, designations and clearance); NTN technical FAQs (closure codes and component interchange); SKF rolling-bearing selection and maintenance references.

Selection workflows and catalogue grouping are BearingScope editorial aids. Verify the current drawing and application requirements before using a candidate. Missing database information is not converted into an assumed match.

Search the consolidated catalogue

Find, filter and compare bearing model data in one place.

Open model search