99,016 bearing records · search, filter and compare

info@bearingscope.com
Find · understand · compare

7209 bearing dimensions & suffix variants

Look up recorded dimensions for designations beginning with 7209. The table retains complete manufacturer designations so special suffixes and different dimensional variants remain visible.

On this page5 sections

Find by measured dimensions

Enter bore d, outside diameter D and width B. Use decimals or inch fractions such as 1/2 or 1 1/4.

For tapered assemblies use total width T; for units or flanged bearings also check the mounting drawing.

Exact model evidence

7209 dimensions and recorded technical data

The recorded 7209 base designation measures 45×85×19 mm (inside diameter d × outside diameter D × width B). This answer uses unsuffixed records from KOYO. It does not assign the same dimensions or operating ratings to every suffix.

The numeric series boundary is preserved: a longer number is not included merely because its first digits match. 102 recorded variants are listed. A dash means the value is missing, not zero.

Brand / full designationNamed dimensions (mm / in)Dynamic C (kN)Static C0 (kN)Reference speed (rpm)Limiting speed (rpm)Mass (kg / g)
KOYO7209Angular contact ball bearing
Bore diameter (d)
45 mm
1.771654 in
Outside diameter (D)
85 mm
3.346457 in
Width (B)
19 mm
0.748031 in
49.6 kN28.6 kN—7500 rpmLimiting Speeds(Grease Lub.): 7500 min-1Limiting Speeds(Oil Lub.): 9600 min-10.43 kg430 g
SKF7209 ACCBMSingle row angular contact ball bearing with 25° contact angle
Bore diameter (d)
45 mm
1.771654 in
Outside diameter (D)
85 mm
3.346457 in
Width (B)
19 mm
0.748031 in
44 kN32 kN10000 rpm15000 rpm0.442 kg442 g
SKF7209 ACDGA/HCP4ASuper-precision, high-capacity, universally matchable single row angular contact ball bearing
Bore diameter (d)
45 mm
1.771654 in
Outside diameter (D)
85 mm
3.346457 in
Width (B)
19 mm
0.748031 in
41 kN30 kN——0.364 kg364 g
SKF7209 ACDGA/P4ASuper-precision, high-capacity, universally matchable single row angular contact ball bearing
Bore diameter (d)
45 mm
1.771654 in
Outside diameter (D)
85 mm
3.346457 in
Width (B)
19 mm
0.748031 in
41 kN30 kN——0.432 kg432 g
SKF7209 ACDGB/P4ASuper-precision, high-capacity, universally matchable single row angular contact ball bearing
Bore diameter (d)
45 mm
1.771654 in
Outside diameter (D)
85 mm
3.346457 in
Width (B)
19 mm
0.748031 in
41 kN30 kN——0.432 kg432 g
SKF7209 ACDGC/P4ASuper-precision, high-capacity, universally matchable single row angular contact ball bearing
Bore diameter (d)
45 mm
1.771654 in
Outside diameter (D)
85 mm
3.346457 in
Width (B)
19 mm
0.748031 in
41 kN30 kN——0.432 kg432 g
SKF7209 ACD/HCP4ADBCMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
45 mm
1.771654 in
Outside diameter (D)
85 mm
3.346457 in
Width (B)
38 mm
1.496063 in
66.3 kN60 kN——0.728 kg728 g
SKF7209 ACD/HCP4ADGAMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
45 mm
1.771654 in
Outside diameter (D)
85 mm
3.346457 in
Width (B)
38 mm
1.496063 in
66.3 kN60 kN——0.728 kg728 g
SKF7209 ACD/HCP4ADGBMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
45 mm
1.771654 in
Outside diameter (D)
85 mm
3.346457 in
Width (B)
38 mm
1.496063 in
66.3 kN60 kN——0.728 kg728 g
SKF7209 ACD/HCP4AQBCAMatched set of four super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
45 mm
1.771654 in
Outside diameter (D)
85 mm
3.346457 in
Width (B)
76 mm
2.992126 in
108 kN118 kN——1.37 kg1370 g
SKF7209 ACD/HCP4ATBTBMatched set of three super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
45 mm
1.771654 in
Outside diameter (D)
85 mm
3.346457 in
Width (B)
57 mm
2.244094 in
88.4 kN90 kN——1.09 kg1090 g
SKF7209 ACD/P4ASuper-precision, high-capacity, single row angular contact ball bearing
Bore diameter (d)
45 mm
1.771654 in
Outside diameter (D)
85 mm
3.346457 in
Width (B)
19 mm
0.748031 in
41 kN30 kN——0.432 kg432 g
SKF7209 ACD/P4ADBAMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
45 mm
1.771654 in
Outside diameter (D)
85 mm
3.346457 in
Width (B)
38 mm
1.496063 in
66.3 kN60 kN——0.846 kg846 g
SKF7209 ACD/P4ADBBMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
45 mm
1.771654 in
Outside diameter (D)
85 mm
3.346457 in
Width (B)
38 mm
1.496063 in
66.3 kN60 kN——0.846 kg846 g
SKF7209 ACD/P4ADBCMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
45 mm
1.771654 in
Outside diameter (D)
85 mm
3.346457 in
Width (B)
38 mm
1.496063 in
66.3 kN60 kN——0.846 kg846 g
SKF7209 ACD/P4ADFAMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
45 mm
1.771654 in
Outside diameter (D)
85 mm
3.346457 in
Width (B)
38 mm
1.496063 in
66.3 kN60 kN——0.846 kg846 g
SKF7209 ACD/P4ADFBMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
45 mm
1.771654 in
Outside diameter (D)
85 mm
3.346457 in
Width (B)
38 mm
1.496063 in
66.3 kN60 kN——0.846 kg846 g
SKF7209 ACD/P4ADGAMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
45 mm
1.771654 in
Outside diameter (D)
85 mm
3.346457 in
Width (B)
38 mm
1.496063 in
66.3 kN60 kN——0.846 kg846 g
SKF7209 ACD/P4ADGBMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
45 mm
1.771654 in
Outside diameter (D)
85 mm
3.346457 in
Width (B)
38 mm
1.496063 in
66.3 kN60 kN——0.846 kg846 g
SKF7209 ACD/P4ADGCMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
45 mm
1.771654 in
Outside diameter (D)
85 mm
3.346457 in
Width (B)
38 mm
1.496063 in
66.3 kN60 kN——0.846 kg846 g
SKF7209 ACD/P4ADTMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
45 mm
1.771654 in
Outside diameter (D)
85 mm
3.346457 in
Width (B)
38 mm
1.496063 in
66.3 kN60 kN——0.846 kg846 g
SKF7209 ACD/P4AQBCAMatched set of four super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
45 mm
1.771654 in
Outside diameter (D)
85 mm
3.346457 in
Width (B)
76 mm
2.992126 in
108 kN118 kN——1.64 kg1640 g
SKF7209 ACD/P4ATBTBMatched set of three super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
45 mm
1.771654 in
Outside diameter (D)
85 mm
3.346457 in
Width (B)
57 mm
2.244094 in
88.4 kN90 kN——1.3 kg1300 g
SKF7209 ACD/P4ATBTCMatched set of three super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
45 mm
1.771654 in
Outside diameter (D)
85 mm
3.346457 in
Width (B)
57 mm
2.244094 in
88.4 kN90 kN——1.3 kg1300 g
SKF7209 BE-2RZPSingle row angular contact ball bearing with 40° contact angle and non-contact seals on both sides
Bore diameter (d)
45 mm
1.771654 in
Outside diameter (D)
85 mm
3.346457 in
Width (B)
19 mm
0.748031 in
35.8 kN26 kN10000 rpm7500 rpm0.412 kg412 g
SKF7209 BECBJSingle row angular contact ball bearing
Bore diameter (d)
45 mm
1.771654 in
Outside diameter (D)
85 mm
3.346457 in
Width (B)
19 mm
0.748031 in
38 kN28.5 kN10000 rpm10000 rpm0.43 kg430 g
SKF7209 BECBMSingle row angular contact ball bearing
Bore diameter (d)
45 mm
1.771654 in
Outside diameter (D)
85 mm
3.346457 in
Width (B)
19 mm
0.748031 in
38 kN28.5 kN10000 rpm13000 rpm0.442 kg442 g
SKF7209 BECBPSingle row angular contact ball bearing
Bore diameter (d)
45 mm
1.771654 in
Outside diameter (D)
85 mm
3.346457 in
Width (B)
19 mm
0.748031 in
38 kN28.5 kN10000 rpm10000 rpm0.405 kg405 g
SKF7209 BECBYSingle row angular contact ball bearing
Bore diameter (d)
45 mm
1.771654 in
Outside diameter (D)
85 mm
3.346457 in
Width (B)
19 mm
0.748031 in
38 kN28.5 kN10000 rpm10000 rpm0.434 kg434 g
SKF7209 BEGAPSingle row angular contact ball bearing
Bore diameter (d)
45 mm
1.771654 in
Outside diameter (D)
85 mm
3.346457 in
Width (B)
19 mm
0.748031 in
38 kN28.5 kN10000 rpm10000 rpm0.405 kg405 g
SKF7209 BEGAPHSingle row angular contact ball bearing
Bore diameter (d)
45 mm
1.771654 in
Outside diameter (D)
85 mm
3.346457 in
Width (B)
19 mm
0.748031 in
38 kN28.5 kN10000 rpm10000 rpm0.405 kg405 g
SKF7209 BEPSingle row angular contact ball bearing
Bore diameter (d)
45 mm
1.771654 in
Outside diameter (D)
85 mm
3.346457 in
Width (B)
19 mm
0.748031 in
35.8 kN26 kN10000 rpm9000 rpm0.405 kg405 g
SKF7209 CDGA/HCP4ASuper-precision, high-capacity, universally matchable single row angular contact ball bearing
Bore diameter (d)
45 mm
1.771654 in
Outside diameter (D)
85 mm
3.346457 in
Width (B)
19 mm
0.748031 in
42.3 kN31 kN——0.364 kg364 g
SKF7209 CDGA/P4ASuper-precision, high-capacity, universally matchable single row angular contact ball bearing
Bore diameter (d)
45 mm
1.771654 in
Outside diameter (D)
85 mm
3.346457 in
Width (B)
19 mm
0.748031 in
42.3 kN31 kN——0.412 kg412 g
SKF7209 CDGB/P4ASuper-precision, high-capacity, universally matchable single row angular contact ball bearing
Bore diameter (d)
45 mm
1.771654 in
Outside diameter (D)
85 mm
3.346457 in
Width (B)
19 mm
0.748031 in
42.3 kN31 kN——0.432 kg432 g
SKF7209 CD/HCP4ASuper-precision, high-capacity, single row angular contact ball bearing
Bore diameter (d)
45 mm
1.771654 in
Outside diameter (D)
85 mm
3.346457 in
Width (B)
19 mm
0.748031 in
42.3 kN31 kN——0.364 kg364 g
SKF7209 CD/HCP4ADBAMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
45 mm
1.771654 in
Outside diameter (D)
85 mm
3.346457 in
Width (B)
38 mm
1.496063 in
70.2 kN62 kN——0.728 kg728 g
SKF7209 CD/HCP4ADGBMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
45 mm
1.771654 in
Outside diameter (D)
85 mm
3.346457 in
Width (B)
38 mm
1.496063 in
70.2 kN62 kN——0.728 kg728 g
SKF7209 CD/HCP4ADGCMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
45 mm
1.771654 in
Outside diameter (D)
85 mm
3.346457 in
Width (B)
38 mm
1.496063 in
70.2 kN62 kN——0.728 kg728 g
SKF7209 CD/P4ASuper-precision, high-capacity, single row angular contact ball bearing
Bore diameter (d)
45 mm
1.771654 in
Outside diameter (D)
85 mm
3.346457 in
Width (B)
19 mm
0.748031 in
42.3 kN31 kN——0.403 kg403 g
SKF7209 CD/P4ADBAMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
45 mm
1.771654 in
Outside diameter (D)
85 mm
3.346457 in
Width (B)
38 mm
1.496063 in
70.2 kN62 kN——0.807 kg807 g
SKF7209 CD/P4ADBBMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
45 mm
1.771654 in
Outside diameter (D)
85 mm
3.346457 in
Width (B)
38 mm
1.496063 in
70.2 kN62 kN——0.864 kg864 g
SKF7209 CD/P4ADBCMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
45 mm
1.771654 in
Outside diameter (D)
85 mm
3.346457 in
Width (B)
38 mm
1.496063 in
70.2 kN62 kN——0.864 kg864 g
SKF7209 CD/P4ADGAMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
45 mm
1.771654 in
Outside diameter (D)
85 mm
3.346457 in
Width (B)
38 mm
1.496063 in
70.2 kN62 kN——0.864 kg864 g
SKF7209 CD/P4ADGBMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
45 mm
1.771654 in
Outside diameter (D)
85 mm
3.346457 in
Width (B)
38 mm
1.496063 in
70.2 kN62 kN——0.864 kg864 g
SKF7209 CD/P4ADGCMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
45 mm
1.771654 in
Outside diameter (D)
85 mm
3.346457 in
Width (B)
38 mm
1.496063 in
70.2 kN62 kN——0.846 kg846 g
SKF7209 CD/P4ADGDMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
45 mm
1.771654 in
Outside diameter (D)
85 mm
3.346457 in
Width (B)
38 mm
1.496063 in
70.2 kN62 kN——0.846 kg846 g
SKF7209 CD/P4ADTMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
45 mm
1.771654 in
Outside diameter (D)
85 mm
3.346457 in
Width (B)
38 mm
1.496063 in
70.2 kN62 kN——0.846 kg846 g
SKF7209 CD/P4ATBTAMatched set of three super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
45 mm
1.771654 in
Outside diameter (D)
85 mm
3.346457 in
Width (B)
57 mm
2.244094 in
92.3 kN93 kN——1.3 kg1300 g
SKF7209 CD/P4ATBTBMatched set of three super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
45 mm
1.771654 in
Outside diameter (D)
85 mm
3.346457 in
Width (B)
57 mm
2.244094 in
92.3 kN93 kN——1.3 kg1300 g
FAG7209-B-XL-2RS-TVPAngular contact ball bearing
Bore diameter (d)
45 mm
1.771654 in
Outside diameter (D)
85 mm
3.346457 in
Width (B)
19 mm
0.748031 in
40 kN27 kN—4550 rpm0.414 kg414 g
FAG7209-B-XL-JPAngular contact ball bearing
Bore diameter (d)
45 mm
1.771654 in
Outside diameter (D)
85 mm
3.346457 in
Width (B)
19 mm
0.748031 in
40 kN27 kN8000 rpm11000 rpm0.428 kg428 g
FAG7209-B-XL-JP-UAAngular contact ball bearing
Bore diameter (d)
45 mm
1.771654 in
Outside diameter (D)
85 mm
3.346457 in
Width (B)
19 mm
0.748031 in
40 kN27 kN8000 rpm11000 rpm0.425 kg425 g
FAG7209-B-XL-JP-UOAngular contact ball bearing
Bore diameter (d)
45 mm
1.771654 in
Outside diameter (D)
85 mm
3.346457 in
Width (B)
19 mm
0.748031 in
40 kN27 kN8000 rpm11000 rpm0.425 kg425 g
FAG7209-B-XL-MPAngular contact ball bearing
Bore diameter (d)
45 mm
1.771654 in
Outside diameter (D)
85 mm
3.346457 in
Width (B)
19 mm
0.748031 in
40 kN27 kN8000 rpm14300 rpm0.455 kg455 g
FAG7209-B-XL-MP-P6-UAAngular contact ball bearing
Bore diameter (d)
45 mm
1.771654 in
Outside diameter (D)
85 mm
3.346457 in
Width (B)
19 mm
0.748031 in
40 kN27 kN8000 rpm14300 rpm0.455 kg455 g
FAG7209-B-XL-MP-UAAngular contact ball bearing
Bore diameter (d)
45 mm
1.771654 in
Outside diameter (D)
85 mm
3.346457 in
Width (B)
19 mm
0.748031 in
40 kN27 kN8000 rpm14300 rpm0.455 kg455 g
FAG7209-B-XL-MP-UBAngular contact ball bearing
Bore diameter (d)
45 mm
1.771654 in
Outside diameter (D)
85 mm
3.346457 in
Width (B)
19 mm
0.748031 in
40 kN27 kN8000 rpm14300 rpm0.455 kg455 g
FAG7209-B-XL-MP-UOAngular contact ball bearing
Bore diameter (d)
45 mm
1.771654 in
Outside diameter (D)
85 mm
3.346457 in
Width (B)
19 mm
0.748031 in
40 kN27 kN8000 rpm14300 rpm0.455 kg455 g
FAG7209-B-XL-TVPAngular contact ball bearing
Bore diameter (d)
45 mm
1.771654 in
Outside diameter (D)
85 mm
3.346457 in
Width (B)
19 mm
0.748031 in
40 kN27 kN8000 rpm11000 rpm0.405 kg405 g
FAG7209-B-XL-TVP-P5Angular contact ball bearing
Bore diameter (d)
45 mm
1.771654 in
Outside diameter (D)
85 mm
3.346457 in
Width (B)
19 mm
0.748031 in
40 kN27 kN8000 rpm11000 rpm0.425 kg425 g
FAG7209-B-XL-TVP-P5-UHAngular contact ball bearing
Bore diameter (d)
45 mm
1.771654 in
Outside diameter (D)
85 mm
3.346457 in
Width (B)
19 mm
0.748031 in
40 kN27 kN8000 rpm11000 rpm0.425 kg425 g
FAG7209-B-XL-TVP-P5-UMAngular contact ball bearing
Bore diameter (d)
45 mm
1.771654 in
Outside diameter (D)
85 mm
3.346457 in
Width (B)
19 mm
0.748031 in
40 kN27 kN8000 rpm11000 rpm0.425 kg425 g
FAG7209-B-XL-TVP-P5-UOAngular contact ball bearing
Bore diameter (d)
45 mm
1.771654 in
Outside diameter (D)
85 mm
3.346457 in
Width (B)
19 mm
0.748031 in
40 kN27 kN8000 rpm11000 rpm0.425 kg425 g
FAG7209-B-XL-TVP-UAAngular contact ball bearing
Bore diameter (d)
45 mm
1.771654 in
Outside diameter (D)
85 mm
3.346457 in
Width (B)
19 mm
0.748031 in
40 kN27 kN8000 rpm11000 rpm0.405 kg405 g
FAG7209-B-XL-TVP-UBAngular contact ball bearing
Bore diameter (d)
45 mm
1.771654 in
Outside diameter (D)
85 mm
3.346457 in
Width (B)
19 mm
0.748031 in
40 kN27 kN8000 rpm11000 rpm0.405 kg405 g
FAG7209-B-XL-TVP-UOAngular contact ball bearing
Bore diameter (d)
45 mm
1.771654 in
Outside diameter (D)
85 mm
3.346457 in
Width (B)
19 mm
0.748031 in
40 kN27 kN8000 rpm11000 rpm0.405 kg405 g
TIMKEN7209WNAngular contact ball bearing
Recorded bore (d)
45 mm
1.771654 in
Recorded outside dimension (D)
85 mm
3.346457 in
Catalogue width (symbol unverified)
19 mm
0.748031 in
36 kN26.3 kN——0.44 kg440 g
TIMKEN7209WNMBRSUAngular contact ball bearing
Recorded bore (d)
45 mm
1.771654 in
Recorded outside dimension (D)
85 mm
3.346457 in
Catalogue width (symbol unverified)
19 mm
0.748031 in
36 kN26.3 kN——0.44 kg440 g
TIMKEN7209WNSUAngular contact ball bearing
Recorded bore (d)
45 mm
1.771654 in
Recorded outside dimension (D)
85 mm
3.346457 in
Catalogue width (symbol unverified)
19 mm
0.748031 in
36 kN26.3 kN——0.44 kg440 g
NSK7209AWAngular contact ball bearing
Bore diameter (d)
45 mm
1.771654 in
Outside diameter (D)
85 mm
3.346457 in
Individual bearing width (B)
19 mm
0.748031 in
43.5 kN28.7 kN——0.411 kg411 g
NSK7209AWDBAngular contact ball bearing
Bore diameter (d)
45 mm
1.771654 in
Outside diameter (D)
85 mm
3.346457 in
Catalogue width (symbol unverified)
38 mm
1.496063 in
71 kN57.5 kN———
NSK7209AWDFAngular contact ball bearing
Bore diameter (d)
45 mm
1.771654 in
Outside diameter (D)
85 mm
3.346457 in
Catalogue width (symbol unverified)
38 mm
1.496063 in
71 kN57.5 kN———
NSK7209AWDTAngular contact ball bearing
Bore diameter (d)
45 mm
1.771654 in
Outside diameter (D)
85 mm
3.346457 in
Catalogue width (symbol unverified)
38 mm
1.496063 in
71 kN57.5 kN———
NSK7209BEAT85Angular contact ball bearing
Bore diameter (d)
45 mm
1.771654 in
Outside diameter (D)
85 mm
3.346457 in
Individual bearing width (B)
19 mm
0.748031 in
42.5 kN27.1 kN——0.4 kg400 g
NSK7209BWAngular contact ball bearing
Bore diameter (d)
45 mm
1.771654 in
Outside diameter (D)
85 mm
3.346457 in
Individual bearing width (B)
19 mm
0.748031 in
39.5 kN26.2 kN——0.421 kg421 g
NSK7209BWDBAngular contact ball bearing
Bore diameter (d)
45 mm
1.771654 in
Outside diameter (D)
85 mm
3.346457 in
Catalogue width (symbol unverified)
38 mm
1.496063 in
64.5 kN52.5 kN———
NSK7209BWDFAngular contact ball bearing
Bore diameter (d)
45 mm
1.771654 in
Outside diameter (D)
85 mm
3.346457 in
Catalogue width (symbol unverified)
38 mm
1.496063 in
64.5 kN52.5 kN———
NSK7209BWDTAngular contact ball bearing
Bore diameter (d)
45 mm
1.771654 in
Outside diameter (D)
85 mm
3.346457 in
Catalogue width (symbol unverified)
38 mm
1.496063 in
64.5 kN52.5 kN———
KOYO7209BAngular contact ball bearing
Bore diameter (d)
45 mm
1.771654 in
Outside diameter (D)
85 mm
3.346457 in
Width (B)
19 mm
0.748031 in
45.1 kN26.1 kN—5600 rpmLimiting Speeds(Grease Lub.): 5600 min-1Limiting Speeds(Oil Lub.): 7500 min-10.43 kg430 g
KOYO7209BDBAngular contact ball bearing
Bore diameter (d)
45 mm
1.771654 in
Outside diameter (D)
85 mm
3.346457 in
Width (B)
38 mm
1.496063 in
73.2 kN52.3 kN—4400 rpmLimiting Speeds(Grease Lub.): 4400 min-1Limiting Speeds(Oil Lub.): 6000 min-10.86 kg860 g
KOYO7209BDB FYAngular contact ball bearing
Bore diameter (d)
45 mm
1.771654 in
Outside diameter (D)
85 mm
3.346457 in
Width (B)
38 mm
1.496063 in
69.7 kN48.6 kN—5600 rpmLimiting Speeds(Grease Lub.): 5600 min-1Limiting Speeds(Oil Lub.): 7500 min-10.86 kg860 g
KOYO7209BDFAngular contact ball bearing
Bore diameter (d)
45 mm
1.771654 in
Outside diameter (D)
85 mm
3.346457 in
Width (B)
38 mm
1.496063 in
73.2 kN52.3 kN—4400 rpmLimiting Speeds(Grease Lub.): 4400 min-1Limiting Speeds(Oil Lub.): 6000 min-10.86 kg860 g
KOYO7209BDF FYAngular contact ball bearing
Bore diameter (d)
45 mm
1.771654 in
Outside diameter (D)
85 mm
3.346457 in
Width (B)
38 mm
1.496063 in
69.7 kN48.6 kN—5600 rpmLimiting Speeds(Grease Lub.): 5600 min-1Limiting Speeds(Oil Lub.): 7500 min-10.86 kg860 g
KOYO7209BDTAngular contact ball bearing
Bore diameter (d)
45 mm
1.771654 in
Outside diameter (D)
85 mm
3.346457 in
Width (B)
38 mm
1.496063 in
73.2 kN52.3 kN—4400 rpmLimiting Speeds(Grease Lub.): 4400 min-1Limiting Speeds(Oil Lub.): 6000 min-10.86 kg860 g
KOYO7209BDT FYAngular contact ball bearing
Bore diameter (d)
45 mm
1.771654 in
Outside diameter (D)
85 mm
3.346457 in
Width (B)
38 mm
1.496063 in
69.7 kN48.6 kN—5600 rpmLimiting Speeds(Grease Lub.): 5600 min-1Limiting Speeds(Oil Lub.): 7500 min-10.86 kg860 g
KOYO7209B FYAngular contact ball bearing
Bore diameter (d)
45 mm
1.771654 in
Outside diameter (D)
85 mm
3.346457 in
Width (B)
19 mm
0.748031 in
42.9 kN24.3 kN—7000 rpmLimiting Speeds(Grease Lub.): 7000 min-1Limiting Speeds(Oil Lub.): 9400 min-10.43 kg430 g
KOYO7209CAngular contact ball bearing
Bore diameter (d)
45 mm
1.771654 in
Outside diameter (D)
85 mm
3.346457 in
Width (B)
19 mm
0.748031 in
53.6 kN30.9 kN—10000 rpmLimiting Speeds(Grease Lub.): 10000 min-1Limiting Speeds(Oil Lub.): 13000 min-10.43 kg430 g
KOYO7209CDBAngular contact ball bearing
Bore diameter (d)
45 mm
1.771654 in
Outside diameter (D)
85 mm
3.346457 in
Width (B)
38 mm
1.496063 in
87.1 kN61.8 kN—8000 rpmLimiting Speeds(Grease Lub.): 8000 min-1Limiting Speeds(Oil Lub.): 11000 min-10.86 kg860 g
KOYO7209CDB FYAngular contact ball bearing
Bore diameter (d)
45 mm
1.771654 in
Outside diameter (D)
85 mm
3.346457 in
Width (B)
38 mm
1.496063 in
82.9 kN57.4 kN—10000 rpmLimiting Speeds(Grease Lub.): 10000 min-1Limiting Speeds(Oil Lub.): 14000 min-10.86 kg860 g
KOYO7209CDFAngular contact ball bearing
Bore diameter (d)
45 mm
1.771654 in
Outside diameter (D)
85 mm
3.346457 in
Width (B)
38 mm
1.496063 in
87.1 kN61.8 kN—8000 rpmLimiting Speeds(Grease Lub.): 8000 min-1Limiting Speeds(Oil Lub.): 11000 min-10.86 kg860 g
KOYO7209CDF FYAngular contact ball bearing
Bore diameter (d)
45 mm
1.771654 in
Outside diameter (D)
85 mm
3.346457 in
Width (B)
38 mm
1.496063 in
82.9 kN57.4 kN—10000 rpmLimiting Speeds(Grease Lub.): 10000 min-1Limiting Speeds(Oil Lub.): 14000 min-10.86 kg860 g
KOYO7209CDTAngular contact ball bearing
Bore diameter (d)
45 mm
1.771654 in
Outside diameter (D)
85 mm
3.346457 in
Width (B)
38 mm
1.496063 in
87.1 kN61.8 kN—8000 rpmLimiting Speeds(Grease Lub.): 8000 min-1Limiting Speeds(Oil Lub.): 11000 min-10.86 kg860 g
KOYO7209CDT FYAngular contact ball bearing
Bore diameter (d)
45 mm
1.771654 in
Outside diameter (D)
85 mm
3.346457 in
Width (B)
38 mm
1.496063 in
82.9 kN57.4 kN—10000 rpmLimiting Speeds(Grease Lub.): 10000 min-1Limiting Speeds(Oil Lub.): 14000 min-10.86 kg860 g
KOYO7209C FYAngular contact ball bearing
Bore diameter (d)
45 mm
1.771654 in
Outside diameter (D)
85 mm
3.346457 in
Width (B)
19 mm
0.748031 in
51 kN28.7 kN—13000 rpmLimiting Speeds(Grease Lub.): 13000 min-1Limiting Speeds(Oil Lub.): 17000 min-10.43 kg430 g
KOYO7209DBAngular contact ball bearing
Bore diameter (d)
45 mm
1.771654 in
Outside diameter (D)
85 mm
3.346457 in
Width (B)
38 mm
1.496063 in
80.5 kN57.2 kN—6000 rpmLimiting Speeds(Grease Lub.): 6000 min-1Limiting Speeds(Oil Lub.): 7500 min-10.86 kg860 g
KOYO7209DB FYAngular contact ball bearing
Bore diameter (d)
45 mm
1.771654 in
Outside diameter (D)
85 mm
3.346457 in
Width (B)
38 mm
1.496063 in
76.6 kN53.2 kN—7500 rpmLimiting Speeds(Grease Lub.): 7500 min-1Limiting Speeds(Oil Lub.): 9400 min-10.86 kg860 g
KOYO7209DFAngular contact ball bearing
Bore diameter (d)
45 mm
1.771654 in
Outside diameter (D)
85 mm
3.346457 in
Width (B)
38 mm
1.496063 in
80.5 kN57.2 kN—6000 rpmLimiting Speeds(Grease Lub.): 6000 min-1Limiting Speeds(Oil Lub.): 7500 min-10.86 kg860 g
KOYO7209DF FYAngular contact ball bearing
Bore diameter (d)
45 mm
1.771654 in
Outside diameter (D)
85 mm
3.346457 in
Width (B)
38 mm
1.496063 in
76.6 kN53.2 kN—7500 rpmLimiting Speeds(Grease Lub.): 7500 min-1Limiting Speeds(Oil Lub.): 9400 min-10.86 kg860 g
KOYO7209DTAngular contact ball bearing
Bore diameter (d)
45 mm
1.771654 in
Outside diameter (D)
85 mm
3.346457 in
Width (B)
38 mm
1.496063 in
80.5 kN57.2 kN—6000 rpmLimiting Speeds(Grease Lub.): 6000 min-1Limiting Speeds(Oil Lub.): 7500 min-10.86 kg860 g
KOYO7209DT FYAngular contact ball bearing
Bore diameter (d)
45 mm
1.771654 in
Outside diameter (D)
85 mm
3.346457 in
Width (B)
38 mm
1.496063 in
76.6 kN53.2 kN—7500 rpmLimiting Speeds(Grease Lub.): 7500 min-1Limiting Speeds(Oil Lub.): 9400 min-10.86 kg860 g
KOYO7209 FYAngular contact ball bearing
Bore diameter (d)
45 mm
1.771654 in
Outside diameter (D)
85 mm
3.346457 in
Width (B)
19 mm
0.748031 in
47.2 kN26.6 kN—9400 rpmLimiting Speeds(Grease Lub.): 9400 min-1Limiting Speeds(Oil Lub.): 12000 min-10.43 kg430 g
Compare recorded seals, clearance, precision and materials

Manufacturer wording is retained. A missing property is not inferred from another brand or a similar suffix.

Brand / designationClosureOriginal precisionClearanceCageMaterialLubricant
KOYO 7209Not recordedNot recordedNot recordedNot recordedNot recordedNot recorded
SKF 7209 ACCBMWithoutP6Not recordedMachined brassBearing steelNone
SKF 7209 ACDGA/HCP4AWithoutNot recordedNot recordedNot recordedHybrid (ceramic balls)None
SKF 7209 ACDGA/P4AWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7209 ACDGB/P4AWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7209 ACDGC/P4AWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7209 ACD/HCP4ADBCWithoutNot recordedNot recordedNot recordedHybrid (ceramic balls)None
SKF 7209 ACD/HCP4ADGAWithoutNot recordedNot recordedNot recordedHybrid (ceramic balls)None
SKF 7209 ACD/HCP4ADGBWithoutNot recordedNot recordedNot recordedHybrid (ceramic balls)None
SKF 7209 ACD/HCP4AQBCAWithoutNot recordedNot recordedNot recordedHybrid (ceramic balls)None
SKF 7209 ACD/HCP4ATBTBWithoutNot recordedNot recordedNot recordedHybrid (ceramic balls)None
SKF 7209 ACD/P4AWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7209 ACD/P4ADBAWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7209 ACD/P4ADBBWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7209 ACD/P4ADBCWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7209 ACD/P4ADFAWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7209 ACD/P4ADFBWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7209 ACD/P4ADGAWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7209 ACD/P4ADGBWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7209 ACD/P4ADGCWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7209 ACD/P4ADTWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7209 ACD/P4AQBCAWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7209 ACD/P4ATBTBWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7209 ACD/P4ATBTCWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7209 BE-2RZPSeal on both sidesNormalNot recordedNon-metallicBearing steelGrease
SKF 7209 BECBJWithoutP6Not recordedSteel sheet metalBearing steelNone
SKF 7209 BECBMWithoutP6Not recordedMachined brassBearing steelNone
SKF 7209 BECBPWithoutP6Not recordedNon-metallicBearing steelNone
SKF 7209 BECBYWithoutP6Not recordedBrass sheet metalBearing steelNone
SKF 7209 BEGAPWithoutP6Not recordedNon-metallicBearing steelNone
SKF 7209 BEGAPHWithoutP6Not recordedNon-metallicBearing steelNone
SKF 7209 BEPWithoutNormalNot recordedNon-metallicBearing steelNone
SKF 7209 CDGA/HCP4AWithoutNot recordedNot recordedNot recordedHybrid (ceramic balls)None
SKF 7209 CDGA/P4AWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7209 CDGB/P4AWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7209 CD/HCP4AWithoutNot recordedNot recordedNot recordedHybrid (ceramic balls)None
SKF 7209 CD/HCP4ADBAWithoutNot recordedNot recordedNot recordedHybrid (ceramic balls)None
SKF 7209 CD/HCP4ADGBWithoutNot recordedNot recordedNot recordedHybrid (ceramic balls)None
SKF 7209 CD/HCP4ADGCWithoutNot recordedNot recordedNot recordedHybrid (ceramic balls)None
SKF 7209 CD/P4AWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7209 CD/P4ADBAWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7209 CD/P4ADBBWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7209 CD/P4ADBCWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7209 CD/P4ADGAWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7209 CD/P4ADGBWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7209 CD/P4ADGCWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7209 CD/P4ADGDWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7209 CD/P4ADTWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7209 CD/P4ATBTAWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7209 CD/P4ATBTBWithoutNot recordedNot recordedNot recordedBearing steelNone
FAG 7209-B-XL-2RS-TVP2RS — Contact seal on both sidesP6 — Class 6 (ISO 492:2023)Not recordedTVP — Solid cage made of glass-fiber reinforced polyamid PA66Not recordedGA13 — Ball bearing and insert bearing grease
FAG 7209-B-XL-JPWithout — Not sealedP6 — Class 6 (ISO 492:2023)Not recordedJP — Steel sheet metalNot recordedWithout — Bearing not greased
FAG 7209-B-XL-JP-UAWithout — Not sealedP6 — Class 6 (ISO 492:2023)Not recordedJP — Steel sheet metalNot recordedWithout — Bearing not greased
FAG 7209-B-XL-JP-UOWithout — Not sealedP6 — Class 6 (ISO 492:2023)Not recordedJP — Steel sheet metalNot recordedWithout — Bearing not greased
FAG 7209-B-XL-MPWithout — Not sealedP6 — Class 6 (ISO 492:2023)Not recordedMP — Solid brass cage, ball guidedNot recordedWithout — Bearing not greased
FAG 7209-B-XL-MP-P6-UAWithout — Not sealedP6 — Class 6 (ISO 492:2023)Not recordedMP — Solid brass cage, ball guidedNot recordedWithout — Bearing not greased
FAG 7209-B-XL-MP-UAWithout — Not sealedP6 — Class 6 (ISO 492:2023)Not recordedMP — Solid brass cage, ball guidedNot recordedWithout — Bearing not greased
FAG 7209-B-XL-MP-UBWithout — Not sealedP6 — Class 6 (ISO 492:2023)Not recordedMP — Solid brass cage, ball guidedNot recordedWithout — Bearing not greased
FAG 7209-B-XL-MP-UOWithout — Not sealedP6 — Class 6 (ISO 492:2023)Not recordedMP — Solid brass cage, ball guidedNot recordedWithout — Bearing not greased
FAG 7209-B-XL-TVPWithout — Not sealedP6 — Class 6 (ISO 492:2023)Not recordedTVP — Solid cage made of glass-fiber reinforced polyamid PA66Not recordedWithout — Bearing not greased
FAG 7209-B-XL-TVP-P5Without — Not sealedP5 — Class 5 (ISO 492:2023)Not recordedTVP — Solid cage made of glass-fiber reinforced polyamid PA66Not recordedWithout — Bearing not greased
FAG 7209-B-XL-TVP-P5-UHWithout — Not sealedP5 — Class 5 (ISO 492:2023)Not recordedTVP — Solid cage made of glass-fiber reinforced polyamid PA66Not recordedWithout — Bearing not greased
FAG 7209-B-XL-TVP-P5-UMWithout — Not sealedP5 — Class 5 (ISO 492:2023)Not recordedTVP — Solid cage made of glass-fiber reinforced polyamid PA66Not recordedWithout — Bearing not greased
FAG 7209-B-XL-TVP-P5-UOWithout — Not sealedP5 — Class 5 (ISO 492:2023)Not recordedTVP — Solid cage made of glass-fiber reinforced polyamid PA66Not recordedWithout — Bearing not greased
FAG 7209-B-XL-TVP-UAWithout — Not sealedP6 — Class 6 (ISO 492:2023)Not recordedTVP — Solid cage made of glass-fiber reinforced polyamid PA66Not recordedWithout — Bearing not greased
FAG 7209-B-XL-TVP-UBWithout — Not sealedP6 — Class 6 (ISO 492:2023)Not recordedTVP — Solid cage made of glass-fiber reinforced polyamid PA66Not recordedWithout — Bearing not greased
FAG 7209-B-XL-TVP-UOWithout — Not sealedP6 — Class 6 (ISO 492:2023)Not recordedTVP — Solid cage made of glass-fiber reinforced polyamid PA66Not recordedWithout — Bearing not greased
TIMKEN 7209WNOpenNot recordedNot recordedBrass cageNot recordedNot recorded
TIMKEN 7209WNMBRSUOpenNot recordedNot recordedBrass cageNot recordedNot recorded
TIMKEN 7209WNSUOpenNot recordedNot recordedBrass cageNot recordedNot recorded
NSK 7209AWNot recordedNot recordedNot recordedPressed steelNot recordedNot recorded
NSK 7209AWDBNot recordedNot recordedNot recordedPressed steelNot recordedNot recorded
NSK 7209AWDFNot recordedNot recordedNot recordedPressed steelNot recordedNot recorded
NSK 7209AWDTNot recordedNot recordedNot recordedPressed steelNot recordedNot recorded
NSK 7209BEAT85Not recordedNot recordedNot recordedPolyamide 46 resinNot recordedNot recorded
NSK 7209BWNot recordedNot recordedNot recordedPressed steelNot recordedNot recorded
NSK 7209BWDBNot recordedNot recordedNot recordedPressed steelNot recordedNot recorded
NSK 7209BWDFNot recordedNot recordedNot recordedPressed steelNot recordedNot recorded
NSK 7209BWDTNot recordedNot recordedNot recordedPressed steelNot recordedNot recorded
KOYO 7209BNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 7209BDBNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 7209BDB FYNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 7209BDFNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 7209BDF FYNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 7209BDTNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 7209BDT FYNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 7209B FYNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 7209CNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 7209CDBNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 7209CDB FYNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 7209CDFNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 7209CDF FYNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 7209CDTNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 7209CDT FYNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 7209C FYNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 7209DBNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 7209DB FYNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 7209DFNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 7209DF FYNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 7209DTNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 7209DT FYNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 7209 FYNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded

How to compare these values

  • Use the displayed dimension names and original symbols. Housing length L, height H2 and flange width are not bearing outside diameter D. A catalogue width with an unverified symbol must not be assumed to be inner-ring width B or assembly width T. Open the product record for mounting dimensions and geometry.
  • Inch values are calculated from the recorded millimetres using 25.4 mm per inch, rounded to six decimal places. They do not change a metric bearing into an inch-series bearing. Gram values are converted from the recorded mass in kilograms.
  • C and C0 describe different rating conditions. They are not a single safe working-load limit and cannot replace an application load calculation.
  • Reference and limiting speeds are separate catalogue values. The source grease/oil context is shown where recorded. Lubricant, seals, loads, fit, clearance and cooling affect the usable operating speed.
  • A common base number does not prove equivalent seals, clearance, precision, material or interchangeability. Open the full designation for these fields.
Check load calculations →Estimate rating life →Decode the complete marking →Check replacement evidence →

Related prefix matches — other model numbers may appear

These discovery results can contain a longer number or a different component. They are not specifications for the requested exact model. Open the complete product to inspect its original geometry.

KOYO

7209

Angular contact ball bearing

View full technical record →SKF

7209 ACCBM

Single row angular contact ball bearing with 25° contact angle

View full technical record →SKF

7209 ACDGA/HCP4A

Super-precision, high-capacity, universally matchable single row angular contact ball bearing

View full technical record →SKF

7209 ACDGA/P4A

Super-precision, high-capacity, universally matchable single row angular contact ball bearing

View full technical record →SKF

7209 ACDGB/P4A

Super-precision, high-capacity, universally matchable single row angular contact ball bearing

View full technical record →SKF

7209 ACDGC/P4A

Super-precision, high-capacity, universally matchable single row angular contact ball bearing

View full technical record →SKF

7209 ACD/HCP4ADBC

Matched set of two super-precision, high-capacity, D design, single row angular contact ball bearings

View full technical record →SKF

7209 ACD/HCP4ADGA

Matched set of two super-precision, high-capacity, D design, single row angular contact ball bearings

View full technical record →SKF

7209 ACD/HCP4ADGB

Matched set of two super-precision, high-capacity, D design, single row angular contact ball bearings

View full technical record →SKF

7209 ACD/HCP4AQBCA

Matched set of four super-precision, high-capacity, D design, single row angular contact ball bearings

View full technical record →SKF

7209 ACD/HCP4ATBTB

Matched set of three super-precision, high-capacity, D design, single row angular contact ball bearings

View full technical record →SKF

7209 ACD/P4A

Super-precision, high-capacity, single row angular contact ball bearing

View full technical record →
Filter all 102 prefix results →

Check the drawing before substituting

Nominal dimensions are not shaft-fit tolerances. Different variants can add grooves, flanges, wider rings or assembly components. When the table has different dimensions, the complete designation—not the shared prefix—controls.

Measurement guide →Cross-reference checks →

Reference basis & data limits

Manufacturer terminology is retained in the product records. Technical reference basis: JTEKT Basic Bearing Knowledge (boundary dimensions, tolerance classes and lubrication); NSK Bearing ABCs (lubrication, designations and clearance); NTN technical FAQs (closure codes and component interchange); SKF rolling-bearing selection and maintenance references.

Selection workflows and catalogue grouping are BearingScope editorial aids. Verify the current drawing and application requirements before using a candidate. Missing database information is not converted into an assumed match.

Search the consolidated catalogue

Find, filter and compare bearing model data in one place.

Open model search